Ive been searching for 3 days and dont know what the problem is. Im on mj7 with safestrap 3.71. I can flash roms in slot 1 and they boot fine. Everything works except I cant get any mobile data. Ive tried flashing mkj module files but it doesnt make a difference. Thanks!!
Are you Verizon? Do you mean mk2? Or is that a build from another carrier?
Sent from my SCH-I545 using Tapatalk
maniac2k said:
Ive been searching for 3 days and dont know what the problem is. Im in mkj with safestrap 3.71. I can flash roms in slot 1 and they boot fine. Everything works except I cant get any mobile data. Ive tried flashing mkj module files but it doesnt make a difference. Thanks!!
Click to expand...
Click to collapse
And also quick question... You're saying that on your stock slot..running stock mk2 you DO have data? Just trying to rule out possible Sim card problem.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Sorry guys. Im on build mj7 on verizon. The stock slot works perfectly with data. Ive tried several tw roms and even flashed them in the stock slot and I get no mobile data. Ive tried stock kernel, kt kernel, flashing the mj7 modules, and reflashing the modem. I can only get mobile data with the factory flashed odin rom.
I did a twrp restore of m1a3 rom into slot 1 and did get mobile data. Im obviously missing some kind of file. I just dont know what it is. Here is the link of the ss restored rom that worked.
http://forum.xda-developers.com/showthread.php?t=2612862
If I flash the same rom and modules I dont get data.
maniac2k said:
Sorry guys. Im on build mj7 on verizon. The stock slot works perfectly with data. Ive tried several tw roms and even flashed them in the stock slot and I get no mobile data. Ive tried stock kernel, kt kernel, flashing the mj7 modules, and reflashing the modem. I can only get mobile data with the factory flashed odin rom.
Click to expand...
Click to collapse
Just a side note since your using safestrap unless I've missed something new in the past week.. You can only run the stock kernel. And since your on mj7 you'd only be able to flash TW ROMs based off of mj7 or mk2 using your mj7 modules. I'm not 100% right now where you're problem lies.
Flashing to the stock slot is risky and unfortunately sometimes the only remedy is to Odin back to stock and start again making sure you're using the correct ROM , modules.
Sent from my SCH-I545 using XDA Premium 4 mobile app
---------- Post added at 03:26 PM ---------- Previous post was at 03:21 PM ----------
I'm sure someone smarter than I may have an idea or two for you sorry I can't help more
Sent from my SCH-I545 using XDA Premium 4 mobile app
Correct. I am only flashing mj7 compatible roms and mj7 modules. Specifically the latest hyperdrive rom with stock kernel and mj7 modules downloaded from the ss thread. I only tried kt kernel as an all else failed attempt.
maniac2k said:
Correct. I am only flashing mj7 compatible roms and mj7 modules. Specifically the latest hyperdrive rom and mj7 modules downloaded from the ss thread.
Click to expand...
Click to collapse
I figured. Seems like you have a handle on all that. You said earlier you were trying different kernels... Last I know trying to flash a different kernel wouldn't even do much because of the security on that phone... And I wouldn't think that'd mess you're data up but you never know. The data should work right out the box for you on hyperdrive.
Sent from my SCH-I545 using XDA Premium 4 mobile app
I'm still at a loss. Can someone tell me what files are needed to provide mobile data access?
@maniac2k
I don't know.. Maybe look into the settings you get into from the dialer to check and see if anything in there is disabled as far as data/3g/4g ? Obviously you've checked your APN settings as well? If your stock didn't get data either I'd say your sim card is acting up. I know there's a thread on here for the dialer settings I've done it before myself just forget what they are. Until someone else has an idea might be worth a try
Sent from my SCH-I545 using XDA Premium 4 mobile app
maniac2k said:
Ive been searching for 3 days and dont know what the problem is. Im on mj7 with safestrap 3.71. I can flash roms in slot 1 and they boot fine. Everything works except I cant get any mobile data. Ive tried flashing mkj module files but it doesnt make a difference. Thanks!!
Click to expand...
