Related
https://www.zagg.com/invisibleshiel...es-screen-protectors-covers-skins-shields.php
I'm wait first review..
Thanx its ordered
thanks, i ordered too!!!
Count me in as well...
Bought one last night
I purchased a few screen protectors off eBay.... and NONE of them actually cover the entire surface of the screen.
This looks pretty amazing!
But I must say that it feels a bit strange to spray the fluid on the back of the protector and then squeeze it out, can't this fluid get into the earphone, speaker and around the buttons below the screen?
this doesn't look bad, but i think i'll stay with my Brando screen protector, which imo is cool enough, and will get a rubber-ish backplate as soon as one with a correct price will appear.
I have been searching for a skin like this for my Diamond2. I have read that this Zagg skins all have a orange coat on top that makes a very undesirable effect. Any one can confirm this?
And what about phantom skynz? They provide full body protection, but the model for the D2 its not available yet ...
A little money saving tip for anyone else buying from zagg - enter ZAGG20 in the coupon code box to receive a 20% discount.
Hope that saves someone some money
root beer said:
A little money saving tip for anyone else buying from zagg - enter ZAGG20 in the coupon code box to receive a 20% discount.
Hope that saves someone some money
Click to expand...
Click to collapse
Just ordered.
Thank you bro!
Just installed the InvisibleSHIELD...
I just installed the invisibleShield I ordered from Zagg a few days ago. Installation was a little tricky, but using the solution made it easy(ish). I used a lot more spray than they recommended, but took the battery/sim/SD card out first. I left it drying for 12 hours, and everything switched on fine.
My advice to anyone getting this is to watch some installation vids on YouTube.
I bought it for the screen protector really as I am very clumsy with other WM phones in the past.
The main issue I have, which is a major one, is that the kit for the Diamond 2 is actually 7 pieces which you install piece by piece. Some of these pieces (like the brushed metal pieces on the edge) are very thin and warp easily. I thought when I purchased this that the screen piece would be one part, where the edges would 'fold' around the sides. This is NOT the case. As a result, the actual edges are not covered at all. These pieces don't meet to form a solid shield, but leave gaps between the edges. I have included some pictured to highlight this.
The actual effect on the screen is ok. The screen is bubble-less, but there is a slight sheen on the front. When the screen is on, its not noticable. Also, the shield is a little 'tacky' - not a lot, but it does help feel more snug in your hand. However, for the same reason, the touch screen (when using a stylus) it doesn't feel as smooth as without.
My overall opinion is that if you are looking for something to stop scratching the screen then its great, but if you are looking for something to make your phone indestructible, look elsewhere.
So you bought the protection that coveres the entire phone?
I'm planning to buy the cover for the display only, was the display cover hard to get in place?
agento
7 pieces....so you have 1 piece for backplate,2 in front and 4 for the sides?
Is that correct?
Thanks for sharing the info. Does the IS make it difficult to get the backplate off?
Does it make the front, back or sides feel or look noticeable different?
Laban said:
So you bought the protection that coveres the entire phone?
I'm planning to buy the cover for the display only, was the display cover hard to get in place?
Click to expand...
Click to collapse
The front was the easiest thing to apply!
MOYSATOS said:
agento
7 pieces....so you have 1 piece for backplate,2 in front and 4 for the sides?
Is that correct?
Click to expand...
Click to collapse
There is the front piece, the back piece, 2 thin strips for the sides and 2 small rectangles for the bottom side near the stylus. So 6, not 7. I can't count!
Jiffycom said:
Thanks for sharing the info. Does the IS make it difficult to get the backplate off?
Click to expand...
Click to collapse
No, the IS covers the back plate, but it doesn't wrap over the sides. The back slides off just as easy as ever.
toady2k1 said:
Does it make the front, back or sides feel or look noticeable different?
Click to expand...
Click to collapse
The front just looks like a normal screen protector. The back looks glossier. The touch though, as stated earlier, is slightly tackier. The only thing is the gaps where the IS doesn't meet.
Not trying to bum you out, but... the pictures you posted show a pretty messy device. Doesn't have a "clean" look anymore, is this because of the ZAGG?
Hey guys just here to show you guys what the carbon fiber (black) looks like on the North American Galaxy Note. Feels really nice and ultra thin so you can put it in another case if you would like. Quite frankly it makes the Note look really smexy.
