I have a samsung Galaxy S3 GT-I9300 (I9300XXELK4_I9300OJKELK5)
three days ago when I was speak with phone and for end call i pressed power button my phone restarted and Stuck in samsung galaxy sIII logo and not booted
-I can access recovery mod & downloading mod
- I tried to factory reset but no succes ( formatting /data... – formatting /cache... – then restart phone and Stuck in samsung logo)
- I tried to install a custom rom in downloading mod by odin but nandwrite is failed( several time& then i changed usb cable &computer but no succes)
- I copied a rom in my external sd card and tried to install it but when system folder in begining to write phone is restart ( several time)
- I fixed the permissions and then try above again but no succes
- In recovery mod / mounts and storage menu (my phone)
-mont /efs
-unmont / cache
-mount /system
- mount /data
- mount /perload
- mount /sdcard
-Format / cache
-Format / system
-Format / data
-Format / perload
-Format / sdcard
When format cache phone is restart
When format system pone is restart
only I can format data
6- Then i tried install a kernel in my external sd card succesfuly but not fixed issue
Please help me what can i do to fix this issue :crying:
what's the Odin error?
odin error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMA2_I9300OJVEMA1_I9300XXELLA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
looks like SDS. try flashing a pit file
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
stuck heere
SDS return to a service centre see sudden death syndrome post .
jje
Thanks
salasel said:
Thanks
Click to expand...
Click to collapse
I am having the exact same problem as you, I can get into download and recovery mode. Any luck yet with fixing your phone?
hawkar13 said:
I am having the exact same problem as you, I can get into download and recovery mode. Any luck yet with fixing your phone?
Click to expand...
Click to collapse
AS per the thread no self fix it requires a new motherboard .
jje
Related
Hello guys, Hope someone can help me!
After experimenting with making a bootable usb on my android to use to install windows on a computer, It all went wrong. Now my internal storage is gone and it can't mount it back. Camera does not work, either does Rom Manager, bot is saying that I have to mount a sd card to get it to work.
I have a Samsung Galaxy S II
ROM = CyanogenMod version 9.0.0-galaxys2
ClockWorkMod Recovery 5.8.1.5
If I go to settings -> Storage I can see the following listed:
INTERNAL STORAGE
Total Space 1.97GB (Apps 349mb, Available 1,60GB)
INTERNAL STORAGE
<Mount SD card> <- when pressing this I can for a short time see apps, pictures etc but it goes back)
INTERNAL STORAGE
SD CARD
Total space 25,99GB
Available 25,99GB
USB STORAGE
grey
larsen82 said:
Hello guys, Hope someone can help me!
After experimenting with making a bootable usb on my android to use to install windows on a computer, It all went wrong. Now my internal storage is gone and it can't mount it back. Camera does not work, either does Rom Manager, bot is saying that I have to mount a sd card to get it to work.
I have a Samsung Galaxy S II
ROM = CyanogenMod version 9.0.0-galaxys2
ClockWorkMod Recovery 5.8.1.5
If I go to settings -> Storage I can see the following listed:
INTERNAL STORAGE
Total Space 1.97GB (Apps 349mb, Available 1,60GB)
INTERNAL STORAGE
<Mount SD card> <- when pressing this I can for a short time see apps, pictures etc but it goes back)
INTERNAL STORAGE
SD CARD
Total space 25,99GB
Available 25,99GB
USB STORAGE
grey
Click to expand...
Click to collapse
You need to flash the stock firmware with patched .pit file
Swyped from Samsung Galaxy SII
Does not seem to work for me. Tried several firmwares with no luck. No the phone doesn't work what so ever.
larsen82 said:
Does not seem to work for me. Tried several firmwares with no luck. No the phone doesn't work what so ever.
Click to expand...
Click to collapse
You have yourself to blame here bro.
I think this may be final solution if your phone is still under warranty.
