hallow
my sm-n900p dead when playing with efs ...detecting qulecomm device in pc there are many unbrick image in forum i triead many of them but set is not on ..so if any on can make working image for me its very helpful for me
thanks
its very urgent
cdma-india said:
hallow
my sm-n900p dead when playing with efs ...detecting qulecomm device in pc there are many unbrick image in forum i triead many of them but set is not on ..so if any on can make working image for me its very helpful for me
thanks
its very urgent
Click to expand...
Click to collapse
Is the phone able to get into download mode? Is the phone detected in Odin?
no its not going to download mode , tried with boot jig also nowdownload,no recovery ,no boot , 100% boot dead i have all gagjets for repair dead boot riff,easy jtag ..many more but no one support n900p only solution is now unbrick sd card image
wating
thanks
just making thread up...some one please
here is method how to creat unbrick image plz try and upload to any safe place ,it require working n900p handset with cwm install
http://forum.xda-developers.com/showthread.php?t=2624203
How do you intend to write an img if the device won't go into download mode, recovery, or boot for that matter? Maybe look into returning your phone.
Anthonicia said:
How do you intend to write an img if the device won't go into download mode, recovery, or boot for that matter? Maybe look into returning your phone.
Click to expand...
Click to collapse
He doesn't need to boot into there to use a recovery sdcard. Me, @noobtoob, @msmercy42, and others (very sorry for those I forgot to mention, I have a very limited memory!!!) took tricks that the N900A guys got for a hard brick solution and came up with one for the N900T. Now, we're assuming this can be ported out to all other N900X variants but this still has yet to be tested. It involves grabbing about 200MB from mmcblk0 and writing it to an sd card. Not just copying it, but doing a raw write of the image file to an sdcard via the dd if command in either terminal emulator or a Linux OS environment.
If someone here has a N900P, I'd be glad to walk them through the process of creating a unbrick image for the OP. It copies over bootloader information to boot from the SD card, not the device. NO SENSITIVE EFS INFORMATION IS COPIED!!! This method has been done enough times to say that at least. .
OP: when you plug your device into your computer do you at least get a QCHSUSB port or the notification that a device has been recognized by Windows? If so, this method should work. If not, you may have a hardware fault.
Sent from my SPH-L900. Please hit the thanks button if I helped you out!
I will do it since I'm here already. Have to go to the post office but will be back and ready in about an hour. What all do I need to have?
Anthonicia said:
I will do it since I'm here already. Have to go to the post office but will be back and ready in about an hour. What all do I need to have?
Click to expand...
Click to collapse
thanks man
u required
1)working n900p handset with cwm installed
2)download
http://forum.xda-developers.com/show....php?t=2624203 (Unbrick-Creator)
3)run via cwm
4)software will creat one image file
5)send link of that file
as simple as it is
Just waiting for it to upload and I will pm you a link.
thanks man
u required
1)working n900p handset with cwm installed
2)download
http://forum.xda-developers.com/show....php?t=2624203 (Unbrick-Creator)
3)run via cwm
4)software will creat one image file
5)send link of that file
as simple as it is
Sent it to u via pm. Let us know if it works.
Wow work in first shot u r great
thanks again
u saved my phone
That's great! Glad to help.
Why not post so everyone can have the image in case of brick? I've been looking for this to have as a backup just in case
Sent from my SM-N900P using xda app-developers app
evilvoice said:
Why not post so everyone can have the image in case of brick? I've been looking for this to have as a backup just in case
Click to expand...
Click to collapse
You can make your own if you follow the link op posted in his instructions.
So...will SOMEONE post a working image? Lol. I don't have a N900P but I'd like to keep a running archive of unbrick images (in addition to space hogging firmwares) in my mediafire account to post links to. This way it'll keep the consistency of image size and contents; and most importantly people won't need to wait for it to be generated/uploaded.
Sent from my SPH-L900. Please hit the thanks button if I helped you out!
ecs87 said:
So...will SOMEONE post a working image? Lol. I don't have a N900P but I'd like to keep a running archive of unbrick images (in addition to space hogging firmwares) in my mediafire account to post links to. This way it'll keep the consistency of image size and contents; and most importantly people won't need to wait for it to be generated/uploaded.
Sent from my SPH-L900. Please hit the thanks button if I helped you out!
Click to expand...
Click to collapse
I cannot upload the actual file because it is too big (52mb). I sent you a pm. If you can upload it to a file share site and post it here that's cool. Just don't like uploading it from personal dropbox, they don't like me posting files to public sites for some reason.
