guys i have flashed this firmware from chu on my s4 zoom but i found that it didnt have google services on it. so i flashed again another firmware (baltic) it works well but the logo of chu still appear on boot though ive have cleared cache and formated in recovery.any 1 can help me here?andyes in recovery the product name has been changed from sm-c101 to sm-c101_CHN.
lethalzj said:
guys i have flashed this firmware from chu on my s4 zoom but i found that it didnt have google services on it. so i flashed again another firmware (baltic) it works well but the logo of chu still appear on boot though ive have cleared cache and formated in recovery.any 1 can help me here?andyes in recovery the product name has been changed from sm-c101 to sm-c101_CHN.
Click to expand...
Click to collapse
flash it with the original SM-C101 russian firmware (SER-C101XXUAMK4-20131126112124)
I did the same thing I flashed it with the CHU (Chinese Unicom ROM) and it changed my model number to SM-C101_CHN.
Related
dear friends
i have big problem with samsung galaxy s2 i9100 ,baseband version i9100ddke4, kernel version 2.635.7-i9100xwkf3-cl276555 [email protected] #2,
the problem is the phone is android locked,i temporarily unlocked it using android onclick pattern unlock ,then i reseted the phone using *2767*3855# but after reseting android lock is as it was,then i put the phone in recovery mode and reset it to factory state(formated the phone)when reboot nothing was changed ,then after i flashed the phone to 4.03 version using odin successfully flashed and rebooted nothing was changed,then again flashed the phone using other boxes(z3x, octopus) nothing changed,i tried to downgrade the phone, it flashed but nothing changed ,phones kernel version fw version everything same condition, ,please help me.
new_bro said:
dear friends
i have big problem with samsung galaxy s2 i9100 ,baseband version i9100ddke4, kernel version 2.635.7-i9100xwkf3-cl276555 [email protected] #2,
the problem is the phone is android locked,i temporarily unlocked it using android onclick pattern unlock ,then i reseted the phone using *2767*3855# but after reseting android lock is as it was,then i put the phone in recovery mode and reset it to factory state(formated the phone)when reboot nothing was changed ,then after i flashed the phone to 4.03 version using odin successfully flashed and rebooted nothing was changed,then again flashed the phone using other boxes(z3x, octopus) nothing changed,i tried to downgrade the phone, it flashed but nothing changed ,phones kernel version fw version everything same condition, ,please help me.
Click to expand...
Click to collapse
Flash the rom using CWM not odin and tell me what happens
Sent from my Toaster using Tapatalk 2
Hello all,
due to some temporary crazyness I flashed a non-compatible ROM on my S2.
No worries I thought, just get the Samsung firmware, flash with Odin - get back to factory original, reinstall my previous CWM image and all is good.
So: I downloaded the file "I9100MUGLD3_I9100MBMCLD3_BMC" from the SamMobile website ( this is the Bell version), flashed with Odin.
All went fine. But when restarting the phone, it says on the Galaxy 9100 screen - for hours and hours, and never starts.
Flashed again (same file) - same result.
So my phone is not totally dead, as I am able to flash it - but something does not work.
Should I have used a different firmware from SamMobile - maybe this one: I9100MUGLD3_I9100MBMCLD3_VMC?
Please help as I am somewhat stuck here...
Thank you all.
Gadgetguy2005 said:
Hello all,
due to some temporary crazyness I flashed a non-compatible ROM on my S2.
No worries I thought, just get the Samsung firmware, flash with Odin - get back to factory original, reinstall my previous CWM image and all is good.
So: I downloaded the file "I9100MUGLD3_I9100MBMCLD3_BMC" from the SamMobile website ( this is the Bell version), flashed with Odin.
All went fine. But when restarting the phone, it says on the Galaxy 9100 screen - for hours and hours, and never starts.
Flashed again (same file) - same result.
So my phone is not totally dead, as I am able to flash it - but something does not work.
