hello everybody
I've Flashed my Xperia P with kernel Nemesis_XP_v6.3[ENIGMA]
to recover a backup I've made before in this kernel
after flashing I can't recover CWM backup , it send me MD5 mismatch although I didn't do anything for CWM folder
then I tried to turned the phone off to flash the stock ROM again
but the phone can't turned off !!!
I tried to force shutdown with the power key and volume up for 10 sec then finally the phone turned off
I tried to flash the stock ROM but the phone can't boot to flashmode or fast boot or even boot when it's connected to PC
also I tried to turn it on but it can't with the power button only !!
the phone turn on with "power key + volume up"
please help me what should I do here ??
What happens when you connect in fastboot or flash mode. Any led displayed?
Sent from my Xperia P using XDA Premium 4 mobile app
Hamza Murad said:
What happens when you connect in fastboot or flash mode. Any led displayed?
Sent from my Xperia P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
the phone when is turned off normally you can connect to PC with any mode.
but when I turned it off using Force method (power key + volume up) the phone doesn't respond to any connect to PC !
also it can't be turned on normally (by power key only) !
only when I pressed (power key + volume up) = (the same shutdown method) it turned on
and now I don't know how to let it shutdown normally to flash the ROM
Try the volume up + power while CWM is on and phone connected to the PC, this shult put in fastboot mode, then disconnect and try flash mode.
ChikeD said:
Try the volume up + power while CWM is on and phone connected to the PC, this shult put in fastboot mode, then disconnect and try flash mode.
Click to expand...
Click to collapse
I connected the the phone to PC and it's in CWM then press Power key + volume up until the phone vibrate 3 times but no connection to PC or the flashtool detect the phone !!!
I'm so confused
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
engnajjar said:
I connected the the phone to PC and it's in CWM then press Power key + volume up until the phone vibrate 3 times but no connection to PC or the flashtool detect the phone !!!
I'm so confused
Click to expand...
Click to collapse
Just the one vibration then leave the power, keep volume up
ChikeD said:
Just the one vibration then leave the power, keep volume up
Click to expand...
Click to collapse
the phone is turned off at all !!!!!!!!
maybe the battery is damaged or something like this ??
I try to turn it on by anyway but nothing happen
engnajjar said:
the phone is turned off at all !!!!!!!!
maybe the battery is damaged or something like this ??
I try to turn it on by anyway but nothing happen
Click to expand...
Click to collapse
All you did is flash the kernel and try to restore backup nothig else?
ChikeD said:
All you did is flash the kernel and try to restore backup nothig else?
Click to expand...
Click to collapse
yea , I think the main problem is the battery was drained because after I flash the kernel and can't restore the backup I turned it off from CWM well and plan to flash the ROM but in a moment I decide to turn it on to try to wipe data/Factory reset maybe I could restore the backup .
but the same I couldn't , so I decide to turn it off and flash the ROM , but I couldn't , the phone was not able to turn off from CWM as I did before .
at the end the phone was turned off due to the battery was drained
so I connect it to charger for about 3 hours but as the phone doesn't charge !
and now I'm so scare that maybe the battery or the phone is damaged ..... !
finally the problem is gone
my friend disassembled it and removed the battery cable then re-back
then the phone is able to be charged properly then flash the ROM
Related
Hi
I was using my phone. It suddenly turned off. Now it won't turn on.
When I connect it to a charger there is red light for one second then phone looks dead (no LED, nothing). (normally there was constant red light).
Tried to reset it using buttons, tried connecting it with fastboot mode, flash mode - NOTHING.
What can I do?
Main problem is that this phone is under warranty but it has unlocked bootloader and there was CM9 loaded on it..
take to service centre ,.. if u cant turn it on they cant too
Force off the phone
Volume down plus power button until u feel 3 vibrations
Then dun try to switch on
And try flashing ftf
Sent from my ST25i using Tapatalk 2
drsanket_xperia_u said:
Force off the phone
Volume down plus power button until u feel 3 vibrations
Then dun try to switch on
And try flashing ftf
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
please read topic.
phone is not even charging. reboots using volume down / power are not working.
