Dear ALL Geniuses...!
I am running Noir A2 Lite, with Spreadtrum chip SP8810. I am stucked into Bootloop, and I am fully sure it is due to not clearing Dalvik-cache.
I was setting up the low internal memory issue with ext3 partition of Sdcard method using Pimk Rom, BusyBox etc. Everything was fine and in the end I got the internal memory increased but the phone was working slow so I thought to get back to the previous state where my genuine internal phone memory was existing. So I just done the RESET FACTORY from Settings of phone. After that it rebooted and still keeps rebooting again and again. I searched on the causes of BOOTLOOP and came to know it might happen due to not clearing DELVIK-CACHE.
Phone is rooted D Of course), and I can't boot into Recovery Mode, I don't know why because since I rooted I wasn't able to get into recovery mode by pressing any key combinations. But I can go into fastboot by pressing VOL+ and POWER button together.
Now anyone body here? Can you suggest me any way to resolve this problem?
Regards!!
bro,you should download your firmware for your device,then flash your phone,you can boot into download mode and flash it,but you must to download firmware and flash tool,and do not forget to download driver to make your PC know your device,google it for get the firmware and the tutorial for your device hope it helped
thank you for your reply
kelvinvalencio said:
bro,you should download your firmware for your device,then flash your phone,you can boot into download mode and flash it,but you must to download firmware and flash tool,and do not forget to download driver to make your PC know your device,google it for get the firmware and the tutorial for your device hope it helped
Click to expand...
Click to collapse
Bro, what you mean by firmware?
I already have firmare.info file of my phone. I also extracted recovery.img, boot.img etc.
Will you please guide me in detail? Please!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I'd really appreciated your kind help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Related
Hi guys, really need your help!!!
Been using Custom ROMs since Omnia HD. Loved the work of cookers, never had problems, ODIN is just so easy.
Four days ago, tried to flash I9100 from Lite'ning v5 to 6.1. So, as recommended I wiped cach with CWM, and then done proper FORMAT.
Once I pressed it, format started but didn't finish - the phone restarted, and continued to restart - stuck with boot "S" animation - so can't boot into system.
Then, tried as suggested to install VANILA latest firmware - tried it - didn't work. Keeps freezing in the middle of the process in ODIN - or - it says FAILED. Now, i can't use CWM - if I press Volume UP +HOME+POWER, i get "Mobile phone with yellow Triangle with PC signs" - left to the right.
Updating to the VANILA software doesn't work, so as Lite'ning V6, or any other versions of it. Without CWM, i can't boot from SD Card to other cooked roms, so please, any ideas will be MUCH APPRECIATED !!!
morespama2k .at. yahoo
I have never tried this before myself, but I have seen some people recommend trying an emergency firmware recovery with kies. If someone else can chime in and correct me if I am wrong, please do so.
emergency firmware recovery with kies - will try now, and update status...
Solution doesn't work
SugarySnack said:
I have never tried this before myself, but I have seen some people recommend trying an emergency firmware recovery with kies. If someone else can chime in and correct me if I am wrong, please do so.
Click to expand...
Click to collapse
This solution doesn't work. Because, all that I can do is to log into DOWNLOAD MODE, once I connect the phone via USB to PC with Kies ON, then the Kies doesn't recognise the phone in this mode, so there is opportunity or possibility to do an emergency firmware recovery - if anybody knows anything abt this - please comment ....
morespama5k said:
This solution doesn't work. Because, all that I can do is to log into DOWNLOAD MODE, once I connect the phone via USB to PC with Kies ON, then the Kies doesn't recognise the phone in this mode, so there is opportunity or possibility to do an emergency firmware recovery - if anybody knows anything abt this - please comment ....
Click to expand...
Click to collapse
Put the phone in recovery mode with Volume UP +HOME+POWER (it won't be CWM because you tried to flash stock, it is samsung's recovery mode), "Mobile phone with yellow Triangle with PC signs" and try it.
Let me know how it goes.
just checking... when you flashed through odin, was kies turned off? Meaning not even in the background and it's (process) not present in task manager?
Because that's what happend to me when i tried to flash a kernel to my SGS2. odin failed too but good thing my phone wasn't bricked.
Anyways, I would recheck the custom rom you downloaded, it sounds like the file was incomplete, or damaged during download. Always check the MD5 checksum, or at least the filesize.
Some custom ROMs cannot rebuild a formatted userdata partition. Most custom kernels cannot do that, so doing a factory reset (wipe userdata partition, format data partition, etc) is not recommended.
