just format the system from recovery, and does not start need help urgent!
someone know I can do?
what the phone do if you push these boutons :
Volume UP + Volume Down + Power . hold 5 sec ?
he boot or do nothing ?
Assuming you have an X912 (VZW CDMA RAZR)?
Download the fastboot files here
Download and install RSD Lite Here
Download and install Moto Drivers here
If you hold all 3 buttons on the side of the phone it should force a reboot and it'll kick you into the moto recovery bootloader. Select AP Fastboot.
For instructions on using RSD use the interwebz. Too much for me to type out.
Flash the recovery file via RSD.
That will return it back to factory (ver .744). You should get an update notification but if you want to pull it you can do that too.
when I try to flash with rds device settings are clean, and gives me error, any help?
cygnus56 said:
when I try to flash with rds device settings are clean, and gives me error, any help?
Click to expand...
Click to collapse
I told you. I'm lazy. Google knows.
http://www.droidforums.net/forum/dr...-using-rsd-lite-flash-sbf-file-correctly.html
thank you very much
cygnus56 said:
when I try to flash with rds device settings are clean, and gives me error, any help?
Click to expand...
Click to collapse
Which mode are you selecting when you boot the phone? Fastboot or something else?
fastboot and show me this https://motorola-global-eng.custhelp.com/rnt/rnw/img/enduser/spdrmain22.png
then start flashing and I get an error because I do not show any value as the imei
http://imageshack.us/photo/my-images/812/rsdlite3.png
in device properties only show me N/A... please i need help, this mobile is new!!!
It's not seeing a USB connection
Sent from my DROID RAZR using xda premium
Do not post questions in development forums
Hi,
I was on last gsmleak ICS :
- Blur_Version.651.167.26.XT910.Retail.en.EU_2
Battery draining too fast so i reboot in recovery and wipe to factory (bad idea) --> phone never boot anymore
Now i can just access to apfastboot and recovery
But i when i try to connect my phone to pc in AP FASTBOOT nothing can be detected on pc so RSD can't work and fla**** with adb same "no device found" ... (i tried another pc same pb, install again drivers no change)
I tried to put the phone on BP SBF FLASH my pc detect and install drivers but rsd can back to APFAST and flash xml
I tried to flash in recovery again the Blur_Version.651.167.26.XT910.Retail.en.EU_2 but there is error when it verify
assert failed ... kindle.apk (freezed with titanium)
ap fast boot info : 0A.74 device is locked Status Code : 0
Battery Ok Ok to program Connect USB Data Cable
So now i have no solution if anyone can help ... maybe another way to flash something or a file to use with recovery ?
t.y
No help
i tried to flash again the last ota, but there is error because i disabled some apps with titanium like kindle.apk
is there a way to flash this ota wo verify check ???
http://forum.xda-developers.com/showthread.php?p=26915046
Follow Post Nr. 6 (T-Mo to Retail)
Sent from my XT910 using Tapatalk 2
I can t my ap fast boot mod seem to be unavailable, pc don t detect the phone when it s connect
So i cant use rds and adb cmd :/
tel is not detect on pc (i tried different pc cable and drivers without success)
So no idea?
gonna send it to sav but i have got doubts :/
same problem here.. no solution still.
No solution i confirm, i send it to an official moto repair but when i read their check i refused to pay for it :
- motherboard replacement
- speaker and screen have to be change
- and flash
= +140€
and i have to pay +27€ to get back my phone
i m gonna send it to another repair we ll see
http://www.youtube.com/watch?v=WBySMO8n1r4
have u tired ths link??
Hello ..
I was following the method given on the cyanogenmod website to unlock the bootloader and then install cm7 ... After i downloaded the files suggested i opened the RSD lite and selected the sbf file and pressed start when my phone rebooted it gave the following error ..
