android on a TL10IE2 (panasonic/intel and ECS-elitegroup) - Android Q&A, Help & Troubleshooting

howdy ,
i hope i am posting in the right area ... i looked around and didn't see anything specifically related .
i recently acquired one of the intel "educational" tablets that (according to lore) was actually manufactured by a third party while panasonic and intel put their name on it .
intel did provide the uPC ... Z3740D / 1.8 GHz / Quad Core :
this machine also goes under the name of "3E" .
i loaded W10 on it to check it out and installed the drivers .
it works nicely , is fairly quick in response and the display looks very acceptable for a tablet .
it is a dual touch and actually has two speakers on the front corners !
the machine looks like it was never really used ... it just sat on a shelf in some school .
in short , for 65 bucks i got a *new* pad w/cradle-keyboard and power supply .
now , for the why i am here part .
i am not a W10 fan by any stretch of the imagination , so i figured i would try loading linux mint or android on it .
forget linux anything ... it will not load , the uefi and secureboot flag it .
(a couple other guys over at the panasonic forum at notebookreview have tried as well)
what did load was a copy of remix 6.xx (shock shock !) , but it choked and puked at random times .
sooo ... i went and got a copy of 7.1.2rc ... i was able to load it and it does work nicely ... for the most part .
there are three major issues :
microphone does not work
auto-rotate does not function
gps not found
and that is why i am here ... seeking help with these issues .
i have a theory that perhaps one of the true mobile builds might work but i have no idea on where to start .
there has been a lot of those units like i bought dumped on the market recently ...
i think they would make good units for kids to use (and adults as well) .
thanks for your time in advance .
ps ... i just discovered that this is the wrong section , please move to the general Q&A .

Required windows 10 drivers for Panasonic 3e tablet (TL10IE2)
I was also using the same. I formatted and installer windows 10 and now there is a problem installing drivers. If you can please share with me the required Drivers for windows 10.
Thanks in advance.

Sherimran said:
I was also using the same. I formatted and installer windows 10 and now there is a problem installing drivers. If you can please share with me the required Drivers for windows 10.
Thanks in advance.
Click to expand...
Click to collapse
Hey Sherimran,
I'm also suffering the same problem as you.
I did a clean install of W10 and that's where all the problems began.
Nothings working except the display(not touch) and the usb ports.
Did you manage to get your hands on the drivers???

abkmadni said:
Hey Sherimran,
I'm also suffering the same problem as you.
I did a clean install of W10 and that's where all the problems began.
Nothings working except the display(not touch) and the usb ports.
Did you manage to get your hands on the drivers???
Click to expand...
Click to collapse
Hey there,
Still trying, no success till now

Solution of missing drivers not working tablet panasonic 3E
Sherimran said:
Hey there,
Still trying, no success till now
Click to expand...
Click to collapse
Hello every body, sorry by mi english but not are my mother language
You need install the intel driver for the pc stick atom bay trail "System-on-a-Chip (SOC) Driver Package for STCK1A32WFC"
the program say that the drivr you want to install are older, ingore and proced. (search the model of the stick above in intel page)
the driver of the camera that are working in my tablet are
Main Camera
OV5693 version of driver 603.9600.1948.46966 [07/08/2014]
Front Camera
MT9M114
For the audio
Intel SST Audio Device (WDM)
Version of driver 603.9600.1948.30594 [22/11/2013]
Realtek I2S Audio Codec
version of driver 6.2.9600.4053 [20/11/2013]
I hope you get as mine working again
My Regards