Should I have used a different firmware from SamMobile - maybe this one: I9100MUGLD3_I9100MBMCLD3_VMC?
Please help as I am somewhat stuck here...
Thank you all.
Click to expand...
Click to collapse
What are you using to flash? If you can flash then it's not bricked
http://forum.xda-developers.com/showthread.php?t=1994313
Gadgetguy2005 said:
Hello all,
due to some temporary crazyness I flashed a non-compatible ROM on my S2.
No worries I thought, just get the Samsung firmware, flash with Odin - get back to factory original, reinstall my previous CWM image and all is good.
So: I downloaded the file "I9100MUGLD3_I9100MBMCLD3_BMC" from the SamMobile website ( this is the Bell version), flashed with Odin.
All went fine. But when restarting the phone, it says on the Galaxy 9100 screen - for hours and hours, and never starts.
Flashed again (same file) - same result.
So my phone is not totally dead, as I am able to flash it - but something does not work.
Should I have used a different firmware from SamMobile - maybe this one: I9100MUGLD3_I9100MBMCLD3_VMC?
Please help as I am somewhat stuck here...
Thank you all.
Click to expand...
Click to collapse
Try wiping data after flashing Original FW. Sometimes it works for me... Also U hav international S2 or network locked??
The firmware you've selected seems to be perfectly all right. If you can still boot into recovery and download mode, you can try flashing a different Stockrom (non canadian/virgin) just for checking your phone situation, but make sure its compatible with your i9100.
If that does not work, most probably you've messed up your Bootloader
Best of luck. Let us know how it goes !
kazi_rizwan said:
The firmware you've selected seems to be perfectly all right. If you can still boot into recovery and download mode, you can try flashing a different Stockrom (non canadian/virgin) just for checking your phone situation, but make sure its compatible with your i9100.
If that does not work, most probably you've messed up your Bootloader
Best of luck. Let us know how it goes !
Click to expand...
Click to collapse
Thank you all. How do I fix my bootloader? The unit is booting after I flash the default firmware, I see the android character for a while - but then stays for ever on Samsung Galaxy SII screen...
I use the default settings in ODIN - should I maybe use other settings (re-partition?)
Update: I flashed Siyahkernel - and was able to get into CWM. With CWM I was able to restore my CWM backup - all is good now.
I just would like to know: what is the "SAFE" method for installing JellyBam?
Gadgetguy2005 said:
Update: I flashed Siyahkernel - and was able to get into CWM. With CWM I was able to restore my CWM backup - all is good now.
I just would like to know: what is the "SAFE" method for installing JellyBam?
Click to expand...
Click to collapse
Go to Cwm:
-wipe data/factory reset
-wipe cache
-wipe dalvik cache (under advanced)
-format system (under mounts and storage)
-install JellyBam zip file
-enjoy
Sent from my GT-I9100
I was runing on lollipop 5.1.1 official with no problem
2 days ago the MM reached for me from samsung (updates from mobile ) since I updated it did adn well
after iti's finished I found myself stuck on bootloop
sometimes after the logo and sometimes after I use the mobile for a while
my void was 0 I tried a kernal but didn't work
and I lose my warranty
then I flashed another offfical stock rom from sammobile but problem still existed restarting the mobile as mentioned
help me with this killing problem pls
thanks all
Any solution please ?
Yaqoubi said:
Any solution please ?
Click to expand...
Click to collapse
Shouldn't have tried a kernel if you wanted to keep Knox 0.
Simply a reinstall of the room via Odin should have solved. Need to wipe and then reinstall via Odin now.
man, I tried all the software probabilities
changed the kernal
and get it back to the stock one
flashed a stock roms in many versions (MM and lollipop) from sammobile
nothing did work for me !!
this is the fourth day trying to solve it with no result !!
You haven't said if you wiped cache from recovery. Even with boot loop should be able to get into recovery http://thedroidguy.com/2015/06/how-to-get-samsung-galaxy-s6-edge-out-of-boot-loop-107653
anyone found a solution for this problem ?