No OS detected, going to RSD mode
in 5 seconds
Press a key to stop countdown
Available modes are:
1. RSD
2. Fastboot
3. NVFlash
4. BP HW Bypass RSD
5. BP HW Bypass QC Dload
6. BP Diag & boot AP
7. BP HW bypass BP only
8. BP SW bypass RSD
9. Andriod Recovery
10 .Boot andriod (No BP)
11. Device UID
12. console=ttyS0,115200n8
13. Early USB Enumeration
14..BP tools
i followed all the instructions clearly but dont know why it happened ... what should i do now .. ?
i am really scared i think i might have bricked my phone :crying: .. please help me out .. Please .. ...
Also i am a big noob .. this was my first time for unlocking a bootloader .. Also i rooted the phone successfully first ..
I found a thread on xda http://forum.xda-developers.com/showthread.php?p=25708728
It says that its a soft brick trying to follow the instructions but it isnt opening this file
Download atrix oem unlock and unzip to moto-fastboot folder
DL here:http://gititbit.ch/pub/unlock.zip
And i cant find the atrix oem unlock anywhere on the internet ....
Kindly please help me out ...
I don't see a problem here. This is perfectly normal. Select fastboot and install custom recovery, then proceed to install ROM of choice. Also next time use search and read existing threads as this has been covered already.
ravilov said:
I don't see a problem here. This is perfectly normal. Select fastboot and install custom recovery, then proceed to install ROM of choice. Also next time use search and read existing threads as this has been covered already.
Click to expand...
Click to collapse
Really sorry for asking but how do i install the custom recovery .. ? .. will go into fast boot while pressing the power on button and the up volume key .. thanks for the reply
zealot92 said:
Really sorry for asking but how do i install the custom recovery .. ? .. will go into fast boot while pressing the power on button and the up volume key .. thanks for the reply
Click to expand...
Click to collapse
You could have found the sticky thread in Atrix General forum:
http://forum.xda-developers.com/showthread.php?t=1302423
And, "oem unlock" is not a file, it's a command of fastboot application.
Thank you
i was able to solve the problem by completing the fast boot procedure ... thanks
hi guys.i have have the customer servise flash tool for m86(pro5).just for m86,not work on any other phones.
and i want to share it yo you.
now just forget the customer servise.
it can falsh roms even if you lost your recovery and fastboot when your bl is locked.just like the Downloading Mode in samsung.
tools download here (Credits go to @Naphtha)
TestPCTool 1.0.0.9.rar
MultiUpgrade 4.8.5.rar
SAMSUNG USB DRIVER
How to Flash the Rom (M86).pdf (if you need some help with this just reply i will answer your question if i have time.) although my english is poor
you may need flyme roms here
[url]http://www.flymeos.com/firmwarelist?modelId=10&type=1[/URL]
enjoy it
nothing has changed
error token signature
i have this programms but they don`t worked... (Token signing fail)
P.S. please help me to flash my phone (i have fastboot mode & root, system running normally)
skype - evgen2910
My PC does not recognize my device when connected via USB , is said to have been a malfunction , I installed the RR rom and can not recognize it.
Please help:crying::crying:
Are there any tools that work for us with locked bootloaders and no recovery?
locked boot and rooted Pro 5
hexxor93 said:
Are there any tools that work for us with locked bootloaders and no recovery?
Click to expand...
Click to collapse
i have same situation
without success always i get error token sign failed WHEN USE MultiUpgrade 4.8.5.
WHO HAVE REAL SOLUTION THIS HAPPEN AFTER UNLOCK PASSWORD WITH MRT Dongle.
The same, i've a Token sign failed.
EDIT : After research, this tool is the bull**** beacause we need to are into Meizu factory. Indeed, to get the right token you need another tool, but only Meizu have it.
Sorry Guys.
EDIT 2 : https://forum.xda-developers.com/meizu-pro-5/how-to/to-unlock-hardbricked-meizu-pro-5-t3566173 Possible Way
Hi Guys, any other solution ? It reports me the same token sigh failed.