Click to collapse
whatever build base you are, MJ7....you flash the MJ7 kernel module patch. If you Mk2 buildbase, you flash the Mk2 kernel patch..... Be sure the kernel patch is a valid download, You do this after installing rom and before first boot.
don't know what else to tell you
Are there any AOSP roms compatible with safe strap
rosser725 said:
Are there any AOSP roms compatible with safe strap
Click to expand...
Click to collapse
No
Sent from my NCC-1701 using Tapatalk 4
Related
OK so I'm brand new here and I've been reading for hours but haven't found what I'm looking for....I'm looking for a step by step of how to install the newest hyperdrive on my mk2 build. I've installed the newest safestrap and backed up my system. If someone could give me a step by step including everything as if I was a dumbass (although it's only half true ) I would be extremely grateful!!!
I just need to know if you can use the MJ7 modules with MK2. From what I read after SS is installed you install HD11 and the modules too. I'm pretty sure you need to install the modules or it wont work, except on hashcodes thread it says mk2 is coming soon, so either we can use MJ7 modules or have to wait.
ironster said:
OK so I'm brand new here and I've been reading for hours but haven't found what I'm looking for....I'm looking for a step by step of how to install the newest hyperdrive on my mk2 build. I've installed the newest safestrap and backed up my system. If someone could give me a step by step including everything as if I was a dumbass (although it's only half true ) I would be extremely grateful!!!
Click to expand...
Click to collapse
so you rooted, have safestrap installed? ...you want to know how to install hyperdrive in a rom slot? have you created a rom slot yet? There are a couple videos out there on youtube that shows how to use safestrap
Hey, also fairly new around here. If you don't mind me asking, How did you manage to get safestrap on MK2? I was checking last night and it seemed like hashcode didn't finish getting safestrap working yet. Thanks!
Sent from my SCH-I545 using xda app-developers app
decaturbob said:
so you rooted, have safestrap installed? ...you want to know how to install hyperdrive in a rom slot? have you created a rom slot yet? There are a couple videos out there on youtube that shows how to use safestrap
Click to expand...
Click to collapse
No I think I can figure out how to make the slot....mostly I'm trying to figure out what files I have to flash after flashing main hyperdrive rom.
Sent from my SCH-I545 using xda app-developers app
ProtossPaul said:
Hey, also fairly new around here. If you don't mind me asking, How did you manage to get safestrap on MK2? I was checking last night and it seemed like hashcode didn't finish getting safestrap working yet. Thanks!
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Just installed it like a regular apk. Search for the newest version 3.70, put it on your internal SD card and install!
ironster said:
No I think I can figure out how to make the slot....mostly I'm trying to figure out what files I have to flash after flashing main hyperdrive rom.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
if you are rooted and have safestrap 3.7 installed. On mk2 base you will need the mk2 kernel module and hyperdive 11 zip.....in safestrap you can install multiple zips so you selected the HD11 zip, follow by the mk2 module. The two have to be installed together with no reboot between
be good to go
a search in dev thread for mk2 module should turn up something
this is not the mk2 radio but a kernel module that safestrap needs for the base ROM to work especially the wifi portion
decaturbob said:
if you are rooted and have safestrap 3.7 installed. On mk2 base you will need the mk2 kernel module and hyperdive 11 zip.....in safestrap you can install multiple zips so you selected the HD11 zip, follow by the mk2 module. The two have to be installed together with no reboot between
be good to go
a search in dev thread for mk2 module should turn up something
this is not the mk2 radio but a kernel module that safestrap needs for the base ROM to work especially the wifi portion
Click to expand...
Click to collapse
OK so those were actually my questions....boot to safestrap wipe then create new slot...flash hyper then mk2 module without reboot....and finally what's with the radios thing? I need to flash a 3rd file?
Sent from my SCH-I545 using xda app-developers app
decaturbob said:
if you are rooted and have safestrap 3.7 installed. On mk2 base you will need the mk2 kernel module and hyperdive 11 zip.....in safestrap you can install multiple zips so you selected the HD11 zip, follow by the mk2 module. The two have to be installed together with no reboot between
be good to go
a search in dev thread for mk2 module should turn up something
this is not the mk2 radio but a kernel module that safestrap needs for the base ROM to work especially the wifi portion
Click to expand...
