[Q] Freelander PD103GS customRom - Android Q&A, Help & Troubleshooting

Hello Team,
I bought this Freelander PD103GS. It has Dualsim and a function that I can call to other persons.
Here is a website from which i bought this Thing from Efox-schop.com
it has 1024*600 Android4.2 7'' Dual Core 1.2GHz MTK8312 Bluetooth
At first this machine works very great. But i missed the function landscape in a call.
so I want to switch of the phone.apk and phone.odex,
but i deleted this two files.
so i want to flash a custom rom for this machine.
I can do that only with the function apply update from SDcard
so can everyone please help me.
I have no chance to connect with my pc. I only can take the SDcard in the SDCard-slot of the PC.
Thanks in advance
Kristus1988

Kristus1988 said:
Hello Team,
I bought this Freelander PD103GS. It has Dualsim and a function that I can call to other persons.
Here is a website from which i bought this Thing from Efox-schop.com
it has 1024*600 Android4.2 7'' Dual Core 1.2GHz MTK8312 Bluetooth
At first this machine works very great. But i missed the function landscape in a call.
so I want to switch of the phone.apk and phone.odex,
but i deleted this two files.
so i want to flash a custom rom for this machine.
I can do that only with the function apply update from SDcard
so can everyone please help me.
I have no chance to connect with my pc. I only can take the SDcard in the SDCard-slot of the PC.
Thanks in advance
Kristus1988
Click to expand...
Click to collapse
Mate the only thing you can do it to connect it to your pc via adb mtk vcom drivers and then make a full backup with mtk droid tools for pc, afterwards prepare the backup for sp flash tool and add the files that you are missing in it. Then reflash with sp tool and you are good to go.

Related

[Q] Camera Flash is not working ?!

HI everyone,
I bought a HTC HD2 some days ago, and there was win mobile 6.5 and android 2.2 installed. THere were many problem on the Android OS, it was very slow, the auto-rotate function didnt work, the "water scale" didnt also work correctly etc. Win Mobile seemed to work properly...
Today, I installed android 2.2 on my storage card and everything is working fine so far. Of course, WIN MOBILE is on my phones memory. Before installing it, the phone had problems with the flashlight (dual flash), simply, it did not work. Now, it is also not working, neither under WIN Mobile nor ANDROID.
How can I check that it is a hardware failure ? Or maybe its ROM or something ?
Thank you
Please, some idea ?
What level is the battery at? As I think thart below 20% the flash stops working.
What happens in WinMo when you run the camera and select flash always on and then take a picture?
THanx for the response, I really need some help.
Under WinMo occurs the same problem, the flash is not working even if I set it to AUTO/ON/OFF.
I also considered that the image quality after taking a picture and comparing it to my friends phone, is more bad than his one
PLEASE, someone help ?
Anyone has an idea ?
vedolino said:
Anyone has an idea ?
Click to expand...
Click to collapse
Hi There
I'm not aware of any "diagnostics" modes to test hardware on the device but the first thing I would do from within Winmo is install a Torch App and try and use the torch, if the Torch app initialises the flash on the back of the phone then you know it's a OS fault whereas, if it doesn't you know it's a hardware fault with the flash module itself on the phone
Here's a link to TorchButton
http://forum.xda-developers.com/showthread.php?t=581382
Let us know how you get on
Thank You very much for the reply.
But I act as a noob.
I copied the whole unrar-ed folder to my SD and to phone, in both ways, when I try to start any of those files it says:
There is no application associated with ... Run the application first, then open this file from within the application.
How to run the application ?
Can someone just download the TORCH and explain to me how to install it
Would be very very thankful.
Can someone just explain me how to install or whatever the torch on my HD2 WIN Mobile 6.5.
THanx
anyone ?
thx
Do not unpack (unzip, unRAR) the file. Just copy it to your phone (or SD card). Use the phone's file explorer and find the file. click on it, and it will install.
.cab files are cabinet files, they pack other files inside them, just like zip files - but they are used in both Windows (the computer o/s) and the WinMo o/s as a unpack and install file (obviously the file should only be run in the desired o/s).
Thank You fred_up,
I barely did it, but the flash is still now working.
I hope its only the flex cable which is not too expensive, about 10 USD !?