Does the CF offer any additional grip?
looks good. makes me wish i would of opted for the CF, thought about doing the white CF
It doesn't seem to be that grippy, it's a bit more grippy than the original material for sure. The reason I got it was because the back and sides had the potential to be scratched up really easily and I didn't like the glossy feel of the sides.
Also, I would probably get black or gunmetal as the white gets dirty quick I hear.
Remember though, real carbon fiber will impead reception. I have their matt product on mine, but would NOT recommend it at all. Since it's clear and the battery cover is "pitted", it leaves ugly looking almost air bubbles under it ( and yes, I had them put it on for me, that sutff SUCKS putting it on ).
The screen protector of theirs, is better then most, however the SAME PEOPLE make theirs, zagg, and most everyone elses, and it's 3M The diffrence is in the coating. I do like the ghost one the best, as it does not leave the nasty orange peal effect on the screen, and the coating does seem to last approx 6-8 months before it has to be replaced. If you get it done at a mall kiosk, they will re-do it for free if it gets hosed, ( well it's 5$ fee to do it is all ).
Now, if you want a killer bra for your car, ghost armor is your company. It's what they started with. I watched one of their employees do a car recently in it. Took him less then 4 hours, and it was flawless. Takes me that long to get the screen cover on and it looks like crap, i can't even imagine doing something like a hood or what have you.
rkennison said:
Remember though, real carbon fiber will impead reception. I have their matt product on mine, but would NOT recommend it at all. Since it's clear and the battery cover is "pitted", it leaves ugly looking almost air bubbles under it ( and yes, I had them put it on for me, that sutff SUCKS putting it on ).
The screen protector of theirs, is better then most, however the SAME PEOPLE make theirs, zagg, and most everyone elses, and it's 3M The diffrence is in the coating. I do like the ghost one the best, as it does not leave the nasty orange peal effect on the screen, and the coating does seem to last approx 6-8 months before it has to be replaced. If you get it done at a mall kiosk, they will re-do it for free if it gets hosed, ( well it's 5$ fee to do it is all ).
Now, if you want a killer bra for your car, ghost armor is your company. It's what they started with. I watched one of their employees do a car recently in it. Took him less then 4 hours, and it was flawless. Takes me that long to get the screen cover on and it looks like crap, i can't even imagine doing something like a hood or what have you.
Click to expand...
Click to collapse
Trust me.... these are NOT real carbon fiber... lol
it's only vinyl with carbon fiber look
Looks awesome...I just got zagg I should have went with this
Galaxy Note
rkennison said:
Remember though, real carbon fiber will impead reception. I have their matt product on mine, but would NOT recommend it at all. Since it's clear and the battery cover is "pitted", it leaves ugly looking almost air bubbles under it ( and yes, I had them put it on for me, that sutff SUCKS putting it on ).
The screen protector of theirs, is better then most, however the SAME PEOPLE make theirs, zagg, and most everyone elses, and it's 3M The diffrence is in the coating. I do like the ghost one the best, as it does not leave the nasty orange peal effect on the screen, and the coating does seem to last approx 6-8 months before it has to be replaced. If you get it done at a mall kiosk, they will re-do it for free if it gets hosed, ( well it's 5$ fee to do it is all ).
Now, if you want a killer bra for your car, ghost armor is your company. It's what they started with. I watched one of their employees do a car recently in it. Took him less then 4 hours, and it was flawless. Takes me that long to get the screen cover on and it looks like crap, i can't even imagine doing something like a hood or what have you.
Click to expand...
Click to collapse
hmm... co-worker has the iphone case with titanium bumper and carbonfiber back, no signs of reception issues. Also I actually thought install of the GA was easier then most ive put on there.
Ghost Armor is a local company here in AZ.
They say it is definitely Carbon Fiber not vinyl.
Btw, gun metal looks amazing on my blue/black note.
Sent from my M801 using Tapatalk 2
Honeybadger said:
Ghost Armor is a local company here in AZ.
They say it is definitely Carbon Fiber not vinyl.
Btw, gun metal looks amazing on my blue/black note.
Sent from my M801 using Tapatalk 2
Click to expand...
Click to collapse
lol... well, you can go back and demand for your money back then ...
google for "3M DI NOC" and read !!... I got these on my other devices and they are definitely NOT real carbon fiber.
carbonfiberfilm.com
3M™ DI-NOC™ is a high-end vinyl from 3M™ from their Architectural Finishes series. The vinyl can be installed on all sorts of surfaces, regardless of the curvature. This means there are an unlimited amount of applications, from the interior of your car to the back of your laptop.
