Related
Not sure what the CM updater uses, but I have tried to update with Philz, got stuck in an installation loop of the update itself.
Tried to use my jig and flash back to stock right now, got into download mode and was able to flash back to stock, but right now, I got into download with the jig, flashed stock ROM, and got a bootloop but am UNABLE to get into any recovery at all.
Pretty screwed up. Really need some suggestions here, guys.
Any ideas?!
I can get into download mode and flash via Odin (USB drivers installed via Windows 8)
Flashes successfully, installs stock recovery, reboots into bootloop.
No idea how to fix it.
Not a noob here. Nothing is working.
Any suggestions would be greatly appreciated.
I had the same problem and I ended up finding a working CWM tar file that can be installed using ODIN and I was then able to boot into CWM fine.
This is the exact file name: recovery-cwmtouch-6.0.2.7-GTI9300
I don't remember where I downloaded it from, but if you Google the exact file name I am pretty sure you'll find it. Just flash it using Odin and you'll be good to go.
TarekElsakka said:
I had the same problem and I ended up finding a working CWM tar file that can be installed using ODIN and I was then able to boot into CWM fine.
This is the exact file name: recovery-cwmtouch-6.0.2.7-GTI9300
I don't remember where I downloaded it from, but if you Google the exact file name I am pretty sure you'll find it. Just flash it using Odin and you'll be good to go.
Click to expand...
Click to collapse
Well, now I'm even more f****ed than before, because I had a zero count, but after trying this, I got a custom count in download, and I still cannot get into recovery.
Nothing works.
Bye, bye warranty.
Edit:
The 6.0.2.7 version by MSKIP worked, but the updated one did not.
I got recovery, now I'll see if I can flash stock and recovery to get my counter back to zero.
Sorry to hear about the counter. I'd suggest rooting your device, installing Triangle Away, resetting your flash counter and then finally unrooting your device by installing stock ROM from SamMobile or such. That's the best route if you want your warranty to remain intact.
TarekElsakka said:
Sorry to hear about the counter. I'd suggest rooting your device, installing Triangle Away, resetting your flash counter and then finally unrooting your device by installing stock ROM from SamMobile or such. That's the best route if you want your warranty to remain intact.
Click to expand...
Click to collapse
He probably needs a booting phone first.
But like he said, he's not a noob. He knows all that
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
He probably needs a booting phone first.
But like he said, he's not a noob. He knows all that
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Hi all,
I am stuck in the very same problem as of today!
I don't know what to do!
One more weird symptom is that when I tried to charge the Note battery..it suddenly went to bootloop again!
The battery was 100% at the begining of that damn update process!
I don't know what to do..all suggestions are so welcomed.
Iceberg707 said:
Hi all,
I am stuck in the very same problem as of today!
I don't know what to do!
One more weird symptom is that when I tried to charge the Note battery..it suddenly went to bootloop again!
The battery was 100% at the begining of that damn update process!
I don't know what to do..all suggestions are so welcomed.
Click to expand...
Click to collapse
If you have a Note, then advice we give here may not be relevant and may be unsafe.
I had no success with roms (im new to all of this, but i was able to root) and already unrooted.. I just want to clean my phone up for good. I tried installing the 4.3 OTA update and got an error most likely thanks to some safestrap crap still on my phone.
I also tried this..http://forum.xda-developers.com/showthread.php?t=2301259 but the zip file for the MI1 build is corrupt or empty or whatever but it wont work...
So I dont care if i lose data at this point, i just want to go back to stock and be able to get the 4.3 OTA update. Please help!
also, I already have odin v3.07 on my computer.
DITTO!!
Dekdo said:
I had no success with roms (im new to all of this, but i was able to root) and already unrooted.. I just want to clean my phone up for good. I tried installing the 4.3 OTA update and got an error most likely thanks to some safestrap crap still on my phone.
I also tried this..http://forum.xda-developers.com/showthread.php?t=2301259 but the zip file for the MI1 build is corrupt or empty or whatever but it wont work...
So I dont care if i lose data at this point, i just want to go back to stock and be able to get the 4.3 OTA update. Please help!
also, I already have odin v3.07 on my computer.
