Hello every body
i have S6 edge that show a green screen "an error has occurred while updating the device software. use the emergency recovvery function in the smart switch pc software"
i tried with smart switch and mention phone dosen't support this type of recovery
i tried flash it with odin and it'mention:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any solution plz?
Hi...if your problem is still active - not solved! Here a little Note for you that maybe help you to get s6 edge running again.
First you need to start Odin 3.12.03 with Admin rights!!!
Then you could use the Firmware from my Google Drive if you want. Its the German Variant with CSC-DBT
https://drive.google.com/file/d/1pDybynK6_Huu-vjM_azIjgz30IIhlEAP/view?usp=sharing
If you want to use SamFirm by your own. Keep attention that you check the "Binary Nature" !!!!!!!!!!!!!!!!!!!!!!!!!!
If not...its just 1,9 Gb and dont work
If yes...its over 2,3 Gb and work fine
so good luck man
Related
So my friend was trying to fix the wifi on his Note while on Sky Rom (4.3), but, for some reason he happened to have clicked a link to the wrong section and was in the n7100 (international) section. He used Odin to flash the MJ5 bootloader which is the international version. Now his phone will only bootloop with the N7100 boot screen appearing. We are not able to access recovery but we can get to download mode. Once we got to download mode I have tried flashing the PIT file, root66, and the official VRAMC3. Each attempt without a PIT file causes this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And any attempts with the PIT file causes this
003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be very much appreciated because I have run out of ideas at this point.
Jet5195 said:
So my friend was trying to fix the wifi on his Note while on Sky Rom (4.3), but, for some reason he happened to have clicked a link to the wrong section and was in the n7100 (international) section. He used Odin to flash the MJ5 bootloader which is the international version. Now his phone will only bootloop with the N7100 boot screen appearing. We are not able to access recovery but we can get to download mode. Once we got to download mode I have tried flashing the PIT file, root66, and the official VRAMC3. Each attempt without a PIT file causes this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And any attempts with the PIT file causes this
003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be very much appreciated because I have run out of ideas at this point.
Click to expand...
Click to collapse
I went through this last month and check these things:
- Try a different USB cord
- Try a different USB port
- Disable your antivirus
- May have to reboot your computer
When I softbricked a few weeks ago I went through this process for the first time, and I found I had to keep trying over and over but it finally ended up working.
Remember to unlock your bootloader after this process - which I did not and had to redo everything after rooting and flashing and getting the Verizon discovered unauthorized software etc.
Also, I wonder if this is part of the issue, while in download mode I get "PRODUCT NAME: GT-N7100" instead of sch-i605, could this be part of the issue?
And thanks for the ideas Darbylonia, I tried those and even different computers and still no luck.
Jet5195 said:
Also, I wonder if this is part of the issue, while in download mode I get "PRODUCT NAME: GT-N7100" instead of sch-i605, could this be part of the issue?
And thanks for the ideas Darbylonia, I tried those and even different computers and still no luck.
Click to expand...
Click to collapse
Did you try looking through the top stickied post about how to recover from a soft brick? I would go there and see if the info helps and post there. I do think it is strange about the product name but there's got to be a fix so keep on...
Searched and have tried to fix my issue on here for 2 days now reaching out for help. Rooted my verizon Note 3 SM-N009 running 4.4.2 with safestap and tried to flash a rom from this post http://forum.xda-developers.com/showthread.php?t=2726558. Completly new to rooting and everything. I have downloaded oden 3.07 and 3.09 and get the same problem
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.08.9-hltevzw.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have a nandroid backup to my stock root on my internal sd card. Someone lend me a hand
I NEED SOME HELP
I bought a new note 2 from amazon but for some reason it came modified so i tried to flash a stock rom.
The first flash failed but now the phone is soft bricked
I cant get into recovery mode but i can get into download mode
I've downloaded at least 3 different stock note 2 roms and each time i try i get nand write start operation failed
ive tried different usb cables and computers and different versions of odin all with no luck
Some help asap would be great as im getting desperate.