Fastboot not working
flashmode not working.
Well, will send my phone
kubek1334 said:
please read topic.
phone is not even charging. reboots using volume down / power are not working.
Fastboot not working
flashmode not working.
Well, will send my phone
Click to expand...
Click to collapse
Yes I read it bro
It has never happened before that a phone has hardbricked just by itself
If u send it... U will b asked for money... Alot I mean :/
u can try removing the battery by yourself. then recharge the battery using all purpose chargers like This >>>
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
it will probably work then
probably...
kubek1334 said:
probably...
Click to expand...
Click to collapse
it worth try. better than a Brick
for me this trick worked. not sola though
The bootloader is broken. Send it to the repairing point or use JTAG to flash it.
zhy0919 said:
The bootloader is broken. Send it to the repairing point or use JTAG to flash it.
Click to expand...
Click to collapse
Jtag works for xperia novathors??? :/
kubek1334 said:
Hi
I was using my phone. It suddenly turned off. Now it won't turn on.
When I connect it to a charger there is red light for one second then phone looks dead (no LED, nothing). (normally there was constant red light).
Tried to reset it using buttons, tried connecting it with fastboot mode, flash mode - NOTHING.
What can I do?
Main problem is that this phone is under warranty but it has unlocked bootloader and there was CM9 loaded on it..
Click to expand...
Click to collapse
Take the battery out for about 20 seconds and put it back on again, dont turn it on, press the volume down button and get a usb cable and plug one end to the pc and and the other to ur phone keeping the volume down button pressed. If there is a green light that means it can be fixed.
will send it for warranty.
I didn't agree for extra charge so it wont be a problem,
got my device replaced under warranty
Device was full bricked with unlocked bootloader via sony site (twice!) and loaded cyanogenmod with custom kernel
Heya,
Today my power buttont got stuck and it was always restarting i watched some videos and i decided to go on without a power button, it was working nice i turned my phone on with a little trick but now i wanted to replace my recovery with TWRP i used SkipSoft Android Toolkit and it said me that the recovery was flashed sucessfull... after that i booted into the recovery via adb (adb reboot recovery) and now i dont got TWRP i just see the Stock Recovery but now my problem is i cant select anyhting because my power button is not working and if i take out the battery -> plug it in + usb calbe it boots directly into the stock recovery...
Now my Question is how can i make the phone boot normal again?
And can i access my phone via my pc somehow via Fastboot or adb?
Thats how my recovery looks like:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thx
incaner said:
Heya,
Today my power buttont got stuck and it was always restarting i watched some videos and i decided to go on without a power button, it was working nice i turned my phone on with a little trick but now i wanted to replace my recovery with TWRP i used SkipSoft Android Toolkit and it said me that the recovery was flashed sucessfull... after that i booted into the recovery via adb (adb reboot recovery) and now i dont got TWRP i just see the Stock Recovery but now my problem is i cant select anyhting because my power button is not working and if i take out the battery -> plug it in + usb calbe it boots directly into the stock recovery...
Now my Question is how can i make the phone boot normal again?
And can i access my phone via my pc somehow via Fastboot or adb?
Thats how my recovery looks like:
Thx
Click to expand...
Click to collapse
You could try a usb jig to get into download mode then use volume buttons to reboot phone ( but I don't know if it would boot to recovery again) or you could try flashing another recovery twrp,philz etc while in download mode.... I'm not too sure if adb works in download mode but you could also try that.
tallman43 said:
You could try a usb jig to get into download mode then use volume buttons to reboot phone ( but I don't know if it would boot to recovery again) or you could try flashing another recovery twrp,philz etc while in download mode.... I'm not too sure if adb works in download mode but you could also try that.
Click to expand...