The CA-421 (black) model that we sell gives a dry carbon look, though it's available in 8 different colors. Contrary to initial belief, carbon fiber DI-NOC™ is not just a printed carbon fiber pattern, but in fact has a three-dimensional texture to it. This allows it to reflect light the same way that real carbon fiber would, making it the best real-world alternative to carbon fiber when you just want the look without paying a ton of money.
Click to expand...
Click to collapse
looks great
id stay away from white, ive had it on before and it attracted so much dirt.. there wasnt one day where it was clean.
Man that looks awesome!
We only have 1 small mall stand for Ghost Armor. They only had the clear when i went. Would have loved this CF.
I have tried several of these "skins" over the years ad have not found one that did not eventually start peeling up on the edges. They all look great when new, but they didn't hold up .
Not saying yours is the same. Just my experience with what I had used.
Metsuna said:
Hey guys just here to show you guys what the carbon fiber (black) looks like on the North American Galaxy Note. Feels really nice and ultra thin so you can put it in another case if you would like. Quite frankly it makes the Note look really smexy.
Click to expand...
Click to collapse
I got the gunmetal version, and after barely a day I'm worried about how it will hold up. I am no Freddy Kruger and accidentally scratched my nail across it, and now it has a scratch. From just my fingernail. To the OP, how is yours holding up over time?
over2land said:
I got the gunmetal version, and after barely a day I'm worried about how it will hold up. I am no Freddy Kruger and accidentally scratched my nail across it, and now it has a scratch. From just my fingernail. To the OP, how is yours holding up over time?
Click to expand...
Click to collapse
So far so good and I've had it in pockets, and cases. A couple of tiny scratches but it's hardly noticeable as mine is black. No peeling to speak of yet. Though I assume the only peeling will be from the sides, which I don't mind to take off if it does peel but it's on like glue still.
I actually work for ghost armor, and I also have a note , they do sell other colors other then black,gray and white. I myself have almost a lime green on my Note and it looks quite good!
Invisible defender. It's a Korean product based on the language the instructions are written in. It has wings that wrap and the edge to the back of the phone.
Someone on XDA did this with a Galaxy tablet screen protector on the Note 7. Same idea here with the sides.
Screen is smooth and no edge lifting, no air gaps, not $45 like the white Stone.
Video here https://youtu.be/5Oqm9CMETvw
Hmm interesting concept, might have to try this out eventually. I have a feeling thought that once you put a case on those bubbles on the edges might come back as seen in that video.
The corners, of course, don't wrap around, and therefore are susceptible to lifting.
Can confirm it's been a few hours. No bubbles. If you swap cases frequently it might be an issue. Essentially the edges are tucked in the back of the phone and then held in place by the case sides and back.
Not anti-shock protector after all :/
Have this being delivered today from Amazon. Looks promising
seoulbrova said:
Invisible defender. It's a Korean product based on the language the instructions are written in. It has wings that wrap and the edge to the back of the phone.
Someone on XDA did this with a Galaxy tablet screen protector on the Note 7. Same idea here with the sides.
Screen is smooth and no edge lifting, no air gaps, not $45 like the white Stone.
Video here
Click to expand...
Click to collapse
Looks cool. Two quick questions for you though. How does it feel... like smooth? Also I have a skin on the back that covers all the back part. Would this protector work work that? Like how far do the wings go back? Thanks.
I just installed this on my s8+. Best screen protector I have used on the phone so far. The wrap around not only keeps it from coming up on the edges, but also helps to apply by acting like handles. It sits shy of the corners to lessen the chance of the corners being lifted by a case. The feel is smooth, but it does have a slight orange peel finish. Went on perfectly and seems to hold very well. Does show fingerprints much more than a naked screen.
Looks promising, I just grabbed one from Amazon. Thanks for sharing.
acheney1990 said:
Looks cool. Two quick questions for you though. How does it feel... like smooth? Also I have a skin on the back that covers all the back part. Would this protector work work that? Like how far do the wings go back? Thanks.
Click to expand...
Click to collapse
Wings just go very slight. If you have a skin on the back I would tuck the wings under the skin. It might even help hold things in place even better. Screen is super smooth.
