i was unlocking bootloader , when i flashed the phone with E10_2.6.32.60-nAa-05
it stuck in booting , i flashed it again with X10 v1
and the phone now isfully bricked
no red light , no green light , no boot , nothing
help please , :crying:
And sorry for my bad english
talel55 said:
i was unlocking bootloader , when i flashed the phone with E10_2.6.32.60-nAa-05
it stuck in booting , i flashed it again with X10 v1
and the phone now isfully bricked
no red light , no green light , no boot , nothing
help please , :crying:
And sorry for my bad english
Click to expand...
Click to collapse
Yep, it's bricked... you need to have it j-tagged.
SmG67 said:
Yep, it's bricked... you need to have it j-tagged.
Click to expand...
Click to collapse
thanks for answer , but can you explain please
talel55 said:
thanks for answer , but can you explain please
Click to expand...
Click to collapse
The X10BLrelock kernel is for the Big X10, not for our little phones, it overwrites the little bit of address-space used to enable flashmode.
A repair shop with a JTAG machine can use the factory debug connections on the back of the mainboard to repair and flash fresh firmware, it's the only way to get your phone back to work.
SmG67 said:
The X10BLrelock kernel is for the Big X10, not for our little phones, it overwrites the little bit of address-space used to enable flashmode.
A repair shop with a JTAG machine can use the factory debug connections on the back of the mainboard to repair and flash fresh firmware, it's the only way to get your phone back to work.
Click to expand...
Click to collapse
Thnx a lot for helping
but it's expansive
Related
I brick my phone x10 mini and it's now stuck in SE white written name. I searched in forum and I found few solutions. I try flash tool and we succeeded to re-flash , but still not working. There has been no change, the phone remains stuck . (sorry for my english , but I don't speak very good english)
TNX in advanced !
Install SEUS on your PC/Laptop.
Switch off your phone and hold the back key whilst you insert your usb cable, the SEUS should reckognise your phone after you have accepted their T&C's and ready to reflash... It should work..
Warning: You will lose all your data what is stored on your phone memory.
tnx very much. work perfect !
awpboss said:
tnx very much. work perfect !
Click to expand...
Click to collapse
A pleasure to have helped you out!
There needs to be someway this is reinforced to everyone - Brick = SEUS.
Praise the internets for giving us this community.
Seus lol so easy but asked so much SEUS lol
TimmyHate said:
There needs to be someway this is reinforced to everyone - Brick = SEUS.
Praise the internets for giving us this community.
Click to expand...
Click to collapse
sent from this midget x10 mini pro using cm7.2.3.3 14.5
Can you give me the link for downloading SEUS that support X10 mini
Hi im have the same problem
But when im follow the steps to flash mode SEUS tellme its the latest version already in your Phone, and continue stuck in SE white logo
Please helpme to reflash if its posible im can go directly for gingerbread? 2.3.5 CM?
Thanks
sectorzero said:
Hi im have the same problem
But when im follow the steps to flash mode SEUS tellme its the latest version already in your Phone, and continue stuck in SE white logo
Please helpme to reflash if its posible im can go directly for gingerbread? 2.3.5 CM?
Thanks
Click to expand...
Click to collapse
Even with "ur phone is up to date" you r able to click on Repair button, that solves all your problems.
NOOB question!
albanezi said:
Install SEUS on your PC/Laptop.
Switch off your phone and hold the back key whilst you insert your usb cable, the SEUS should reckognise your phone after you have accepted their T&C's and ready to reflash... It should work..
Warning: You will lose all your data what is stored on your phone memory.
Click to expand...
Click to collapse
I guess I'm a total noob here, but how do you turn the phone off when it's stuck on the SE logo screen? I mean pressing and holding the power button doesn't do anything....
velo25 said:
I guess I'm a total noob here, but how do you turn the phone off when it's stuck on the SE logo screen? I mean pressing and holding the power button doesn't do anything....
Click to expand...
Click to collapse
Taking out the battery will put it off
In defense of the noobs around here i can't find the repair button n'or does SEUS give me the Install Anyway option. Have the latest SEUS and now i'm trying an older one hope it works, but for precaution can anybody post a link to an alternative flashing tool ? Much appreciated.