Click to collapse
Yeah im pretty sure that in download mode the Fastboot commands work but i dont got a usb jig so im asking for an another way...
incaner said:
Yeah im pretty sure that in download mode the Fastboot commands work but i dont got a usb jig so im asking for an another way...
Click to expand...
Click to collapse
The only two ways I know of is (1) Fix power button or (2) Usb jig (only a couple of euro's off ebay) maybe someone else knows a betterway good luck.
tallman43 said:
The only two ways I know of is (1) Fix power button or (2) Usb jig (only a couple of euro's off ebay) maybe someone else knows a betterway good luck.
Click to expand...
Click to collapse
I hope so... ill just wait some weeks until ill go to buy a jig..
but thx for your help
Dear XDA Members,
I soft bricked my Nitro A311. I installed Cynogenmod 12.1 and tried to uninstall supersu. Uninstall failed and on rebooting, cynogenmod logo keeps coming indefinitely for days and no progress. I can not use power+volume keys when the device shows cynogenmod logo. On removing battery, the device gets powered off. On connecting the battery and to charger, device automatically goes into the bootloop (not recovery). I am unable to put the device in fastboot or recovery mode. adb detects my device when it is showing cynogenmod logo. I tried to put device into bootloader, recovery, fastboot modes from adb. All fails.
Please help me to recover my device.
Thanks in advance.
ravi_npatty said:
Dear XDA Members,
I soft bricked my Nitro A311. I installed Cynogenmod 12.1 and tried to uninstall supersu. Uninstall failed and on rebooting, cynogenmod logo keeps coming indefinitely for days and no progress. I can not use power+volume keys when the device shows cynogenmod logo. On removing battery, the device gets powered off. On connecting the battery and to charger, device automatically goes into the bootloop (not recovery). I am unable to put the device in fastboot or recovery mode. adb detects my device when it is showing cynogenmod logo. I tried to put device into bootloader, recovery, fastboot modes from adb. All fails.
Please help me to recover my device.
Thanks in advance.
Click to expand...
Click to collapse
Did u try keeping volume up held while inserting battery?
ravi_npatty said:
Dear XDA Members,
I soft bricked my Nitro A311. I installed Cynogenmod 12.1 and tried to uninstall supersu. Uninstall failed and on rebooting, cynogenmod logo keeps coming indefinitely for days and no progress. I can not use power+volume keys when the device shows cynogenmod logo. On removing battery, the device gets powered off. On connecting the battery and to charger, device automatically goes into the bootloop (not recovery). I am unable to put the device in fastboot or recovery mode. adb detects my device when it is showing cynogenmod logo. I tried to put device into bootloader, recovery, fastboot modes from adb. All fails.
Please help me to recover my device.
Thanks in advance.
Click to expand...
Click to collapse
when u power on the phone......... at that time u need to press and hold power button + volume up untill u get into recovery
Bhushan1985 said:
when u power on the phone......... at that time u need to press and hold power button + volume up untill u get into recovery
Click to expand...
Click to collapse
Thank you Bhushan andSahil for your support.
The problem was with battery. I think it got drained fully during bootloop problem and was not getting charged. Discharge rate might be more than charge rate and due to low battery it kept switched off and on again and again.
I charged battery separately and after inserting battery I could enter into recovery mode. I flashed cyanogenmod and it is working cool!
Thanks for all your support.
how did you charged battery seperately
abhishek biswas said:
how did you charged battery seperately
Click to expand...
Click to collapse
Through Direct battery charger. Not with phone.
means explain it properly use photo
abhishek biswas said:
means explain it properly use photo
Click to expand...
Click to collapse
Hope the photo helps you to understand....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
is switching off phone and then charging does not work or charging does not support on twrp
abhishek biswas said:
is switching off phone and then charging does not work or charging does not support on twrp
Click to expand...