Got these off Amazon. I've had this screen protector on my phone for 2 days now, in my opinion I'm not really liking it. It's smooth as glass which I like, but the clarity is not clear as I would like it to be. I don't like that smudgy/ matte look. More noticeable on whites, like scrolling through YouTube or web browser. I came from the Spigen wet install film. It had more clarity but out of my 5 cases, I was only able to use one case because the other cases made the edges of the film peel. Installation was straight forward, no lint or bubbles. I'll stick with it for now till I find something better.
Kambuja said:
Got these off Amazon. I've had this screen protector on my phone for 2 days now, in my opinion I'm not really liking it. It's smooth as glass which I like, but the clarity is not clear as I would like it to be. I don't like that smudgy/ matte look. More noticeable on whites, like scrolling through YouTube or web browser. I came from the Spigen wet install film. It had more clarity but out of my 5 cases, I was only able to use one case because the other cases made the edges of the film peel. Installation was straight forward, no lint or bubbles. I'll stick with it for now till I find something better.
Click to expand...
Click to collapse
That's interesting. I've used matte protectors and don't think those one is matte. It isn't clear as glass but I think it has pretty good clarity.
Guys is it this one Samsung Galaxy S8 Plus Screen Protector, Invisible Defender [Full Coverage][2-Pack] Edge to Edge Curved Side Coverage Guaranteed [Case Compatible] Super Thin HD Clearness Film for Samsung Galaxy S8+ https://www.amazon.co.uk/dp/B06ZXQZH9W/ref=cm_sw_r_apa_QZOezbH4QRB03
How come only 1 review?
I would not recommend this protector. I installed it and it looked great, no air bubbles at all. However, as soon as I put my Supcase on the phone all four corners started to peel away from the screen. A day later the top of the screen protector near the sensors and camera also peeled away to a point where they are actually laying on top of the case's lip. I bought it because it said "case friendly" but after my experience with the Supcase I can definitely say this is not the case... Having the corners wrap around as well and maybe decreasing the height would make it work a bit better in my opinion.
PieceofSlice said:
I would not recommend this protector. I installed it and it looked great, no air bubbles at all. However, as soon as I put my Supcase on the phone all four corners started to peel away from the screen. A day later the top of the screen protector near the sensors and camera also peeled away to a point where they are actually laying on top of the case's lip. I bought it because it said "case friendly" but after my experience with the Supcase I can definitely say this is not the case... Having the corners wrap around as well and maybe decreasing the height would make it work a bit better in my opinion.
Click to expand...
Click to collapse
Are you sure you are using these screen protectors? Mine is shy of reaching the corners, and I actually have the supcase and it is fine. I have had no issues with lifting at all. The screen protector does not reach the corners so it never interferes with the case i use. Perhaps you installed it a bit too high or low on the screen.
---------- Post added at 08:23 AM ---------- Previous post was at 08:21 AM ----------
marvi0 said:
Guys is it this one Samsung Galaxy S8 Plus Screen Protector, Invisible Defender [Full Coverage][2-Pack] Edge to Edge Curved Side Coverage Guaranteed [Case Compatible] Super Thin HD Clearness Film for Samsung Galaxy S8+ https://www.amazon.co.uk/dp/B06ZXQZH9W/ref=cm_sw_r_apa_QZOezbH4QRB03
How come only 1 review?
Click to expand...
Click to collapse
That is the one I have, but from the US amazon store. They are new so I am guessing that is why there is only one review. The US store has more reviews.
Just ordered off Ringke's official eBay store. Won't be here until next week but I'll update with how it turns out. Thanks
I know one user has said they dont like the screen protector due to clarity lacking.
However can anyone else comment on the clarity of this screen protector?
I want to purchase this but dont want any degradation of image quality from my screen.
Any input is appreciated, thank you.
Just received and applied mine.
I prefer glass, always have. I've read review after review of the current generation of glass and haven't felt like any would please me. I'm a bit picky, so much so I often order more than 1 of any protector in case I miss a speck of dust or something goes wrong.
This wrap around one is actually pretty nice. Installation is pretty much all about alignment and cleanliness. I guess I've installed enough that I got both the first attempt. It went on easy enough, plenty of bubbles that I was able to work out easily enough. Wrapping the edges went smoothly and the finished result is fairly impressive.
The feel is glass like. It's not glass but it's not rubbery nor is there any apparent orange peel effect. It's smooth and responsive and I don't notice any issues with clarity. Honestly looking at the device I can't tell there's a protector on it until I look at the edges. The edges (top and bottom) are there, but you have to look for them. Time will tell if they collect dust or peel, however they stick well and the whole thing is thin enough you barely feel where protector ends.