Related

wi Modem usb Driver.zip

usb driver.zip for wi modem
Installation of HTC USB modem driver into Windows XP
I am sorry to bother here, unfortunatelly, I have a problem. I can not install the USB driver into Windows XP on my PC. If I open an inf file, no modems are listed. I have Win XP home CZ (Czech). What could be a problem? Bad driver? Is there another driver? Thank you very much for your answer.
Novka
unfortunately
these are for an XDA II ... so we are still at the
"How can we use XDA I as a wireless modem on WM2003 (except the DE version) ?" stage.
Anyone has options or solutions. I hate to carry another GPRS phone along the XDA just to connect my laptop.
xda-modem
you can look at : http://www.myxda.com/downloads/swupgrade/setup modem_win2k.pdf
Re: xda-modem
donnyriyadi said:
you can look at : http://www.myxda.com/downloads/swupgrade/setup modem_win2k.pdf
Click to expand...
Click to collapse
This is a great howto document but my understanding is (and I have checked on my PPC) their is no wmodem.exe software.
The problem is as follows.
The entire wmodem is using rilgsm (and the radio software part) in order to work.
So from this poin it is impossible to make it happen.
What I suggested, but since my PPC programming skills are low, is to find a program that simulates a proxy on our XDA. Meaning that the XDA is used as a gateway from the computer.
The proper definition is, i think, "reverse passthrough".
The starting point can be the Remote Control software that display the XDA image on PC ...
Anyone has seen such app ... or has it in development ?
Decebal
wireless modem
i had a standard german rom as i bought my xda, and there was also no wireless modem app.
but if you install another rom, like the wm2003 one, or the special rom from xda-developers, the wireless modem app is already installed.
my problem is, when i connect my modem after a while(about 15-20 minutes) or if i open more than one webpages at the same time, the modem doesn't work anymore, and i have to reset my xda. I have tried with another handphone(nokia 6800) and it worked properly. Does anyone knoe why this happened ?
The starting point can be the Remote Control software that display the XDA image on PC ...
Anyone has seen such app ... or has it in development ?
Click to expand...
Click to collapse
there is one from microsoft. its called remote display control. but it only work with activesync, and if the activesync connected to xda, the internet connection from the xda won't be used, instead the xda will try to connect via your pc.
Small point... if you look at benmuliono's post it was for XDA2 not XDA1...
HTC USB modem driver
Good day,
about my post, there is a misunderstanding. There is no problem with XDA I or XDA II and wireless modem application (for the present). There is a problem with a driver usbmdm.inf and its installation into the Win XP CZ, because the USBMDM.INF file is not recognized as the driver by my Win XP CZ (HTC USB modem does not appear in installation window).
Thus, if the wireless modem application is running on the XDA, the info "new hardware is detected ..." appears. Then, I want install the modem into the system, but I am not succefull.
I try to make connection with XDA II of my friend, although I am an owner of XDA I (which is shown in left side). That is probably the source of the misunderstanding.
I am looking for somebody who has similar problem or has a working driver for my system and would be so kind to send it to me ([email protected]).
Thank in advance for your help,
Novka1234
xda as modem for laptop
After 3 months and 463 hairs later, I have finally figured a work-around for turning our xda (1)'s into a USB modem for internet access via GPRS. I will have it available for download on my website for only $20.00 beginning 7/20/04. it will be available through PAYPAL only. (I know this is worth a lot more than twenty dollars, but I wanted everyone who wants it to be ablle to afford it.)
how
how can you demonstrate this first.
this is interesting ... but a.f.a.i.k. it is not possible.
are we talking about any WM2003 ROM and only with the wmodem software ?
F.A.I.K.
it will be available for any english wm 2003 rom , (propriatary) software pkg,
I understand the skeptisism, but will not be releasing a demo or trial version. this has always been possible as I understand it, it has just been squashed by the manufacturers and software giant. just a couple more days and everyone will be happy.
DMW
good
this will be indeed great. i'm close to buy an expensive pcmcia GSM card for my laptop but this will be a great alternative.
can you tell me this:
* the pc will use all ports for connexions (not limited lika a proxy) ?
* will the receive function be disabled or when a call comes it just suspend data and allow call ?
* do we need to install software on xda and pc too ?
* are there any inconveniences from your point of view ?
* can you at least post some screenshots or anything "tangible"
* what transfer rate have you achieved ?
Thanks for your ideea and making it practical.
?
i guess that no news is bad news.
so be it!
XDAII i modem failure
hello frns, i am getting a strange error since 2 days it says"error:692,
hardware failure of the connecting modem"
i am using my XDAIIi PPC to access net on my PC. i have installed the HTC
USB modem for the device.
when i run the query it works fine and give erything in success but when i
try to dial it gives me the above error. i was able to connect it before
but now it is not working.
i am having airtel postpaid connection in M.P.
also before i used to get the connection light up in the wireless modem
dialog on my PPC but even that is not there now. please help me with that.
wht should i do to get the net running up again. i there any other drivers
which i should use or what??
usbmodem for xdaIIi
Thank you, got the USBMDM from here. the files above is still working. AFtet install it the setup is done till finish. No problem, it works on my ppc. Now I don't to worry getting into the net via my xdaIIi.
Wow, this is really great. I'm using the MDA Vario to connect to the internet.
Works great!!!
possible fix for "Error 692"
@puneet_84:
I too followed the installation instructions exactly, but had Error 692. After extensive web-searching, found the solution. Hope it works for you - it did for me. (But no guarantee!)
http://www.ppcsg.com/index.php?showtopic=78789
On trial and errors testing out various config changes I found that the key cause of my XP popping out the Error 692 is when I disabled Modem Compression at any end whether one and not the other or both (meaning the setting at modem properties in the Control Panel and the modem properties in the Dialup networking sections).
The fact is Modem Compression must be enabled on the Control Panel modem properties for the HTC USB modem and the modem properties in the corresponding dialup networking configuration.
Click to expand...
Click to collapse

[Q] Camera Flash is not working ?!