FIX:
Boot into Clockwork Recovery
Format cache, format system, format boot, format userdata partitions
Boot into Download Mode
Use ODIN to flash to Stock ROM
Boot into Stock ROM
Flash Custom ROM (Lite'ning), DO NOT FORMAT USERDATA and DO NOT FACTORY RESET!!
Boot into Lite'ning
CM7 using codeworkx kernel (CM7 kernel), is the only custom rom that does not have a rebuild userdata partition problem.
for my i9100 i solved this problem
i have the same issue and i solved with my i9100:
unmount battery and leave it for 20 sec
push up vol and home and keep it then put the battery !!!!! put vol up and home still pushed
if ....if you entry in recovery mode wipe data and cache and .... voila...
sorry for my bad english...hope this will work for you guys !!!
Jig from ebaaaaay .
Sent from my GT-I9100 using xda premium
I Have a I9100 ,It Has android cod ,I tried by hard reset ,hard reset complate but cod stil present.then i flash it by odin3 ,flash complate then start up and friz.then i open its Batery and put it again then try to flash again .but its sleeping now. dont going to download mod.not powering on .have any solution guys ?????????
Hi everyone.
I have a i9300 and it is stuck in rebooting.
Power key is ok.
I can get it to download mode or recovery mode.
I can wipe cache and partition but nothing change, it keeps rebooting.
I cant use odin because odin didn't see the phone,
I think USB debugging wasn't on. But I cant find a way to open it without turning on.
I am looking for possibilities and solution for 2 days and I cant find any. Please help me.
bootloop
It seems you are stuck in a boot loop. Try clearing the cache & perform a full factory wipe. Then reboot your device.
Hope that helps.
anshulmalviya said:
It seems you are stuck in a boot loop. Try clearing the cache & perform a full factory wipe. Then reboot your device.
Hope that helps.
Click to expand...
Click to collapse
thanks for answer. But I try that several times. Nothing changes.
Also I try partition wipe too. Sometimes I can see Samsung logo but I cant go further.
atilim said:
Hi everyone.
I have a i9300 and it is stuck in rebooting.
Power key is ok.
I can get it to download mode or recovery mode.
>> in recovery mounts and storage FORMAT system data cache sdcard .
Boot to download mode flash stock firmware via Odin .
I cant use odin because odin didn't see the phone,
>>> Thats either PC or Drivers usually see basic faqs .
I think USB debugging wasn't on. But I cant find a way to open it without turning on.
>>> Totally irrelevant .
Click to expand...
Click to collapse
I cant use odin because odin didn't see the phone,
>>> Thats either PC or Drivers usually see basic faqs .
I think USB debugging wasn't on. But I cant find a way to open it without turning on.
>>> Totally irrelevant .
Click to expand...
Click to collapse
You are right, it was computer malfunction. I can use odin now.
I have a i9300 and it is stuck in rebooting.
Power key is ok.
I can get it to download mode or recovery mode.
>> in recovery mounts and storage FORMAT system data cache sdcard .
Boot to download mode flash stock firmware via Odin .
Click to expand...
Click to collapse
I both try 4.1.2 (with odin) and 4.3 (with octopus) but it keeps rebooting.
I also use octopus box to flash and repair efs.
atilim said:
thanks for answer. But I try that several times. Nothing changes.
Also I try partition wipe too. Sometimes I can see Samsung logo but I cant go further.
Click to expand...
Click to collapse
If you've cleared the partition structure then you've turned a possible soft brick into a hard brick, you'll need a new motherboard now.
Try flashing the rescue firmware, from the thread in general, but I wouldn't hold out any hope.
Sent from my GT-I9300 using Tapatalk
same problem but worse please help
HI guys i have exactly the same problem but my bootloop was caused by installing recovery through the cwm app and then rebooting to recovery through the app. i rebooted to recovery with an app before and it caused this aswell ...however back then my volume down button was working. i fixed it last time by going into download mode and flashing philz recovery however i cant enter download mode or recovery or boot into system.
PS: my phone doesnt boot into recovery it comes up with the samsung galaxy s3 gt 19300 logo then it comes up with the cwm recovery icon in the middle of my screen and 'clockwordmod recovery v6.0.6.4' at the bottom of the screen then restarts itself.
i dont know what to try i have looked around, didnt want to create a new thread just wanted to find out if anyone has any idea of what i can do except for buying a new volume down button thats my last resort apprently its £35 to fix
easy way to fill up you thanks meter guys as any sort of input and advice is extremely appreciated.
alphadavid99 you fried your lcd when you flashed cwm made for note in the other thread.