[Q] [Really Need Help] Xperia Neo would not start, only shows "sony ericsson" :(
Hi guys, I am new to this forum and a new smartphone user.
Last night I was updating my phone through PC companion, but the software dies half way for some unknown reason. Since then I could not turn on my phone.. It will only vibrates, shows "Sony Ericsson", and then an image of yellow triangle with an exclamation mark shows up, then it is turned off again. I tried charging, restarting my pc companion software to try to update my phone, but none of them work.
I saw some threads here and it seems that there are possible solutions, but because the terminology is quite strange to me I could not fully understand what I have to do What is a flashtool and SEUS? I tried to search them up on the net but the downloads seem to be unavailable?? I must be missing something here.
If anyone can help me with simple terminology I will really really appreciate it.. Thanks a lot!
Your phone's boot loader unlocked or not & if yes what method?(s1tool,official SE or setool2 paid) ? Here's a good tutorial about flashtool.
lilbunnyf said:
Hi guys, I am new to this forum and a new smartphone user.
Last night I was updating my phone through PC companion, but the software dies half way for some unknown reason. Since then I could not turn on my phone.. It will only vibrates, shows "Sony Ericsson", and then an image of yellow triangle with an exclamation mark shows up, then it is turned off again. I tried charging, restarting my pc companion software to try to update my phone, but none of them work.
I saw some threads here and it seems that there are possible solutions, but because the terminology is quite strange to me I could not fully understand what I have to do What is a flashtool and SEUS? I tried to search them up on the net but the downloads seem to be unavailable?? I must be missing something here.
If anyone can help me with simple terminology I will really really appreciate it.. Thanks a lot!
Click to expand...
Click to collapse
Hi,
This is my suggestion:
first download FlashTool_0.2.9.1_FOTAUnbrick
http://forum.xda-developers.com/showthread.php?t=1126358
Follow instructions (if u familiar with updating with sony ericsson pc companion, this u can do)
Simple, start FlashTool_0.2.9.1_FOTAUnbrick, click flash. Choose loader.sin on the right. Then click OK,
Turn of phone, hold in back button while connect phone with usb cable.
See its flashing, wait til its done, unplug phone,. try to boot up phone.
I am also a newbie, but this worked for me
pls give me a link to download SEUS, for xperia neo pls. pls help I am having the same problem pls help,
emailprashanthvg said:
pls give me a link to download SEUS, for xperia neo pls. pls help I am having the same problem pls help,
Click to expand...
Click to collapse
Try: http://dl-www.sonyericsson.com/cws/download/1/110/61/1323075336/Update_Service_Setup-2.11.12.5.exe
Guys dont panic if you bricked your phone go through the Xperia neo Forums and im sure you can unbrick your phone i have bricked my phone 2 times and i was able to unbrick !
http://forum.xda-developers.com/show....php?t=1126358 ...even i suggest this page because this is were i was able to unbrick my phone successfully !
Thank you guys! My phone is finally working again!
lilbunnyf said:
Thank you guys! My phone is finally working again!
Click to expand...
Click to collapse
Good! Enjoy your neo!
abhinav333 said:
Guys dont panic if you bricked your phone go through the Xperia neo Forums and im sure you can unbrick your phone i have bricked my phone 2 times and i was able to unbrick !
http://forum.xda-developers.com/show....php?t=1126358 ...even i suggest this page because this is were i was able to unbrick my phone successfully !
Click to expand...
Click to collapse
I don't think link is right mate, 404 page not found
Anyway @lilbunnyf if your phones boot loader is unlocked using s1tool method do not use seus or pc companion.As I read in forum this can brick your phone.Try flashtool.If you got a locked boot loader or patched one with setool2 then you can use pc companion(this thing saved my phone like 5-6 times now after kinda bricking it with roms kudos se for this xD)
lilbunnyf said:
Thank you guys! My phone is finally working again!
Click to expand...
Click to collapse
oh xD didn't saw this,Good
lilbunnyf said:
Thank you guys! My phone is finally working again!
Click to expand...
