Related
I have a samsung Galaxy S3 GT-I9300 (I9300XXELK4_I9300OJKELK5)
three days ago when I was speak with phone and for end call i pressed power button my phone restarted and Stuck in samsung galaxy sIII logo and not booted
-I can access recovery mod & downloading mod
- I tried to factory reset but no succes ( formatting /data... – formatting /cache... – then restart phone and Stuck in samsung logo)
- I tried to install a custom rom in downloading mod by odin but nandwrite is failed( several time& then i changed usb cable &computer but no succes)
- I copied a rom in my external sd card and tried to install it but when system folder in begining to write phone is restart ( several time)
- I fixed the permissions and then try above again but no succes
- In recovery mod / mounts and storage menu (my phone)
-mont /efs
-unmont / cache
-mount /system
- mount /data
- mount /perload
- mount /sdcard
-Format / cache
-Format / system
-Format / data
-Format / perload
-Format / sdcard
When format cache phone is restart
When format system pone is restart
only I can format data
6- Then i tried install a kernel in my external sd card succesfuly but not fixed issue
Please help me what can i do to fix this issue :crying:
what's the Odin error?
odin error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMA2_I9300OJVEMA1_I9300XXELLA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
looks like SDS. try flashing a pit file
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
stuck heere
SDS return to a service centre see sudden death syndrome post .
jje
Thanks
salasel said:
Thanks
Click to expand...
Click to collapse
I am having the exact same problem as you, I can get into download and recovery mode. Any luck yet with fixing your phone?
hawkar13 said:
I am having the exact same problem as you, I can get into download and recovery mode. Any luck yet with fixing your phone?
Click to expand...
Click to collapse
AS per the thread no self fix it requires a new motherboard .
jje
Hi there guys...I've stumbled onto a problem that I can't fix myself, hence some of your help/expertise is required.
Here's what has happened sofar...
Yesterday a family member of mine lost her phone and asked me for my old SGS3 which was lying around the house.
So after factory resetting the device I gave the phone to her...but then the device got an OTA update...but after update, when the device went to reboot itself, the droid laid dead with a red triangle.
Note: the device was not rooted and was running Touchwiz etc...
Upon reboot, the device got stuck at the Samsung Galaxy SIII - GT-I9300 logo
Then she brought the device back to me and after some searching the web, it seemed that the diagnosis was that the software/firmware may have gotten corrupted.
I followed the TUT (link: here) using ODIN 3.10 , I flashed the International version of 4.3 on my device.
I got the I9300XXUGNJ2_I9300MSTGNJ1_MST file from Sammobile and it worked like a charm...all is well, so I thought.
Today when she turned the phone on in the morning, (she turns it off at night)...the device got stuck at the same place.
But now, even the TUT with ODIN isn't helping...now the whole thing is stuck at SetupConnection.
I have tried the cable, updating the samsung usb drivers, switching the USB ports (not using any USB hub),
making sure that I run the program in admin mode and that there's no ext card connected to the device...but to no avail.
When I hard reset the device I get the following error while the droid lays dead
Code:
E: failed to mount /cache (No such file or directory)
...etc...
Wiping the data/factory reset etc isn't helping either...as it still gives me similar E: failed error.
Rebooting the system gets me back to the stuck Samsung Galaxy SIII - GT-I9300 logo.
Plugging the device with the USB cable to the computer doesn't get me to the ext sd card etc either.
Any ideas?? Help is greatly appreciated.
*UPDATE*
After persisting to follow the TUT mentioned above, finally it went through ODIN and was shown as "PASS"
But when the device reboots after that, the "E: failed to mount error" persists...and I'm back to square one.
contactmsd said:
*UPDATE*
After persisting to follow the TUT mentioned above, finally it went through ODIN and was shown as "PASS"
But when the device reboots after that, the "E: failed to mount error" persists...and I'm back to square one.
Click to expand...
Click to collapse
Sounds like partitions maybe corrupt try the resuce firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << follow instructions exactly as it containes a pit file there are two versions and i think the pit file is in the 4.1.2 version.If this does not work then i think it would probably be a service repair.
tallman43 said:
Sounds like partitions maybe corrupt try the resuce firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << follow instructions exactly as it containes a pit file there are two versions and i think the pit file is in the 4.1.2 version.If this does not work then i think it would probably be a service repair.
Click to expand...
Click to collapse
OK...
First try..gave me the following error in ODIN.
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXAEMG4_KOR_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Then I tried again, after changing the port.
This time I got the following error.