Anthonicia said:
I cannot upload the actual file because it is too big (52mb). I sent you a pm. If you can upload it to a file share site and post it here that's cool. Just don't like uploading it from personal dropbox, they don't like me posting files to public sites for some reason.
Click to expand...
Click to collapse
I had a Derpbox before. Hated it. Ran out of bandwidth within the first week of posting the L900 MK4 Odin file...psch. Switched to Mediafire and never looked back. Thanks for the file by the way. Got it hosted and here it is: https://www.mediafire.com/?8bruhax81uud9dj
Please need some help hard bricked and soft bricked
Hi guys I'm trying to unbrick my galaxy note 3 on mj4 I used above image had to add the .tar.img anyways I wrote it to a 8gb sd card and also a 64gb sd card both didn't work my phone is hard bricked and hard bricked because it stays stuck on the Samsung galaxy note 3 screen and when going in to recovery it says what the OP said and then mine keeps trying to root the phone with cf auto root every time I got lol in to recovery it does the same thing when I go in to download mode my computer doesn't recognize it I think it said unrecognized device so I can't flash anything with Odin any help is much appreciated as well as a donation
Related
hey guys, i have no clue what happened. i havent fooled around and fiddled with my HDX 8.9 in months. i rooted it in december and installed safestrap last month (but i didnt use it. i only installed safestrap in anticipation of a rom) and out of the blue my kindles wifi stopped working yesterday. i decided to restart it bc thats the ultimate fix for all electronics but now its stuck on the animated kindle fire boot logo. ADB works and i can also boot into fastboot. Thats where my knowledge ends. i dont have the knowledge you guys have and i have googled this for the past 3 hoours but to no avail. i would find other help on other devices but i dont wanna risk ruining my hdx even more by trying another devices fix.
can anyone tell me how to recover from adb. i tried this:
http://forum.xda-developers.com/showthread.php?t=2530623
and it just booted me into fastboot and i would use this command: "fastboot -w -i 0x1949" and that doesnt do anything. androidcowboy seemed to have some problems with that method too, so im skeptical. is there someway to push a unmodified firmware and get stock back?? ill provide any more info you guys need. a quick step by step or a link to somebody elses page would be awesome!! a cookie to the best helper! :highfive:
PS i should also mention that i can in fact boot into safestrap. however, my backup does not appear. my internal storage in safestrap says 0mb. is my internal sdcard not mounting for a reason?
please help!
gutts10 said:
hey guys, i have no clue what happened. i havent fooled around and fiddled with my HDX 8.9 in months. i rooted it in december and installed safestrap last month (but i didnt use it. i only installed safestrap in anticipation of a rom) and out of the blue my kindles wifi stopped working yesterday. i decided to restart it bc thats the ultimate fix for all electronics but now its stuck on the animated kindle fire boot logo. ADB works and i can also boot into fastboot. Thats where my knowledge ends. i dont have the knowledge you guys have and i have googled this for the past 3 hoours but to no avail. i would find other help on other devices but i dont wanna risk ruining my hdx even more by trying another devices fix.
can anyone tell me how to recover from adb. i tried this:
http://forum.xda-developers.com/showthread.php?t=2530623
and it just booted me into fastboot and i would use this command: "fastboot -w -i 0x1949" and that doesnt do anything. androidcowboy seemed to have some problems with that method too, so im skeptical. is there someway to push a unmodified firmware and get stock back?? ill provide any more info you guys need. a quick step by step or a link to somebody elses page would be awesome!! a cookie to the best helper! :highfive:
PS i should also mention that i can in fact boot into safestrap. however, my backup does not appear. my internal storage in safestrap says 0mb. is my internal sdcard not mounting for a reason?
please help!
Click to expand...
Click to collapse
did you use the normal usb calbe to boot into fastboot mode? or you were using a special usb cable?
if you can boot into safesatrap, then your hdx is not a brick at all ,you can fix it in safestrap ,try to google the ways using the SS.
goodayoo said:
did you use the normal usb calbe to boot into fastboot mode? or you were using a special usb cable?
if you can boot into safesatrap, then your hdx is not a brick at all ,you can fix it in safestrap ,try to google the ways using the SS.
Click to expand...