HI everyone,
I bought a HTC HD2 some days ago, and there was win mobile 6.5 and android 2.2 installed. THere were many problem on the Android OS, it was very slow, the auto-rotate function didnt work, the "water scale" didnt also work correctly etc. Win Mobile seemed to work properly...
Today, I installed android 2.2 on my storage card and everything is working fine so far. Of course, WIN MOBILE is on my phones memory. Before installing it, the phone had problems with the flashlight (dual flash), simply, it did not work. Now, it is also not working, neither under WIN Mobile nor ANDROID.
How can I check that it is a hardware failure ? Or maybe its ROM or something ?
Thank you
Please, some idea ?
What level is the battery at? As I think thart below 20% the flash stops working.
What happens in WinMo when you run the camera and select flash always on and then take a picture?
THanx for the response, I really need some help.
Under WinMo occurs the same problem, the flash is not working even if I set it to AUTO/ON/OFF.
I also considered that the image quality after taking a picture and comparing it to my friends phone, is more bad than his one
PLEASE, someone help ?
Anyone has an idea ?
vedolino said:
Anyone has an idea ?
Click to expand...
Click to collapse
Hi There
I'm not aware of any "diagnostics" modes to test hardware on the device but the first thing I would do from within Winmo is install a Torch App and try and use the torch, if the Torch app initialises the flash on the back of the phone then you know it's a OS fault whereas, if it doesn't you know it's a hardware fault with the flash module itself on the phone
Here's a link to TorchButton
http://forum.xda-developers.com/showthread.php?t=581382
Let us know how you get on
Thank You very much for the reply.
But I act as a noob.
I copied the whole unrar-ed folder to my SD and to phone, in both ways, when I try to start any of those files it says:
There is no application associated with ... Run the application first, then open this file from within the application.
How to run the application ?
Can someone just download the TORCH and explain to me how to install it
Would be very very thankful.
Can someone just explain me how to install or whatever the torch on my HD2 WIN Mobile 6.5.
THanx
anyone ?
thx
Do not unpack (unzip, unRAR) the file. Just copy it to your phone (or SD card). Use the phone's file explorer and find the file. click on it, and it will install.
.cab files are cabinet files, they pack other files inside them, just like zip files - but they are used in both Windows (the computer o/s) and the WinMo o/s as a unpack and install file (obviously the file should only be run in the desired o/s).
Thank You fred_up,
I barely did it, but the flash is still now working.
I hope its only the flex cable which is not too expensive, about 10 USD !?

[Q] How to unlock the Chinese Huawei Ascend Glory+ [T8950]