I have the official thin case, it went on without issue. The wrap around is nice in there is no difference between no protect tion and this protector. Together I feel the device is protected from scratches, but not drops. The S8+ (and it's little brother) are notoriously prone to breaking if you believe drop tests, so I really didn't expect this setup to be all protecting.
As for the back where it wraps around, well it's pretty much as I described the top. You'll feel where the edge is but it would only be distracted ting to the most anal retentive types.
Overall I would give it a try. 2 for $11 isn't asking that much.
Forget this crap i test it....now i found liquid glaz and its amazing! i never see a bether screen protector!
https://www.glaz-displayschutz.de/
Kenneth000 said:
Forget this crap i test it....now i found liquid glaz and its amazing! i never see a bether screen protector!
https://www.glaz-displayschutz.de/
Click to expand...
Click to collapse
9+H harder than sapphire.... lol ok there.
Hey guys,
Thought I'd share my experience with this screen protector.
I've tried damn near all available on the market (tempered glass specifically) except the official OnePlus tempered glass. None were up to par. They all only have adhesive along the edges only which imo is a poor desicion. I see no plus to this.
The ones i tried all got dust under in a matter of days, and some even fell off completely after small drop tests.
Although this spigen is not a tgsp, it's is worth every penny. Application was easy, the wet application makes it to where alignment is 99 percent perfect. It covers at least all of the lighted display, of course it doesnt follow the 2.5d curve.
After application it took a couple hours to clear up any haziness that remained after squeegee/drying process. Don't apply too much pressure as I seem to have wrinkled a corner.
All in all, very satisfied with the product and will continue to buy after they get ugly...unless they make a perfect tgsp im the future.
Link: https://www.amazon.com/gp/aw/d/B074...+5+neoflex&dpPl=1&dpID=516YABFlNoL&ref=plSrch
MrWilsonxD said:
Click to expand...
Click to collapse
Edited. My bad.
cesar.mk4 said:
Edited. My bad.
Click to expand...
Click to collapse
. all good! Going to try one of these when I get paid!
MrWilsonxD said:
. all good! Going to try one of these when I get paid!
Click to expand...
Click to collapse
It's pretty much the same as the one comes pre-installed on the device.
Hoe does this protector goes with dust? Not underneath, bit on top? The pre installed protector is a real dust catcher ...everything I get the phone out of my pocket I have to clean the screen from dust
Caspertje19 said:
Hoe does this protector goes with dust? Not underneath, bit on top? The pre installed protector is a real dust catcher ...everything I get the phone out of my pocket I have to clean the screen from dust
Click to expand...
Click to collapse
Its far less of a dust/lint magnet. Id say 80 percent less attraction.
I just bought this protector as well, and installed it today.
It is exactly the same size as the pre-installed protector, which personally I like. That avoids issues with the curved screen, but is still large enough to protect the screen adequately when using a case. Of course the second benefit is that this is a case friendly screen protector. I have a cheap black TPU case similar to the spigen rugged armor, and they fit together without issue.
This is one of those healing/indestructible type protectors that have been around awhile, like an IQ Shield. I have used these on older devices, although I upgraded to TGSP on my last phone. I would have bought a TGSP for this phone, but apparently, the manufacturers have no clue what they're doing. I do like this type of protector. It is a wet application. This protector makes the screen appear slightly textured when viewed from extreme angles, but not much viewed straight on. I need to give it a full day to dry before I get too critical of it. The package came with two, and I'm likely to use these until a decent TGSP rolls around.
jjesusfreak01 said:
This is one of those healing/indestructible type protectors that have been around awhile, like an IQ Shield.
Click to expand...
Click to collapse
Yup, forgot to mention that. Still don't have any cosmetic problems with the film. Even the wrinkle I mentioned in the first post has corrected. I can actually see the film "heal" when I scratch it with my nail intentionally.
1 day followup: All the bubbles have disappeared. There is still very mild visible distortion that is present with every protector of this type. It doesn't bother me, but screen clarity perfectionists will probably complain. Again, its not a TGSP, but its great for what it is. No other issues.
Really waiting for it to get released in Europe.. So far only America, India as far as I can see. :/
Akubus said:
Really waiting for it to get released in Europe.. So far only America, India as far as I can see. :/
Click to expand...
Click to collapse
You could go for the ultimate shield, which is basically the same type of screen protector.