Click to collapse
Tell us how did you unbrick it, maybe in future someone will have the same problem as you
dioggo92 said:
Tell us how did you unbrick it, maybe in future someone will have the same problem as you
Click to expand...
Click to collapse
LOL so your are ready to brick your phone !
dioggo92 said:
Tell us how did you unbrick it, maybe in future someone will have the same problem as you
Click to expand...
Click to collapse
Most likely the post #3. That should help.
I have the same problem...
but mine already unlock using s1tool, rooted using zergexploit and using cwm...
i wanted to install se tweak so i use cwm the installation is complete after rebooting my phone is bricked... so please... im begging help me...
i've tried using flashtool to reflash to stock but i cant get my phone connected... it seems i cant go to fastboot mode...
I managed to get stuck in a boot loop today. I have a locked bootloader and SEUS did the job, so I guess that is the best solution for the problem mentioned by OP.
JOeYJAcX said:
I have the same problem...
but mine already unlock using s1tool, rooted using zergexploit and using cwm...
i wanted to install se tweak so i use cwm the installation is complete after rebooting my phone is bricked... so please... im begging help me...
i've tried using flashtool to reflash to stock but i cant get my phone connected... it seems i cant go to fastboot mode...
Click to expand...
Click to collapse
Since you unlock it via s1tool, you should still be able to use SEUS.
Anw, why fastboot mode? Have you tried to connect it in flashmode?
Hi
My experia ray is died now
I've flashed " ICS pureness " and work correctly .
then I try to flash baseband , which come with the rom .
the phone reboot then stop working !
No power
No lights ! ( green or blue )
No vibration
not recognize with the laptop
I can't boot with fastboot nor flashmode !
I can see him as a " QHSUSB_DLOAD "
==============
any help ?
any idea ?
please.
hi
u can use wotanserver it ll solve
If can't solve you have to find someone who have octopusbox or other..
wotanserver : It can't descover my phone .
octopusbox : I'm from Syria , here I can't find or bey like this tools
can I make it on my home ?!
thanks
ahmad.omr said:
wotanserver : It can't descover my phone .
octopusbox : I'm from Syria , here I can't find or bey like this tools
can I make it on my home ?!
thanks
Click to expand...
Click to collapse
And you can connect thru Flastools?
Xmasp said:
And you can connect thru Flastools?
Click to expand...
Click to collapse
It can't find my phone !
This happened to me in february with my Xperia X8. The weird thing is I totally killed my phone trying to opening the bootloader, but you say your Ray is dead 'cause you installed Pureness and flashed a baseband; I'm not an expert but I think flashing the baseband messed with the bootloader, of course, if I'm wrong please someone correct me.
I tried to revive my X8 with all methods I found around the web, with no results. The only advice I can give is trying to find a person with Medusa Box and see if he can bring your Ray back to life, but this may be quite hard.
Or... Sending to SONY support, maybe they could fix it, as you didn't touch the bootloader, but if it was already unlocked, then they wouldn't do anything for you.
send it to sony support, if you still have warranty but unlocked bootloader, then they will charge some fees, if you still have warranty and didnt unlocked bootloader, maybe they'll fix it for free, but if you dont have warranty chances are they wont fix it for you.
XrayCharles said:
send it to sony support, if you still have warranty but unlocked bootloader, then they will charge some fees, if you still have warranty and didnt unlocked bootloader, maybe they'll fix it for free, but if you dont have warranty chances are they wont fix it for you.
Click to expand...
Click to collapse
did you try and fix with seus/sus.....if it doesn't won't to work try these instructions: http://forum.xda-developers.com/showthread.php?t=1492805&highlight=unbrick
I think if u flash baseband, the phone should be back to factory reset...
I have flashed via flashtool new baseband on stock rom ics, from .72 to .77
After reboot,all of my apps have gone..just like we buy a new phone...
But i dont know in pureness (custom rom)... is that baseband made the phone to factory reset or not...
I think u should inject ur phone with JTAG.. This somekind of stuff that sony nor samsung have at the customer service...
It used to hardbricked phone
Sent from my ST18i using xda premium
ahmad.omr said:
Hi
My experia ray is died now
I've flashed " ICS pureness " and work correctly .
then I try to flash baseband , which come with the rom .
the phone reboot then stop working !