-Restore the phone to stock if possible,
-Remove Yellow Triangle (if present)
-Reset binary counter
-Send it to Samsung Service center for repairs
good luck
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLPO_I9100NEELP4_I9100XXLQ6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003>
<ID:0/003> Receive Response from boot-loader
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
larsen82 said:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLPO_I9100NEELP4_I9100XXLQ6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003>
<ID:0/003> Receive Response from boot-loader
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Visit this thread
Thank you Jokesy, that linked guide helped me Now I'm back with Cyanogenmod 9.1 and working sd card!
larsen82 said:
Thank you Jokesy, that linked guide helped me Now I'm back with Cyanogenmod 9.1 and working sd card!
Click to expand...
Click to collapse
Glad, it worked for you
Swyped from Samsung Galaxy SII
hello everyone
I have samsung galaxy ace gt-s5830i. and it had crashed and only what can i see is Samsung logo running again and again in a loop.
I tried to do factory reset from recovery mood but it didn't work, even i tried to setup new firmware by using Odin and it dint work too.
please advice if anyone have a solution for my issue ill be very thankful.
bootloop
ah2mhm said:
hello everyone
I have samsung galaxy ace gt-s5830i. and it had crashed and only what can i see is Samsung logo running again and again in a loop.
I tried to do factory reset from recovery mood but it didn't work, even i tried to setup new firmware by using Odin and it dint work too.
please advice if anyone have a solution for my issue ill be very thankful.
Click to expand...
Click to collapse
hey ur cell is is bootlooping.... try to wipe all. then try to flash stock firmware via odin. and again wipe all.. it works..
lpradol said:
hey ur cell is is bootlooping.... try to wipe all. then try to flash stock firmware via odin. and again wipe all.. it works..
Click to expand...
Click to collapse
I tried already, it is not able even to wipe!! when i apply "wipe data/factory reset" from the recovery list sometimes hang and hold the screen and other times keep restarting and gives me Samsung Galaxy Ace GT-S5830i logo.
And when I use Odin3 v3.07 to install new stock firmware it gives me the following and the same result again, keep restarting and gives me Samsung Galaxy Ace GT-S5830i logo without any success
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXMC1_S5830iOXXLL1_RST_S5830iXXMB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> BcmCP.img
<ID:0/003> boot.img
<ID:0/003> system.img
<ID:0/003> param.lfs
<ID:0/003> csc.rfs
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
??
ah2mhm said:
I tried already, it is not able even to wipe!! when i apply "wipe data/factory reset" from the recovery list sometimes hang and hold the screen and other times keep restarting and gives me Samsung Galaxy Ace GT-S5830i logo.
And when I use Odin3 v3.07 to install new stock firmware it gives me the following and the same result again, keep restarting and gives me Samsung Galaxy Ace GT-S5830i logo without any success
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXMC1_S5830iOXXLL1_RST_S5830iXXMB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> BcmCP.img
<ID:0/003> boot.img
<ID:0/003> system.img
<ID:0/003> param.lfs
<ID:0/003> csc.rfs
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
are you tried nandroid restore...
ah2mhm said:
I tried already, it is not able even to wipe!! when i apply "wipe data/factory reset" from the recovery list sometimes hang and hold the screen and other times keep restarting and gives me Samsung Galaxy Ace GT-S5830i logo.
Click to expand...
Click to collapse
man use the pit file while flashing...and tick re-partition !!
pit file is in odin folder
Sent from my GT-S5830i using xda app-developers app
nothing work
lpradol said:
are you tried nandroid restore...
Click to expand...
Click to collapse
please, can you tell me how to use Android restore?
nothing work too
srt99 said:
man use the pit file while flashing...and tick re-partition !!
pit file is in odin folder
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
thanks for advice man, I tried but nothing work too, its the same result.
please advice if there is another way?
ah2mhm said:
thanks for advice man, I tried but nothing work too, its the same result.
please advice if there is another way?
Click to expand...