Hi,
I first tried the method below:
Is someone trying to develop a Custom ROM for the Huawei Ascend G600 (U8950D)?
http://forum.xda-developers.com/showthread.php?t=1943003​
But the phones are not just different band versions, as mentioned in post 58 of the thread above. The T8950 is not kernal compatible with the U8950D:
http://www.jetdroid.org/forum/viewtopic.php?f=106&t=8383​
Indeed, the T8950 is equipped with MTK6517 dual-core processor, the MT6517 and MT6577 are the same, A9 architecture 40nm processor, clock ed speed is 1.0Ghz.
http://defendgun.com/2013/01/22/mobile-customized-huawei-glory-t8950-listed-price-at-261/​
I don't pretend to have any knowledge about rooting phones, I just was able to find the correct information on the web. I spend two weeks figuring this out. So I hope I can save somebody else his time with this information.
this is how I did it.
UNLOCKING THE BOOTLOADER
--------------------------------------------------
the bootloader of the T8950 is not locked, so it does not need to be unlocked. Allight, step one done!
INSTALLING THE CMW CUSTOM RECOVERY TOOL
------------------------------------------------------------------------------
The T8950 does indeed not have a fastboot mode. the CWM custom recovery can be installed by flashing the ROM using the Flash tool of Mediatek
tutorial: http://bm-smartphone-reviews.blogspot.com/2012/05/mt6575-flashing-tutorial.html​the correct files to use in the tutorial can be found here:
- SP_Flash_Tool_exe_v3.1224.01 --> http://www.mediafire.com/?c8lr368ceaqk7tv
- MediaTek DA USB VCOM drivers --> http://www.mediafire.com/?h0ytkyagj0kf89u​
if all went well, you should have a different recovery screen now.
ROOTING
-----------
Tutorial: http://bm-smartphone-reviews.blogspot.com/2012/02/complete-guide-to-clockworkmod-recovery.html
The fileto be used is:
- RootT8950.zip --> http://www.mediafire.com/?je47wz2ozjr7oth​
After the update is finished, reboot . Now, you should see Superuser in your Huawei T8950 app list. You can double check if you have root, using the "got root?" app.-->https://play.google.com/store/apps/details?id=com.island51.gotroot
INSTALLING THE GOOGLE SERVICES
----------------------------------------------------------
Since the the CWM custom recovery tool is installed now and the phone is rooted, it's very simple to add the google services to the phone. I used the GAPPS of Cyanogen. You can find them on many places, e.g.
http://www.needrom.com/mobile/gapps-cyanogen/
choose the right version, most likely your T8950 will have android ICS 4.0.4
istallation is the same as installing the rooting ROM
REFERENCES
----------------------
http://bm-smartphone-reviews.blogspot.com/2012/05/mt6575-flashing-tutorial.html
http://bm-smartphone-reviews.blogspot.com/2012/02/complete-guide-to-clockworkmod-recovery.html
http://www.aiothudanu.com/2013/01/huawei-t8950-install-cwm-recovery-and.html
http://forum.xda-developers.com/showthread.php?t=1911475
http://www.needrom.com/mobile/gapps-cyanogen/
Regards,
TeTTiweTTi
Hey TeTTiweTTi!
I can not say how glad I am that you wrote this tutorial. It seems that this is actually the only tutorial on how to truly unlock the T8950 (at least for non russian-speakers )
Still, I'd have some questions:
How do you install the VCOM driver? I downloaded it, but I can only find .inf files.. How do you install them?
Did you flash the whole ROM or just a part of it, as shown in the tutorial? And what exactly happens when you flash the ROM? Are you able to boot afterwards? It seems to just install CWM - right?
How do you apply the update RootT8950.zip?
Help would be appreciated a lot, since you seem to be the only one who knows how to properly do it
Oh and btw: did everything work for you after flashing the ROM? Or did you encounter any errors?
Cheers,
amannn
Hi, it was indeed not so easy to collect these bits and pieces together
here an answer to your questions
1.
The .inf files are the drivers. There are two ways to install the drivers. One way is to right click on the .inf file and choose "Install". The other way is to start the process with SP Flash Tool and as soon as you plug in the phone a new device will be detected and you have the choice to install the drivers.
Also, it is very important to make sure that you click "Download" first before you connect the device. Actually there is a trick, below the sp flash tool, you will see something that says "USB". Click "Download" and wait for the "USB" to become "Searching". Once it is "searching" then connect the USB. SP-Flashtool should be able to capture it before it disconnects itself again.
2.
yes, you only flash a part of the ROM, so you don't need to have all the files in the SP Flash Tool. Only the ones mentioned in the tutorial. Your phone will boot normal, nothing will be changed yet. But now you will have the CWM custom recovery when you start up in recovery mode.
3.
the linked tutorial is quite clear. Let me know if you cannot reach the page or you encounter a problem.
Regards,
TeTTiweTTi
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Hey TeTTiweTTi!
Thank you very much again for your detailed explanation!
So i think I've installed CWM recovery successful. Therefore, I'm now working on the rooting part.