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXAEMG4_KOR_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> tz.img
<ID:0/007> param.bin
<ID:0/007> sboot.bin
<ID:0/007> param.bin
<ID:0/007> tz.img
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
*Sigh*
Emmc chip is corrupt/damaged. Try reading the dead boot restore thread in general forum, but doubtful if worth repairing.
^^above, I was using the 4.1.2 firmware which I got from the thread that @tallman43 mentioned.
But as you can see I got the errors shown above.
Then I tried the same using the 4.3 firmware also from that thread but it had no *.pit file.
In that thread on page 41 though, @k-semler added the *.pit file that he used.
But that resulted in ODIN getting stuck at the .pit thing.
After renaming that *.pit file to mx.pit it worked...
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXAGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> param.bin
<ID:0/004> tz.img
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
BUT after rebooting, the issue remains though.
I'm still stuck at the Samsung Galaxy SIII - GT-I9300 logo
Factory reset in recovery, check for mounting errors.
boomboomer said:
Factory reset in recovery, check for mounting errors.
Click to expand...
Click to collapse
E: failed to mount /cache (No such file or directory) etc...list goes on...
I got some suggestions trying installing Philz Touch Recovery...
So here's what I did...
1. I flashed Philz Touch Recovery using ODIN
It was a pass...and I was able to boot into Philz Recovery.
2. Then I tried installing a Custom ROM (PA) through SD Card.
At first I was getting an error, after checking it seemed that I couldn't access the SD Card.
Then I got myself a new SD card, formatted it to fat32 and transferred the zip files onto it.
3. Installing the Custom ROM (PA)
At first I was getting a Status 7 error.
After editing the updater-script as shown on xda forums..the error went away.
BUT now the installation just aborts and I get the following on my screen.
Code:
Installing: /storage/sdcard1/pa_i9300-4,41-20140705.zip
E: Can't mount /cache/recovery/last_install
E: failed to open last_install: File exists
Finding update package...
Opening update package...
Installing update...
Installation aborted.
press any key to continue.
Note: I also tried with different ROMs (CM11) but same result as above.
Why can't it mount the /cache folder? Could it be a chmod issue??
The error in full from my first post is the following...
Code:
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
E: Can't mount /cache/recovery/last_install
E: Can't open /cache/recovery/last_install
If it's corrupted then why is it listing only that folder and not other folders as well?
Help is really needed and is greatly appreciated guys/gals.
[SOLVED]
I finally got it working...my issue has been resolved.
For those who are interested, this is how I fixed the problem.
I went and got myself:
- stock *.pit file for the SGS3 GT-I9300 16GB variant.
- stock bootloader for SGS3 GT-I9300
- stock Firmware from my Region (Single File variant)
Step 1
Flash the stock *.pit file using ODIN with the following settings ticked on:
- auto reboot
- re-partition
- f.reset time
- Nand erase all
Note: IF for some reason it doesn't work, re-try and it should pass (I myself had to try 3 times).
Step 2
Flash Philz Touch Recovery using ODIN with the following settings ticked on:
- auto reboot
- f.reset time
Note: IF for some reason it doesn't work, re-try and it should pass.
Step 3
Take a Mirco SD card (format if needed, make sure you format it in fat32). Transfer the stock bootloader zip (no need to extract the .zip file) on it and insert the card in your phone.
Step 4
Press Vol.Up+Power+Menu button and keep pressing it until you see the Samsung Galaxy SIII GT-I9300 logo, then release the buttons and the Philz Recovery will boot.
Install the bootloader zip using the "Install from sdcard" option in Philz Touch Recovery.
Step 5
Reboot to recovery and wipe cache and factory reset.
Go to download screen (ODIN MODE).
Step 6
Flash the stock firmware using ODIN with only the following settings ticked on:
- auto reboot
-f.reset time
Note: IF for some reason it doesn't work, re-try and it should pass (I myself had to try 2 times).
Step 7
If all of this is done...then go to Recovery mode (you'll notice that it's no longer the Philz Touch Recovery. No problem, in the current Recovery mode:
- wipe cache
- factory reset
and reboot the device.
This should resolve the problem and your device will work once again.
No cellular due to wrong/fake imei
^^The above did fix my previous problem but I did encounter a new one.
I had a wrong/fake IMEI ("0049..."), which caused that I had no cell reception and couldn't use the phone to call or send/receive sms etc...
I googled a lot and I tried some of the TUT on the web, but nothing helped.
Until I found a thread on the xda that said one could try to flash a newer stock ROM (don't know the exact thread).
So I went ahead and checked the version I was on...luckily it was 4.0.4
I then downloaded a newer stock ROM 4.3 for my region.