Click to collapse
Oh so mk2 module is released? Hash's thread says its coming soon. I'll search for it, thanks.
ironster said:
OK so those were actually my questions....boot to safestrap wipe then create new slot...flash hyper then mk2 module without reboot....and finally what's with the radios thing? I need to flash a 3rd file?
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
you should already have the radio as part of your base....
MK2 modules
Sent from my SCH-I545 using XDA Premium 4 mobile app
Just to confirm.
It states the compatibility for RLS11 is MDK Base phones or MJ7 Base using Safestrap. It should, however, work with an MK2 Base with the MK2 module, right?
Thanks.
TheColorRed said:
Just to confirm.
It states the compatibility for RLS11 is MDK Base phones or MJ7 Base using Safestrap. It should, however, work with an MK2 Base with the MK2 module, right?
Thanks.
Click to expand...
Click to collapse
Correct. Assume you are rooted.
Sent from my SCH-I545 using XDA Premium 4 mobile app
decaturbob said:
Correct. Assume you are rooted.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Great. Thanks a bunch.
Can't post in development yet, but figured it's relevant. I followed directions in OP and hyper drive is working flawlessly. Thanks for the rom, and thanks to hash for the new mk2 SS!
gnubian said:
Can't post in development yet, but figured it's relevant. I followed directions in OP and hyper drive is working flawlessly. Thanks for the rom, and thanks to hash for the new mk2 SS!
Click to expand...
Click to collapse
Which modules did you flash?
Is your wifi working?
Can you create a group play?
Just a few issues I had after flashing last night. Great feel other wise.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Hi guys,
If I already have a mk2 verizon s4, would I still need to flash the mk2 modules after flashing a mk2 base rom (hyperdrive rls 14)? I have gotten both answers- Yes, flash and No, don't flash- and I am not sure which one is actually correct.
Raymondlikesroot said:
Hi guys,
If I already have a mk2 verizon s4, would I still need to flash the mk2 modules after flashing a mk2 base rom (hyperdrive rls 14)? I have gotten both answers- Yes, flash and No, don't flash- and I am not sure which one is actually correct.
Click to expand...
Click to collapse
I'm also a Safestrap user and I ALWAYS flash the MK2 kernel modules. I'm pretty sure you have to, but I'm not positive. Like I said I always flash the modules and I haven't had any problems .
Raymondlikesroot said:
Hi guys,
If I already have a mk2 verizon s4, would I still need to flash the mk2 modules after flashing a mk2 base rom (hyperdrive rls 14)? I have gotten both answers- Yes, flash and No, don't flash- and I am not sure which one is actually correct.
Click to expand...
Click to collapse
It's what you have to do...
Sent from my SCH-I545 using XDA Premium 4 mobile app
decaturbob said:
It's what you have to do...
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok thanks. Sorry if I disappointed you or anything... it's just that I heard from rootjunky on youtube that I didn't need to flash mk2 modules when I already had mk2.
Raymondlikesroot said:
Ok thanks. Sorry if I disappointed you or anything... it's just that I heard from rootjunky on youtube that I didn't need to flash mk2 modules when I already had mk2.
Click to expand...
Click to collapse
if you are running safestrap, you have to flash the kernel modules for your specific build base.
Raymondlikesroot said:
Hi guys,
If I already have a mk2 verizon s4, would I still need to flash the mk2 modules after flashing a mk2 base rom (hyperdrive rls 14)? I have gotten both answers- Yes, flash and No, don't flash- and I am not sure which one is actually correct.
Click to expand...
Click to collapse
That would only be the case if you took the highly risky case of flashing over the stock ROM using Safestrap. If you flash to a non-stock slot, you must always flash the relevant kernel modules.
Hi, Iv been having trouble installing the Hyperdrive ROM with safestrap. I installed HP 14 with SS 3.71 with the modules for my divice (MK2). It says it installed successfully but it just stays at the boot screen. Any ideads? My stock ROM is deleted..
Thanks!