The RootT8950.zip file needs to be applied, using the "choose zip from sdcard" option from CWM recovery right? When I choose that option, I encounter the error "E:Can't mount /sdcard/". Also when I'm trying to create a backup, it says "Can't mount backup path.". So it seems that there is a problem with accessing the sdcard. I then tried the "mount /sdcard" option, but it also says "Error mounting /sdcard".
Did you have any problem like that? When my phone is booted up, there is no problem with accessing the sd card... Or is there a option how I can check if the sd card is inserted correctly? I guess it's internal and therefore impossible to even remove it..
Your help would be highly appreciated!
Many thanks in advance and best wishes,
amannn
EDIT: I was now able to upload the update with an external micro sd. Therefore everything works so far - thanks again
Similar phone mtk6517 svp s580
Hi
I have this. svp. Phone with ARMV7 ( see cpuz snapshot
)
It says mkt6517 with A5 cortex
I tried jnstalling all drivers linked here for ADB
but windows xp disqualified em as valid drivers for this hardware
Finally I got android device driver to install on
All 3 devices ( see pic- there are 3 devices
That show up )
I don't think this generic driver is the right one
So rooting this is still not done .does anyone hace luck with this device
Any idea ......? With getting the right driver and root
Procedure
I tried eroot too amongst other rooting s/w's
CPU screenshot
CPU screenshot
sieger007 said:
Finally I got android device driver to install on
All 3 devices ( see pic- there are 3 devices
That show up )
I don't think this generic driver is the right one
So rooting this is still not done .does anyone hace luck with this device
Any idea ......? With getting the right driver and root
Procedure
I tried eroot too amongst other rooting s/w's
Click to expand...
Click to collapse
Hi sieger007,
It can be a little bit tricky to install the drivers, since it are .inf files only. But these are the driver files
http://bm-smartphone-reviews.blogspot.be/2012/05/mt6575-flashing-tutorial.html said:
There are two ways to install the drivers. One way is to right click on the .inf file and choose "Install". The other way is to start the process with SP Flash Tool and as soon as you plug in the phone a new device will be detected and you have the choice to install the drivers.
It is very important to make sure that you click "Download" first before you connect the device. Actually there is a trick, below the sp flash tool, you will see something that says "USB". Click "Download" and wait for the "USB" to become "Searching". Once it is "searching" then connect the USB. SP-Flashtool should be able to capture it before it disconnects itself again.
Click to expand...
Click to collapse
This second way worked just fine for me.
You can find the drivers and tools also here
http://mt65xx-tools.4shared.com/
he password to login is bm-smartphone-reviews.blogspot.com.
But always make sure that you trust the sources of the ROM you download and know that it is meant for your phone. After flashing a wrong preloader, your phone will be completely dead (can't be powered on, it will not charge and won't be detected anymore by the computer) and there is no way to recover it.
In order to root you first need to install a custom recovery. In this case it is CWM.
hope this helps
still stuck in driver hell
thanks for your help . I had a previous Chinese MTK (MT6575 ARM A9 cortex ) phone , whose ADB drivers successfully installed when I installed the SDK .
Now this one is MTK6517 ARM A5 Cortex. and none of the methods ( #1 or #2 ) help, in those drivers being recognized.
By method #1 : Right click install - It maybe just copying the driver file to system folder and then on windows would auto detect it when the device is inserted -assuming there is a match .
Method # 2 : Uses the new h/w found dialogue . Not sure if invoking sp_tool is related anyways in invoking that dialogue . It shows up anyways - soon as you plug in the phone .
I could not get the driver files in with the blogspot password to be recognized . Kept giving me "specified location. does not contain info about your h/w msg"
I have the EXACT same problem with ALL drivers hunted on the net , that say MTK driver. Some files say MTK65xx some say MTK_USB_Driver etc.
the h/w ID's and instance IDs associated with the devices are attached .
USB\VID_1782&Pid_5d04&Rev_0229&MI_01
Now the driver.inf file did have one ray of hope with this mention ..wonder if that'd make it compatible with a modified inf file.
But I am lost about HOW to add the h/w ID info ( format and what specific data to add ) to the inf file -most data is of the form VID_eXXX something in that file ( see below quote )
MT6516 USB VCOM drivers\readme.txt
Code:
3. Customers can customize usb2ser_XXX.inf file.
There is a string in the file:
MTK6218 = "USB Modem Driver"
You can modify it for your product name, for example:
MTK6218 = "MY_PRODUCT Modem Driver"
The other perplexing thing is that there are 3 Devices that show up under XP device manager. I managed to get one of em installed as device "android phone" with driver "android ADB interface" from Google and can possibly manage to get ALL of em installed the same way since those device ID's are close ( the last '1' becomes 2 and 3 respectively ) in this
Code:
USB\VID_1782&Pid_5d04&Rev_0229&MI_01