No power
No lights ! ( green or blue )
No vibration
not recognize with the laptop
I can't boot with fastboot nor flashmode !
I can see him as a " QHSUSB_DLOAD "
==============
any help ?
any idea ?
please.
Click to expand...
Click to collapse
how did you get to this mode?
This mode basically is under qualcomm usb download mode. I'm not sure but you can try to search under htc forum where got lot of powerful dev for this prob. I think you have to install like qualcomm usb driver in order for the phone to be properly detected by the computer. Then you need some kind of qualcomm program in order to use the phone with? probably qms or something? try google for "QHSUSB_DLOAD"
I had the same situation. nothing will help here. flash memory is dead. so in my case I flashed ics then stock rom and it rebooted and same symptoms . so the only way out was to buy broken xperia ray on ebay and change phone's "motherboard"
Hi,
I've get my girlfriend brother's phone to check - so it is bricked. I do not know how he did this. But phone is not turning on, no led light or sth. But it is known on PC as QHSUSB_DLOADER - I do not have drivers for this mode.
I've tested all methods to get it to flash mode for FlashTool, but it is not working.
Any sugestions?
emm
First, can you explain better how the phone bricked??
have you tried flashing http://forum.xda-developers.com/attachment.php?attachmentid=953586&d=1332104415
extract tft and put it into flashtool/frimwares , then flash it..
if it does not work, then your in troubles.. you may need a medusa box to solve it.
Nachospeicys said:
First, can you explain better how the phone bricked??
have you tried flashing http://forum.xda-developers.com/attachment.php?attachmentid=953586&d=1332104415
extract tft and put it into flashtool/frimwares , then flash it..
if it does not work, then your in troubles.. you may need a medusa box to solve it.
Click to expand...
Click to collapse
I do not know how it was bricked, but he said that, the power on button does not work, after phone died, before it his PC doen not recognise phone, my on my PC phone is known as as mentioned before - I do not have drivers for this strange named device
AFAIK, your phone is permanently bricked. It's loader is corrupted which has caused it to go to factory service mode. You have to take it to Sony service center or have an expert JTAG the phone to recover it. BTW, How did he do this?
Have you tried installing the drivers from flashtool folder and connect it in flashmode?
I think it's hardbricked, too, and you have to take it to sony
prime_225 said:
AFAIK, your phone is permanently bricked. It's loader is corrupted which has caused it to go to factory service mode. You have to take it to Sony service center or have an expert JTAG the phone to recover it. BTW, How did he do this?
Click to expand...
Click to collapse
I do not know how he did this ) I've installed proper drivers for WT19i on FlashTool - no way to flash anything.
Expert JTAG? it is some kind of service box or it is special thing that only Sony service have got?
wiewiorcwaniak said:
Hi,
I've get my girlfriend brother's phone to check - so it is bricked. I do not know how he did this. But phone is not turning on, no led light or sth. But it is known on PC as QHSUSB_DLOADER - I do not have drivers for this mode.
I've tested all methods to get it to flash mode for FlashTool, but it is not working.
Any sugestions?
Click to expand...
Click to collapse
Have you tried to connect the phone to pc while holding the volume up button.........a blue led must glow up
If the phone connects .......that means you can flash a kernel by fastboot method
http://forum.xda-developers.com/showthread.php?t=1322827
JTag cable is now only solution for your mobile.
To look for jtag cable Google it and look for a dealer in your region and call, them they will give you right solution.
Don't worry bro your phone will revive with it as I have revived my phone twice
Sent from my LiveWithWalkman using xda app-developers app
Nachospeicys said:
First, can you explain better how the phone bricked??
have you tried flashing http://forum.xda-developers.com/attachment.php?attachmentid=953586&d=1332104415
extract tft and put it into flashtool/frimwares , then flash it..
if it does not work, then your in troubles.. you may need a medusa box to solve it.
Click to expand...
Click to collapse
you are a expert it work
Strange, It is the 1st time to see a bricked xperia 2011 phone!!
Sent from my Xperia Mini using xda app-developers app
Hi guys, i don't know how to solve a problem with my Sola. I read the recover soft-brick guide for xperia models but i can't solve it. I think i bricked.