How can I root my Chinese Dual Sim Android (ICS)?

Hi, all I'm new in this forum and I have some problems with my Android mobile phone. Well, my device is a "CHINESE" Android Phone (f*ck!):crying: and for this reason I can't root my device noway. Some weeks ago I connected in debbuging mode my Android to PC using an Universal Android Driver (Universal ADB), well up here. I opened the software Unlockroot (Free) and the software detected at the first my sh*t device. I just clicked in the button: ROOT in the middle of the screen. It begun to work and the line was loading very quicly. Later my phone was restarted and I had just a ROOT device. The reason for I wanted (and I still want) is because my mobile phone only has 200MB for apps and use 100MB for system and others, I tryed deleting davilk-cache, data, others systems files....but when I installed around 5 apps the memory was full and I think: WTF? WTF?...well I see some tutorials about how to win memory, splitting my SD Card, putting one partiton in EXT2 format for Apps and another for Files in FAT32 format. So, it was going so well. I installed the app SD2link and I link all the apps with SD2link...So, I thought: Good, very good, my little friend. But the problems had started. I notice, when I installed a random app from Google Play Store the phone was restared alone, without touching anything. Also it did the same when I wanted to open a installed random app.After a few days the screen rotation stopped working and when I opened an app the devices was restarted like a brick. However, I could fix with a factory wype or factory reset. I never thought that I was a cause of rooting my device...for this reason I unrooted and I went to the shop for change my device and they changed my device for another (new). Later with the new phone in my hand I rooted again with Unlockroot and I had the same problems, so I unroot the new device and I found info about root any android phone with just a click. I found SuperOneClick and that was the worst choice in my life. When the software finished I tryed to turn on my device...I couldn't because it was bricked and I was very nervous, because I had and Math exam and I had in the device my calculator (MathStep XD)...I couldn't turn on, and neither flash the device. The next day I going to special shop technical and then They fix my phone (I don't know how, but now goes well) and now my question:
I tried with all methods to be root: specials for chineses androids, universal root method, SuperOneClick (brick), Unlockroot (free and Pro ver.), Bin4ary Scripts, and others softwares, even manually ROOT with SDK and ADB, but any of these methods goes in my phone. CAN I ROOT MY DEVICE? HOW? Also I need say that I can't do any udapte from SDCard, I can't install anything from Recovery it says: Error. E: failed mount.... and then Installation Aborted. I can't installed Clockwork Mod for Root method too... so now: :crying: :crying: :crying: :crying: :crying: :crying:
My Device:​
Features I-Joy i-Call 300 Dual Red Royalty​Display 3.5 "
1GHz Processor
Dual sim card
Bluetooth
3G Connection
Camera 5 Megapixel
Includes 4GB Micro SD
free Phone
Specifications.
Display:
TFT capacitive touch screen 3.5 "
Resolution 320 * 480 px
Multitouch 5 points
CPU:
Processor: MTK6575-M ARM Cortex A9 1GHz
GPU Power VR SGX531
Memory RAM / FLASH: DDR3 512 MB ​​/ 512MB
+ 4GB Micro SD Card
Android OS 4.0.4
G-sensor
Connectivity:
Wi-Fi 802.11 b / g / n
2G Network (MHz): GSM 850/900/1800/1900 MHz
3G WCDMA Network (MHz): 850/1900, 900/2100 MHz
Bluetooth
GPS + AGPS (30min or more to find GPS, and later it disconnect very quickly)
Other Features:
Dual sim card
Li-ion Battery: 3.7V 1500mAh
FM Radio
0.3 Megapixel Front Webcam
Back camera 5Mpx FLASH (FAKE, SUPERFAKE, lol)
Micro USB
Micro SD (up to 32GB)
Headphone mini jack 3.5 mm
Dimensions / weight: 119 x 62 x 13.5 mm / 119 g​
SORRY FOR MY BAD ENGLISH I TRY TO DO THE BEST...AND SORRY TOO FOR THE BIG STORY OF MY LIFE. THANKS FOR HELPME. REGARDS EVERYONE.
Have you tried a program named MTK Droid Root&Tools?
root chinese android
RoberGalarga said:
Have you tried a program named MTK Droid Root&Tools?
Click to expand...
Click to collapse
I'm not sure, man. Probably, but I going now to test it. Another thing that I said that later of the brick the phone isnt' the same than before. Also I'm not sure if it is a problem of the little pc of my father (A sh*it of PC: Acer Aspire One) or is cause of mobile phone, because my device connected and discconected alone from USB port every 5seg. or not connect nothing.
Sorry again for my bad english. I'm studying english but in Spain...You can't wait so much.
Thank, bro.
RoberGalarga said:
Have you tried a program named MTK Droid Root&Tools?
Click to expand...
Click to collapse
Now I see the software and I didn't test it never, so I going to test in few hours...when I can, now I can,t because I go to my apartment in the beach. Thanks so much, thanks so much, thnaks so much XD
PS: When I will test I will comment you if this software goes well or I will have a brick...Thanks again.