After pushing all these device ID's as "android ADB interface" - and attempting to root- the android rooting s/w's will NOT work at the identification step , erring out with "ADP device not found "- conclusively indicating that those drivers probably did not work well and I ought to look around for better ones - something I am trying to address by this thread.
Lastly - sp_tool when you start it - it will ask for scatter file. The scatter file out there is for MTK6577 (vs my model 6517 ) . If I choose that file - it gives me a warning - yes it out - and click download - it will then just freeze doing nothing
after some more G-mining ( Google) - i found out that I have to stick my VID in that hardware ID's and create an adb_usb.ini file to get the device recognized. Will update on happened next
sieger007 said:
after some more G-mining ( Google) - i found out that I have to stick my VID in that hardware ID's and create an adb_usb.ini file to get the device recognized. Will update on happened next
Click to expand...
Click to collapse
good luck!
That's why I stay away from these little brands. It's very difficult to find good information for it.
found something !!! I hope this is perm and not "leased"
TeTTiweTTi said:
good luck!
That's why I stay away from these little brands. It's very difficult to find good information for it.
Click to expand...
Click to collapse
TeTTiweTTi said:
good luck!
That's why I stay away from these little brands. It's very difficult to find good information for it.
Click to expand...
Click to collapse
ADB driver issue
> adb_usb.ini needed oXXXX as device ID . Where XXXX is the ID that shows up on Device manager. This is detailed here
http://blog.fh-kaernten.at/wehr/?p=1182
after that there will be 2 yellow marks for the rest of the unknowns in device manager. for this you have to modify the .inf file to include the entire h/w ID strings. I guess that makes just about any driver get along with anyone unknown - so here I am not sure if showing them as the such h/w by changing the driver files - gives them the actual intended functionality or all it does it just makes the device manager look clean without yellow marks. Maybe someone could help expand the talk here
[
Code:
android_winusb.inf
%SingleAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C01
%CompositeAdbInterface% = USB_Install, USB\VID_1782&PID_5D04&MI_01
/*ADDED*/
%CompositeAdbInterface% = USB_Install, USB\VID_1782&PID_5D04&MI_02
%CompositeAdbInterface% = USB_Install, USB\VID_1782&PID_5D04&MI_03
So with that - I get 1 ADB interface and 3 devices show up under "com and LPT" - alright that completes the drivers
ROOTING
I found this Chinese rooting program Vroot . I still have'nt figured out what exactly it means but it looks like it DID root that sucker after all. I tested with one app - root checker - got an dialogue in Chinese , asking me whether to give or not and I think I said Y but that app still does not say I have root. Its probably the apps thats at fault because I can get Linked2SD do ALL the stuff it would be doing running as root - .e.g force move programs to SD to free up space etc.
If someone out there can make English out of that and tell me if its mine to keep or leased out ( trial ) - that'd be damn nice !!!
ROMS
- WIP- when I get some more time
the chinese rooting program - now hiring English interpreters
the chinese rooting program - now hiring English interpreters
sieger007 said:
ADB driver issue
> adb_usb.ini needed oXXXX as device ID . Where XXXX is the ID that shows up on Device manager. This is detailed here
http://blog.fh-kaernten.at/wehr/?p=1182
after that there will be 2 yellow marks for the rest of the unknowns in device manager. for this you have to modify the .inf file to include the entire h/w ID strings. I guess that makes just about any driver get along with anyone unknown - so here I am not sure if showing them as the such h/w by changing the driver files - gives them the actual intended functionality or all it does it just makes the device manager look clean without yellow marks. Maybe someone could help expand the talk here
[
Code:
android_winusb.inf
%SingleAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C01
%CompositeAdbInterface% = USB_Install, USB\VID_1782&PID_5D04&MI_01
/*ADDED*/
%CompositeAdbInterface% = USB_Install, USB\VID_1782&PID_5D04&MI_02
%CompositeAdbInterface% = USB_Install, USB\VID_1782&PID_5D04&MI_03
So with that - I get 1 ADB interface and 3 devices show up under "com and LPT" - alright that completes the drivers
ROOTING
I found this Chinese rooting program Vroot . I still have'nt figured out what exactly it means but it looks like it DID root that sucker after all. I tested with one app - root checker - got an dialogue in Chinese , asking me whether to give or not and I think I said Y but that app still does not say I have root. Its probably the apps thats at fault because I can get Linked2SD do ALL the stuff it would be doing running as root - .e.g force move programs to SD to free up space etc.
If someone out there can make English out of that and tell me if its mine to keep or leased out ( trial ) - that'd be damn nice !!!
ROMS
- WIP- when I get some more time
Click to expand...
Click to collapse
sieger007 said:
the chinese rooting program - now hiring English interpreters
Click to expand...
Click to collapse
