Phone had some messaging problem so i flash it with i9100 ICS Rom . But Odin gives me the after 70% of flashing
Rom used ... I9100XXLPQ_I9100OXXLPD_NEE ( ICs 4.0.3 )
please help me urgently . what should i do
Help . !!! anyone ?
aamszia said:
Help . !!! anyone ?
Click to expand...
Click to collapse
Have you tried to flash a different image?
another build?
USB Jig Samsung Galaxy S2
Get yourself "USB Jig Samsung Galaxy S2" of ebay... I just bought for 1.96. How to "make" (which you would not need thou) and use you will find on www galaxys2root dot com. Also will help you later if you want to remove yellow trianlge and flash count... hope this helps...
Rulandas said:
Get yourself "USB Jig Samsung Galaxy S2" of ebay... I just bought for 1.96. How to "make" (which you would not need thou) and use you will find on www galaxys2root dot com. Also will help you later if you want to remove yellow trianlge and flash count... hope this helps...
Click to expand...
Click to collapse
Well phone is going to download mode .. so need for Jtag .. by the way i am a champion in Jtag which is not needed here ..
i have downloaded this
M250S_HOME_M250S.UC08.1858_CL226872_REV02_user_low_ship_source.jkh.tar.md5
but
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> M250S_HOME_M250S.UC08.1858_CL226872_REV02_user_low_ship_source.jkh.tar.md5 is invalid.
<OSM> End...
Problem solved by reading this forum ..
Pit + Flash .
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XXLPQ_I9100OXXLPD_I9100XXLPQ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> param.lfs
<ID:0/003> Sbl.bin
<ID:0/003> zImage
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
Now Phone is ICS 4.0.3 Official
I9100XXLPQ_I9100OXXLPD_I9100XXLPQ_HOME.tar + u1_02_20110310_emmc_EXT4.pit
aamszia said:
Problem solved by reading this forum ..
Pit + Flash .
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XXLPQ_I9100OXXLPD_I9100XXLPQ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> param.lfs
<ID:0/003> Sbl.bin
<ID:0/003> zImage
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
Now Phone is ICS 4.0.3 Official
I9100XXLPQ_I9100OXXLPD_I9100XXLPQ_HOME.tar + u1_02_20110310_emmc_EXT4.pit
Click to expand...
Click to collapse
So this means you were successfully able to install a non korean stock (English Version) of i9100 ROM on M250 right?
Have it resolved the SMS issue? and this also means we can install any custom cooked ROM of i9100 on M250?
Would really appreciate if you could answer this because someone is selling me S2 M250 model so I just wanna know if Im not making a mistake.
craftsvision said:
So this means you were successfully able to install a non korean stock (English Version) of i9100 ROM on M250 right?
Have it resolved the SMS issue? and this also means we can install any custom cooked ROM of i9100 on M250?
Would really appreciate if you could answer this because someone is selling me S2 M250 model so I just wanna know if Im not making a mistake.
Click to expand...
Click to collapse
yes he Did and i tested it and it's Working OK no Problems but You Will Lose NFC
Related
I bought the device on my way to UK. Must ship device for warranty.
Device is SGS III blue started good and downloaded apps. after removing original sim and inserting US sim. phone start to heat restart and now stuck on samsung galaxy s III logo and restart again. Download mode works fine but wipe data V up+Home+Power doesnt work. Original Rom country code was XSG. Any idea?
I think I need full stock firmware not only .MD5 on Odin but CSC -Phone- PDA-Bootloader any International version.
As long as download mode working that means we safe are we?
Log
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXALE9_I9300OJVALE9_I9300XXLE8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> boot.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> recovery.img
<ID:0/003> modem.bin
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
Phone is 'bricked', and gets stuck on Samsung logo. How do I fix this? I'm trying to follow threads on how to get back to stock, but most of the links are dead - so if anyone can help, that would be great! When following some guides, I get the following error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI500_VZW_EH03_GB_CM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> param.lfs
<ID:0/003> Sbl.bin
<ID:0/003> boot.bin
<ID:0/003> recovery.bin
<ID:0/003> zImage
<ID:0/003> factoryfs.rfs
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!
Click to expand...
Click to collapse
lolreconlol said:
Phone is 'bricked', and gets stuck on Samsung logo. How do I fix this? I'm trying to follow threads on how to get back to stock, but most of the links are dead - so if anyone can help, that would be great! When following some guides, I get the following error:
Click to expand...
Click to collapse
If you're coming from ICS or CM7, you need pit file for re-partition.
jhssal said:
If you're coming from ICS or CM7, you need pit file for re-partition.
Click to expand...
Click to collapse
Ah! Thanks, worked that time.
hi guys,
i have an att note and was trying to root of odin
went through all the process, ODIN even Gave me the green light pass
and reboot the phone, its just that the phone came back on and never seem to pass the samsung screens
so ive decide to do a recover with CWM recovery i got this
and the phone stuck on the same screen and
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> cwm-touch-i717-120409.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/008> Added!!
<ID:0/008> Removed!!
<ID:0/008> Added!!
not sure if this help but in download menu i have custom binary yes (5counts)
guys please help, or did i fried my phone
thanks
Thread moved to Q and A - please post in accordance with XDA rules.
boot into the recovery you installed and wipe cache/dalvik
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Do you have a Canadian version of the note? If so you have to disconnect the phone from the pc as soon as Odin shows PASS, pull the battery from the phone, put the battery back in the phone and enter recovery with the vol + and - and the power button.
Hi all ,
So , I decided to put CM 12.1 on my GT-I9301I and i've stuck at one point for hours .
At first , I went thorugh all these steps slowly and precisely so i dont fail or anything .
The part where im stuck is that when in theory i installed TWRP through odin , my phone just loads up stock recovery all the time , no matter what . I tried CWM too and nothing changes .
Just so you know , of course i used 2nd method in here http://forum.xda-developers.com/show...99&postcount=2 .
Again i went slowly through all steps and even in odin everything went down good .
Mabye there is some hint in odin log :
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
But tbh i dont know what to do . Im stuck at it all day Thanks in advance
Did you resolved this? If not you may try boot into recovery by pressing and holding vol up and home right after flashing cwm/twrp and odin auto resets your phone
Guys I flashed my SM-G531H / DL whit this Fiemware (G531HVJU0APC2_G531HZTO0APC1_G531HUBU0APC1)
and now I have this problem,my Phone is brick can you tell me what Firmware can I use to Desbrick my phone?
thx in advance.
It say that After the flash with odin and this Rom
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> SPRDCP.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
pacoelo said:
Guys I flashed my SM-G531H / DL whit this Fiemware (G531HVJU0APC2_G531HZTO0APC1_G531HUBU0APC1)
and now I have this problem,my Phone is brick can you tell me what Firmware can I use to Desbrick my phone?
thx in advance.
Click to expand...
Click to collapse
Are you sure it is the correct firmware?
You can try this link i created a thread about fail after hidden.img but u can try the something instead of doing steps on hidden.img do for SPRDCP.img. if u dont understand ask me
https://forum.xda-developers.com/grand-prime/help/guide-odin-failed-flashing-stock-t3514810
Becareful
Maybe is baseband G531HUBUAOJ2