Click to collapse
thanks for response. i was using a normal cable. are you sugesting that i load amazons official firmware over my stock partition through SS? this is why i was asking because this is what it seems google say to do. i was planning on doing that but i didnt want to mess my device up more so thats why i was asking. i was thinking of creating a slot and installing stock firmware on it and see if it was safe but because my internal storage doesnt mount and shows up as 0mb i was unable to create a slot and load the firmaware.
please be a little more specific as to what i should be googling and i will gladly do it. i hate asking questions in forums bc i dont want to be that guy who takes peoples time up for a simple solutioin but the truth is that i looked everywhere before i asked the question. i have a couple of methods i would like to use but i dont know which one is the right one and the safest one. im leaning towards reloading stock amazon firmware into the stock slot on SS.
thanks again and sorry for being a pain. im a noob compared to most of you guys but believe it or not im quite tech saavy.
anybody toss me a clue please. should i go ahead a flash stock rom? i went to dl stock rom from http://www.amazon.com/gp/help/customer/display.html/ref=hp_left_v4_sib?ie=UTF8&nodeId=201357220 and it was a .bin. should i rename it to a zip? also, the file i downloaded is 488mb however when it downloaded it said it was supposed to be 795mb. i dled it twice and it came out 488 both times. can somebody give me a md5 of their update so i know i have a proper file. sorry to sound desperate but i need answers. :fingers-crossed:
thanks y'all
My copy of update-kindle-14.3.1.0_user_310079820 is 794 MB.
MD5 : 0F2BC5278C057E7A6B4823B0F68D0727
It looks like you've got a bad copy
gutts10 said:
anybody toss me a clue please. should i go ahead a flash stock rom? i went to dl stock rom from http://www.amazon.com/gp/help/customer/display.html/ref=hp_left_v4_sib?ie=UTF8&nodeId=201357220 and it was a .bin. should i rename it to a zip? also, the file i downloaded is 488mb however when it downloaded it said it was supposed to be 795mb. i dled it twice and it came out 488 both times. can somebody give me a md5 of their update so i know i have a proper file. sorry to sound desperate but i need answers. :fingers-crossed:
thanks y'all
Click to expand...
Click to collapse
Try this http://goo.im/devs/Hashcode/apollo//apollo-amazon-os-14.3.1.0.zip
Sent from my LG-V500 using xda app-developers app
ptrsnshane said:
Try this http://goo.im/devs/Hashcode/apollo//apollo-amazon-os-14.3.1.0.zip
Sent from my LG-V500 using xda app-developers app
Click to expand...
Click to collapse
great... thanks to you guys. now should i just go ahead and push it through adb and flash it?? does it matter that internal storage doesnt mount in SS?
thanks again
gutts10 said:
great... thanks to you guys. now should i just go ahead and push it through adb and flash it?? does it matter that internal storage doesnt mount in SS?
thanks again
Click to expand...
Click to collapse
I have only installed it on a rom slot. It worked like it should but in your case I'm not sure.
Sent from my LG-V500 using xda app-developers app
ptrsnshane said:
I have only installed it on a rom slot. It worked like it should but in your case I'm not sure.
Sent from my LG-V500 using xda app-developers app
Click to expand...
Click to collapse
ok ill give it a go first thing tomo... ill let you know how it goes. thanks again.
Hi,
Don't know what happen, why, and what to do, if possible.
I run the last LiquidSmooth version since it's able, no more change, no kernel.
This morning, no problem, some sms, phone calls, play with internet, a normal day in fact. And there are two hours, Idecided to call my wife : no lockscreen, just a blackscreen. So I decided to reboot but nothing. No boot logo, no words, NOTHING. I can't go into recovery or download mode.
Just in case I've ordered a new battery (but the last time I see my battery level this morning there was even more than 60%), but waiting the delivered new one, somebody has an idea? A new battery could help me?
I've tried to charge but nothing (no led, no scrren wake on). I've tried to connect to computer : it search an update for driver : it's writen : "QHSUSB_DLOAD" and after a while it says that no driver can be found. No odin no kies.
Any idea of what happened, or if anyhting is possible (can't buy a new phone).
Thanks
http://forum.xda-developers.com/showthread.php?t=2600869
Sent from my GT-I9205 using Tapatalk
Silesh.Nair said:
http://forum.xda-developers.com/showthread.php?t=2600869
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
really really thanks. I read a lot of differents threads, even considering another phone I don't own, and I thought I've read enough. I'd tried this when back home . thanks again.
Vous êtes bienvenus!!!
Let me know of you need the debrick.IMG. I have one for the I9200. I9205 debrick.img is available in the thread I posted above.
Sent from my GT-I9205 using Tapatalk
So I've read thread, see videos. Now I'm waiting that my pc (which is as fast as a turtle ) backup my sdcard.