And flashed that using ODIN...
and voila...when I checked the IMEI code again, it was back to the original one.
Files that I used to resolve my issues.
I've been asked which .pit file or which ROM etc...did I use to resolve my problem.
So here it is...but do keep in mind, these files may have worked for me but I can't guarantee that they'll work for you too.
Note: therefor use these at your own risk...I'm not responsible for any problems that you may encounter.
Philz Touch Recovery:
I got the "philz_touch_6.12.8-i9300.tar.md5" file from: here
Stock ROM:
I got the stock ROM (single file) "I9300XXUGNJ2_I9300PHNGNJ1_PHN.zip" from: here
That's the: GT-I9300 Netherlands 2014 November 4.3 I9300XXUGNJ2 I9300PHNGNJ1
The stock *.pit file and the stock bootloader that I used, are attached to this post.
The exact steps that I took are in this post: here
Note: Don't forget to backup your EFS, search on xda for how to do that etc...
Best of luck...
Hi,
I have a Galaxy S3 I9300, and one morning its just got bricked.
I can enter the recovery (ClockworkMod Recovery v6.0.2.7) and download mod.
when enter recovery I gets the errors:
E: can't open /cache/recovery/log
E: can't open /cache/recovery/last_log
I can't mount anything. if I try to mount i get an error: "Error mounting /sdcard"
When tring to format cache Im getting the error: "E: format_volume make_extf4fs failed on /dev/block/mmcblk0p8"
thats why I think its internal memory damaged.
adb can recognize my phone BUT fastboot and SkipSoft ToolKit CAN'T. maybe bootloader problem.
I try many thins with Odin but got failed all the time.
I cant wipe anything because I cant mount anything.
Is there a way to fix this?
Thanks in Advance all the help is appreciated.
Go flash official firmware with odin and start again from square 1.
Jericho Arcelao said:
Go flash official firmware with odin and start again from square 1.
Click to expand...
Click to collapse
Jericho Arcelao said:
Go flash official firmware with odin and start again from square 1.
Click to expand...
Click to collapse
sory for the late replay i had some problem with the internt.
I tried again to flash official firmware with odin but i get an error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMK7_I9300OJKGMK1_I9300JKUGML1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
im using odin 3.9 but i tried different version.
any suggetions?
Thanks for your replay.
@TalR: flash a 3part 4.3-firmware with PIT+file. I've only this german link
Is your device the international variant?. If so, try my stuff before flashing a pit file. Also try flashing an official cwr or stock recovery and flash again.
Failing that it is broken.
Sent from my HTC One M9 using Tapatalk
rp158 said:
@TalR: flash a 3part 4.3-firmware with PIT+file. I've only this
Click to expand...
Click to collapse
Thanks For your replay.
I followed the german manual but its doesn't work:crying:
its failed to Re-Partition.
<OSM> Please wait..
<OSM> CP_I9300XXUGNA8_bitstopfen.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300DBTGNG2_bitstopfen.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any other suggestions?
Thanks.
shivadow said:
Is your device the international variant?. If so, try my stuff before flashing a pit file. Also try flashing an official cwr or stock recovery and flash again.
Failing that it is broken.
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
what is it your stuff?
Thanks
Mk6 rom for international I9300: https://drive.google.com/folder/d/0B4vTiHTBB629ZW5vQndpbjFnblk/edit
Sent from my HTC One M9 using Tapatalk
Suddenly phone freezed and restarted and asked me to reset to remove encryption
then when i tried formatting using TWRP it displays the following
Unable to open '' to wipe crypto key
unable to format to remove encryption
Updating partition details......
Failed to mount '/efs' (Invalid Argument)'
Failed to mount '/cache' (Invalid Argument)'
Failed to mount '/System' (Invalid Argument)'
Failed to mount '/data' (Invalid Argument)'
Failed to mount '/preload' (Invalid Argument)'
...done
unable to mount storage
Push an official cwm recovery via odin. If no joy flash back to stock and start over.
Sent from my HTC One M9 using Tapatalk
please let me know how to push CWM from odin . Can you please assist me here
shivadow said:
Push an official cwm recovery via odin. If no joy flash back to stock and start over.
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
This was the result when i tried flashing CWM
<ID:0/015> Added!!
<ID:0/015> Odin engine v(ID:3.1100)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Erase...
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
shivadow said:
Push an official cwm recovery via odin. If no joy flash back to stock and start over.
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
Flash recovery twrp. 2.8.7.3 via heimdall. Other way flash back to stock rom with i9300 pit file via odin.. make sure you choose the right pit for i9300 16gb or i9300 32gb.