Unlike the spigen it covers the whole front, I mean the area below the fingerprint scanner especially.
I don't know if there is any difference in thickness or coating.
The ultimate shield also has the same "orange skin effect" that was mentioned earlier in this thread, but u will barely see it when using your phone.
How's the scratch resistance on this one? I'm on my last Orzly TGSP, which lets in dust from ever side, I'm looking for alternatives that at least don't scratch.
Gaurav.Stallion said:
How's the scratch resistance on this one? I'm on my last Orzly TGSP, which lets in dust from ever side, I'm looking for alternatives that at least don't scratch.
Click to expand...
Click to collapse
After a quick clean an inspection i noticed one single micro scratch. This is since day before original post.
Just installed this today. Haze from the liquid went away within hours and so far so good!
There is an "orange peel effect" and it doesn't feel like glass but those are a given, and expected, so no points off for these two things.
It's much better than any tgsp that I've tried, simply due to the fact that it's edge to edge. I couldn't stand
1. The lack of adhesive on the sides
2. The sides being significantly cut off
The "wet install" allows for you to have a perfect install as well, as you can slide it around and adjust it perfectly, before finally setting it in place.
I'll see how it holds up over time and will update this post if anything unusual happens with it!
I will also try and get some pics soon (if I remember lol)
For those of you with this screen protector, how did you end up aligning it correctly? There's a small amount of space around each cutout and I found with my initial installation that while those were lined up, with the Rugged Armor case installed I had a small gap on the right side.
Amazon's instructions say to install with the case already on but Spigen's does not so thought I'd ask how others got theirs to line up correctly.
I installed one of these tonight. I did it with the Spigen case installed, and centered the protector on that. Waiting for it to cure and lose the bubbles. It didn't look that bad to start and 3 hours later it is looking better.
At this point I would pay a premium for flat glass! I just don't enjoy these phones like I used to without a nice perfect TGSP!
Click like if you agree!
bobbyricha said:
I installed one of these tonight. I did it with the Spigen case installed, and centered the protector on that. Waiting for it to cure and lose the bubbles. It didn't look that bad to start and 3 hours later it is looking better.
At this point I would pay a premium for flat glass! I just don't enjoy these phones like I used to without a nice perfect TGSP!
Click like if you agree!
Click to expand...
Click to collapse
How'd you end up getting rid of the excess water? Did you remove the case after putting on the screen protector?
CephiroX said:
How'd you end up getting rid of the excess water? Did you remove the case after putting on the screen protector?
Click to expand...
Click to collapse
I removed the case and wiped it down with the cloth. I left it out of the case to dry / cure.
CephiroX said:
For those of you with this screen protector, how did you end up aligning it correctly? There's a small amount of space around each cutout and I found with my initial installation that while those were lined up, with the Rugged Armor case installed I had a small gap on the right side.
Amazon's instructions say to install with the case already on but Spigen's does not so thought I'd ask how others got theirs to line up correctly.
Click to expand...
Click to collapse
On the Spigen install video at install.spiegen.com for the case friendly S8, they show putting it on with the case on. That's what I did. Spigen calls it full coverage but compatible with Spigen case.
After installing it then removing the case for drying and curing, the bubbles disappeared after about 18 hours, but I have one piece of trash trapped. After putting the case back on, it seems compatible but the film goes out to the border of the Spigen case without touching it, except it barely touches on the bottom. It is a very close fit, I believe putting it on without the case would cause problems with alignment.
Overall not bad, it is easier to align the film with the case on. The touch feel is OK for me.
I know DBrand are big state side but with the phone not being available for our American counterparts it'd doubtful they'll do a skin for the P20 Pro so I've order a brushed slate skin via xtreamskins. Cost me £6.50 which I didn't think was too bad. I can post picture and give an overview of how easy/difficult it is to fit and photo's of how it looks if there's much interest from folks on here? https://www.xtremeskins.co.uk/products/huawei-p20-pro-skins?variant=8065942650908
Deano1889 said:
I know DBrand are big state side but with the phone not being available for our American counterparts it'd doubtful they'll do a skin for the P20 Pro so I've order a brushed slate skin via xtreamskins. Cost me £6.50 which I didn't think was too bad. I can post picture and give an overview of how easy/difficult it is to fit and photo's of how it looks if there's much interest from folks on here? https://www.xtremeskins.co.uk/products/huawei-p20-pro-skins?variant=8065942650908
Click to expand...