- First time when I stucked in Guest Mode (firmware 5.1.6G i thing ) I was able to fix it by this guide from KYOTOX
https://forum.xda-developers.com/meizu-mx/general/guide-meizu-mx5-stuck-guest-mode-fix-t3397191
(after boot to the desktop phone was 5-6 seconds in Admin User than phone switched to the "GUEST MODE", no more recovery mode, locked bootloader, rooted ) it was possible to solve it by that guide
- now I stucked after upgrade to 6.9.7.5 with Android 7 again (propably because I am just beginner without any experiences with flashing etc )
- Problem is before desktop appears, new flyme or Android 7 is showing me stupid commercials on 7 sheets, so during the process of reading sheet , phone switches to the GUEST, so in generally no chance.
Sorry for my english
multimedia box said:
i have same situation
without success always i get error token sign failed WHEN USE MultiUpgrade 4.8.5.
WHO HAVE REAL SOLUTION THIS HAPPEN AFTER UNLOCK PASSWORD WITH MRT Dongle.
Click to expand...
Click to collapse
bl locked rooted and no recovery.i use the flash tool but no luck.tokens failed. i follow this steps.i have the phone in bootloader mode{locked,rooted}
c/adb write
1.fastboot devices
2.fastboot oem unlock
3.close and boot again in bootloader mode.now you have unlocked bootloader
4.download recovery TWRP_3.0_m86 and put it at c/adb and write fastboot flash recovery TWRP_3.0_m86.img
5.close phone and press volume + and close button to reboot recovery.
and thats it. the phone boots twrp recovery!!
mikee72 said:
bl locked rooted and no recovery.i use the flash tool but no luck.tokens failed. i follow this steps.i have the phone in bootloader mode{locked,rooted}
c/adb write
1.fastboot devices
2.fastboot oem unlock
3.close and boot again in bootloader mode.now you have unlocked bootloader
4.download recovery TWRP_3.0_m86 and put it at c/adb and write fastboot flash recovery TWRP_3.0_m86.img
5.close phone and press volume + and close button to reboot recovery.
and thats it. the phone boots twrp recovery!!
Click to expand...
Click to collapse
With what rom previously flashed u've been able to do this ?
1-step
in order to root these qilive devices you will need...
magisk manager apk v5.6.4
stock boot.img file
working ADB to unlock oem and flash
2-step
lets get to it
place the magisk.apk and the stock boot.img
in the internal memory of your phone (downloads)
if you like to keep stuff organized :good:
3-step
follow the vídeo tutorial and use magisk manager
to patch your stock boot.img it will output a new
boot.img that includes magisk Root (patched_boot.img)
https://www.youtube.com/watch?v=BF4_hnKgjFA
ps: major ty to hovatek team for this great tutorial
step-4 use Google drive or usb OTG to get the patched_
boot.img to your PC and place it in the ADB folder
once you have oem(bootloader) unlocked just
rename the patched_boot.img to boot.img
step-5
unlock oem, these qilive devices wont unlock
the bootloader even if you enable it in DEV options
enable USB debug in dev options
you will need to use ADB commands
command- adb devices
serial appears
command- adb reboot bootloader
phone reboots to fastboot mode
command- fastboot devices
serial appears
command- fastboot oem unlock
(MAJOR WARNING the fastboot
oem unlock will wipe/reset/factoryreset/delete your data)
after you give the command small letters will appear
on the phone screen(yes or no) hard to read dont be hasty plz
use VOLUME+ to select and VOLUME - to confirm
note: when my phone ended the unlock it whent back to
that black screen where you choose fastboot-recovery-restart
and was stuck there, side keys did nothing if this happens
just long press the power key for 10 sec it will shutdown
then press power again to turn on
first boot after unlock will take longer then normal dont freakout
after you unlock small letters will appear during boot up saying the device
is not safe unlocked ,you can later use ( fastboot oem lock )
step-6
flash the patched boot.img with ADB
command- adb devices
serial appears
command- adb reboot bootloader
phone reboots to fastboot mode
command- fastboot devices
serial appears
command- fastboot flash boot boot.img
finished/ok
command- fastboot reboot
and voila you should now have magisk
installed in the app drawer, open it!!
step-7 run the install one final time from the
magisk manager and install magisk V16 using
recomended option it will verify/patch the boot image
Do NOT select the AVB 2.0 BOX it will bootloop the phone
and your done, enjoy your qilive rooted phone.
from this point on you can use the fastboot
command- fastboot oem lock
to remove the letters in boot up about the
device not safe unlocked
WARNING oem lock
will WIPE/FACTORY RESET again (god damn it!!)
ps: i had to install twice in a row,major pain in the ....