High_Rez said:
Hi, Iv been having trouble installing the Hyperdrive ROM with safestrap. I installed HP 14 with SS 3.71 with the modules for my divice (MK2). It says it installed successfully but it just stays at the boot screen. Any ideads? My stock ROM is deleted..
Thanks!
Click to expand...
Click to collapse
Hey again! So this is a new scenario now from last time or same issue? If you made a backup of your stock before you flashed to it, maybe you can restore but not a gaurentee.
You never were able to get Odin to see your phone?
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Hey again! So this is a new scenario now from last time or same issue? If you made a backup of your stock before you flashed to it, maybe you can restore but not a gaurentee.
You never were able to get Odin to see your phone?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
No. Same issue. I just never got a fix. Odin finally saw it and i tried to flash the "No-wipe" one like you (I think) said to use, but it said failed. I probably used the wrong option, im not familiar with odin or how to use it.
High_Rez said:
No. Same issue. I just never got a fix. Odin finally saw it and i tried to flash the "No-wipe" one like you (I think) said to use, but it said failed. I probably used the wrong option, im not familiar with odin or how to use it.
Click to expand...
Click to collapse
Try using this mj7 full wipe from here then
http://forum.xda-developers.com/showthread.php?t=2507253
When mk2 one fail you may have better luck with mj7
Sent from my SCH-I545 using Tapatalk
---------- Post added at 12:12 PM ---------- Previous post was at 12:09 PM ----------
Put phone into download mode.
Put the unzipped file into PDA or AP depending on Odin version.
Make sure only Auto Reboot and F Reset Time are checked.
Onces that's all set and Odin shows your phone connected. Hit start.
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Try using this mj7 full wipe from here then
http://forum.xda-developers.com/showthread.php?t=2507253
When mk2 one fail you may have better luck with mj7
Sent from my SCH-I545 using Tapatalk
---------- Post added at 12:12 PM ---------- Previous post was at 12:09 PM ----------
Put phone into download mode.
Put the unzipped file into PDA or AP depending on Odin version.
Make sure only Auto Reboot and F Reset Time are checked.
Onces that's all set and Odin shows your phone connected. Hit start.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Wouldnt the mj7 screw it up since its not my basebuild? Would it change my basebuild from MK2 to MJ7?
High_Rez said:
Wouldnt the mj7 screw it up since its not my basebuild? Im really on edge about odin
Click to expand...
Click to collapse
No you can go back and forth between mk2 and mj7 those are the only two. You cannot go down past mj7.
I bet if you did this you'd be good. There's a possibility you may need the Pit file but I think this file alone should get you back to normal. You really have nothing to lose at this point.
Sent from my SCH-I545 using Tapatalk
---------- Post added at 12:37 PM ---------- Previous post was at 12:35 PM ----------
High_Rez said:
Wouldnt the mj7 screw it up since its not my basebuild? Would it change my basebuild from MK2 to MJ7?
Click to expand...
Click to collapse
Make sure you unzip that Odin file and put the .TAR file into the PDA slot. Not the whole zip you initially download.
Sent from my SCH-I545 using Tapatalk
Mistertac said:
No you can go back and forth between mk2 and mj7 those are the only two. You cannot go down past mj7.
I bet if you did this you'd be good. There's a possibility you may need the Pit file but I think this file alone should get you back to normal. You really have nothing to lose at this point.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
I have Hyperdrive on my sd im going to install, do i need to change this out for a diffrent one because im going to use mj7?
High_Rez said:
I have Hyperdrive on my sd im going to install, do i need to change this out for a diffrent one because im going to use mj7?
Click to expand...
Click to collapse
Well I don't think anything is going to install or restore correctly for you since your stock slot is screwed up.
You can Odin the mj7.
Then re root
Install SafeStrap again
Reflash Hyperdrive but this time you want the mj7 modules since that is what your stock is going to be. Do you follow me?
Basically you just want to bring your phone back to life first. Before you worry about anything else.
Getting mj7 modules is very easy.
And I'd suggest next time to just install hyperdrive on a ROM slot not your stock slot. If at that point you need help the folks in the SafeStrap thread would definitely help you
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Well I don't think anything is going to install or restore correctly for you since your stock slot is screwed up.
