Hello all.
I've got problem with my i5510.
First.That I5510 has bootloop (restart and restart). I could put it on download mode. but not recovery mode.
So I flashed it with ODIN with new UK room (there is no rom for indonesia)
It passed but still restart
Then I flashed it by other ROM.
Finally, my I5510 is really DEAD now... T_T
Can't connect to PC,Can't download mode nor recovery mode.
I've try to Connect it by holding power + Q without battery wait for 10s than insert battery but it is still Can't connect to PC
Any idea?without JTAG?maybe by OMAP flash?
Thanks in advance...
Thanks for your help..
Sorry if I post this thread on a wrong room. this is my first Thread
Sorry for my bad english
i've jtag it and than now i got download mode.
but it is still restart when i flash it with latest rom and deadboot if i flash it with froyo rom. any idea?
can donload mode,can't recovery mode,but still restart flash with odin
Done.
>Full erase it by Jtag
>flsh with file dump althought i only get error : "bad address"
>Flash bootfile
>flash Foroyo via odin
now my i5510 back to life again but still get error
>Flash again with gingerbread
> Full Factory
I've got it normal again although I lost my IMEI,but still can dial,browsing,wifi,bluetooth..
If there is any guys who can teach me how to repair IMEI without BOX or dongle without backup EFS... Please help me...
Thanks
Related
Hi guys, really need your help!!!
Been using Custom ROMs since Omnia HD. Loved the work of cookers, never had problems, ODIN is just so easy.
Four days ago, tried to flash I9100 from Lite'ning v5 to 6.1. So, as recommended I wiped cach with CWM, and then done proper FORMAT.
Once I pressed it, format started but didn't finish - the phone restarted, and continued to restart - stuck with boot "S" animation - so can't boot into system.
Then, tried as suggested to install VANILA latest firmware - tried it - didn't work. Keeps freezing in the middle of the process in ODIN - or - it says FAILED. Now, i can't use CWM - if I press Volume UP +HOME+POWER, i get "Mobile phone with yellow Triangle with PC signs" - left to the right.
Updating to the VANILA software doesn't work, so as Lite'ning V6, or any other versions of it. Without CWM, i can't boot from SD Card to other cooked roms, so please, any ideas will be MUCH APPRECIATED !!!
morespama2k .at. yahoo
I have never tried this before myself, but I have seen some people recommend trying an emergency firmware recovery with kies. If someone else can chime in and correct me if I am wrong, please do so.
emergency firmware recovery with kies - will try now, and update status...
Solution doesn't work
SugarySnack said:
I have never tried this before myself, but I have seen some people recommend trying an emergency firmware recovery with kies. If someone else can chime in and correct me if I am wrong, please do so.
Click to expand...
Click to collapse
This solution doesn't work. Because, all that I can do is to log into DOWNLOAD MODE, once I connect the phone via USB to PC with Kies ON, then the Kies doesn't recognise the phone in this mode, so there is opportunity or possibility to do an emergency firmware recovery - if anybody knows anything abt this - please comment ....
morespama5k said:
This solution doesn't work. Because, all that I can do is to log into DOWNLOAD MODE, once I connect the phone via USB to PC with Kies ON, then the Kies doesn't recognise the phone in this mode, so there is opportunity or possibility to do an emergency firmware recovery - if anybody knows anything abt this - please comment ....
Click to expand...
Click to collapse
Put the phone in recovery mode with Volume UP +HOME+POWER (it won't be CWM because you tried to flash stock, it is samsung's recovery mode), "Mobile phone with yellow Triangle with PC signs" and try it.
Let me know how it goes.
just checking... when you flashed through odin, was kies turned off? Meaning not even in the background and it's (process) not present in task manager?
Because that's what happend to me when i tried to flash a kernel to my SGS2. odin failed too but good thing my phone wasn't bricked.
Anyways, I would recheck the custom rom you downloaded, it sounds like the file was incomplete, or damaged during download. Always check the MD5 checksum, or at least the filesize.
Some custom ROMs cannot rebuild a formatted userdata partition. Most custom kernels cannot do that, so doing a factory reset (wipe userdata partition, format data partition, etc) is not recommended.