Yaqoubi said:
anyone found a solution for this problem ?
Click to expand...
Click to collapse
Have you looked at the article I sent? It should help you recover from bootloop
yes, I did looked, but nothing changed it didn't help me
hello i have buy my phone juste 1 week past and directly when phone have enabled received update to 6.0.1 and all work fine
now boot loop are from an conflict in your rom ( old data with new one ) as i have see user have give you corect solution for comeback your phone juste wip data and reflash directly 6.0.1 rom .
let know if solved
I wiped data, cach and reset factory setting then flashed MM 6.0.1
and did it another time wiped everything then flashed lollipop 5.1.1
I delted every single file belongs to me on the phone
the problem is I falshed the stock ROMs and tried every possible software issue
nothing works !!
but nothing works !!
Yaqoubi said:
I wiped data, cach and reset factory setting then flashed MM 6.0.1
and did it another time wiped everything then flashed lollipop 5.1.1
I delted every single file belongs to me on the phone
the problem is I falshed the stock ROMs and tried every possible software issue
nothing works !!
but nothing works !!
Click to expand...
Click to collapse
Where are you based? You could send to Samsung as you can say it failed during flash.
Have you tried smart switch? And 5.1.1 over 6.0.1 will cause headaches.
After odin flash go into recovery and factory reset. Sometimes it helps.
Sent from my SM-N920C
hi. i've flashed official 4.4 via odin in my Samsung Galaxy S3 (i9305). but it stucks on WELCOME screen. Welcome screen is screen which appears after SAMSUNG logo, from where i can select language and access accessibility settings. i tried different custom roms too but phone stucks on WELCOME screen (basically setup screen). I can't move further because everytime i restart or flash new rom it stucks.
any idea how to get rid of this.
REMEMBER: it's not bootloop error. Phone boots properly but after the SAMSUNG logo on the set up screen (which i'm calling WELCOME screen) it stuck.
Have you done a factory reset in recovery mode, after flashing the rom via odin?
rodman01 said:
Have you done a factory reset in recovery mode, after flashing the rom via odin?
Click to expand...
Click to collapse
Yes, i did.
The main problem i was facing is that after flashing custom rom there was null imei and UNKNOWN baseband version. Then i install hyper rom but didn't helped. Then i install omni 4.4 rom but didn't help. Then i flashed N4Elite rom but stuck on welcome screen... Then i download official firmware but still stuck at welcome screen.
Did you perform a factory reset after flashing the latest stock ROM using stock recovery as suggested by @rodman1 ?
audit13 said:
Did you perform a factory reset after flashing the latest stock ROM using stock recovery as suggested by @rodman1 ?
Click to expand...
Click to collapse
Yes. But didn't worked
Maybe the phone needs to be flashed with a pit file too?
audit13 said:
Maybe the phone needs to be flashed with a pit file too?
Click to expand...
Click to collapse
Kindly guide me. Right now I've 2 issues:
1: Null imei/unknown baseband version.
2: stuck on welcome screen.
Kindly send the links of official firmware (you suggest) and pit file.
Is there any Modem.bin file which will resolve my Null imei issue if flashed ?
*I'm from Pakistan so choose firmware according to my region.
Thanks in advance.
Can't find firmware for the gt-i9305: https://www.sammobile.com/firmwares/galaxy-s-/GT-I9305/
audit13 said:
Can't find firmware for the gt-i9305: https://www.sammobile.com/firmwares/galaxy-s-/GT-I9305/
Click to expand...
Click to collapse
I've searched about country code. On a xda forum i found that south africa, pakistan, algeria, oman, kuwait etc have same code. I think South African based (vodafone) will be suitable. Although my uncle sent this i9305 from south africa.
Maybe you can find some help in the S3 African thread or ask there?
https://forum.xda-developers.com/search.php?searchid=447035869
In i9305 section I haven't found much infos, if I search for south africa and/or pakistan.