I have downoload win32 item and extract.But for debrick.img, the link in first post is not avaible. I've found another file few posts after but it's a *.img.tar file. I am right if I unzip it ? The *.img inside is good to use?
Thanks for the time you spent for me.
Mukiai said:
So I've read thread, see videos. Now I'm waiting that my pc (which is as fast as a turtle ) backup my sdcard.
I have downoload win32 item and extract.But for debrick.img, the link in first post is not avaible. I've found another file few posts after but it's a *.img.tar file. I am right if I unzip it ? The *.img inside is good to use?
Thanks for the time you spent for me.
Click to expand...
Click to collapse
I am uploading it to my mega account. check under DEBRICK/I9205 folder. Should take about 30 minutes to upload. You can also extract the debrick.img from the tar file.
so I've test with your file but doesn't work. I've also tried with the one in the thread , nothing too.
In fact the phone boot but not totaly as it's supposed to do. I press power button then vibrate and then the logo doesn't appear but there is this screen :
Code:
[COLOR="Lime"]BOOT RECOVERY MODE[/COLOR]
CHECK BOOT PARTITIONS. .
COPY FROM T-FLASH. .
WRITE 139008 sectors. .
[COLOR="Red"]FLASH WRITE FAILURE[/COLOR]
ddi : mmc_read failed
[COLOR="red"]ODIN MODE[/COLOR]
PRODUCT NAME: GT-I9205
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
[COLOR="Gray"]QUALCOMM SECUREBOOT: ENABLE
BOOTLOADER AP SWREV: 1[/COLOR]
----------------------------------------
I can't go into any mode (download or recovery), just boot to the screen above.
I've tried to "ODIN" a firmware ( I9205XXUAMG7_I9205XEFAMG1_I9205XXUAMG5_HOME.tar.md5 that I had on pc ) : when plug phone it tells me "added" with blue item (so normal no ? ), *.md5 = good analysis. But when I click on start it tells me that I miss PIT file
Well, you may need to repartition using a I9205 pit file and then try flashing stock rom using Odin. Check with @ValenteL, He's good with things technical. He can provide you with a .pit file too.
Silesh.Nair said:
Well, you may need to repartition using a I9205 pit file and then try flashing stock rom using Odin. Check with @ValenteL, He's good with things technical. He can provide you with a .pit file too.
Click to expand...
Click to collapse
A lot of thanks, I go to see with @ValenteL.
Mukiai said:
A lot of thanks, I go to see with @ValenteL.
Click to expand...
Click to collapse
Did you suxses yet...
Sent from my GT-I9205
shazzl said:
Did you suxses yet...
Sent from my GT-I9205
Click to expand...
Click to collapse
No success yet . I've request him here with a little more explanations I think.
When it happened to you, did you have same problems?
Mukiai said:
No success yet . I've request him here with a little more explanations I think.
When it happened to you, did you have same problems?
Click to expand...
Click to collapse
@Mukiai
if the brick.img create by @ValenteL you shuld used CML1 stock firmware.
If not working you shuld search help from xda member that have the same baseband to flash the brick.img creator and try to flash the same baseband if bmg2 it must be bmj2...
some one have pm me about his brick ths fone I ask for the baseband but the guy don't know...
Then I gave him the brick.img the when re start it stuck at samsung boot logo... I ask him to flash clm1 Stock baseband then the guy just quite.... I don't know it boot or not...check my thread solved hard brick
Sent from my GT-I9205
shazzl said:
@Mukiai
if the brick.img create by @ValenteL you shuld used CML1 stock firmware.
If not working you shuld search help from xda member that have the same baseband to flash the brick.img creator and try to flash the same baseband if bmg2 it must be bmj2...
some one have pm me about his brick ths fone I ask for the baseband but the guy don't know...
Then I gave him the brick.img the when re start it stuck at samsung boot logo... I ask him to flash clm1 Stock baseband then the guy just quite.... I don't know it boot or not...check my thread solved hard brick
Sent from my GT-I9205
Click to expand...
Click to collapse
I've seen it but he didn't reply you, no? maybe he answer you by PM.
I don't know if bmj2 or not. I've several firmware on pc and can't remember the last I flash (when phone ran well ) than i flashed some custom rom (in fact all cm11, BS, Mokee, etc, etc, until I flash latest LisuidSmooth. As it run well I just keep it (waiting the version of BS that @Silesh.Nair make able today... arghhhhh ).
So, I'm little disappointed.
Where did you get the brick.img
Sent from my GT-I9205
shazzl said:
Where did you get the brick.img
Sent from my GT-I9205
Click to expand...