Click to collapse
I was just looking at this today. Instead I ordered a few cases off eBay. They look like they better protect the cameras. https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/112914026578
I'd appreciate that
Got my skin from these guys today. It's not that great of a product but works for the price. Application is pretty straight forward but a pain getting it to align with the cameras and flash. The good part is that you can peal and reapply and it doesn't affect the stickiness of the skin. The edges don't stick down at the rounded corners so you definitely need a case over this or it will peal off
Ereckson said:
Got my skin from these guys today. It's not that great of a product but works for the price. Application is pretty straight forward but a pain getting it to align with the cameras and flash. The good part is that you can peal and reapply and it doesn't affect the stickiness of the skin. The edges don't stick down at the rounded corners so you definitely need a case over this or it will peal off
Click to expand...
Click to collapse
Looks kinda cool with the case, but then again I got the blue colour so don't think I want to cover that up anyway.
DaveP2611 said:
Looks kinda cool with the case, but then again I got the blue colour so don't think I want to cover that up anyway.
Click to expand...
Click to collapse
The only issue I have with this is the edges not sticking down. Let me know your thoughts on the blue skin.
Heat it on with a hairdryer dude
Ereckson said:
The only issue I have with this is the edges not sticking down. Let me know your thoughts on the blue skin.
Click to expand...
Click to collapse
Ah sorry I meant I picked up the Midnight Blue P20 so wouldn't put a skin over it anyway.
Damn, was hoping to get a skin so i can use it without a case and keep the back scratch free
The edges not sticking down is unfortunately a deal breaker there
Check out https://www.xtremeskins.co.uk
I'm currently running their carbon Fibre skin on my S8+ and it sticks great. Even around the edges. No issues whatsoever and good scratch protection. Can only recommend them. Just ordered a black camo one for my P20 pro.
Heat it
Neo_Sk8eR said:
Damn, was hoping to get a skin so i can use it without a case and keep the back scratch free
The edges not sticking down is unfortunately a deal breaker there
Click to expand...
Click to collapse
You need to heat skins on if the edges are curved.....get your mums hairdryer on it
I had same ssue with mine. Emailed Xtream Skins who offered to send out a replacement (I've gone for camo this time as slate doesn't look as good as on photo render).
They sad that they've changed the design and after looking back at their website you can see that the the skins now wrap around the sides of the phone.
Regards the sides not sticking. I put the case on over the skin and over night the skin stuck completely due to pressure from case. Beats the hairdryer technique that didn't work for me.
Thewarroom said:
You need to heat skins on if the edges are curved.....get your mums hairdryer on it
Click to expand...
Click to collapse
I'm a grown ass man.....
I'll get the Mrs hairdryer
Got a skin from them, fits and sticks perfectly. Definitely reccomended. Black camo looks great...
Neo_Sk8eR said:
I'm a grown ass man.....
I'll get the Mrs hairdryer
Click to expand...
Click to collapse
Any photo that I can take a look and decide to buy one? I interested in the black camo
I have got this one from 7layerskinz.com. Fits very nice.
Got my black camo skin from Xtreme in the UK. Came within 2 days. The video instructions are really straight forward, I got the back glass one only.
Would take a pic, don't have a spare phone at the minute to do so! Was cheap too. £6.99
Fitting was easy, the key is to activate the glue by using some gentle heat and pressure. No lifts on any corners or sides. No bubbles as it's got air release channels in the back, but you gotta push the air out before you seal the sides! Made that mistake on my iPhone seven last year.
It's definitely less slippy now with a skin on.
Are there any clear skins available state side? I got the Twilight color so would prefer not to hide it but still need some protection.
ajamils said:
Are there any clear skins available state side? I got the Twilight color so would prefer not to hide it but still need some protection.
Click to expand...
Click to collapse
Check out the SlickWraps man, they offer naked wrap with gloss and matte options, I am planning on getting the twilight color next month as well!! Quick question for yall, anyone has screen latency issue on this device? seems to be a common issue.
ajamils said:
Are there any clear skins available state side? I got the Twilight color so would prefer not to hide it but still need some protection.
Click to expand...
Click to collapse
Do remember that the application for clear skins will be problematic if it is not a wet install. With skin installation, generally you would have to handle the adhesive with your fingers and that means imparting fingerprints on it. With non-clear skins that isn't an issue as you will not be able to see the smudges. With clear skins you will and the only way to prevent this is to perform a wet install.