I bought the device on my way to UK. Must ship device for warranty.
Device is SGS III blue started good and downloaded apps. after removing original sim and inserting US sim. phone start to heat restart and now stuck on samsung galaxy s III logo and restart again. Download mode works fine but wipe data V up+Home+Power doesnt work. Original Rom country code was XSG. Any idea?
I think I need full stock firmware not only .MD5 on Odin but CSC -Phone- PDA-Bootloader any International version.
As long as download mode working that means we safe are we?
Log
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXALE9_I9300OJVALE9_I9300XXLE8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> boot.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> recovery.img
<ID:0/003> modem.bin
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
Related
Phone had some messaging problem so i flash it with i9100 ICS Rom . But Odin gives me the after 70% of flashing
Rom used ... I9100XXLPQ_I9100OXXLPD_NEE ( ICs 4.0.3 )
please help me urgently . what should i do
Help . !!! anyone ?
aamszia said:
Help . !!! anyone ?
Click to expand...
Click to collapse
Have you tried to flash a different image?
another build?
USB Jig Samsung Galaxy S2
Get yourself "USB Jig Samsung Galaxy S2" of ebay... I just bought for 1.96. How to "make" (which you would not need thou) and use you will find on www galaxys2root dot com. Also will help you later if you want to remove yellow trianlge and flash count... hope this helps...
Rulandas said:
Get yourself "USB Jig Samsung Galaxy S2" of ebay... I just bought for 1.96. How to "make" (which you would not need thou) and use you will find on www galaxys2root dot com. Also will help you later if you want to remove yellow trianlge and flash count... hope this helps...
Click to expand...
Click to collapse
Well phone is going to download mode .. so need for Jtag .. by the way i am a champion in Jtag which is not needed here ..
i have downloaded this
M250S_HOME_M250S.UC08.1858_CL226872_REV02_user_low_ship_source.jkh.tar.md5
but
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> M250S_HOME_M250S.UC08.1858_CL226872_REV02_user_low_ship_source.jkh.tar.md5 is invalid.
<OSM> End...
Problem solved by reading this forum ..
Pit + Flash .
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XXLPQ_I9100OXXLPD_I9100XXLPQ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> param.lfs
<ID:0/003> Sbl.bin
<ID:0/003> zImage
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
Now Phone is ICS 4.0.3 Official
I9100XXLPQ_I9100OXXLPD_I9100XXLPQ_HOME.tar + u1_02_20110310_emmc_EXT4.pit
aamszia said:
Problem solved by reading this forum ..
Pit + Flash .
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XXLPQ_I9100OXXLPD_I9100XXLPQ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> param.lfs
<ID:0/003> Sbl.bin
<ID:0/003> zImage
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
Now Phone is ICS 4.0.3 Official
I9100XXLPQ_I9100OXXLPD_I9100XXLPQ_HOME.tar + u1_02_20110310_emmc_EXT4.pit
Click to expand...
Click to collapse
So this means you were successfully able to install a non korean stock (English Version) of i9100 ROM on M250 right?
Have it resolved the SMS issue? and this also means we can install any custom cooked ROM of i9100 on M250?
Would really appreciate if you could answer this because someone is selling me S2 M250 model so I just wanna know if Im not making a mistake.
craftsvision said:
So this means you were successfully able to install a non korean stock (English Version) of i9100 ROM on M250 right?
Have it resolved the SMS issue? and this also means we can install any custom cooked ROM of i9100 on M250?
Would really appreciate if you could answer this because someone is selling me S2 M250 model so I just wanna know if Im not making a mistake.
Click to expand...
Click to collapse
yes he Did and i tested it and it's Working OK no Problems but You Will Lose NFC
Ok just tried to go from cm10.1 to stock but now I'm stuck in a boot loop and I have no idea what to do, here the what Odin said:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXELLA_I9300H3GELL1_I9300NELK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> recovery.img
<ID:0/003> modem.bin
<ID:0/003> tz.img
<ID:0/003> sboot.bin
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
I can go in to download mode if that helps..
I think I found a solution but I'm in the middle of doing it now will post if it worked
http://forum.xda-developers.com/showthread.php?p=38780087#post38780087
You'll have to go to recovery and wipe data. That'll remove everything from the internal SD card, of course, but the phone will boot up. I faced this issue little while ago. This solved it.
Sent from my GT-I9300 using xda app-developers app
read the basics. you have to wipe data when switching ROMs. flash a custom recovery via Odin and wipe data from there, so that it doesn't wipe your internal sd
hi guys,
i have an att note and was trying to root of odin
went through all the process, ODIN even Gave me the green light pass
and reboot the phone, its just that the phone came back on and never seem to pass the samsung screens
so ive decide to do a recover with CWM recovery i got this
and the phone stuck on the same screen and
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> cwm-touch-i717-120409.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/008> Added!!
<ID:0/008> Removed!!
<ID:0/008> Added!!
not sure if this help but in download menu i have custom binary yes (5counts)
guys please help, or did i fried my phone
thanks
Thread moved to Q and A - please post in accordance with XDA rules.
boot into the recovery you installed and wipe cache/dalvik
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Do you have a Canadian version of the note? If so you have to disconnect the phone from the pc as soon as Odin shows PASS, pull the battery from the phone, put the battery back in the phone and enter recovery with the vol + and - and the power button.
Ive been trying to fix my Samsung S3 GT- I9300, stuck on Samsung Logo, when i go to android system recovery, i get alot of errors,starting with cant mount efs then followed by alot of red colored errors,data factory reset , wipe partitions, wipe cache is giving errors also, when i go to download mode and tried flashing thru Odin with stock firmware from sammobile using only the PDA/AP
I9300XXUGNA5_I9300OLBGNB1_I9300DXUGNB1_HOME.tar
but gives me this error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNA5_I9300OLBGNB1_I9300DXUGNB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Help!, i dont know what to do next.
zansan said:
Ive been trying to fix my Samsung S3 GT- I9300, stuck on Samsung Logo, when i go to android system recovery, i get alot of errors,starting with cant mount efs then followed by alot of red colored errors,data factory reset , wipe partitions, wipe cache is giving errors also, when i go to download mode and tried flashing thru Odin with stock firmware from sammobile using only the PDA/AP
I9300XXUGNA5_I9300OLBGNB1_I9300DXUGNB1_HOME.tar
but gives me this error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNA5_I9300OLBGNB1_I9300DXUGNB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Help!, i dont know what to do next.
Click to expand...
Click to collapse
Try flashing the latest TWRP through Odin. Download it from their website 2.8.6.1 in .tar format and flash. Then flash the stock firmware.
Hello every body
i have S6 edge that show a green screen "an error has occurred while updating the device software. use the emergency recovvery function in the smart switch pc software"
i tried with smart switch and mention phone dosen't support this type of recovery
i tried flash it with odin and it'mention:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any solution plz?
Hi...if your problem is still active - not solved! Here a little Note for you that maybe help you to get s6 edge running again.
First you need to start Odin 3.12.03 with Admin rights!!!
Then you could use the Firmware from my Google Drive if you want. Its the German Variant with CSC-DBT
https://drive.google.com/file/d/1pDybynK6_Huu-vjM_azIjgz30IIhlEAP/view?usp=sharing
If you want to use SamFirm by your own. Keep attention that you check the "Binary Nature" !!!!!!!!!!!!!!!!!!!!!!!!!!
If not...its just 1,9 Gb and dont work
If yes...its over 2,3 Gb and work fine
so good luck man