[Q] Lockscreen translation LEWA on Colorfly i898 Android KitKat 4.4.4

Hello, I have a tablet Colorfly i898A with Android kitkat 4.4.4 with Lewa OS, I have rooted the device and I installed Google Apps, but the lockscreen shows chinese text and I would like to translate to english.
¿Where are the lockscreen theme/language files?
I attach a screenshot
Thanks in advance.
how to?
Hello can you please explain how you rooted and installed gapps cause i am trying to do it and i cant... I just received the exact same tablet but play store is not working
And i also have this same problem not as big of an issue as the gapps though.
Thanks in advance for your answer and time
I rooted the tablet using iRoot windows app, just enable USB debugging and connect the tablet to USB and run de software. it is in chinesse, just press the green button and it starts the process.
I cant give you exact steps to install Gapps, I downloaded a Gapps zip file from a very similar tablet (I dont remember the model, maybe Onda, with same intel CPU and same screen resolutions) ready to flash from custom recovery but I installed manually the files extracting the zip into my computer and moving manually into the tablet, in the correct folders and giving permissions. After some hours of work finally success with no errors and Play store is working fine.
Sorry if I cannot give you more detailed info.
Your reply helped me a lot ! Thanks i will try the iroot I can manage the flashing from there thanks again
LEWA colorfly i898
Hi dear
Im very interested to buy this tablet. Where can i download lewa for this model?
Thanks!!
puffff said:
I rooted the tablet using iRoot windows app, just enable USB debugging and connect the tablet to USB and run de software. it is in chinesse, just press the green button and it starts the process.
I cant give you exact steps to install Gapps, I downloaded a Gapps zip file from a very similar tablet (I dont remember the model, maybe Onda, with same intel CPU and same screen resolutions) ready to flash from custom recovery but I installed manually the files extracting the zip into my computer and moving manually into the tablet, in the correct folders and giving permissions. After some hours of work finally success with no errors and Play store is working fine.
Sorry if I cannot give you more detailed info.
Click to expand...
Click to collapse
Hello, the first thank you for all but i have one cuestions for you, how you put the Gapps because i have a tablet the same and i would like put de play store and thank for all
Hello! Does anyone know where can a BIOS image for the Colorfly i898A 3G be found?