FIX:
Boot into Clockwork Recovery
Format cache, format system, format boot, format userdata partitions
Boot into Download Mode
Use ODIN to flash to Stock ROM
Boot into Stock ROM
Flash Custom ROM (Lite'ning), DO NOT FORMAT USERDATA and DO NOT FACTORY RESET!!
Boot into Lite'ning
CM7 using codeworkx kernel (CM7 kernel), is the only custom rom that does not have a rebuild userdata partition problem.
for my i9100 i solved this problem
i have the same issue and i solved with my i9100:
unmount battery and leave it for 20 sec
push up vol and home and keep it then put the battery !!!!! put vol up and home still pushed
if ....if you entry in recovery mode wipe data and cache and .... voila...
sorry for my bad english...hope this will work for you guys !!!
Jig from ebaaaaay .
Sent from my GT-I9100 using xda premium
I Have a I9100 ,It Has android cod ,I tried by hard reset ,hard reset complate but cod stil present.then i flash it by odin3 ,flash complate then start up and friz.then i open its Batery and put it again then try to flash again .but its sleeping now. dont going to download mod.not powering on .have any solution guys ?????????
hi i tried to flash a kernel on my friends phone and now its bricked i can get into download mode. before u say its not bricked, i can get into download mode but it no longer registers on my computer. i have all the drivers downloaded, i downloaded kies also. when i try to boot normally i get a message saying firmware encountered an issue. i have tried moving computers and new cables. so how might i get this phone back in working order plz and thank u
slayerofpeace1 said:
hi i tried to flash a kernel on my friends phone and now its bricked i can get into download mode. before u say its not bricked, i can get into download mode but it no longer registers on my computer. i have all the drivers downloaded, i downloaded kies also. when i try to boot normally i get a message saying firmware encountered an issue. i have tried moving computers and new cables. so how might i get this phone back in working order plz and thank u
Click to expand...
Click to collapse
Does it boot into recovery mode?
Press Volume UP + Home + Power keys until recovery menu appears.
If yes, then try to wipe cache (and Dalvik cache), fix permissions and reboot.
If that does not help, you may have to wipe data (do a factory reset).
If recovery mode does not work, then your phone seems to be semi-/soft- bricked.
You will have to get the phone connected to your PC in download mode to repair it.
Here is the correspsonding thread about hw to fix a soft-bricked phone => http://forum.xda-developers.com/showthread.php?t=1457458
Good luck !
i have gotten it into download mode but my computer does not see the device
Install samsung kies?
have that installed, reinstalled, and i installed all the drivers. it was working but after the odin flash failed i couldnt get it to connect. right now im building a jib for the phone.
so built jig, now im sad..... it did nothing, now either i have to send it in or some one might know a way to fix it
Hi. I'm new to here so please i appreciate any help you can give .
So the story is... I own a samsung galaxy gio S5660 (i have Android 2.2.1 ) and i wanted to flash a custom rom on it. Well i forgot that i had to root it, so i just flashed the CWM recovery on it and now i cant get into the recovery, the samsung logo just stays. The phone works, it boots up but only not in the recovery mode :s. Also, i cant root from the pc either because i get unknown device, i installed kies, reinstalled the drivers... I get the error : Windows has stopped this device because it has reported problems. (Code 43). It charges via usb but doesnt connect as storage or something like that :/ i cant figure out what to do. The root programs dont recognize/find the device so am i screwed or what :s. I know i was stupid that i didnt think about the root. I've done the rooting on a tablet many times so i dont know why i forgot to do it :s
Thank you for reading. Hope i get an answer
BUMP BUMP-
I did a factory reset with the code from the phone and now its stuck on the samsung logo :s. It enters download mode and fastboot but the most important problem is that the pc doesnt recognize the device so i cant use odin or any similar program to flash a new recovery on it :s. Is there anything i could do?
I tried reinstalling the drivers multiple times.
I tried on 2 laptops and 1 desktop but it's all the same :S.
BUMP.
Help please
BUMP T_T
jaja
Prepare ODIN with the firmware you want to flash (in my case was Gingerbread 2.3.4) and get it ready to go.
-
Remove battery, wait for a bit. Insert battery again.