Click to expand...
Click to collapse
Im WITH YOU ON THIS.. I need to know everything, step by step. This 4.3 update crap is the DEVIL!!!
The method you are using is an issue or the browser you are using to download is creating an issue.
I downloaded the file in that link and did not have an issue.
Dekdo said:
I had no success with roms (im new to all of this, but i was able to root) and already unrooted.. I just want to clean my phone up for good. I tried installing the 4.3 OTA update and got an error most likely thanks to some safestrap crap still on my phone.
I also tried this..http://forum.xda-developers.com/showthread.php?t=2301259 but the zip file for the MI1 build is corrupt or empty or whatever but it wont work...
So I dont care if i lose data at this point, i just want to go back to stock and be able to get the 4.3 OTA update. Please help!
also, I already have odin v3.07 on my computer.
Click to expand...
Click to collapse
If that's not working for you, then you need to retry the download. If it continues to be corrupt, then you need to try a better network.
I've sent people to Panera and Starbucks to fix problems they're having with getting good downloads.
The only other reason for the download from that thread to fail is when you're not on a MI1 build when you start. You can't flash MI1 on anything later.
ok so got the download to work..
started the flash and then it read "FAIL" and my phone was stuck downloading and now its stuck in emergency mode even after pulling the battery. I cant boot to anything else. HELP
Dekdo said:
ok so got the download to work..
started the flash and then it read "FAIL" and my phone was stuck downloading and now its stuck in emergency mode even after pulling the battery. I cant boot to anything else. HELP
Click to expand...
Click to collapse
Have any updates? Were you able to fix the issue? Im kinda in the same situation.
Dekdo said:
ok so got the download to work..
started the flash and then it read "FAIL" and my phone was stuck downloading and now its stuck in emergency mode even after pulling the battery. I cant boot to anything else. HELP
Click to expand...
Click to collapse
You flashed the wrong software for your phone, and must find an image that matches your phone or use the recovery assistant to repair it.
You can't go backwards. I.e. flashing MDK on a ME2 phone.
You can't install custom recovery other than on MDK.
So, this all started last year when i wanted to disable updates. For the life of me, i cant remember what i did but there have been no updates. Recently, I have been getting the OTA notification to update. So i did that and when it installs it gives an error at 26%. My phone is rooted and has USB debugging on so i put it in download mode and tried to use ODIN to update it with both the stock firmware and KitKat. they both failed. Today, I tried to do it again but added the file to BL instead of AP in ODIN. Now my phone gives the "Firmware upgrade encountered an issue" screen. I tried to use Kies to fix it but it doesnt connect when this screen is up. When i restart the phone in download mode, then my computer detects the device.
I have a ATT gs4 model SGH-I337
Please HELP!
tbsrules2 said:
So, this all started last year when i wanted to disable updates. For the life of me, i cant remember what i did but there have been no updates. Recently, I have been getting the OTA notification to update. So i did that and when it installs it gives an error at 26%. My phone is rooted and has USB debugging on so i put it in download mode and tried to use ODIN to update it with both the stock firmware and KitKat. they both failed. Today, I tried to do it again but added the file to BL instead of AP in ODIN. Now my phone gives the "Firmware upgrade encountered an issue" screen. I tried to use Kies to fix it but it doesnt connect when this screen is up. When i restart the phone in download mode, then my computer detects the device.
I have a ATT gs4 model SGH-I337
Please HELP!
Click to expand...
Click to collapse
flash a stock rom and then fastboot flash your stock recovery, then update your phone the update should be triggered in the stock recovery,with a custom recovery, it won't work
the only other easy way around this besides doing what I said is to look for a firmware thread for your device and flash the firmware as a op who has tested it states.
toolhas4degrees said:
flash a stock rom and then fastboot flash your stock recovery, then update your phone the update should be triggered in the stock recovery,with a custom recovery, it won't work
Click to expand...
Click to collapse
Thank you so much for your help! When i try to do this, i get an error. I received this error before as well when trying do this with both the update and the one that came stock. Please see attached image.
tbsrules2 said:
Thank you so much for your help! When i try to do this, i get an error. I received this error before as well when trying do this with both the update and the one that came stock. Please see attached image.