You can Odin the mj7.
Then re root
Install SafeStrap again
Reflash Hyperdrive but this time you want the mj7 modules since that is what your stock is going to be. Do you follow me?
Basically you just want to bring your phone back to life first. Before you worry about anything else.
Getting mj7 modules is very easy.
And I'd suggest next time to just install hyperdrive on a ROM slot not your stock slot. If at that point you need help the folks in the SafeStrap thread would definitely help you
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Alright, I Flashed my MK2 thing in odin and the phone is running and rooted. now should I install safestrap, create a second rom slot, then install JUST hyperdrive rsl14 and notthing else? or do i need to install "Modules"??
http://forum.xda-developers.com/showthread.php?t=2630040
That thread has SafeStrap Roms for you.
First backup your stock slot
Then create a ROM slot and then activate it.
Then flash whatever ROM you want on that slot.. and flash modules after the ROM flashes .
Always flash modules.
Sent from my SCH-I545 using Tapatalk
---------- Post added at 01:41 PM ---------- Previous post was at 01:32 PM ----------
Just wondering... Was the issue you were having all along caused by maybe not unzipping the Odin file to get the tar file?
Sent from my SCH-I545 using Tapatalk
Mistertac said:
http://forum.xda-developers.com/showthread.php?t=2630040
That thread has SafeStrap Roms for you.
First backup your stock slot
Then create a ROM slot and then activate it.
Then flash whatever ROM you want on that slot.. and flash modules after the ROM flashes .
Always flash modules.
Sent from my SCH-I545 using Tapatalk
---------- Post added at 01:41 PM ---------- Previous post was at 01:32 PM ----------
Just wondering... Was the issue you were having all along caused by maybe not unzipping the Odin file to get the tar file?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
The odin issue was becuase i was using the wrong option. I just tried to install hyperdrive and the one MK2 modules, I installed SS 3.70 not 3.71. Im having the same problem. Ill check out that list.
High_Rez said:
The odin issue was becuase i was using the wrong option. I just tried to install hyperdrive and the one MK2 modules, I installed SS 3.70 not 3.71. Im having the same problem. Ill check out that list.
Click to expand...
Click to collapse
Yea make sure the ROM your interested in says its for SafeStrap. Last I saw the Hyperdrive file said SafeStrap right in the file name.
Again that list is a good thing to go by too.
Just make sure you read a lot that's all. All the info is on here for you. Good luck man
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Yea make sure the ROM your interested in says its for SafeStrap. Last I saw the Hyperdrive file said SafeStrap right in the file name.
Again that list is a good thing to go by too.
Just make sure you read a lot that's all. All the info is on here for you. Good luck man
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Iv been going around every where, I cant find a fix for this at all. Iv reinstalled safestrap, Iv done a factory reset on the phone, still same issue, diffrent roms.. I have it up and running as my phone i use now, but is it possible to flash ME7? if i delete the stock ROM??
High_Rez said:
Iv been going around every where, I cant find a fix for this at all. Iv reinstalled safestrap, Iv done a factory reset on the phone, still same issue, diffrent roms.. I have it up and running as my phone i use now, but is it possible to flash ME7? if i delete the stock ROM??
Click to expand...
Click to collapse
No you cannot downgrade past mj7.
I thought you were back on track. What is the actual problem you're having now? Thought you successfully Odin mk2?
Sent from my SCH-I545 using Tapatalk
Mistertac said:
No you cannot downgrade past mj7.
I thought you were back on track. What is the actual problem you're having now? Thought you successfully Odin mk2?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
I am trying to flash hyperdrive to eclipse through safestrap. I dislike TouchWiz. but it just wont get past the boot screen. SS verison 3.70. the right module, and the right rom. It wont go past the boot screen. sorry, i ment mj7.
High_Rez said:
I am trying to flash hyperdrive to eclipse through safestrap. I dislike TouchWiz. but it just wont get past the boot screen. SS verison 3.70. the right module, and the right rom. It wont go past the boot screen. sorry, i ment mj7.
Click to expand...