Repeat step 7 after Wipe/Reset
here is the stock boot for 2 qilive models
you can get the stock firmware for any qilive
at this site www.doc-doapi.com/EM/qilive/smartph...te_3m-fdd-cs_mul_20170818-110645_songlixin_PC
and get the recovery or boot from the unpacked firmware file
ps:my phone is the Q8SIN4GP AND ITS WORKING FINE
A VERY SPECIAL TY to topjohnwu (magisk creator), this man is nothing
short of a God damn genius!! , and if you can donate to him.
hope this helps other qilive users to root:highfive:
quick note on the qilive models, they have two model names
the cliente name in my case Q8SIN4GP
and the factory name in my model its 882912
in order to download the right firmware for your model
you need the factory model witch is what appears in the qilive
site above, it will be in the back of the phone or the original
box on a sticker just bellow the bar code, full model exempl
:Q8SIN4GP/882912 my firmware serves several models,
these Q8 models all start with 88xxxx WARNING
dont try this using the wrong firmware/boot file or you will DAMAGE your phone
Help with BOOTLOOP problems, if you find your self stuck in a bootloop
the phone wont go past the qilive logo and just stays there, dont freak out
you will loose your data but there is a way out
just keep pressing power + Volume up until a black screen with 3 options appears
when it does let go, use Volume + to select option and Volume - to confirm
select Fastboot or alternative select recovery and then select reboot to bootloader
both option will place your phone in Fastboot mode, once in fastboot mode
connect your phone to PC and use ADB commands to fix/bootloop
command- fastboot devices
serial appears
command- fastboot oem unlock (skip this if you use phone unlocked)
a confirm action option appears on the phones screen
use Volume up to say YES / or Volume Down to say NO
Warning oem unlock will WIPE/Factory reset your phone
once it finishes the phone will be stuck on the
Recovery/fastboot/restart screen just long press the power key
until the phone shuts down
start the phone again using Power + Volume up when the black
screen with the 3 options come up, let go and use Volume up to
select Fastboot mode and confirm using Volume Down
Once in fastboot connect your phone to PC and use ADB commands
command- fastboot devices
serial apears
Here you will flash the magisk patched_boot.img
the same image you used to root your phone
command- fastboot flash boot boot.img
it will say finished-ok (or similar)
command- fastboot reboot
the boot up time will be longer than normal
but the phone should now complete the boot
and present the inicial setup screen, select language
enter your mail, the usual bla bla...
any way at this point just repeat step 7
to get root running again
sp flash tools v5.1716.
phonedriller said:
1-step
in order to root these qilive devices you will need...
magisk manager apk v5.6.4
stock boot.img file
working ADB to unlock oem and flash
2-step....
Click to expand...
Click to collapse
Hi phonedriller,
phew, I did it! (Q8S55IN4G2), thanks.
Next step: Have you found a compatible custom recovery? (especially for nandroid backups and for xposed installation)
Would be very thankful for your help!
thanks
xdatheresianum
xdacktheresianum said:
Hi phonedriller,
phew, I did it! (Q8S55IN4G2), thanks.
Next step: Have you found a compatible custom recovery? (especially for nandroid backups and for xposed installation)
Would be very thankful for your help!
thanks
xdatheresianum
Click to expand...
Click to collapse
Awsome work congrats, as for the recovery so far no luck so try not to go 2 crazy until a working recovery is up and working , install stericsons busy box this is always the first root app i install
If possible buy sterics busybox pro and titaniumbackup pro if you want to install apps to sd card apps2sd pro all of these can be tested in free
Version,again nice work congrats enjoy you rooted phone :highfive:
xdacktheresianum said:
Hi phonedriller,
phew, I did it! (Q8S55IN4G2), thanks.