Im using a Samsung Galaxy note 2 Unlocked SGH-1317
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100UBUFNE2_N7100UUBFNE2_N7100UBUFNE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
warriorpanda said:
I NEED SOME HELP
I bought a new note 2 from amazon but for some reason it came modified so i tried to flash a stock rom.
The first flash failed but now the phone is soft bricked
I cant get into recovery mode but i can get into download mode
I've downloaded at least 3 different stock note 2 roms and each time i try i get nand write start operation failed
ive tried different usb cables and computers and different versions of odin all with no luck
Some help asap would be great as im getting desperate.
Im using a Samsung Galaxy note 2 Unlocked SGH-1317
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100UBUFNE2_N7100UUBFNE2_N7100UBUFNE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I would recommend taking a look at this thread that should help you solve your problem http://forum.xda-developers.com/showthread.php?t=2851096
hi guys..
is there any wat to downgrade this version (i545VRUFNK1) to 4.3..?
t-mobile_mda said:
hi guys..
is there any wat to downgrade this version (i545VRUFNK1) to 4.3..?
Click to expand...
Click to collapse
yes downgraded..
first flash with this;
MK2_system_4downgrade
then flash,
MK2VZW-downgrade4rooting-AIOdin-gogolie
Bricked S4 SCH-I545
NEED HELP PLEASE!!!
I tried the Odlin3 approach for full wipe (with 3.09, 3.07, 3.10 version) but I get a fail as posted below. I'm completely stuck. I tried using Kies approach posted on another tread and the approach on http://forum.xda-developers.com/showthread.php?t=2751461. Both approaches failed. I've downloaded about 20GB of firmware and each fails. When I just try to power on the device it shows the SAMSUNG name and the "Unlocked" icon. Any suggestions?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_I545VRUFNC5_I545VZWFNC5_1151670_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
treaklet said:
NEED HELP PLEASE!!!
I tried the Odlin3 approach for full wipe (with 3.09, 3.07, 3.10 version) but I get a fail as posted below. I'm completely stuck. I tried using Kies approach posted on another tread and the approach on http://forum.xda-developers.com/showthread.php?t=2751461. Both approaches failed. I've downloaded about 20GB of firmware and each fails. When I just try to power on the device it shows the SAMSUNG name and the "Unlocked" icon. Any suggestions?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_I545VRUFNC5_I545VZWFNC5_1151670_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
When you boot into download mode what version does it say you are on? (it's the red lettering at the very top)
BladeRunner said:
When you boot into download mode what version does it say you are on? (it's the red lettering at the very top)
Click to expand...
Click to collapse
ODIN Mode.
BladeRunner said:
When you boot into download mode what version does it say you are on? (it's the red lettering at the very top)
Click to expand...
Click to collapse
Odin Mode
Ive been trying to fix my Samsung S3 GT- I9300, stuck on Samsung Logo, when i go to android system recovery, i get alot of errors,starting with cant mount efs then followed by alot of red colored errors,data factory reset , wipe partitions, wipe cache is giving errors also, when i go to download mode and tried flashing thru Odin with stock firmware from sammobile using only the PDA/AP
I9300XXUGNA5_I9300OLBGNB1_I9300DXUGNB1_HOME.tar
but gives me this error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNA5_I9300OLBGNB1_I9300DXUGNB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Help!, i dont know what to do next.
zansan said:
Ive been trying to fix my Samsung S3 GT- I9300, stuck on Samsung Logo, when i go to android system recovery, i get alot of errors,starting with cant mount efs then followed by alot of red colored errors,data factory reset , wipe partitions, wipe cache is giving errors also, when i go to download mode and tried flashing thru Odin with stock firmware from sammobile using only the PDA/AP
I9300XXUGNA5_I9300OLBGNB1_I9300DXUGNB1_HOME.tar
but gives me this error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNA5_I9300OLBGNB1_I9300DXUGNB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Help!, i dont know what to do next.
Click to expand...
Click to collapse
Try flashing the latest TWRP through Odin. Download it from their website 2.8.6.1 in .tar format and flash. Then flash the stock firmware.