Click to collapse
Well I know it's not this hard lol don't take that the wrong way, probably something your doing. I'd say try another ROM. Unfortunately your not going to get away from tw since your on SafeStrap. If you are trying all this on a ROM slot just try a different one.
Could be any number of things going on here.
Bad download
Not a SS version ROM
Choosing Custom Kernel in Aroma
Plus a couple other things I could be missing since its late lol
Just a reminder :
You can only flash
Touchwiz 4.3 SafeStrap Roms
+ you can only have the stock kernel , no matter if it's an option in a ROM Aroma Setup. Sometimes those Aromas are also made for people like me with MDK S4 with custom recovery.
If you truly want this eclipse ROM you're going to have to find that thread somewhere or on Nitro's site and tell them exactly what steps you took to get you here with as much detail as possible.
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Well I know it's not this hard lol don't take that the wrong way, probably something your doing. I'd say try another ROM. Unfortunately your not going to get away from tw since your on SafeStrap. If you are trying all this on a ROM slot just try a different one.
Could be any number of things going on here.
Bad download
Not a SS version ROM
Choosing Custom Kernel in Aroma
Plus a couple other things I could be missing since its late lol
Just a reminder :
You can only flash
Touchwiz 4.3 SafeStrap Roms
+ you can only have the stock kernel , no matter if it's an option in a ROM Aroma Setup. Sometimes those Aromas are also made for people like me with MDK S4 with custom recovery.
If you truly want this eclipse ROM you're going to have to find that thread somewhere or on Nitro's site and tell them exactly what steps you took to get you here with as much detail as possible.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Iv tried and tried again to reinstall hyperdrive. Hyperdrive 14. Ill see about the things you mentioned. I have not been choosing any custom kernals and iv downloaded SS and hyperdrive Twice and installed them. I have the module and im installing that After the rom.
High_Rez said:
Iv tried and tried again to reinstall hyperdrive. Hyperdrive 14. Ill see about the things you mentioned. I have not been choosing any custom kernals and iv downloaded SS and hyperdrive Twice and installed them. I have the module and im installing that After the rom.
Click to expand...
Click to collapse
And your doing all this on a ROM slot. .... not the stock slot???
Once you create a ROM slot you must activate it... Not just go back and start wiping and installing..
If you truly have your stock slot intact and all this is on a ROM slot then you shouldn't have any problems but my guess is maybe that's what happening.. Forgetting to actually activate the slot.
Sent from my SCH-I545 using Tapatalk
Mistertac said:
And your doing all this on a ROM slot. .... not the stock slot???
Once you create a ROM slot you must activate it... Not just go back and start wiping and installing..
If you truly have your stock slot intact and all this is on a ROM slot then you shouldn't have any problems but my guess is maybe that's what happening.. Forgetting to actually activate the slot.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
My stock slot is intact and im using other slots for it
High_Rez said:
My stock slot is intact and im using other slots for it
Click to expand...
Click to collapse
OK
That's good news then.
Are you downloading these files right to your phone or a computer then transferring to you phone?
I'd always download using the PC.. check the md5 of the download.
Transfer to SD card then check md5 once more to make sure your good.
Then hop in SafeStrap Recovery
- wipe data/factory reset
-wipe vache /Dalvic
* do that a couple times
-flash ROM zip
- don't leave SafeStrap yet
- flash modules
-clear cache/Dalvic once more
I've never had a problem doing it this way and I used to run hyperdrive.
Sent from my SCH-I545 using Tapatalk
---------- Post added at 10:23 PM ---------- Previous post was at 10:20 PM ----------
If by the end of our saga here I've helped you.... Hit the thanks button lol
... we're going to get you up and running!
Sent from my SCH-I545 using Tapatalk
---------- Post added at 10:56 PM ---------- Previous post was at 10:23 PM ----------
High_Rez said:
My stock slot is intact and im using other slots for it
Click to expand...
Click to collapse
Let me know how you're making out... You got me really curious
Sent from my SCH-I545 using Tapatalk
Backstory:
So last night my phone turned off by itself and wouldn't turn back on. My first thought it something with the ROM. So I boot to recovery and start a backup before I try to wipe/format etc. Long story short, it ended up being the battery just ate sh*t. So I got a new battery from Verizon, after I tried to ODIN back to stock though...