Next step: Have you found a compatible custom recovery? (especially for nandroid backups and for xposed installation)
Would be very thankful for your help!
thanks
xdatheresianum
Click to expand...
Click to collapse
give a hungry man fish and you solve his problem for a day or two
teach him how to fish and you solve his problem for life
phonedriller said:
give a hungry man fish and you solve his problem for a day or two
teach him how to fish and you solve his problem for life
Click to expand...
Click to collapse
hi phonedriller,
...well, i must have been an unlucky fisherman
an app i installed ended up giving me a soft brick (bootloop between qilive icon opening screen - btw still with the "warning" of "device is unsafe etc", i.e. oem still open - and black screen, qilive opening screen etcetcetc)
have cleaned cache; went for factory reset; etc
BUT: am presently stuck when trying to go via ADB (which used to work perfectly before) that somehow the usb drivers don't want to get installed properly. as a consequence, desktop cannot see devices.
and i cannot, for the sake of me, remember how i had succeeded before installing usb drivers.
could you please help?
thx
cktheresianum
xdacktheresianum said:
hi phonedriller,
...well, i must have been an unlucky fisherman
an app i installed ended up giving me a soft brick (bootloop between qilive icon opening screen - btw still with the "warning" of "device is unsafe etc", i.e. oem still open - and black screen, qilive opening screen etcetcetc)
have cleaned cache; went for factory reset; etc
BUT: am presently stuck when trying to go via ADB (which used to work perfectly before) that somehow the usb drivers don't want to get installed properly. as a consequence, desktop cannot see devices.
and i cannot, for the sake of me, remember how i had succeeded before installing usb drivers.
could you please help?
thx
cktheresianum
Click to expand...
Click to collapse
PS: adb will not work if the phone is not booting to the OS
it will work if you manualy place the phone in fastboot AKA bootloader
MODE ,you see if it does not boot to OS then usb service is not working
use power + Volume up to enter the black menu
use the Volume up to select fastboot(bootloader) volume - to confirm
connect the phone to your PC
flash the boot.img, the same boot.img used to root (patched by magisk)
to see is adb is ok just run - fastboot devices
if a serial is presented then all other stuff should work
step 1 - reflash the boot img
step 2 - after the flash finishes - fastboot oem lock
message on the phone screen, confirm yes to lock
OEM
step 3- press power until it turns off
it should now complete the start up (boot)
if not working this method let me now
you can still flash the full factory firmware
using SP Flash Tool v5.17xx
phonedriller said:
PS: adb will not work if the phone is not booting to the OS
it will work if you manualy place the phone in fastboot AKA bootloader
MODE ,you see if it does not boot to OS then usb service is not working
use power + Volume up to enter the black menu
use the Volume up to select fastboot(bootloader) volume - to confirm
connect the phone to your PC
flash the boot.img, the same boot.img used to root (patched by magisk)
to see is adb is ok just run - fastboot devices
if a serial is presented then all other stuff should work
step 1 - reflash the boot img
step 2 - after the flash finishes - fastboot oem lock
message on the phone screen, confirm yes to lock
OEM
step 3- press power until it turns off
it should now complete the start up (boot)
if not working this method let me now
you can still flash the full factory firmware
using SP Flash Tool v5.17xx
Click to expand...
Click to collapse
dearphonedriller,
thank you so much for your speedy help.
followed the steps given by you. all is well, as you predicted, until step 3.
however:
phone (now without the "orange state" message, i.e. oem locked) still bootloops and short of ADB "fastboot devices" the desktop doesn't see the phone (and driver installation continues to fail), as per your PS (thanks!) i guess flashing the full factory firmware ("RC-mt6737...zip" quoted by you in your very first post) is next.
would you please point me to a basic-for-noobs tutorial or instruct me on the step-by-step commands/procedures using this zip file?!
