Restore to stock. Gone in bootloop :( - Galaxy S II Q&A, Help & Troubleshooting

I have a Samsung Galaxy S2 i9100G model which was running Cyanogenmod Kitkat version. I wanted to get it on stock firmware. So I downloaded the stock Indian firmware (I9100GDDLS3_I9100GODDLS3_INU) and via ODIN flashed the PD file. Everything went fine according to ODIN but now my phone is just rebooting with the Samsung logo. Can anyone help me what went wrong here? Here is the details of Odin process.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GDDLS3_I9100GODDLS3_I9100GDDLS2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> MLO
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> param.lfs
<ID:0/003> Sbl.bin
<ID:0/003> zImage
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)

---

choosymoron said:
I have a Samsung Galaxy S2 i9100G model which was running Cyanogenmod Kitkat version. I wanted to get it on stock firmware. So I downloaded the stock Indian firmware (I9100GDDLS3_I9100GODDLS3_INU) and via ODIN flashed the PD file. Everything went fine according to ODIN but now my phone is just rebooting with the Samsung logo. Can anyone help me what went wrong here? Here is the details of Odin process.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GDDLS3_I9100GODDLS3_I9100GDDLS2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> MLO
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> param.lfs
<ID:0/003> Sbl.bin
<ID:0/003> zImage
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Just reboot to stock recovery and wipe data (factory reset) and wipe cache, and the phone will boot fine

---

MigoMujahid said:
Just reboot to stock recovery and wipe data (factory reset) and wipe cache, and the phone will boot fine
Click to expand...
Click to collapse
Yeah I guess that's the step missing, I will do that the only issue is my HOME button is not working right now will get it repaired and then try the same. Thanks for the reply.

---

Yeah booted my phone properly into stock. So for anyone who will be stuck in future and would be wondering what to do.. Wiping the data and clearing the cache is the way to go.
Thanks for the help.

---

greetings. this did not work for me. iv tried to wipe data and wipe cache, and even reflashed the sgs2 but nothing happened. i tried a suggestion in another forum to flash a custom recovery so that i could also wipe the dalvik cache but nothing changed. i can go into recovery just fine and i can install a custom rom as long as the zip file is in the phone memory but not on an external sd card. please help