Click to collapse
When connecting charger in switched off condition, phone was automatically starting. so it was draining more than charging and again getting switched off. Any how, now the problem is solved.
Hello everybody, I have a problem with my s8 plus Samsung, suddenly my phone froze, and begin to restart, almost 15 times or more. Then I did a force restart by holding volume down and power button, and after then its start-up usually for 10min, and again restarts, after I connecting to the power cable to changing, it stops charging. Then didn't response for nothing. DEAD, and after I leave it for a couple of hours, I tried to enter safe mode and to wipe cache memory. I thought maybe some app is causing a problem, and I run a test, and it shows me like this. On google, I found that probably is the motherboard, but somebody says its maybe last android update. And my friend says that perhaps it is RAM. Can somebody help me, I only want to access my phone to enter the gallery and save photos, then after that, the phone can be lifetime dead, it doesn't concern me. Thanks for helping me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
dzi022 said:
Hello everybody, I have a problem with my s8 plus Samsung, suddenly my phone froze, and begin to restart, almost 15 times or more. Then I did a force restart by holding volume down and power button, and after then its start-up usually for 10min, and again restarts, after I connecting to the power cable to changing, it stops charging. Then didn't response for nothing. DEAD, and after I leave it for a couple of hours, I tried to enter safe mode and to wipe cache memory. I thought maybe some app is causing a problem, and I run a test, and it shows me like this. On google, I found that probably is the motherboard, but somebody says its maybe last android update. And my friend says that perhaps it is RAM. Can somebody help me, I only want to access my phone to enter the gallery and save photos, then after that, the phone can be lifetime dead, it doesn't concern me. Thanks for helping me
Click to expand...
Click to collapse
From recovery reboot too bootloader and reflash stock firmware using odin
Sent from some device I modified
jrkruse said:
From recovery reboot too bootloader and reflash stock firmware using odin
Sent from some device I modified
Click to expand...
Click to collapse
Is it possible then to save photos?
Flash the BL and AP and CP along with home csc file not regular csc file and skip the data file
Sent from some device I modified
jrkruse said:
Flash the BL and AP and CP along with home CSC file, not regular CSC file and skip the data file
Sent from some device I modified
Click to expand...
Click to collapse
I will try that, when I turn on the device, now it's frozen again, and I think it is turned off, because I can't turn on, but the battery is 100% charged.
dzi022 said:
I will try that, when I turn on the device, now it's frozen again, and I think it is turned off, because I can't turn on, but the battery is 100% charged.
Click to expand...
Click to collapse
Honestly you are probably going to have to wipe data but you can try
Sent from some device I modified
jrkruse said:
Honestly you are probably going to have to wipe data but you can try
Sent from some device I modified
Click to expand...
Click to collapse
Thank you, i will try that. Will post update when finish.
dzi022 said:
Thank you, I will try that. Will post update when finish.
Click to expand...
Click to collapse
Finally, after almost 12h, I successfully power on my phone, and when I turn on, it showed me this error. Now I think maybe is everything ok with the motherboard because when I type on google this problem, it says that after Samsung Knox update, many users have this problem with the phone.
dzi022 said:
Finally, after almost 12h, I successfully power on my phone, and when I turn on, it showed me this error. Now I think maybe is everything ok with the motherboard because when I type on google this problem, it says that after Samsung Knox update, many users have this problem with the phone.
Click to expand...
Click to collapse
Its not a problem you enter it by holding the bixby +pwr+vol dwn buttons at the same time Its called download mode or bootloader mode this is where you flash stuff in odin after you press the volume up button to continue like it says. So now flash the stock firmware
Sent from some device I modified
Hey everyone , I ran into some trouble with my device and I thought this is the only place I could find a solution,
I was trying to root my samsung tab a (2019) (SM-T515) , but something went wrong after flashing twrp ( specially made for tab a ) and ever since my phone is stuck on the main "Samsung galaxy tab A secured by knox" screen with a yellow triangle symbol below it , it isn't being detected by my PC anymore either. This is what I did in steps:
1)Unlock OEM
2)Go in download mode and flash twrp , it said "pass" and I had auto-reboot off , so I rebooted and got stuck here.