HUGE thanks
ckth
xdacktheresianum said:
dearphonedriller,
thank you so much for your speedy help.
followed the steps given by you. all is well, as you predicted, until step 3.
however:
phone (now without the "orange state" message, i.e. oem locked) still bootloops and short of ADB "fastboot devices" the desktop doesn't see the phone (and driver installation continues to fail), as per your PS (thanks!) i guess flashing the full factory firmware ("RC-mt6737...zip" quoted by you in your very first post) is next.
would you please point me to a basic-for-noobs tutorial or instruct me on the step-by-step commands/procedures using this zip file?!
HUGE thanks
ckth
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=-zaEmj3-prU
turn the phone off, follow the video
flashing the full firmware is actualy easy
https://forum.hovatek.com/thread-13970.html
or searh sp flash tool here on xda
https://www.youtube.com/watch?v=LzyYXAflmOk&t=125s
phonedriller said:
https://www.youtube.com/watch?v=-zaEmj3-prU
turn the phone off, follow the video
flashing the full firmware is actualy easy
https://forum.hovatek.com/thread-13970.html
or searh sp flash tool here on xda
https://www.youtube.com/watch?v=LzyYXAflmOk&t=125s
Click to expand...
Click to collapse
thank you, phonedriller
everything worked perfectly via SPFlash Tool.
and, referring back to our above questions re the possibility of getting TWRP onto the phones, a developer friend of mine writes me this:
>try to flash TWRP:
>Download following files from this link:
>https://mega.nz/#F!qZIgnJRK!5apBfYo1je0ytg-wmA6JMQ
>- Odin3 v3.12.3 (Complete folder)
>- twrp-3.2.1-0-Q8S55IN4G2-20180318.tar
>1. Start your Phone into download mode
>2. Start Odin (Odin3 v3.12.3\Odin3.exe)
>3. Click on Options and unmark Auto Reboot
>4. Click AP and select twrp-3.2.1-0-Q8S55IN4G2-20180318.tar
>5. Press Start and wait until finished (Reset or OK!)
>6. Restart your phone immediatly to recovery mode
>7. In TWRP Recovery click on mount
>8. Set the checkbox checked at system (that system is mounted)
>9. go back and click on advanced
>10. Open file manager
>11. navigate to system/build.prop and click on build.prop
>12. Click on chmod
>13. type: 0644 and hit the accept button on screen or at the virtual
>keyboard on your phone
>14. restart your phone
i haven't tried this, but am wondering whether it might seem "reasonably possible" when reading through it.
thanks
ckth
Do you perhaps have link to Q8S5IN4GP stock rorm? Mine came with malware installed on it. I want to see if those were chinese who preinstalled or or was it decided by Auchan.
tommo1982 said:
Do you perhaps have link to Q8S5IN4GP stock rorm? Mine came with malware installed on it. I want to see if those were chinese who preinstalled or or was it decided by Auchan.
Click to expand...
Click to collapse
On my phone it came from factory and on the firmware file on 2 models , however only kasperky complains about malware on an system app called Helper bla bla bla i think its a false positive(i think) as no other antivirus or playstore ever found anything,but hey better investigate and be safe then sry right :good: maybe a ported cyanogen rom, ive look at a few rom port tutorials but my knowhow is limited + dont even have a working twrp yet, avg/avast/malwarebytes and a few others ,only kaspersky detects malware.
phonedriller said:
On my phone it came from factory and on the firmware file on 2 models , however only kasperky complains about malware on an system app called Helper bla bla bla i think its a false positive(i think) as no other antivirus or playstore ever found anything,but hey better investigate and be safe then sry right :good: maybe a ported cyanogen rom, ive look at a few rom port tutorials but my knowhow is limited + dont even have a working twrp yet, avg/avast/malwarebytes and a few others ,only kaspersky detects malware.
Click to expand...
Click to collapse
I had issues with adds being displayed at home screen and I was not able to close them. I had to use NetGuard to find that FOTA talks to 'adsup' and it is a known malware provider. I learned that some of the system apps try to talk with Alibaba servers and AdOppo (whatever it's called). Kaspersky might not be wrong, actually.