android on a TL10IE2 (panasonic/intel and ECS-elitegroup)

howdy ,
i hope i am posting in the right area ... i looked around and didn't see anything specifically related .
i recently acquired one of the intel "educational" tablets that (according to lore) was actually manufactured by a third party while panasonic and intel put their name on it .
intel did provide the uPC ... Z3740D / 1.8 GHz / Quad Core :
this machine also goes under the name of "3E" .
i loaded W10 on it to check it out and installed the drivers .
it works nicely , is fairly quick in response and the display looks very acceptable for a tablet .
it is a dual touch and actually has two speakers on the front corners !
the machine looks like it was never really used ... it just sat on a shelf in some school .
in short , for 65 bucks i got a *new* pad w/cradle-keyboard and power supply .
now , for the why i am here part .
i am not a W10 fan by any stretch of the imagination , so i figured i would try loading linux mint or android on it .
forget linux anything ... it will not load , the uefi and secureboot flag it .
(a couple other guys over at the panasonic forum at notebookreview have tried as well)
what did load was a copy of remix 6.xx (shock shock !) , but it choked and puked at random times .
sooo ... i went and got a copy of 7.1.2rc ... i was able to load it and it does work nicely ... for the most part .
there are three major issues :
microphone does not work
auto-rotate does not function
gps not found
and that is why i am here ... seeking help with these issues .
i have a theory that perhaps one of the true mobile builds might work but i have no idea on where to start .
there has been a lot of those units like i bought dumped on the market recently ...
i think they would make good units for kids to use (and adults as well) .
thanks for your time in advance .
ps ... i just discovered that this is the wrong section , please move to the general Q&A .
Required windows 10 drivers for Panasonic 3e tablet (TL10IE2)
I was also using the same. I formatted and installer windows 10 and now there is a problem installing drivers. If you can please share with me the required Drivers for windows 10.
Thanks in advance.
Sherimran said:
I was also using the same. I formatted and installer windows 10 and now there is a problem installing drivers. If you can please share with me the required Drivers for windows 10.
Thanks in advance.
Click to expand...
Click to collapse
Hey Sherimran,
I'm also suffering the same problem as you.
I did a clean install of W10 and that's where all the problems began.
Nothings working except the display(not touch) and the usb ports.
Did you manage to get your hands on the drivers???
abkmadni said:
Hey Sherimran,
I'm also suffering the same problem as you.
I did a clean install of W10 and that's where all the problems began.
Nothings working except the display(not touch) and the usb ports.
Did you manage to get your hands on the drivers???
Click to expand...
Click to collapse
Hey there,
Still trying, no success till now
Solution of missing drivers not working tablet panasonic 3E
Sherimran said:
Hey there,
Still trying, no success till now
Click to expand...
Click to collapse
Hello every body, sorry by mi english but not are my mother language
You need install the intel driver for the pc stick atom bay trail "System-on-a-Chip (SOC) Driver Package for STCK1A32WFC"
the program say that the drivr you want to install are older, ingore and proced. (search the model of the stick above in intel page)
the driver of the camera that are working in my tablet are
Main Camera
OV5693 version of driver 603.9600.1948.46966 [07/08/2014]
Front Camera
MT9M114
For the audio
Intel SST Audio Device (WDM)
Version of driver 603.9600.1948.30594 [22/11/2013]
Realtek I2S Audio Codec
version of driver 6.2.9600.4053 [20/11/2013]
I hope you get as mine working again
My Regards

I need HELP with a MTK device

Hello friends of the forum, this is my first post, I see myself in the need to create it because I need more than all of their knowledge.
I explain, I have an MTK device, in details it is a Logic x5 Lite 2. It is a mtk6580 with 512mb of ram, 8gb of internal memory, a screen of 5 "(480x854) with android 5.1.
The problem is that i need to reflash the rom because every time shows "the application has stopped". But the rom stock of this model is not found anywhere.
So what other options i have to be able to recover the device? I tried with mtk droid tools but it does not reconnect, and I have all the drivers installed.
Thanks in advance. PD my English is very bad, I hope your compression. :good:

Categories

Resources