Hi i have the issue... I am able to get in Recovery and Download Mode.
While in recovery i had formatted the whole internal memory and tried flashing about three AOSP ROMs (Formatting each time before Flashing) but the only result was the endless boot up screen (not boot loop).
Then i tried flashing a sammy ROM and it worked...
Could someone tell me why am I able to flash Sammy ROM but not AOSP (such as ARCHIDROID & SLIMBEAN).
My Model is GT-i9300
Current Modem - XXUGMK6
Current ROM - S4 Revolution ROM (TM)
Thanks in advance for your time if someone has any suggestions
anyone can help me? I've tried to root my cherry mobile flare s play, I've flash twrp on it but it always boot in recovery it doesn't boot in system partition so I tried wiping the cache and dalvik cache, still doesn't boot so I tried flashing another recovery/rom and it just get worst it's now stuck in boot loop I've already tried the abd reboot-bootloader and always fall in error: device not found., I hope someone notice my case. thanks
Hello, this happens when the system is actually corrupted
you may reflash stock then twrp then root again
or just get a custom recovery for your device
you must go in bootloader for stock rom or twrp for custom rom, and that's fine your phone just needs a rom and its good to go
good luck
TheShadowMC said:
Hello, this happens when the system is actually corrupted
you may reflash stock then twrp then root again
or just get a custom recovery for your device
you must go in bootloader for stock rom or twrp for custom rom, and that's fine your phone just needs a rom and its good to go
good luck
Click to expand...
Click to collapse
but how can I boot it on bootloader? key combinations like vol+ and power or any combo doesn't work, only if someone can teach me how to boot it on bootloader or fastboot then there would be no problem for me, I don't know what to do now
Hello again, take out the bettery then put it back and use the bootloader combo
if it didnt work take out the bettery and flash through sp flash tool
nothing to worry about, i didnt notice that your phone can be flashed through sp flash, since it just requires the phone to be off
not really such a scary situation
TheShadowMC said:
Hello again, take out the bettery then put it back and use the bootloader combo
if it didnt work take out the bettery and flash through sp flash tool
nothing to worry about, i didnt notice that your phone can be flashed through sp flash, since it just requires the phone to be off
not really such a scary situation
Click to expand...
Click to collapse
will it work even if my device don't have battery on it?
kiltot24 said:
will it work even if my device don't have battery on it?
Click to expand...
Click to collapse
sp flash for my knowledge would work even when the battery is out it doesnt matter, just load the scatter press download button and connect the phone with battery off
good luck again:highfive:
-Hope- said:
sp flash for my knowledge would work even when the battery is out it doesnt matter, just load the scatter press download button and connect the phone with battery off
good luck again:highfive:
Click to expand...
Click to collapse
in my case I can't flash even a recovery image using sp flash tool. any help? sorry if I look like an ignorant any way thanks for your help guys, I really appreciate
no no problem, however what's the problem ?
I'm trying to flash a custom recovery on it but it doesn't work, I'm trying to flash twrp, the one I've flash before, because I don't have the stock rom of my device so I'm doing the process partially. I'm aiming to flash twrp and then restore my saved back up.
Hello,
i think your device stock frimware is there on google, however when you try to flash what error does it give or what happens ?
It doesn't show any error message and not showing any progress at all. my device just blink showing that the battery is charging though the battery is not present.
if it didnt detect it try pressing the volume up or volume down to make sure while connected ( and download button is pressed
just blink until it reaches time out.
I'm sure that my cable is working, it works on other device. I already install all the drivers I need.
is there a way to stop my device from simultaneous booting? it appears to be detected on device manager but just for a few sec, then reboot and appear again.
ensure the ROM is loaded properly in the flash tool.
Switch off the phone and remove battery.
press the start button in the flash tool to initiate the ROM flashing process. The process will be in hold, waiting for the phone to accept the new firmware.
Now connect the phone to computer.
Try these. Press and hold VOLUME DOWN OR VOLUME UP OR POWER+VOLUME UP OR POWER+VOLUME DOWN. One of these should work and the flashing process should start.
can I obtain the stock rom from the same device? I have the same model and it works properly. I can't download the stock rom from mediafire it always fail due to poor internet connection so I'm looking for another way.
