Hello. This is my first time asking a question in Xda-Developers. I have a bricked Machspeed Trio Stealth Pro 9.7 Tablet. It happened right after I flash the recovery to CWMod. Now the screen turns on but there is no image on it. I have been looking for a way to fix this. I have tried flashing the recovery again using ADB USB, but I must be doing something wrong or using the wrong files. I also tried livesuit flashing tool, but no results so far. Has anyone found an img file to flash this tablet? I was able to find a rom zip which is posted here :
http://forum.xda-developers.com/showthread.php?t=2296921, but i have no way to use the recovery because the there is no screen output. Could anyone convert this zip file into a livesuit image for me. Maybe that could work. Any advice will be really appreciated. Thanks a lot.
Related
Sal all,
I cannot find firmware for this tablet. It's a 7inch, dual camera, atm7029 quad core cpu, that doesn't start, but i can write firmware with Actions Pad Product Tool.
The only available firmwares for this type of cpu (atm7029) i was able to find, were from Ainol tablets, but these are not good.(only lights start 1sec)
Can someone help ?
10x in advance !
Hi! There is a similar device firmware from (Russian): (yadi.sk/d/Wku6HWTxKkaKa)
But WiFi and camera other.
System image
Here is the image of the system partition. Dumped with ADB from a working tablet. (512MB)
(mediafire.com/download/roc8870rirvt3hw/actc_system.img)
And this is the image of the recovery partition: (48MB)
(mediafire.com/download/fd30kaio8xb490j/acta_recovery.img)
If you want to see what's inside the images, mount the image in Linux, or use Linux Reader if you're using Windows.
How to use the actc_system.img and acta_recovery.img
Hi, I'm an android newbie needing help. I found this thread while searching for how to deal with a bootlooping Orion TAB-700qc tablet belonging to a friend.
Apparently my friend tried to update the tablet with the wrong update (I'm not really sure what he did), but it went into a bootloop -- it will not get past the "android" screen. I found how to go into the Recovery menu but nothing there would fix the problem. I have downloaded the actc_system.img and acta_recovery.img discussed in this thread, but I need step-by-step instructions for how to use them to get the tablet working again.
Can someone please direct me to instructions that I as a newbie will understand? I have worked a lot with pc's but I have almost no experience with androids.
Thanks,
cmNhu
At first guys, excuse me if the topic isnt at right place but i cant find the right section.
So i have a Prestigio Multipad 8.0 HD (PMP5588C).I think i have bricked it.I erased NAND with Amlogic Image Burning Tool and now the device wont boot.The screen is black even when im charging it.I wont boot at all.I tried to boot in recovery but no succsess.Ive tried to boot it normally and in recovery (even when i charged it 10 hours usually it charges for 4 hours) but the screen is black.When i connect it with Power and Vol- buttons it shows up in the device manager as M6-CHIP and ive installed the drivers so now is World Cup Device.Ive tried to use Amlogic Image Burning Tool again but it fails on load spl.Any ideas?
Thanks in advance!
Best regards, Stoio.
Im sorry for my English but im from Bulgaria.
Unbrick amlogic tablets
Hello stoio
I have almost the same Tablet. It's a Prestigio PMP5580C, for me it is labeld as Intenso Tab 814, but they are completely the same. I have tried to find the u-boot.bin in the stock firmware, but I didn't sucess yet. I've downloaded several tools which allows me to make my 16 GB MicroSD card recognized as a 512 MB SD card, there I have to put the files on it to unbrick my tablet, it's amlogic (like my username) (someone told me that this is the chipset). It has a TOSHIBA TC58TEG6DCJTA00 NAND flash chip of 8 GB capazity. I also need help by getting my tablet unbricked.
In the future Inwant to learn with this amlogic based tablet how to create custom ROM's, recoveries and custom boot splash screens.
Thanks for any help, I reall appreciate your help,
Please note that I'm from Germany and my English is not good as it should used to be, but I have a dictionary (as a normal book) where I can get good communication with you. I like the idea of using english only.
Every Image (.img) were made with the dd command, I need to look inside in the images and open the content, I used a hex editor and tried to strip off the 2k of data, but I can't success. I'm using this tutorial:
I'm using this hex editor under linux: Okteta
I don't know how to delete the 2k of data. I need to know what content the partitions have to unbrick my amlogic based tablet, cause I'm seeing still the white android robot, and the charging battery or charged plugin picture, but this tablet doesn't have a bootloader or recovery so I'm out of ideas, the only way for me is to use a microsd card like an live cd to automatically let this tablet flash stock firmware, but where is it? Please help me out, I meight be wrong, it's possible that different repairing ways exist, too.
i bricked my acer b1 a71 trying to install twrp. after flashing it successfully and went to reboot . it just showed ther acer logo then blank screen. i tried going to recovery but was just able to go to the first part where you have three choices sd image update mode flashboot mode and clean boot. i tried all three and just acer logo then blank screen. tried the reset pin on the side but still nothing. i read and study all tutorials there is and it all boils down to having a stock rom. now i"ve searched and searched the entire net and i was able to get two stock roms but i dont know if it is okay or not because when i use the scatter file on sp flash tools it says scatter file error or format error i tried to rename it but till error. i used every version of sp flash tools and still scatter file error. so i dont know if those roms are legit or not. also my laptop is 64 bit. i read somewhere that mtk6577 is not supported by 64 bit. the mtk on the specs of acer is mtk8317t but it is also recognized as mtk6577 and that is also what mtk droid tools showed. can anybody please help me here. i know xda has helped a lot of peole and im hoping that i can be also one of them. thanks a lot in advance.
Hi everyone,
I managed to brick my Cube T8 Plus trying to root it. Now it is no longer recognised by Windows, does not turn on does not get into recovery. Any hope?
So desperate for some help here...:crying:
This is my problem too. I even can not find rom for it . i got it last week and i am sure it was 20160225 virsion.
Same problem here.
Recovery is working but it is not recognized by the pc (windows 10).
I tried to transfer a file by using a SD card but it does not appear on the recovery (install zip metod).
Try the SP flash tool.
its seems to be crashing on my PC.
any suggestions ?
You can download the file T8-PLUS_V1.0_20160218. use google to find and download it.
it contains the SP flash tool and a list.
tell me if you succeeded.
i didnt
Also same problem
I think I made a misstake and formated my whole Cube T8plus.
So I wonder if someone have a backup to share that I can try to use for recovery?
Hi. I have a Lenovo Tab 4 8 inch tablet (TB-8704F). I rooted the tablet and in the process of trying to get rid of the Wifi feature I tried deleting the file wlan.ko from /system/lib/modules. Now the tablet refuses to start and it's not detected by my computer. I assume it's soft or hard bricked. Anyone could help to re-soft it or something like that?
Any luck yet ?
Any luck yet? Can you get the device in Fastboot mode ? In case you need IMG files: Using the brilliant YouTube tutorial from RootJunky on 'How to pull your own stock Android firmware from your device', I have pulled BOOT.IMG, SYSTEM.IMG and RECOVERY.IMG from my device, TB-8704F - Android 8.1.0.