Id blame twrp. I had nothing but issues with it. Flash back to stock and start over. It's now your only option.
There is a chance you've had sds (sudden death syndrome) and the nand could be corrupt. You fix it with a pit file via odin but ONLY as a last resort. Flashing pit files is a final throw before pronouncing it's death.
The stuff i use : https://drive.google.com/folder/d/0B4vTiHTBB629ZW5vQndpbjFnblk/edit
You will NOT find a pit file in there as i don't support pit flashing, because it is final. It either works or it doesn't. You will have to find one yourself if you need one.
Sent from my HTC One M9 using Tapatalk
Help please
Hi guys i Got the International version of Samsung galaxy S3 GT-I9300 and something went really Wrong
So i tried every posible way to Unbrick it With every single ODin every recovery tried a 3 different stock Roms but always failed
In Odin I got this Error
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNJ2_I9300MSTGNJ1_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
And also tried do do a Factory reset Through Recovery and apperantly Failed as well i got the screenshot atached bellow with the errors
So please if everyone have a solution for this particular Issue please any help is welcomed Thanks
emptywordsss said:
Hi guys i Got the International version of Samsung galaxy S3 GT-I9300 and something went really Wrong
So i tried every posible way to Unbrick it With every single ODin every recovery tried a 3 different stock Roms but always failed
In Odin I got this Error
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNJ2_I9300MSTGNJ1_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
And also tried do do a Factory reset Through Recovery and apperantly Failed as well i got the screenshot atached bellow with the errors
So please if everyone have a solution for this particular Issue please any help is welcomed Thanks
Click to expand...
Click to collapse
Format /cache through recovery (philz). Mounts and Storage --> Format /Cache.
shivadow said:
Id blame twrp. I had nothing but issues with it. Flash back to stock and start over. It's now your only option.
There is a chance you've had sds (sudden death syndrome) and the nand could be corrupt. You fix it with a pit file via odin but ONLY as a last resort. Flashing pit files is a final throw before pronouncing it's death.
The stuff i use : https://drive.google.com/folder/d/0B4vTiHTBB629ZW5vQndpbjFnblk/edit
You will NOT find a pit file in there as i don't support pit flashing, because it is final. It either works or it doesn't. You will have to find one yourself if you need one.
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
I tried flashing with Odin and Heimdall. All i get at the end is failed. Odin fails at NAND and heimdall runs till 100% for all whatever i choose. Suggest me any procedure on how to check if my internal storage is intact and can be retrieved. So that i can atleast sleep peacefully.
reinzl said:
Flash recovery twrp. 2.8.7.3 via heimdall. Other way flash back to stock rom with i9300 pit file via odin.. make sure you choose the right pit for i9300 16gb or i9300 32gb.
Click to expand...
Click to collapse
This was the result when i tried flashing CWM
<ID:0/015> Added!!
<ID:0/015> Odin engine v(ID:3.1100)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Erase...
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
RajeshVV said:
This was the result when i tried flashing CWM
<ID:0/015> Added!!
<ID:0/015> Odin engine v(ID:3.1100)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Erase...
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
For 16 GB of GT-I9300 only. Please don't try it to other devices.
Reverting To Stock Partition Table GT-I9300 16GB
Sent from my GT-I9300 using Tapatalk
reinzl said:
For 16 GB of GT-I9300 only. Please don't try it to other devices.
Reverting To Stock Partition Table GT-I9300 16GB
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Tried flashing PIT and was unsuccessful. Not sure if the data partition is intact and if so how to know its presence and the status of it.
Anyone solve this problem? I'm using N7100 and get this problem too
Tried to flash PIT with new odin version always noti "failed",
with 3.0.7, 3.0.9, odin freeze at "Get PIT for mapping..", I waited more than 30 minutes but nothing happen,
Tried to flash stock ROM but failed at "NAND Write Start!!"
Someone please help me fix this problem.
Are you using the original Samsung USB cable? Tried other USB cables and USB 2.0 ports?
oh, hi audit13,
Of course I used original Samsung USB cable, I changed some other cables, and USB ports(2.0, 3.0) to test, but nothing new.
I think no one can fix this problem, bring to cell store is the best choice
When flashing with Odin, which is the file that fails to flash? Maybe post the Odin log?
audit13 said:
When flashing with Odin, which is the file that fails to flash? Maybe post the Odin log?
Click to expand...
Click to collapse
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Everytime it end with this failed.
If I flash only PIT, It will stop at
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
I waited for 1 hour but nothing change.