Click to expand...
Click to collapse
try this http://www.androidrootz.com/p/galaxy-s4-stock-firmwares.html
then use your previous unlock/root method after upgrading
toolhas4degrees said:
try this http://www.androidrootz.com/p/galaxy-s4-stock-firmwares.html
then use your previous unlock/root method after upgrading
Click to expand...
Click to collapse
So i did that but still got an error. I think that one of the reasons why it was messing up before is an issue with Kies blocking the port from opening. So i closed that out per the below thread.
http://forum.xda-developers.com/showthread.php?t=1622790
But it started and the status bar on my phone is now blue (which is what how this bigger issue started before) I found this other link that kind of fits whats going on. Should i just follow the PIT instructions from here and of course just restart my phone again?
http://www.droidviews.com/how-to-unbrick-your-bricked-samsung-galaxy-s4-gt-i9500-gt-i9505/
tbsrules2 said:
So i did that but still got an error. I think that one of the reasons why it was messing up before is an issue with Kies blocking the port from opening. So i closed that out per the below thread.
http://forum.xda-developers.com/showthread.php?t=1622790
But it started and the status bar on my phone is now blue (which is what how this bigger issue started before) I found this other link that kind of fits whats going on. Should i just follow the PIT instructions from here and of course just restart my phone again?
http://www.droidviews.com/how-to-unbrick-your-bricked-samsung-galaxy-s4-gt-i9500-gt-i9505/
Click to expand...
Click to collapse
I think you may want to pm the developer of kies to solve your issue, since I don't have your device, that's about as much help as I can be.
toolhas4degrees said:
I think you may want to pm the developer of kies to solve your issue, since I don't have your device, that's about as much help as I can be.
Click to expand...
Click to collapse
UPDATE: so my phone is actually booting now since i re-partitioned it. As i am trying to update to the latest firmware i am still getting an error.
What update were you on before you started? And there's a newer update or 2 past NB1 now.
Sent from my One using XDA Premium 4 mobile app
es0tericcha0s said:
What update were you on before you started? And there's a newer update or 2 past NB1 now.
Sent from my One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Im pretty sure i was at 4.3. So everything was working and then i found a random article saying that with the ALL_ATT_I337UCUFNB1_I337ATTFNB1_505595_REV06_user_low_ship_MULTI_CERT.tar.md5 update, you have to put in the PIT file again. So i did that and now my phone turns on and says custom, but then shuts off. I can go into download mode and recovery. I tried to factory reset everything but to no avail.
tbsrules2 said:
Im pretty sure i was at 4.3. So everything was working and then i found a random article saying that with the ALL_ATT_I337UCUFNB1_I337ATTFNB1_505595_REV06_user_low_ship_MULTI_CERT.tar.md5 update, you have to put in the PIT file again. So i did that and now my phone turns on and says custom, but then shuts off. I can go into download mode and recovery. I tried to factory reset everything but to no avail.
Click to expand...
Click to collapse
Hmm, the pit might be why you're having issues. Most updates don't need the separate pit file. If it's needed, it's often packaged in the main tar file. I would just redo the Odin flash without pit and factory reset afterwards.
es0tericcha0s said:
Hmm, the pit might be why you're having issues. Most updates don't need the separate pit file. If it's needed, it's often packaged in the main tar file. I would just redo the Odin flash without pit and factory reset afterwards.
Click to expand...
Click to collapse
When i try to do this, it says "Fail" is there a way that I can contact you directly?
Ill give whoever helps me with this $10 tonight via paypal
tbsrules2 said:
When i try to do this, it says "Fail" is there a way that I can contact you directly?
Ill give whoever helps me with this $10 tonight via paypal
Click to expand...
Click to collapse
What step does it fail at?
My contact info is in my signature.
es0tericcha0s said:
What step does it fail at?
My contact info is in my signature.
Click to expand...