Problem:
I was on Hyperdrive RLS15, and I tried to Odin open1your1eyes MDK NoWipe. But my phone is just hanging on the Verizon screen. (it has been over half hr) My phone is MDK base (no safestrap), is that the right thing to flash? Is there anything else I have to do?
Thanks in advance, and forgive my naiveness. :silly:
fadac said:
Backstory:
So last night my phone turned off by itself and wouldn't turn back on. My first thought it something with the ROM. So I boot to recovery and start a backup before I try to wipe/format etc. Long story short, it ended up being the battery just ate sh*t. So I got a new battery from Verizon, after I tried to ODIN back to stock though...
Problem:
I was on Hyperdrive RLS15, and I tried to Odin open1your1eyes MDK NoWipe. But my phone is just hanging on the Verizon screen. (it has been over half hr) My phone is MDK base (no safestrap), is that the right thing to flash? Is there anything else I have to do?
Thanks in advance, and forgive my naiveness. :silly:
Click to expand...
Click to collapse
Try the tar from here
http://forum.xda-developers.com/showthread.php?t=2289325
Some have had better luck with this one
Sent from my SCH-I545 using Tapatalk
Thanks, yes that worked. :good::good:
The name scared me (MKD) until I realized it was just a typo.
EDIT: A mod should really fix that. It's been like that since September even though a MKD never existed.
fadac said:
Thanks, yes that worked. :good::good:
The name scared me (MKD) until I realized it was just a typo.
EDIT: A mod should really fix that. It's been like that since September even though a MKD never existed.
Click to expand...
Click to collapse
Also I include a link to versions of MDK (full-wipe) and MJ7 (full-wipe) I uploaded (that is I didn't mirror them) in the MK2 Odin tar thread.
I see you were successful but ill include my link anyway. Maybe this will help others who read this.
http://www.androidfilehost.com/?fid=23329332407573182
Sent from my SCH-I545 using XDA Premium 4 mobile app
Surge1223 said:
Also I include a link to versions of MDK (full-wipe) and MJ7 (full-wipe) I uploaded (that is I didn't mirror them) in the MK2 Odin tar thread.
I see you were successful but ill include my link anyway. Maybe this will help others who read this.
http://www.androidfilehost.com/?fid=23329332407573182
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So I'm on MDK now with HD RLS15, is there any benefit flashing up to MJ7 or MK2? Do they all require Odin or is there recovery flashables?
Thanks
fadac said:
So I'm on MDK now with HD RLS15, is there any benefit flashing up to MJ7 or MK2? Do they all require Odin or is there recovery flashables?
Thanks
Click to expand...
Click to collapse
NO!
Don't do it. A part of me dies everytime i hear someone intentionally upgraded their S4 from MDK to a newer locked down version.
I
fadac said:
So I'm on MDK now with HD RLS15, is there any benefit flashing up to MJ7 or MK2? Do they all require Odin or is there recovery flashables?
Thanks
Click to expand...
Click to collapse
You're going to want to keep your bootloader MDK. With MDK you an flash any ROM you want, AOSP , AOKP , CM , TW..... 4.3...4.4 you name it.
If you updated to MK2 base you'd take away your options. You'd only be able to flash TW ROMs that are based on whatever build your phone is ...MK2 is 4.3 . And your only recovery would be SafeStrap. Not TWRP or CWM
How did end up with HD15 ? Flashed in recovery right? You can find any number of ROMs on these forums that are based off of MK2 or MJ7 and just flash them in recovery.
Follow me?
Sent from my SCH-I545 using Tapatalk
Mistertac said:
I
You're going to want to keep your bootloader MDK. With MDK you an flash any ROM you want, AOSP , AOKP , CM , TW..... 4.3...4.4 you name it.
If you updated to MK2 base you'd take away your options. You'd only be able to flash TW ROMs that are based on whatever build your phone is ...MK2 is 4.3 . And your only recovery would be SafeStrap. Not TWRP or CWM
How did end up with HD15 ? Flashed in recovery right? You can find any number of ROMs on these forums that are based off of MK2 or MJ7 and just flash them in recovery.