There shoot.bin file is not flashing because the memory is damaged, the ROM is not for the phone, the bootloader in the phone is newer than bootloader in the rom, or you need a different USB cable.
audit13 said:
There shoot.bin file is not flashing because the memory is damaged, the ROM is not for the phone, the bootloader in the phone is newer than bootloader in the rom, or you need a different USB cable.
Click to expand...
Click to collapse
"the bootloader in the phone is newer than bootloader in the rom"
Sorry, but how to know bootloader in the phone is newer than bootloader in the rom?
I flashed Roms with Android ver 4.4.4, 6.0.1, 7.1.1, and don't know much about bootloader, can you help me find my bootloader ver and find the way to resolve this problem. Thanks
A few days back I was trying to flash stock firmware on my S6 edge and Odin failed in between of the flashing since then My phone started showing a blue screen which basically said to use smart switch emergency software recovery but when I open smart switch It says Unsupported Device So I cannot use smart switch on my phone. Yesterday I flashed PIT file Now I do not have that error screen But my phone can only go in download mode and stock recovery. When I try to flash Stock firmware from Odin It gets stuck
Log of Odin
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
I cannot flash twrp aswell Odin says
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
So I cannot Use Odin
When I go into stock recovery it says
Supported API: 3
dm-verity verification failed. . .
E: failed to mount /system (Invalid argument)
If I choose Apply Update from ADB or Apply Update from SD card It says
Update from external storage is disabled.
If I wipe data/factory reset it says
-- Wiping data. . .
Formatting /data. . .
Formatting /cache. . .
Formatting /sbfs. . .
-- Set factory reset done. . .
-- Copying media files. . .
E: failed to mount/ system (Invalid argument)
Can't mount '/system' , rc = '-1' (Invalid argument)
Data wipe complete.
Can someone please help me? Thank you.
raaahimaaa said:
A few days back I was trying to flash stock firmware on my S6 edge and Odin failed in between of the flashing since then My phone started showing a blue screen which basically said to use smart switch emergency software recovery but when I open smart switch It says Unsupported Device So I cannot use smart switch on my phone. Yesterday I flashed PIT file Now I do not have that error screen But my phone can only go in download mode and stock recovery. When I try to flash Stock firmware from Odin It gets stuck
Log of Odin
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
I cannot flash twrp aswell Odin says
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
So I cannot Use Odin
When I go into stock recovery it says
Supported API: 3
dm-verity verification failed. . .
E: failed to mount /system (Invalid argument)
If I choose Apply Update from ADB or Apply Update from SD card It says
Update from external storage is disabled.
If I wipe data/factory reset it says
-- Wiping data. . .
Formatting /data. . .
Formatting /cache. . .
Formatting /sbfs. . .
-- Set factory reset done. . .
-- Copying media files. . .
E: failed to mount/ system (Invalid argument)
Can't mount '/system' , rc = '-1' (Invalid argument)
Data wipe complete.
Can someone please help me? Thank you.
Click to expand...
Click to collapse
Flash a firmware again with pit file. Make sure you are using the correct pit file as each model and region needs a certain pit file.
callumbr1 said:
Flash a firmware again with pit file. Make sure you are using the correct pit file as each model and region needs a certain pit file.
Click to expand...
Click to collapse
I did. Its stuck. it says
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
And on the top it says "Set partitiion" on a white background.
If I just flash the PIT it says this,
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
On a side note, I bought this phone second hand on the back of the phone theres a 16 digit Imei if i remove the last digit and search it on an IMEI checker it says my model number is G925A where as when the phone worked it showed G925F I have tried Flashing Att pit but that doesnt work. Is there something I should know about a 16 digit imei?
Did you fix the issue because i got this message too and can't find a solution.
Mr.Januzi said:
Did you fix the issue because i got this message too and can't find a solution.
Click to expand...
Click to collapse
were you able to figure out the issue yet? i am having the same exact problem on my s7.
I sent it to a local phone repair shop and they fixed it, try to find the combination file(if you know how to use it) and i personally think after the combination file is flashed, you will be able to flash the stock firmware again with no issues.
I DID NOT TRY THIS METHOD, but i think it would work.
I personally would try it. It's up to you.
Kind regards,
Mr.Januzi said:
I sent it to a local phone repair shop and they fixed it, try to find the combination file(if you know how to use it) and i personally think after the combination file is flashed, you will be able to flash the stock firmware again with no issues.
I DID NOT TRY THIS METHOD, but i think it would work.
I personally would try it. It's up to you.
Kind regards,
Click to expand...
Click to collapse
I am more of a Moto user... Combination file.. the AP/BP/CR/CSC? How do I know which are the proper files for my device?
PM me your firmware specs that you see on recovery and I believe we can make this work.