Click to collapse
I private messaged you
Hey guys,
I'm trying to flash a brazilian firmware in my G925i thru ODIN, but the process stucks in NAND WRITE and nothing happen.
Someone knows what can I do?
I've heard somewhere that this is a hard brick
Sent from my Nexus 9 using XDA Free mobile app
Dudmaster said:
I've heard somewhere that this is a hard brick
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
What kind of brick?
rafaelpinaf said:
Hey guys,
I'm trying to flash a brazilian firmware in my G925i thru ODIN, but the process stucks in NAND WRITE and nothing happen.
Someone knows what can I do?
Click to expand...
Click to collapse
Hey there, I had a similar problem, what I did was re-install the Samsung drivers and reboot the computer also I turned off my lock screen and activation on the phone. Between the two of those things it allowed ODIN to have success.
androidvergen said:
Hey there, I had a similar problem, what I did was re-install the Samsung drivers and reboot the computer also I turned off my lock screen and activation on the phone. Between the two of those things it allowed ODIN to have success.
Click to expand...
Click to collapse
Even you have to put the phone in Download mode?
Edit: I tried the same and it still does not work :/
I tried again, but this time I ran the Odin as administrator. I passed thru NAND Write but in the end of all process it says FAIL and brick my phone.
I am trying to flash this file: G925IDVU1AOD1_G925IZTO1AOD1_G925IDVU1AOD1_HOME.tar.md5
You can see the issue attached:
you fail because you need a pit file..I can flash my normal firmware without a problem..but if I try a other one for example a provider one..it fails..for that we need the pit..and for that we need root..to extract it from the phone..and I don't won't to root ATM..
So how can I fix the device?
I tryng to use the Smart Switch PC but my device does not appear in the list to recovery emergency
I reinstalled the usb driver..
rafaelpinaf said:
So how can I fix the device?
I tryng to use the Smart Switch PC but my device does not appear in the list to recovery emergency
I reinstalled the usb driver..
Click to expand...
Click to collapse
you just need the version as firmware...you had before on the phone..this should flash
Alex-V said:
you just need the version as firmware...you had before on the phone..this should flash
Click to expand...
Click to collapse
I dont remember the older version, or the original version that was in my phone. It is stuck in Warning screen
rafaelpinaf said:
I dont remember the older version, or the original version that was in my phone. It is stuck in Warning screen
Click to expand...
Click to collapse
warning screen is no problem..it's still the download mode..but you need to know the firmware..may try to reboot both.. phone get into the warning mode again..to ensure good connection and retry smart switch
rafaelpinaf said:
I tried again, but this time I ran the Odin as administrator. I passed thru NAND Write but in the end of all process it says FAIL and brick my phone.
I am trying to flash this file: G925IDVU1AOD1_G925IZTO1AOD1_G925IDVU1AOD1_HOME.tar.md5
You can see the issue attached:
Click to expand...
Click to collapse
I've had this problem before, are you planning on rooting as well?
tiboric said:
I've had this problem before, are you planning on rooting as well?
Click to expand...
Click to collapse
No, I just want to change the firmware version because the version that came with the phone does not have Portuguese as all language. The revice was 100% stock, just tried to flash another country firmware thru Odin and it has been bricked.
rafaelpinaf said:
No, I just want to change the firmware version because the version that came with the phone does not have Portuguese as all language. The revice was 100% stock, just tried to flash another country firmware thru Odin and it has been bricked.
Click to expand...
Click to collapse
O.k the only way I know around this without finding your original firmware and flashing that, is to:
flash the firmware again, and wait until it fails again,
then hold vol down + power + home to get it to restart in to download mode again but keep odin open,
then flash CF autoroot .
then wait for the phone to reboot and it will install root then it will restart two more times on it own then should boot into the O.S.
(i take no responsibility if you mess up you device though but I have done this on more than one occasion and it always works for me)
I expect you could probably do this will another recovery(stock/twrp) instead of the CF autoroot one but have yet to try.
but you probably will be better off finding original firmware but you will not have Portuguese as you want.
Good luck with trying to fix your device
tiboric said:
O.k the only way I know around this without finding your original firmware and flashing that, is to:
flash the firmware again, and wait until it fails again,
then hold vol down + power + home to get it to restart in to download mode again but keep odin open,
then flash CF autoroot .
then wait for the phone to reboot and it will install root then it will restart two more times on it own then should boot into the O.S.
(i take no responsibility if you mess up you device though but I have done this on more than one occasion and it always works for me)
I expect you could probably do this will another recovery(stock/twrp) instead of the CF autoroot one but have yet to try.
but you probably will be better off finding original firmware but you will not have Portuguese as you want.
Good luck with trying to fix your device
Click to expand...
Click to collapse
Does the CF Autoroot work with G925I?
rafaelpinaf said:
Does the CF Autoroot work with G925I?
Click to expand...
Click to collapse
according to this you can use 925F version but I can not confirm my self as i don't have the device, If you don't mind rooting and tripping knox, I don't think you can do much more harm
androidvergen said:
Hey there, I had a similar problem, what I did was re-install the Samsung drivers and reboot the computer also I turned off my lock screen and activation on the phone. Between the two of those things it allowed ODIN to have success.
Click to expand...
Click to collapse
I also went through this problem too, and this helped thank you
But also for another phone I had to flash using a different computer for this to work.
rafaelpinaf said:
I dont remember the older version, or the original version that was in my phone. It is stuck in Warning screen
Click to expand...
Click to collapse
Maybe you can try each of the stock versions until you get the right one for your particular device. Also maybe a model number would help someone on here to identify what version you have, I don't know just throwing that out there.
My phone is G925i, and in the back says that it is made in Yateley, UK
Wich firmware you think I can try to flash?
I was trying the G925IDVU1AOD1_G925IZTO1AOD1_G925IDVU1AOD1 and then the phone has bee bricked.
rafaelpinaf said:
My phone is G925i, and in the back says that it is made in Yateley, UK
Wich firmware you think I can try to flash?
I was trying the G925IDVU1AOD1_G925IZTO1AOD1_G925IDVU1AOD1 and then the phone has bee bricked.
Click to expand...
Click to collapse
I can't link to the page I go to because of my noob post count but its samsung-updates in google. There is a whole section with various G925i versions I'm sure you'll find it there.
So I just installed the 0.2.3 cm 12 beta rom on and since I was giving my galaxy light to a friend I decided to do a factory reset so when I did that the phone rebooted and now its stuck at the twrp recovery splashscreen. I've already tried rebooting and re-flashing twrp but no luck. Could it be a cache problem or something? Thanks to all in advance who reply.
Koohara947 said:
So I just installed the 0.2.3 cm 12 beta rom on and since I was giving my galaxy light to a friend I decided to do a factory reset so when I did that the phone rebooted and now its stuck at the twrp recovery splashscreen. I've already tried rebooting and re-flashing twrp but no luck. Could it be a cache problem or something? Thanks to all in advance who reply.
Click to expand...
Click to collapse
Im guessing you wiped device and if you go into recovery and try to reboot system it will tell you no os installed if that is the case you can plug device into computer and still use twrp as file manager thats if you had a backup stored on desktop or drag a CM zip to device .
other method of course would be to enter download mode and use odin to flash stock firmware for your device not sure if you have t399 or the N varient lastest beening OH2/OH3 you can find that in my filehost i have stock odin zips to flash.
Koohara947 said:
So I just installed the 0.2.3 cm 12 beta rom on and since I was giving my galaxy light to a friend I decided to do a factory reset so when I did that the phone rebooted and now its stuck at the twrp recovery splashscreen. I've already tried rebooting and re-flashing twrp but no luck. Could it be a cache problem or something? Thanks to all in advance who reply.
Click to expand...
Click to collapse
Im more than sure that I can help you fix it. Metro or tmobile? Kernal? Any previous roms installed? You didnt delete your os but odin will work ill give you a working version and instructions but what version?
_PAG_ said:
Im more than sure that I can help you fix it. Metro or tmobile? Kernal? Any previous roms installed? You didnt delete your os but odin will work ill give you a working version and instructions but what version?
Click to expand...
Click to collapse
Thank you for your response I have already fixed it by installing the stock rom and recovery then rooting it again. Thank you for your help though
Koohara947 said:
Thank you for your response I have already fixed it by installing the stock rom and recovery then rooting it again. Thank you for your help though
Click to expand...
Click to collapse
Which stock rom did you use?
_PAG_ said:
Which stock rom did you use?
Click to expand...
Click to collapse
I used the download from this guide by ShabbyPenguin: http://androidforums.com/threads/guide-restore-your-galaxy-light-to-stock-mja.846767/
Hey guys...I did the same thing but my t399 must have lost battery charge because when I picked it back up, it was dead...I plugged in and it started flashing the Samsung screen slowly at me. It would not reboot. I did get download and twrp to show up and start to atleast work enough to flash and Odin again...I used Shabby's kernel source and it is still doing the same thing after flashing through Odin. Still stuck on Samsung screen slowly flashing and recovery shows no operating system. I'm about to put it back in a drawer but I feel it's so close that I had to ask for help. I flashed shabby work to root and recovery. I flashed twrp 2.7 and the cm12 beta rom. Then back to shabby guide to get it to recognize, it did..kind of..but still boot looped. Flashed 3 times... No changes. Can anyone help or is it time for a staircase? hA!
Oh yes .. I don't think the battery is bad.. I checked it with a meter and it reads voltage. It does get pretty hot while I'm working on it though and my pc shows its charged at 100% but the phone doesn't show that...it stays in like dead mode. Nit recognizing again. Anybody have suggestions? In recovery it also indicated it can not locate most of my files in read after I flash.. what am I doing wrong.
sgh-399n bootloop
It's taken me 2 months to cry for help. I'm not a complete noobie, but I'm completely exhausted. First of all, one morning I woke up and I thought that somehow my battery was dead. It wasn't. Eventually, I found it in a bootloop. This phone was working fine, running a "Tiger_Lilly" ROM the night before. I've tried everything using Odin, adb and fastboot (I'm not sure how to get the phone in fastboot mode and also, before using Odin, TWRP wouldn't mount/data.) I'm stumped. Would appreciate some help, thank you.
HELP...!!!
_PAG_ said:
Im more than sure that I can help you fix it. Metro or tmobile? Kernal? Any previous roms installed? You didnt delete your os but odin will work ill give you a working version and instructions but what version?
Click to expand...
Click to collapse
Hi there sr, i am stuck in a bootloop with the metro-pcs model SGH-t399N ive already tray usin odin and the stock rom, the only way a geit to go into the pone is download mode, and after usin odin the phone is still in a bootloop, can you help me with that?
Fidelacho16 said:
Hi there sr, i am stuck in a bootloop with the metro-pcs model SGH-t399N ive already tray usin odin and the stock rom, the only way a geit to go into the pone is download mode, and after usin odin the phone is still in a bootloop, can you help me with that?
Click to expand...
Click to collapse
What was you using prior to it bootlooping and what rom was installed have you modifed anything else such as partions etc...
also list your method and link rom your trying. just wondering if its the lastest version for device. while in odin also make sure Auto Reboot” and “F. Reset Time is only selected and what version of odin are you using?
If your unable to flash any rom thru odin then there must be a major problem else where until we can narrow it down no one can assist you.
hi good morning, i actually dont know the prior version of the SW, i am using the available version on sammobile of the sw and i am trying odin to flash, ive already used odin 3.8 and 3.9 and the one that said it is configured to this phone in the thread.
Fidelacho16 said:
hi good morning, i actually dont know the prior version of the SW, i am using the available version on sammobile of the sw and i am trying odin to flash, ive already used odin 3.8 and 3.9 and the one that said it is configured to this phone in the thread.
Click to expand...
Click to collapse
Ok try this version of odin 3.0.7 which i added as attachment also i linked my firmware OH3 as you stated your device is t399n i know sammobile takes long to download so this may be faster for you Link HERE
as stated previously make sure only thing selected is Auto Reboot” and “F. Reset Time and add tar file into PDA.
I await your reply if fails i send you adb fastboot etc may be able to grab some logs see whats happening