-
Flash a recovery with your specific filesystem (EXT4 or RFS)-(If you have EXT4, download ext4 only, don't get ext4+rfs)
-
Enter recovery & Wipe | Format:
System
Data
Cache
Dalvik Cache
Have ODIN ready. Connect phone to PC.
-
Reboot to Download Mode
Hold Volume down + Power + Home button at the same time.
-
At this point Odin should have detected your Galaxy Gio (Yellow rectangle should appear).
-
Insert the Stock Rom or Custom Rom.
-
Click Start button in Odin and wait about 5 min.
-
Reboot and wait
Method 2: http://forum.xda-developers.com/showthread.php?t=1153310
Method 3: using usb jig: http://www.youtube.com/watch?v=METM3teG5rI
It's not my fault if you hard brick your phone using this methods.
Thanks for answering, but i cant enter recovery as i mentioned early and also odin doesnt detect my phone in download mode :s. When the samsung logo just stays i plug also the usb in then the pc says it cannot recognize the device and its listed as unknown which i before also mentioned. When i attempt to enter recovery it just also stays at the samsung logo and isnt entering it :s..
Bumpbumppp
Guys i still dont got the answer :c
Dear ALL Geniuses...!
I am running Noir A2 Lite, with Spreadtrum chip SP8810. I am stucked into Bootloop, and I am fully sure it is due to not clearing Dalvik-cache.
I was setting up the low internal memory issue with ext3 partition of Sdcard method using Pimk Rom, BusyBox etc. Everything was fine and in the end I got the internal memory increased but the phone was working slow so I thought to get back to the previous state where my genuine internal phone memory was existing. So I just done the RESET FACTORY from Settings of phone. After that it rebooted and still keeps rebooting again and again. I searched on the causes of BOOTLOOP and came to know it might happen due to not clearing DELVIK-CACHE.
Phone is rooted D Of course), and I can't boot into Recovery Mode, I don't know why because since I rooted I wasn't able to get into recovery mode by pressing any key combinations. But I can go into fastboot by pressing VOL+ and POWER button together.
Now anyone body here? Can you suggest me any way to resolve this problem?
Regards!!
bro,you should download your firmware for your device,then flash your phone,you can boot into download mode and flash it,but you must to download firmware and flash tool,and do not forget to download driver to make your PC know your device,google it for get the firmware and the tutorial for your device hope it helped
thank you for your reply
kelvinvalencio said:
bro,you should download your firmware for your device,then flash your phone,you can boot into download mode and flash it,but you must to download firmware and flash tool,and do not forget to download driver to make your PC know your device,google it for get the firmware and the tutorial for your device hope it helped
Click to expand...
Click to collapse
Bro, what you mean by firmware?
I already have firmare.info file of my phone. I also extracted recovery.img, boot.img etc.
Will you please guide me in detail? Please!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I'd really appreciated your kind help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Hello,
I just received my brand new Samsung Galaxy A40 (SM-A405FN) and I wanted to root it / install Custom Rom before anything else.
So I downloaded TWRP 3.4.0 for my phone and tryed flashing it. But that did not work, I was stuck in download mode. So I decided to reflash original firmware. During the flash, Odin stuck itself at "Boot" operation during more than 15min, so I decided to reboot the phone to retry (what a big mistake...).
And now, I can't access Bootloader mode anymore, I only have a blue screen with "An error has occured while updating the device software. Use Emergency Recovery function in smart switch PC software".
I downloaded Smart Switch and tried the emergency recovery, but no devices appears in the list. Same thing with Kies...
I'm lost, please tell me I did not completely brick my brand new phone :crying: ...
Thank's for help and sorry for bad english...
EDIT: Ok, the phone is not dead ! I finally got the download mode back with the correct timing for key strokes!
Can someone tell me why I can't boot after flashing this TWRP: https://twrp.me/samsung/samsunggalaxya40.html ?
I saw this post which tells to flash Kernel & VBMeta with the recovery but Odin can't flash .img files: https://forum.xda-developers.com/galaxy-a40/development/recovery-twrp-galaxy-a40-t4025587
solved?
Brick Problem solved yes, I still have not manage to install TWRP but at least I have been able to re-install stock firmware. Maybe I should do another thread for that problem
maybe you can try to enter the forum according to the device you are using.