Post some screenshots of the text you want translated and I will ask the help of one of my Chinese colleagues.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
some screenshots of the text you want translated
here goes ..thank you . Combined several screens together in '4 lets '
TeTTiweTTi said:
Post some screenshots of the text you want translated and I will ask the help of one of my Chinese colleagues.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Click to expand...
Click to collapse
sieger007 said:
here goes ..thank you . Combined several screens together in '4 lets '
Click to expand...
Click to collapse
ROM Basic Information Huawei T8950 Emotion UI 1.6 official pure version of the card brush pack
Author: Hay.
Size: 398MB
Android Version: 4.1.2
UI type: official factory style
Suitable models: Huawei T8950
Release date: 2013-07-31
MD5 code: F7A21630317EE4239DC145E75FF8A276
ROM presentation
1, based on the official code base package and Qualcomm made ​​to upgrade to 4.1.2
2, emui upgrade to 1.6
3, repair legendary SMS unlit issue
4, full root privileges
5, caused during an upgrade wifi loss problem to fix
6, clean up some pit length useless underlying file
7, adjust the signal and the network connection speed
8 streamlining TTS voice database file
9, usb debugging is enabled by default
10 to adjust the overall Desktop Note: Upgrading from 4.0 to 4.1 need to upgrade Bottom bag bottom package
download address: http://pan.baidu.com/share/link?shareid=805743044&uk=137718883
recover before upgrade to upgrade the official recovery Brush back REC official and third-party tools
brush download address: HTTP :/ / pan.baidu.com / share / link? shareid = 807162397 & uk = 137718883
1.6 EMUI ROM Download: http://t.cn/zQWgp1r
3G not accessible
Hi again,
so I've been struggling with another issue.
Somehow my T8950 isn't capable of connecting to the 3G network of my carrier. When I search for networks, only the 2G networks are being found.
Does anybody have a clue why that is and how to solve that problem? My carrier is from Austria and is called "tele.ring" which is operated by T-Mobile.
I'd really appreciate your help, since 2G is reaaally slow for data connections
EDIT: I just tried allowing my phone only to connect to 3G networks by using the Network app from Philipp Mangelow (which shows the same menu as if you dial *#*#4636#*#* as i just found out). This results into no 3G networks being found at all.. I thought maybe the problem occurs because I'm always connected in roaming mode. As I bought the phone in China, it seems to believe that i need to be in roaming mode to connect to my local carrier. However, I have a local SIM-card, so this is somewhat weird..
EDIT 2: So after some googling I've found out that China has the TD-SCDMA radio interface for 3G (at least China Mobile, and that's from where I've bought the phone), but in europe it's W-CDMA.. Remains the question how to change that (if possible at all)..
EDIT 3: So I've wrote an email to Huawei about the issue, and that's the reply:
Sorry that T8950 doesn’t support the W-CDMA mode.
Below please kindly check the frequence band of T8950 for your reference.
• GSM/EDGE:900/1800/1900MHz
• TD-SCDMA:A frequency(2010-2025MHz)/F frequency(1880-1920MHz)
So that means that there is nothing i can do about it?
Thanks and all the best,
amannn
amannn said:
Hi again,
so I've been struggling with another issue.
Somehow my T8950 isn't capable of connecting to the 3G network of my carrier. When I search for networks, only the 2G networks are being found.
Does anybody have a clue why that is and how to solve that problem? My carrier is from Austria and is called "tele.ring" which is operated by T-Mobile.
I'd really appreciate your help, since 2G is reaaally slow for data connections
EDIT: I just tried allowing my phone only to connect to 3G networks by using the Network app from Philipp Mangelow (which shows the same menu as if you dial *#*#4636#*#* as i just found out). This results into no 3G networks being found at all.. I thought maybe the problem occurs because I'm always connected in roaming mode. As I bought the phone in China, it seems to believe that i need to be in roaming mode to connect to my local carrier. However, I have a local SIM-card, so this is somewhat weird..
EDIT 2: So after some googling I've found out that China has the TD-SCDMA radio interface for 3G (at least China Mobile, and that's from where I've bought the phone), but in europe it's W-CDMA.. Remains the question how to change that (if possible at all)..
EDIT 3: So I've wrote an email to Huawei about the issue, and that's the reply:
Sorry that T8950 doesn’t support the W-CDMA mode.
Below please kindly check the frequence band of T8950 for your reference.
• GSM/EDGE:900/1800/1900MHz
• TD-SCDMA:A frequency(2010-2025MHz)/F frequency(1880-1920MHz)
So that means that there is nothing i can do about it?
Thanks and all the best,
amannn
Click to expand...
Click to collapse
No, unfortunatly not. this is not a software setting, but a different hardware chip. my t8950 also does not support 3G in Belgium
TeTTiweTTi said:
No, unfortunatly not. this is not a software setting, but a different hardware chip. my t8950 also does not support 3G in Belgium
Click to expand...
Click to collapse
Mmmmh, ok – that's what i thought too.
Thank you very much anyway for your response TeTTiweTTi!