Click to collapse
Use odin v1.84
Use multi pakage firmware
Use pit file hope it will solve :fingers-crossed::laugh:
go into recovery then factory data reset again and clear your cache partition. If you have CWM recovery than also wipe your dalvik cache. another thing you might want to try is to take out the battery for 30 secs than re-insert it. take out the SIM card and the micro SD card as well. If all of those do not work than maybe look for more threads like this or Google your problem. oh I just got another idea when you go into recovery mode and select reboot device look at the bottom to see log information and than Google that problem. I will be honest with you your not the only one which has/d the same problem...one day I was playing a game called 'vector' and when I opened it up it came up with a sign saying that the game used arcitecture ARM7 and Ace-i is arcitecture ARM6. It also said tat it was likely to crash but I played It anyway. I had played It for along while and got really far but one time I had completed another level (I was at school at the time) and the screen went black so I got the screen active again and did my lock screen pattern but it just froze there for a really long time than the screen blacked out for no reason again and BAM im in a bootloop... my mum had eventually found out and the problem so with out me knowing she sent it back to the repair center even though I could have flashed a stock ROM via Odin! (It was under warranty thankfully)
Coming from LiquidSmooth 2.9
Ran triangleaway, then went into download mode, and flashed
KIES_HOME_I9300XXEMG4_I9300OXAEMG4_1314436_REV00_user_low_ship.tar.md5
Odin reported:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXEMG4_I9300OXAEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> sboot.bin
<ID:0/003> tz.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
Click to expand...
Click to collapse
Phone rebooted and now I'm just getting the Samsung logo continuously..
Power on, swirly logo, SAMSUNG, swirly logo, SAMSUNG etc..
Help Please.
How do I get this back to stock ?
Thanks
Basic faqs and guides .
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .
Probable fail to wipe phone .
Factory reset flash rom again
JJEgan said:
Basic faqs and guides .
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .
Probable fail to wipe phone .
Factory reset flash rom again
Click to expand...
Click to collapse
Thanks
Obviously should have read this before I started.
Can you advise the best way forward now. ?
Do I try again using Odin and the same file ?
Thanks
Probably should mention I was following this guide:
[Tut] Unroot the Galaxy SIII (for stock updates/warranty)
I would try flashing recovery and then wiping the phone .
JJEgan said:
I would try flashing recovery and then wiping the phone .
Click to expand...
Click to collapse
I managed to get into recovery and that told me it applied BTU.
I've cleared the data/factory reset and cache.
Phone has rebooted and now it appears to have loaded
Thanks
I have a Samsung Galaxy S2 i9100G model which was running Cyanogenmod Kitkat version. I wanted to get it on stock firmware. So I downloaded the stock Indian firmware (I9100GDDLS3_I9100GODDLS3_INU) and via ODIN flashed the PD file. Everything went fine according to ODIN but now my phone is just rebooting with the Samsung logo. Can anyone help me what went wrong here? Here is the details of Odin process.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GDDLS3_I9100GODDLS3_I9100GDDLS2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> MLO
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> param.lfs
<ID:0/003> Sbl.bin
<ID:0/003> zImage
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
choosymoron said:
I have a Samsung Galaxy S2 i9100G model which was running Cyanogenmod Kitkat version. I wanted to get it on stock firmware. So I downloaded the stock Indian firmware (I9100GDDLS3_I9100GODDLS3_INU) and via ODIN flashed the PD file. Everything went fine according to ODIN but now my phone is just rebooting with the Samsung logo. Can anyone help me what went wrong here? Here is the details of Odin process.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GDDLS3_I9100GODDLS3_I9100GDDLS2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> MLO
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> param.lfs
<ID:0/003> Sbl.bin
<ID:0/003> zImage
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Just reboot to stock recovery and wipe data (factory reset) and wipe cache, and the phone will boot fine
MigoMujahid said:
Just reboot to stock recovery and wipe data (factory reset) and wipe cache, and the phone will boot fine
Click to expand...
Click to collapse
Yeah I guess that's the step missing, I will do that the only issue is my HOME button is not working right now will get it repaired and then try the same. Thanks for the reply.
Yeah booted my phone properly into stock. So for anyone who will be stuck in future and would be wondering what to do.. Wiping the data and clearing the cache is the way to go.