Follow me?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Gotcha. Yes recovery. HD says it's MK2 based, but my phone build still says MDK in the About screen. That's why I was wondering. Come to think of it though, doesn't that just display the Modem version (which is recovery flashable), correct?
fadac said:
Gotcha. Yes recovery. HD says it's MK2 based, but my phone build still says MDK in the About screen. That's why I was wondering. Come to think of it though, doesn't that just display the Modem version (which is recovery flashable), correct?
Click to expand...
Click to collapse
Yes. MDK is your bootloader/Build and MK2 would be your baseband/modem.
Grab this app and it will show you everything https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
And Surge has a thread on here of all our modems which are flashable through recovery although your probably good to stick with MK2 for now.
Sent from my SCH-I545 using Tapatalk
So I flashed the FoxHound ROM (http://forum.xda-developers.com/showthread.php?t=2596654) found there today on my SCH-i545 Verizon Galaxy S4. I flashed it with SafeStrap, and everything works beautifully except for my WI-fi. It absolutely won't turn on no matter what I do. I heard something about a wpa config file, I tried renaming it and rebooting so a new one gets made. There's a Wi-Fi fixing option in the FoxHound settings, but all it does it download files that I have no clue what to do with. I'm very new to this stuff. How do I fix it?
You have to flash the safestrap modules that match your boot loader after you flash the ROM and before you boot. Wi-Fi won't work without them.
If you don't understand go back to the safestrap thread and read the entire OP.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
joshm.1219 said:
You have to flash the safestrap modules that match your boot loader after you flash the ROM and before you boot. Wi-Fi won't work without them.
If you don't understand go back to the safestrap thread and read the entire OP.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I am having the same problem with hyperdrive. Wifi wasnt working on the stock rom either. This is my first time trying custom roms. Could you please give me more info on how to flash the safestrap modules? Nothing was mentioned about it in the thread.
http://forum.xda-developers.com/showthread.php?t=2301724
Thanks for the help!
nwalker77 said:
I am having the same problem with hyperdrive. Wifi wasnt working on the stock rom either. This is my first time trying custom roms. Could you please give me more info on how to flash the safestrap modules? Nothing was mentioned about it in the thread.
http://forum.xda-developers.com/showthread.php?t=2301724
Thanks for the help!
Click to expand...
Click to collapse
It explains this in the SafeStrap thread.
http://forum.xda-developers.com/showthread.php?p=45517751
Like Josh said, you just flash the kernel modules after you flash the ROM before you leave recovery. Match up your modules to whatever your build is , MJ7, MK2 etc...
Sent from my SCH-I545 using Tapatalk
Mistertac said:
It explains this in the SafeStrap thread.
http://forum.xda-developers.com/showthread.php?p=45517751
Like Josh said, you just flash the kernel modules after you flash the ROM before you leave recovery. Match up your modules to whatever your build is , MJ7, MK2 etc...
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Thanks! I cant tell you how much I appreciate your help. I will try it now
---------- Post added at 10:22 PM ---------- Previous post was at 09:55 PM ----------
When flashing, it said no MD5 found. What does that mean, and what should I do?
nwalker77 said:
Thanks! I cant tell you how much I appreciate your help. I will try it now
---------- Post added at 10:22 PM ---------- Previous post was at 09:55 PM ----------
When flashing, it said no MD5 found. What does that mean, and what should I do?
Click to expand...
Click to collapse
Recoveries can check the md5's of whatever files your flashing. It's just a way to see if the file is still in tact and what it's supposed to be... If your on SafeStrap I think there's an option in there to turn off md5 verification under advanced maybe. I check md5's prior to flashing either on my PC or an app on the phone. I don't bother while in recovery. That's just me though
Sent from my SCH-I545 using Tapatalk
Wifi still isnt working after flashing MK2
I've had no luck with Wi-Fi, or a stable Wi-Fi onany of gigilies ROM ports
Sent from my SCH-I545 using Tapatalk