Help Me Plz For My China Tablet 9.7 inch

Hello Member,
As i know i am very new to this forum.....
But I am a regular reader of this forum.
I need help about my China Tablet which is 9.7 inch dont know of which brand and on tabet there is no name of tablet mentioned on device/Box.
Few month ago the device was running on android 4.0.4... i think it was raw android... 1 month ago i read a article on XDA For cynogen 9 for china/All winner Tablet... So i downloaded and installed through sd card... but when my tablet restarted it shows a message...
" Encryption Unsuccessful " and it is showing a reset tablet button in bottom when i touched on it nothing happen..... Dont know why the touch is not working, So i attached a keyboard but nothing happen when i clicked on the button....
So after i tried many times to install different-different custom Rom by sd card. But each and every time it says.. " E: Signature Varification Failed"
Here Are The specification Of tablet..
OS- Android 4.0 Was installed But Currently It is Having Cynogen 9 (Not Working)
CPU- ARM Cortex-A8 1GHz
RAM- 1GB
ROM- 16GB
LCD- 9.7 INCH
TOUCH PANNEL- CAPACTIVE
2D/3D- AMD Granphic Accleration, Full Support
GRAPHIC- OpenGL ES2.0(AMD Z340) and Open VG1.1(AMD Z160)@27M Tri/sec
WIFI Wireless- Support 802.11b/g/n standarD, highest transmission get to 300Mbps, support local WAPI wireless protocol standard..
I Am Having Some ROM,CWM.. Pics Are Attached....
1- Start Screen-1
2- Start Screen-2
3- Start Screen-3
4- Error Message
5- Error While Installing Rom From Sd Card
6- All Android Developer Software
7- Custom Rom List
8- Cmw
Plz Help Me To Reacces My Tablet...
I will Be Very Thank Full To All Of You.......
THNX
Aditional Information.......
Bro.... one thing more when i want to tell when i connect the device to pc.... it identify and install the drivers via internet... but not read the internal storage..... But in new it was working fine.....
Thank YoU
Thread closed as a duplicate...please use this thread for any future discussions.

X96 Max Plus

Hello,
I have a X96 Max Plus tv box buyed on december last year.
I want to use a USB game controller VID 0x0079 PID 0x0006 DragonRise Inc. generic USB Joystick.
The device is seen by the app called USB host viewer but don't generate events when key is pressed.
Also the analog button don't work.
How can I make android seen the device?
Maybe I need correct keydev.ko file? Where to find it? and how to install?
Thank in advance
mauro.
Mauro_IT said:
Hello,
I have a X96 Max Plus tv box buyed on december last year.
I want to use a USB game controller VID 0x0079 PID 0x0006 DragonRise Inc. generic USB Joystick.
The device is seen by the app called USB host viewer but don't generate events when key is pressed.
Also the analog button don't work.
How can I make android seen the device?
Maybe I need correct keydev.ko file? Where to find it? and how to install?
Thank in advance
mauro.
Click to expand...
Click to collapse
hi, what android version are you running?
you will need hid-dr.ko, i have this file for android 7 and older (amlogic kernel 3.xx) if your running 8/9 then you will have kernel 4.xx and this ko file may not work
aidanmacgregor said:
hi, what android version are you running?
you will need hid-dr.ko, i have this file for android 7 and older (amlogic kernel 3.xx) if your running 8/9 then you will have kernel 4.xx and this ko file may not work
Click to expand...
Click to collapse
Thanks for answer, I have Android 9, where to find the right file?
I have hid-dr.ko file from a working copy of coreelec that support my usb joypad, may I use this file? And How?
Hello, anyone can help? I can't find the right hid-dr.ko. Maybe someone that make custum rom have this file. I need for amlogic s903X3 android 9.
Thanks.
Mauro_IT said:
Hello, anyone can help? I can't find the right hid-dr.ko. Maybe someone that make custum rom have this file. I need for amlogic s903X3 android 9.
Thanks.
Click to expand...
Click to collapse
You can take the file from any amlogic android 8+, as 8+ uses the new 4.x kernel I have a fair few roms and i cant find that file in any of the 9.0 roms, it may have never been compiled for the newer kernel but it give alot of options for you to look
edit:
I found the file, check it on https://github.com/ewwink/Root-Android-S905X3-plus-Dragonrise-generic-USB-Joystick-driver
---------------------
have you found the file?
I would have a problem with an X96max +, namely what happens (it has any android system on it) when the HDR logo appears on the LG TV at boot, the system slows down (freezes) at the boot screen and "System UI isn't responding for a long time "subtitle for wait or close will be followed by another, then it will be very difficult to load the system, but the Wifi will be turned off. It plays on almost every boot, whether you switch from CE to droid or not. Can anyone help?
reset to factory default or flash with another ROM
h
ewwink said:
edit:
I found the file, check it on https://github.com/ewwink/Root-Android-S905X3-plus-Dragonrise-generic-USB-Joystick-driver
---------------------
have you found the file?
Click to expand...
Click to collapse
nice
Lesboy said:
I would have a problem with an X96max +, namely what happens (it has any android system on it) when the HDR logo appears on the LG TV at boot, the system slows down (freezes) at the boot screen and "System UI isn't responding for a long time "subtitle for wait or close will be followed by another, then it will be very difficult to load the system, but the Wifi will be turned off. It plays on almost every boot, whether you switch from CE to droid or not. Can anyone help?
Click to expand...
Click to collapse
cn hdr be turned off on the tv side? may point to if its causing the issue or it its just somthing else that triggers at the same time as the hdr service starts

Categories

Resources