Thanks for the help.
greetings. this did not work for me. iv tried to wipe data and wipe cache, and even reflashed the sgs2 but nothing happened. i tried a suggestion in another forum to flash a custom recovery so that i could also wipe the dalvik cache but nothing changed. i can go into recovery just fine and i can install a custom rom as long as the zip file is in the phone memory but not on an external sd card. please help
A few days back I was trying to flash stock firmware on my S6 edge and Odin failed in between of the flashing since then My phone started showing a blue screen which basically said to use smart switch emergency software recovery but when I open smart switch It says Unsupported Device So I cannot use smart switch on my phone. Yesterday I flashed PIT file Now I do not have that error screen But my phone can only go in download mode and stock recovery. When I try to flash Stock firmware from Odin It gets stuck
Log of Odin
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
I cannot flash twrp aswell Odin says
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
So I cannot Use Odin
When I go into stock recovery it says
Supported API: 3
dm-verity verification failed. . .
E: failed to mount /system (Invalid argument)
If I choose Apply Update from ADB or Apply Update from SD card It says
Update from external storage is disabled.
If I wipe data/factory reset it says
-- Wiping data. . .
Formatting /data. . .
Formatting /cache. . .
Formatting /sbfs. . .
-- Set factory reset done. . .
-- Copying media files. . .
E: failed to mount/ system (Invalid argument)
Can't mount '/system' , rc = '-1' (Invalid argument)
Data wipe complete.
Can someone please help me? Thank you.
raaahimaaa said:
A few days back I was trying to flash stock firmware on my S6 edge and Odin failed in between of the flashing since then My phone started showing a blue screen which basically said to use smart switch emergency software recovery but when I open smart switch It says Unsupported Device So I cannot use smart switch on my phone. Yesterday I flashed PIT file Now I do not have that error screen But my phone can only go in download mode and stock recovery. When I try to flash Stock firmware from Odin It gets stuck
Log of Odin
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
I cannot flash twrp aswell Odin says
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
So I cannot Use Odin
When I go into stock recovery it says
Supported API: 3
dm-verity verification failed. . .
E: failed to mount /system (Invalid argument)
If I choose Apply Update from ADB or Apply Update from SD card It says
Update from external storage is disabled.
If I wipe data/factory reset it says
-- Wiping data. . .
Formatting /data. . .
Formatting /cache. . .
Formatting /sbfs. . .
-- Set factory reset done. . .
-- Copying media files. . .
E: failed to mount/ system (Invalid argument)
Can't mount '/system' , rc = '-1' (Invalid argument)
Data wipe complete.
Can someone please help me? Thank you.
Click to expand...
Click to collapse
Flash a firmware again with pit file. Make sure you are using the correct pit file as each model and region needs a certain pit file.
callumbr1 said:
Flash a firmware again with pit file. Make sure you are using the correct pit file as each model and region needs a certain pit file.
Click to expand...
Click to collapse
I did. Its stuck. it says
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
And on the top it says "Set partitiion" on a white background.
If I just flash the PIT it says this,
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
On a side note, I bought this phone second hand on the back of the phone theres a 16 digit Imei if i remove the last digit and search it on an IMEI checker it says my model number is G925A where as when the phone worked it showed G925F I have tried Flashing Att pit but that doesnt work. Is there something I should know about a 16 digit imei?
Did you fix the issue because i got this message too and can't find a solution.
Mr.Januzi said:
Did you fix the issue because i got this message too and can't find a solution.
Click to expand...
Click to collapse
were you able to figure out the issue yet? i am having the same exact problem on my s7.
I sent it to a local phone repair shop and they fixed it, try to find the combination file(if you know how to use it) and i personally think after the combination file is flashed, you will be able to flash the stock firmware again with no issues.
I DID NOT TRY THIS METHOD, but i think it would work.
I personally would try it. It's up to you.
Kind regards,
Mr.Januzi said:
I sent it to a local phone repair shop and they fixed it, try to find the combination file(if you know how to use it) and i personally think after the combination file is flashed, you will be able to flash the stock firmware again with no issues.
I DID NOT TRY THIS METHOD, but i think it would work.
I personally would try it. It's up to you.
Kind regards,
Click to expand...
Click to collapse
I am more of a Moto user... Combination file.. the AP/BP/CR/CSC? How do I know which are the proper files for my device?
PM me your firmware specs that you see on recovery and I believe we can make this work.