I tried updating my driver then my device was recognized but when I flash the recovery image it displays 100% but in red color.
kiltot24 said:
I tried updating my driver then my device was recognized but when I flash the recovery image it displays 100% but in red color.
Click to expand...
Click to collapse
are you using the latest sp flash tool ?
yes thanks my device works fine now thank you for your help, the only problem now is how will I restore my device imei, it can be changed in engineer mode using at+ command but it be deleted again once conduct a factory reset in short it just set a temporary imei for my device, is there a way to change my device imei permanently?
Hello all,
First of all, as a disclaimer: I am a total noob in this area. I just got my Ulefone T1, and tried to root it by installing TWRP and then installing SuperSU using TWRP. When I first installed TWRP, it worked and I got into the TWRP recovery menu. However, as the phone had to be wiped, I couldn't install the SuperSU zip anymore. I did a normal reboot to transfer the SuperSU zip to my phone, but when I then tried to turn my phone off and access TWRP, it went to normal recovery mode of my phone. As I wanted to start fresh off again, I went to the settings of my phone and did a factory reset silly.
Now, it is stuck in a bootloop where I can literally do nothing. I cannot access factory mode or recovery mode, all it does is just endlessly boot and turn off. I have managed to turn it off completely, but that's all I can do. Also, the battery is not removable.
Does anyone with a little more knowledge have a suggestion for me? Thanks in advance!
As an update, I got a suggestion to fully drain the battery, but that does not work either. I have tried connecting it to my PC, which is not working, but that was acting weird before. I guess it's just not possible?
did you work this out ? i am stuck in bootloop too ??????
Daviesjosh95 said:
did you work this out ? i am stuck in bootloop too ??????
Click to expand...
Click to collapse
I have no idea what software is necessary to do it for your device but you can flash stock rom, if it uses sp tool or something then download stock rom, use sp tool to flash it. Should be OK after that. As I am not familiar with this device I can't give you any other advice other than flashing stock rom.
Any solutions to unbricking/boot looping?
Have anyone found any solutions to unbricking phone??
Mine also did bootlooping after unlocking bootloader.
I was able to flash successfully but screen fussy and unreadable and not able to touch. I am able to hear but lines are on screen.
I have same problem, please, anyone help, I think I used wrong twrp image
Ulefone T1 Bootloop solution 2019.
I was able to fix the bootloop of my ulefone t1, just flash it with sp flash tool by following this guide:
1. Download the Stock Firmware on your personal computer.
2. Install the USB MTK Drivers (skip if you have it already installed).
3. Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
4. Click the Scatter-loading button to navigate to the stock Rom you just downloaded.
5. Select the Scatter File from the extracted Stock Firmware on your computer.
6. Select the Download Only in the SP flash tool option
7. Click the Download button to start the Formating process.
8. Connect your device via USB to the computer>> holding volume + and volume – button of your device at the same time or holding power button only so that the flashing process will starting working
9. Patiently wait for your device to be formatted.
10. After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
11. Unplug your device and boot it up.
12. If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
13. Voila, you are all good.
Very important step 8 of the guide.
Hello,
I just received my brand new Samsung Galaxy A40 (SM-A405FN) and I wanted to root it / install Custom Rom before anything else.
So I downloaded TWRP 3.4.0 for my phone and tryed flashing it. But that did not work, I was stuck in download mode. So I decided to reflash original firmware. During the flash, Odin stuck itself at "Boot" operation during more than 15min, so I decided to reboot the phone to retry (what a big mistake...).
And now, I can't access Bootloader mode anymore, I only have a blue screen with "An error has occured while updating the device software. Use Emergency Recovery function in smart switch PC software".
I downloaded Smart Switch and tried the emergency recovery, but no devices appears in the list. Same thing with Kies...
I'm lost, please tell me I did not completely brick my brand new phone :crying: ...
Thank's for help and sorry for bad english...
EDIT: Ok, the phone is not dead ! I finally got the download mode back with the correct timing for key strokes!
Can someone tell me why I can't boot after flashing this TWRP: https://twrp.me/samsung/samsunggalaxya40.html ?
I saw this post which tells to flash Kernel & VBMeta with the recovery but Odin can't flash .img files: https://forum.xda-developers.com/galaxy-a40/development/recovery-twrp-galaxy-a40-t4025587
solved?
Brick Problem solved yes, I still have not manage to install TWRP but at least I have been able to re-install stock firmware. Maybe I should do another thread for that problem
maybe you can try to enter the forum according to the device you are using.