I have tried the power button , it doesn't do anything , also the volume up + power key (recovery mode) doesn't do anything either.
Also I tried the volume down + power button , it restarts the phone and puts it back to the same screen after this message ( see attached imgs ).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
^ stuck on this
Would a USB Jig work in this case?
Hold Power + Vol Down for 7 seconds, then immediate switch to Power + Vol Up to enter TWRP. If that doesn't work, attached USB cable, hold Power + Vol Down for 7 seconds, then switch to Vol Up + Vol Down to enter Download Mode. From there you can flash a known-good OEM build with Odin.
Magendanz said:
Hold Power + Vol Down for 7 seconds, then immediate switch to Power + Vol Up to enter TWRP. If that doesn't work, attached USB cable, hold Power + Vol Down for 7 seconds, then switch to Vol Up + Vol Down to enter Download Mode. From there you can flash a known-good OEM build with Odin.
Click to expand...
Click to collapse
I tried but it isn't doing anything . I just can't seem to enter download mode whatsoever.
bump , please help
ItsHenry said:
I tried but it isn't doing anything . I just can't seem to enter download mode whatsoever.
Click to expand...
Click to collapse
It's possible. When I first started developing for this tablet, I gave up and was ready to let the damn battery drain to reset the device. After about a week, I tried again and finally got the timing right. You need to hold for just a little over 7 seconds, enough so that the reset begins and the screen goes blank. When that happens, immediately switch to the Vol Up & Vol Down combo. (Also, don't forget that you have to have the USB cable connected. It won't work without that.)
Magendanz said:
It's possible. When I first started developing for this tablet, I gave up and was ready to let the damn battery drain to reset the device. After about a week, I tried again and finally got the timing right. You need to hold for just a little over 7 seconds, enough so that the reset begins and the screen goes blank. When that happens, immediately switch to the Vol Up & Vol Down combo. (Also, don't forget that you have to have the USB cable connected. It won't work without that.)
Click to expand...
Click to collapse
Heres what I do ,
1. Attach USB
2.Reset it (vol. down + power)
3.This screen opens
4.I immediately hold Vol. Down + Vol. Up
5.After like 2 seconds, this screen shows up, demanding me to press the power button
6.I ignore it and keep holding vol. down + vol. up, after a while , it goes away automatically , and goes back to this screen
And stays there
Ok , I do not know what I did , but somehow its in download mode now. well thanks for the help @Magendanz , what now , I flashed the original firmware , the tablet started, do I try to root it again?
Is your TWRP version ok for T515?
Also, I was asked to factory wipe the device cause the data was somehow corrupted , idk why was that cause , maybe the twrp version isn't stable? I don't know if I should try again or not.
ItsHenry said:
Ok , I do not know what I did , but somehow its in download mode now. well thanks for the help @Magendanz , what now , I flashed the original firmware , the tablet started, do I try to root it again?
Click to expand...
Click to collapse
I'd flash the OEM firmware, just to go back to a known-good state.
ItsHenry said:
Is your TWRP version ok for T515?
Click to expand...
Click to collapse
Well, I don't have a T515, and so I really can't say for sure. I build the custom kernel from the latest SM-T515 kernel source and follow the same build process as I use for the T510, but I'm relying on others to test it. I can only say for sure that the SM-T510 builds work.
ItsHenry said:
Also, I was asked to factory wipe the device cause the data was somehow corrupted , idk why was that cause , maybe the twrp version isn't stable? I don't know if I should try again or not.
Click to expand...
Click to collapse
If you didn't install Multidisabler, then the fstab will require encryption. If you wiped it in TWRP, rebooting to system will insist the user partition be reformatted with encryption before it will proceed unless dm-verity is disabled.