When i try to turn on it's on Sony screen and there's nothing to do. I can use on flash mode and flash the kernel but the result is the same when i turn on. The led works like green in flash mode, or red when i finish the flash and the device is still connected. I have a locked bootloader, and all this happened when i wanted to restore a backup, i probably made a mistake: do a full wipe after that. I think that's is still in warranty, isnt' it? What can i do? There are some tips on the tutorial but i'm afraid to kill the battery or make other mistakes. Please help me guys.
And sorry for my bad english =(
brimbi said:
Hi guys, i don't know how to solve a problem with my Sola. I read the recover soft-brick guide for xperia models but i can't solve it. I think i bricked.
When i try to turn on it's on Sony screen and there's nothing to do. I can use on flash mode and flash the kernel but the result is the same when i turn on. The led works like green in flash mode, or red when i finish the flash and the device is still connected. I have a locked bootloader, and all this happened when i wanted to restore a backup, i probably made a mistake: do a full wipe after that. I think that's is still in warranty, isnt' it? What can i do? There are some tips on the tutorial but i'm afraid to kill the battery or make other mistakes. Please help me guys.
And sorry for my bad english =(
Click to expand...
Click to collapse
Have you tried to flash a stock firmware with flashtool?
elia222 said:
Have you tried to flash a stock firmware with flashtool?
Click to expand...
Click to collapse
Yes and flash is ok but when i turn on it's still on sony screen...i waited about 5 minutes. I tried with 6.1.1.B.1.54 and with 6.1.1.B.1.1.0 with same result. I know i have to wait after flash a stock firmware but i see it's too much time. Maybe because when i want to switch off i have to use hard reset (i mean with all 3 button). I don't know..thanks to reply in any case
brimbi said:
Yes and flash is ok but when i turn on it's still on sony screen...i waited about 5 minutes. I tried with 6.1.1.B.1.54 and with 6.1.1.B.1.1.0 with same result. I know i have to wait after flash a stock firmware but i see it's too much time. Maybe because when i want to switch off i have to use hard reset (i mean with all 3 button). I don't know..thanks to reply in any case
Click to expand...
Click to collapse
In any case, if you don't solve the issue by yourself, your phone is still in warranty (just don't say to the reparation service that you played with flashtool )
elia222 said:
In any case, if you don't solve the issue by yourself, your phone is still in warranty (just don't say to the reparation service that you played with flashtool )
Click to expand...
Click to collapse
Yep i hope. What can i do now? When i charge it turn on by itself and always on sony logo (but led is off)
Also when i flash and it's still on usb port the led is red but the device is off, i'm looking for a solution on RECOVER SOFT-brick thread but i don't know in which part am i.
brimbi said:
Yep i hope. What can i do now? When i charge it turn on by itself and always on sony logo (but led is off)
Also when i flash and it's still on usb port the led is red but the device is off, i'm looking for a solution on RECOVER SOFT-brick thread but i don't know in which part am i.
Click to expand...
Click to collapse
You tried with the Sony PC Companion/Update Service? It uses flashmode.. When I bricked my U i had relocked my bootloader and flashed via PC Companion... Worked for me :fingers-crossed:
Press thanks if I helped:good:
Try to start from the beginning, and follow the instructions carefully.
dotafan said:
You tried with the Sony PC Companion/Update Service? It uses flashmode.. When I bricked my U i had relocked my bootloader and flashed via PC Companion... Worked for me :fingers-crossed:
Press thanks if I helped:good:
Click to expand...
Click to collapse
But i have a locked bootloader, will i invalidate warranty? i'm going to try with pc companion =)
No it won't!!
If you were on a custom rom flash kernel/ftf via flashtool nd then use PC Companion:thumbup:
Sent from my ST25i using xda app-developers app
It works!!!!!!!!
dotafan said:
No it won't!!
If you were on a custom rom flash kernel/ftf via flashtool nd then use PC Companion:thumbup:
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
It works! My sola works now! Thank you guys! Thank you very much!
brimbi said:
It works! My sola works now! Thank you guys! Thank you very much!
Click to expand...
Click to collapse
Glad I could help :good: