I have an LG L9. So last night my phone died. After about 2 hours i plugged it up and nothing happened. Left it plugged in over night, and nothing happened. When i hold the power button for about 5 secs or so, the home button LED flashes but it won't turn on. My phone is not rooted or anything. Hope someone can help!
repair ur boot with fastboot method ,when you plug ur phone u must see the omap driver ,if not ur phone is dead ...
If it is completely dead then only way to revive your phone is by boot Repairing using jtag cable and jtag box, look for supplier of jtag box in your region repairing will cost you some where around 15- 20 usd
Sent from my LG-P765 using XDA Premium 4 mobile app
naayja said:
repair ur boot with fastboot method ,when you plug ur phone u must see the omap driver ,if not ur phone is dead ...
Click to expand...
Click to collapse
my computer[Windows 7] recognizes OMAP4430 and tries to download it but can never find it. Where do I find the drivers for an OMAP4430 and how do I install the drivers? I'm trying to recover a bricked L9.
david.shuler21 said:
my computer[Windows 7] recognizes OMAP4430 and tries to download it but can never find it. Where do I find the drivers for an OMAP4430 and how do I install the drivers? I'm trying to recover a bricked L9.
Click to expand...
Click to collapse
look here
http://forum.xda-developers.com/showthread.php?t=2292828
Related
Hi.
Need help with my phone. It has dead boot I think. Can't enter CWM,or dwn mode.
Is there any JTAG support for LG P920?
Or,can I use Octopus Suite for repairing the dead boot of my phone?
Can you give me more details? "Dead boot"
Sent from my GT-S5660 using xda premium
The phone does not power on.
Can't enter CWM,or download mode.
When I connect it to computer just a device "Omap4430" connects and disconnects permanently.
Whatever I do,the device keeps connecting and disconn. again and again.
anyone have pinout for jtag for this phone?
UP
looking for a jtag for LG P920
arsen4oo said:
Hi.
Need help with my phone. It has dead boot I think. Can't enter CWM,or dwn mode.
Is there any JTAG support for LG P920?
Or,can I use Octopus Suite for repairing the dead boot of my phone?
Click to expand...
Click to collapse
Just a question
how did you do brick your phone ?
accidentally erase boot/recovery partitions?
or x-loader / u-boot areas ?
arsen4oo said:
The phone does not power on.
Can't enter CWM,or download mode.
When I connect it to computer just a device "Omap4430" connects and disconnects permanently.
Whatever I do,the device keeps connecting and disconn. again and again.
Click to expand...
Click to collapse
so you can't even enter S/W download mode ?
I have the same problem, maybe even a bit worse!
P920 bricked after a failed flash of CM9 due to battery running out.
Phone now completely dead.
No omap4430 when connected to my PC, all attempts to put the phone into download mode fail, so omap4boot, LGFlashtool etc do not work.
I've tested the battery in my other working P920 and it's fine so it's not a power issue.
Can anyone help?
techtechnique said:
I have the same problem, maybe even a bit worse!
P920 bricked after a failed flash of CM9 due to battery running out.
Phone now completely dead.
No omap4430 when connected to my PC, all attempts to put the phone into download mode fail, so omap4boot, LGFlashtool etc do not work.
I've tested the battery in my other working P920 and it's fine so it's not a power issue.
Can anyone help?
Click to expand...
Click to collapse
Since your phone ran out power in the middle of flashing a ROM then all of the partitions the ROM overwrites with new data are only partially flashed and still contain data from your previously installed ROM. In the process of only partially flashing the partitions due to your phone losing power the partitions have been corrupted (Including boot partition and recovery partitions), which is why your phone isn't able to boot, access recovery mode, download mode, or be recognized by any computer program. At this point unfortunately it seems you have hard bricked your phone and JTAG is really your only option to attempt to revive your phone. However, I have heard the Optimus 3D's JTAG input isn't connected so it isn't functional. You should try bringing it into a repair shop and see what they can do for your phone.
Sent from my SCH-I535 using xda premium
I'll try to update and clean up here in order to clearly show what's been done already.
Not sure if my Xperia Mini can be brought back to life. Any help is appreciated. I already read through a ton of threads with bricked phones, but none of these cases seems to be similar to mine. However, I doubt that my case is unique in any way, so I hope there are some guys out there who can bring me on the right track.
How it happened:
Phone was running smoothly.
Put it on the charger at night (phone was on).
In the morning, phone was off and I couldn't turn it on again.
The symptoms:
Power on button has no effect at all (not even vibrate, as it used to do before)
While connected to PC, the hardware manager shows the "ZEUS Fash Device"
The Flashtool (version 0.9.10.1) says device disconnected
Phone does't go into flashmode (VOL down + USB connect)
The phone:
Xperia Mini
Bootloader unlocked (testpoint method)
ROM: FXP208-cm-10-20130223-UNOFFICIAL-smultron
OC: used max. 1.5 GHz for a couple of minutes in total, but did not OC for the last weeks
What I already checked:
Battery: I checked the battery, it is OK. I have a second ST15i and the battery is fully charged and working with the other phone.
The charger is also OK. Also checked with the other phone.
While connected to the charger with removed battery, the battery connector pins (see attached picture) give me 3.5 V or something.
Turn on with no SIM card and no SD card: Same result - nothing.
Enter flashmode (VOL down + USB connect): Does not work.
Reinstall Flashtool and PC companion: That didn't change anything.
S1tool - identify: Tried "identify" method on phone: no result.
S1tool - patch: Tried to repeat the bootloader unlocking procedure. This works until the point where the unlocking actually should happen, but then it says something like "S1 header not found". Not sure however, if this is usual behaviour because the bootloader was already unlocked.
Tried to use PC companion: Phone not recognized.
(Re-)installed drivers from flashtool -> drivers: No change.
What else I could do:
Connect to a different PC: Don't think this will help, but I might give it a try.
Try to esteblish an ADB connection: I don't know much about that, but wouldn't that require the phone to be running in the first place?
Buy a new phone
Any suggestions?
Any help how to solve this is still appreciated.
one more thing...
Forgot to mention that I can't bring the phone into flashmode (VOL down + USB connect).
... will be able to try more in a couple of hours.
Re: [Q] Bricked? How to reanimate the Mini?
Take its battery out and leave it for sometime. Then keep it on charge for 8-10 hours and see if any led light shows up. Then try to boot up without sim and sdcard.
Press THANKS if I helped,
Best Regards,
AJ
Dont miss the ICON FARM!
Battery is OK. I tried the battery on another Mini.
I also tried, without success:
Left without battery for a while (5 min).
Tried to turn it on with no Sd card and no SIM card.
Any other suggestions, anybody?
I didn't find any thread with a similar problem, but maybe I just can't use the search properly...
a-dummy said:
Battery is OK. I tried the battery on another Mini.
I also tried, without success:
Left without battery for a while (5 min).
Tried to turn it on with no Sd card and no SIM card.
Any other suggestions, anybody?
I didn't find any thread with a similar problem, but maybe I just can't use the search properly...
Click to expand...
Click to collapse
Take out battery, wait 10 seconds, reinsert battery, press volume down and while holding just connect via usb to pc. Don't press anything else, just volume down and connect. Now you are in flashmode, so try to reflash stock ftf. If you can't enter flashmode, I don't know what to do
Problem is, the phone does not go into flashmode (volume down + usb connect).
However, it is recognized by Windows as "ZEUS Fash Device".
Is there any alternative way to get into flashmode?
Since windows recognizes the phone as "ZEUS Fash Device", I guess there must be some way this can be used. It just freaks me out to see the phone in Windows but it does nothing. It' like a coma or something.
a-dummy said:
Since windows recognizes the phone as "ZEUS Fash Device", I guess there must be some way this can be used. It just freaks me out to see the phone in Windows but it does nothing. It' like a coma or something.
Click to expand...
Click to collapse
check the unbrick guide..
check the mentioned symptoms of bricked devices..
as windows is identifying the device i dont think its totally gone..
possible hardware is damaged due to overnyt charging..
Hope ur device nt bricked and will work smoothly again..
Repair using pc companion
Sent from my ST15i using xda app-developers app
I Really Pray That I am wrong
I suspect that during charge the phone was overvolted as it was first used after overclocking.
The device is identified as Zeus device cause it was unlocked using testpoint
so what u can do is to pray that ur CPU was not overvolted
hi. I have similar problem.
it's just that pc doesn't detect it completely. I can't put it into flashmode and pc companion and SEUS won't detect my phone. I tried everything people suggesting but not a single thing works for me. is there anyway to force flash using pc companion or should I throw it away :|
Have you installed the drivers from flashtool -> drivers folder? All drivers for all modes/devices?
Never mind read your question wrong
Thanks for all the suggestions. I tried each and every one, but didn't achieve anything.
Sometimes, you just have to let go...
a-dummy said:
Thanks for all the suggestions. I tried each and every one, but didn't achieve anything.
Sometimes, you just have to let go...
Click to expand...
Click to collapse
I have the exact same problem... No flashprogram finds it but Windows. And only thing it finds is "Qualcomm HS-USB QDLoader 9008" ....
Whats the problem
try uninstalling and then reinstalling drivers in your pc
i hope this will help
Hmm... no suggestions on how to put the phone into flashmode, other than using Vol down + usb connect?
Maybe there is none...
My phone is royally stuffed now. A few days ago, it started showing error message (image) and this morning after a restart, its stuck at the green android logo and won't get into the operating system. I tried the following and didn't work:
- remove sd card, battery both sim cards
- press vol+ and insert into my computer's usb slot
- MT65xx preloader appeared briefly (about 3 secs) in Device Manager and disappear. Too brief for me to do anything
I also tried power and vol+ buttons to get into recovery but I only get a dead Android image with "No Command" message (similar to image).
Before this problem, my computer can connect to my phone fine and I am using ADB_usb_driver_120827 and successfully rooted it about 2 months ago.
I can try something if my computer can hold the USB connection but how to get a USB connection? Please help?
OK my computer can see my phone as an ADB Interface but I still can't connect MTK Tools or SP Flash to it. Any help?
dreamerman said:
OK my computer can see my phone as an ADB Interface but I still can't connect MTK Tools or SP Flash to it. Any help?
Click to expand...
Click to collapse
Connect to the same port you used for root....
Hold only vol up (may be down)
Reinstall drivers....
Follow more methods @ unbrick mt 6577 it may help....
Sent from my IRIS_501 using xda premium
akash akya said:
Connect to the same port you used for root....
Hold only vol up (may be down)
Reinstall drivers....
Follow more methods @ unbrick mt 6577 it may help....
Click to expand...
Click to collapse
Thanks for your help. I fixed it by entering into recovery mode and factory reset it.
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
gekkorist said:
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
Click to expand...
Click to collapse
did you see my solution for the COM/USB port problem here?
Unfortunately i'm facing a bigger isue atm :crying:
Crowds said:
did you see my solution for the COM/USB port problem here?
Unfortunately i'm facing a bigger isue atm :crying:
Click to expand...
Click to collapse
Hey, test with USB Extansion but dont work... or is 1 Meter to short?
gekkorist said:
Hey, test with USB Extansion but dont work... or is 1 Meter to short?
Click to expand...
Click to collapse
humm...not sure, mine has 4mts and it worked on 1st try
usefull tool in one place
Feel free to link your ideas :good:
http://forum.xda-developers.com/and...-tools-one-t2887839/post55673946#post55673946
Thank you
Crowds
i have the same issue, do you have a solution??
i try using a usb expansion of 10 Mts and i have the same issue, not boot no nothing.
luis0n said:
i have the same issue, do you have a solution??
i try using a usb expansion of 10 Mts and i have the same issue, not boot no nothing.
Click to expand...
Click to collapse
Sorry but that's the only solution. The one I've wrote on xda.
In fact its quite easy, the problem is when we ended up without it we stressed
For the first time it took me 1 month but then, after that experience, I've manage to make it work after 5 min. And believe me, since the first time, I've broken mine more than 20 times
Sent from my Lenovo K910 using Tapatalk
gekkorist said:
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
Click to expand...
Click to collapse
hi ,
I have a same problem . I can't activate download mode . It works 2-3 seconds and then the phone goes back to fastboot mode.
Did you find a solution ?
luboii said:
hi ,
I have a same problem . I can't activate download mode . It works 2-3 seconds and then the phone goes back to fastboot mode.
Did you find a solution ?
Click to expand...
Click to collapse
Hi,
no, have no solution. I try all tutorials and usw all Tricks i found in the Internet. Opst, miflash, nothing work. The 2-3 secs in donwloadmoade without a blue led is to short.
I try the tutorials on 6 different computers. Nothing.
I contact the Lenovo support in germany, usa and china, no help..
I found 2 services to unbrick the k910 with a own jtag
1 in Malaysia and 1 in romainia. But i dont trust this peoples.
I buy a new phone and put the k910 in a corner.
Sorry.
Lenovo phone... Never again
any news guy? had same problem with mine. already buy a new battery btw. sighh! when using miflash my phone didt disconnected from download mode but ended with error, while using qpst it keep connect then few second disconnected till my pc get bsod.
Send my phone I offer repair brick k910
I have hard bricked my phone during flashing of rom,
1.Now the device is not powering on
2.it is not recognized by the pc
3.It only gives pop up sound when plugged in and out
somebody help me get me my device back on :
Install proper mtk drivers, if possible test it with another K4 device to connect with pc,
Sent from my Lenovo A7010a48 using XDA Premium 4 mobile app
niranjans8496 said:
I have hard bricked my phone during flashing of rom,
1.Now the device is not powering on
2.it is not recognized by the pc
3.It only gives pop up sound when plugged in and out
somebody help me get me my device back on :
Click to expand...
Click to collapse
Your phone cannot be hard bricked by flashing software. I think you must repeat the procedure by reseting the phone. I think you must seek on the net how to reset your phone.
Send from my Lenovo P1 Pro
niranjans8496 said:
I have hard bricked my phone during flashing of rom,
1.Now the device is not powering on
2.it is not recognized by the pc
3.It only gives pop up sound when plugged in and out
somebody help me get me my device back on :
Click to expand...
Click to collapse
Install proper MTK driver on your PC then search for lenovo k4 note firmware on the internet. Then flash it by using SP Flash tool. Be careful of the firmware that you gonna flash, it should be the same kernel and firmware of your device. . Otherwise it will not work. Search for the instructions in the internet.
Sent from my Lenovo A7010a48 using XDA-Developers mobile app
my lenovo k4 note also hardbricked tell me if you got the problem solved please
niranjans8496 said:
I have hard bricked my phone during flashing of rom,
1.Now the device is not powering on
2.it is not recognized by the pc
3.It only gives pop up sound when plugged in and out
somebody help me get me my device back on :
Click to expand...
Click to collapse
same problem
saikumar.2154 said:
same problem
Click to expand...
Click to collapse
If you hear the sound when you plug the phone to the computer, the sound means that the computer recognises the phone.
Open the device manager and look at the ports area. After you open the ports are plug the phone. Now you should see your phone for 1 or 2 seconds, after the disappears.
The trick is to press the download button on sound flash tool in that moment.
Hope this will help you. Good luck.
Not turning on also no vibration.But can successfully completed flashing.
Help me Lenovo K4 note
niranjans8496 said:
I have hard bricked my phone during flashing of rom,
1.Now the device is not powering on
2.it is not recognized by the pc
3.It only gives pop up sound when plugged in and out
somebody help me get me my device back on :
Click to expand...
Click to collapse