Otherwise I would try an other samsung stock version, and than its try and error. In i9305 section is also a thread with several modems, there you can also download and try different possibilities.
Edit just to make clear: modems for the i9300 won't work with the i9305
Edit2: there are 2 vodafone versions for South Africa on sammobile.....see attached
rodman01 said:
Maybe you can find some help in the S3 African thread or ask there?
https://forum.xda-developers.com/search.php?searchid=447035869
In i9305 section I haven't found much infos, if I search for south africa and/or pakistan.
Otherwise I would try an other samsung stock version, and than its try and error. In i9305 section is also a thread with several modems, there you can also download and try different possibilities.
Edit just to make clear: modems for the i9300 won't work with the i9305
Edit2: there are 2 vodafone versions for South Africa on sammobile.....see attached
Click to expand...
Click to collapse
I'm downloading 4.3 (first one-XFV)... I'll let you know about this new stock rom.
I tried to flash stock rom(soith african) via odin but couldn't flash. Odin is giving red error FAILED!.... I tried the same file which i flashed 3 days ago, at that time it was successful but today it's getting failed. Why is it so?
Help!!!
Post the Odin log so we can see the exact error.
If you can still access download mode you need to flash the latest stock i9305 firmware. Stock firmware is the only way.
**The biggest tip I can give you is to flash the stock firmware, boot to recovery, factory reset, flash stock firmware AGAIN. This makes sure any old remnants are obliterated from memory, forcing all partitions to be reflashed. **
If you cannot access download mode then you will have to try the kies method. Don't hold your breath as you can still be sorely disappointed. It will be nothing short of a miracle if we get this phone booted ever again.
Good luck!.
Thank you all guys.
Bisically i was facing two issues at a time.1:Stuck on Welcome screen. 2:Null imei/unknown baseband versiin. MY ISSUES ARE RESOLVED NOW and my phone is working fine. Here are those steps i performed:
1: Downloaded official firmware according to my region (south africa based for me).
2: This room contained sboot.bin file and odin was not able to flash this file and was giving error. So i just extracted whole .tar file(official firmware ****.tar). Deleted this SBOOT.BIN file and again packed all file (excluding sboot.bin) into .tar file.
3: Flashed this modified .tar via odin.
4: This time process was successful and no error in flashing.
5: On restart my phone was stuck on White samsung logo not the blue one. On research i found that PARAM.BIN file is missing which is responsible for all logos and images etc.
6: So i downloaded this file for my i9305. Extracted the .tar file again. Copy paste this PARAM.BIN in folder where i extracted files and after that packed all file in .tar file.
7: Flashed again via odin. Flash was successful as well as white samsung logo issue was resolved. But now phone stuck on Blue samsung logo (bootloop).
8: For bootloop issue, i put my phone in recovery mode using Home+Volume up+Power button simultaneously.
9: Performed Wipe Cache, Factory Reset and Restart.......... Et Voila ..... My phone is working fine now. No bootloop and this also resolved my NULL IMEI issue as well. :good:
Hi everyone,i am asking for your help i am noob at this. So i wanted to install a custom rom on my s9+ (Pixle Expirience),after using the rom i installed a random android pie kernel,then the rom woudnt boot.So i installed a normal custom rom that i knew it worked.I flash that but i didint have mobile data and i coudnt see my IMEI and my flight mode was plain blue instead of gray(but my wifi worked like everything elese).Then i installed stock firmware via odin,still nothing.
Then i panic and found some software which with u can insert your IMEI,but i have accidentally wiped my efs.So now when i install firmware it is stuck at samsung logo,and in TWRP it says failed to mount /efs Invalid argument.So i ask u if u can guide me on what to do and how to get efs file.Your help is appreciated.Thank you
Did you wipe the date with the csc file while flashing your firmware with odin?
danlivesey said:
Did you wipe the date with the csc file while flashing your firmware with odin?
Click to expand...
Click to collapse
Same problem with me phone works but network issue