I'm trying to download stock firmware, but I don't know the file name. The website with it is locked, so unless I know exactly what I need, I cannot download it.
phonedriller said:
On my phone it came from factory and on the firmware file on 2 models , however only kasperky complains about malware on an system app called Helper bla bla bla i think its a false positive(i think) as no other antivirus or playstore ever found anything,but hey better investigate and be safe then sry right :good: maybe a ported cyanogen rom, ive look at a few rom port tutorials but my knowhow is limited + dont even have a working twrp yet, avg/avast/malwarebytes and a few others ,only kaspersky detects malware.
Click to expand...
Click to collapse
Yes i noticed the site now asks for a login that i dont have,but it was open to all until recently i have the firmware file in my pc,a few days ago i went to check for firware updates and the site was diferent and closed , in the site the download link was 882912/****** this firmware services at least 3 similar models
phonedriller said:
Yes i noticed the site now asks for a login that i dont have,but it was open to all until recently i have the firmware file in my pc,a few days ago i went to check for firware updates and the site was diferent and closed , in the site the download link was 882912/****** this firmware services at least 3 similar models
Click to expand...
Click to collapse
I guess the best thing would be a lineage or cyanogen ported rom(clean),ps i flashed the phone 2 times because of popups/adds and battery drain,however im aware that having root and installing tones of crasy stuff can fu.. Up any phone cheap or flagship,thus the firmware flashes,i discovered that having malwarebytes(premium)free for 30days keeps the phone clean and working fine,it seems that one is forced to buy from a main stream brand or risk this kind of thing,little to no support,no updates at all,bad security,the problem is certain apps if removed resoult in boot loop like this Helper app
phonedriller said:
I guess the best thing would be a lineage or cyanogen ported rom(clean),ps i flashed the phone 2 times because of popups/adds and battery drain,however im aware that having root and installing tones of crasy stuff can fu.. Up any phone cheap or flagship,thus the firmware flashes,i discovered that having malwarebytes(premium)free for 30days keeps the phone clean and working fine,it seems that one is forced to buy from a main stream brand or risk this kind of thing,little to no support,no updates at all,bad security,the problem is certain apps if removed resoult in boot loop like this Helper app
Click to expand...
Click to collapse
Ps use root + apps2sd or titaniumbackup to stop/disable the bad apps and replace them with playS app,not possible on all apps of course
phonedriller said:
I guess the best thing would be a lineage or cyanogen ported rom(clean),ps i flashed the phone 2 times because of popups/adds and battery drain,however im aware that having root and installing tones of crasy stuff can fu.. Up any phone cheap or flagship,thus the firmware flashes,i discovered that having malwarebytes(premium)free for 30days keeps the phone clean and working fine,it seems that one is forced to buy from a main stream brand or risk this kind of thing,little to no support,no updates at all,bad security,the problem is certain apps if removed resoult in boot loop like this Helper app
Click to expand...
Click to collapse
I'm thinking about Android 8.1 with it's Treble project. I might not be knowledgable enought to compile and flash it, though.
tommo1982 said:
I'm thinking about Android 8.1 with it's Treble project. I might not be knowledgable enought to compile and flash it, though.
Click to expand...
Click to collapse
Flashing is super easy use spflashtools or. Odin compiling a Rom is not , were you able to get the original firmware? You will need the original firware to get the boot and partition info from what i read so far
Unfortunately not. I will ask at the shop where I bought it how to contact tech. It should be freely available. I don't understand why Qilive restricted access to firmware.
I'll post when I learn anything.
Well, you can download the firmware if you know the file name. The bad news is, it seems the stock firmware has malware preinstalled. If there is anyone who could help confirm it. I have the ROM, and I can upload it to Google Drive if needed.
Hi all,
I'm coming back to a question lingering since the very first post here and mentioned again in post #9:
Is there a successful way to install TWRP on this Qilive model?
Re this topic:
- has anybody tried/has anybody been successful with the procedure described in post #9?
and
- has anybody seen the following TWRP builders' version (do an in-page search on Q8S55IN4G2)
https://twrpbuilder.github.io/fr/downloads/twrp/
with the download belonging to it
https://androidfilehost.com/?fid=890129502657591798
???
any successful installations to report???
Wouldn't THAT be great!!??
thanks
xdack