Click to collapse
The link from your first post in your thread didn't work so i've tried with one few posts later. And also test with one from @Silesh.Nair. I tested with two differents sd . The two are 16go : one class4 and one class 10.
Is it normal that after use win32 item , the properties of my sd says that the size is in mb (near 16 mb are free and 47 mb are usedand capacity total 64mb : a deep hole from 16gb???? )?
in attachment : files on sd after win32 item : just one folder named "/image" and inside there are those files on screenshots.
Try to flash CML1 FRAMEWARE...
shazzl said:
Try to flash CML1 FRAMEWARE...
Click to expand...
Click to collapse
I have to wait some hours that it downloads
wainting, i'll try @ValenteL answer
Mukiai said:
Is it normal that after use win32 item , the properties of my sd says that the size is in mb (near 16 mb are free and 47 mb are usedand capacity total 64mb : a deep hole from 16gb???? )?
Click to expand...
Click to collapse
It's normal. The sdcard have 17 partitions but the windows only see the first from 64 MB. 16 are hidden for windows.
You can see them on Control Panel / Admnistrative Tools / Computer Management / Storage / Disk Management (local) ...
and here You see the sdcard, may be F: whit 17 partitions.
Power off on Mega, put the sdcard, Power and must be something to work on it. It write the first 128 MB from emmc, pit file included. And use the guide from @shazzl .
Here I can't help more because I never had a hard brick and not make all process. I made only the sdcard to debrick and analyzed it on Pc.
ValenteL said:
It's normal. The sdcard have 17 partitions but the windows only see the first from 64 MB. 16 are hidden for windows.
You can see them on Control Panel / Admnistrative Tools / Computer Management / Storage / Disk Management (local) ...
and here You see the sdcard, may be F: whit 17 partitions.
Power off on Mega, put the sdcard, Power and must be something to work on it. It write the first 128 MB from emmc, pit file included. And use the guide from @shazzl .
Here I can't help more because I never had a hard brick and not make all process. I made only the sdcard to debrick and analyzed it on Pc.
Click to expand...
Click to collapse
I'm so bad didn't think about this elementary thing (for partitions not seeing)
I made it, tried severals times, with different sd, but everytime same thing. @Silesh.Nair gave me that links to @shazzl then purpose me to contact you. I've tried after reading and see video. But without the same success.
Mukiai said:
I'm so bad didn't think about this elementary thing (for partitions not seeing)
I made it, tried severals times, with different sd, but everytime same thing. @Silesh.Nair gave me that links to @shazzl then purpose me to contact you. I've tried after reading and see video. But without the same success.
Click to expand...
Click to collapse
Dose it boot yet..
Sent from my GT-I9205 using xda app-developers app
Q&A for Elephone P6000 mtk6732 64bit SP Flash Tool
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Elephone P6000 mtk6732 64bit SP Flash Tool. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
SPFlashtooll Elephone P6000
Please, write me how did you backup firmware Elephone P6000?
The OP has been updated so Please review this Many Thanks to all
no really noob...
Hi bigrammy,
i can´t brick my phone you know, and i have used any time tools like SP Flash Tool, send me please a link to you files and i will make a first test after i have check any files 1to1 to my files i have read out.
regards
TM
video tut on youtube
See main post for links Enjoy.
Questions to this thread.
sawok said:
Hi bigrammy,
i can´t brick my phone you know, and i have used any time tools like SP Flash Tool, send me please a link to you files and i will make a first test after i have check any files 1to1 to my files i have read out.
regards
TM
Click to expand...
Click to collapse
TUT Main post.
good news , but
Hi bigrammy, or anybody else,
can you send me your Backup, my P6000 need this one for unbricking.....
THX
sawok said:
Hi bigrammy, or anybody else,
can you send me your Backup, my P6000 need this one for unbricking.....
THX
Click to expand...
Click to collapse
Do you know what gets encrypted exactly You will need to be specific so do some research first :good:
If I were you I would just return it to Elephone because your problem is their fault 100% and not many will share their userdata normally
See this thread HERE maybe this is the same problem you have.
Ok
bigrammy said:
Do you know what gets encrypted exactly You will need to be specific so do some research first :good:
If I were you I would just return it to Elephone because your problem is their fault 100% and not many will share their userdata normally
See this thread xxx maybe this is the same problem you have.
Click to expand...
Click to collapse
have read this...
Hi, i understand, it is long time and much money for sending the phone from germany to china and back, i hoped , you have i clean backup without any personality data of you .
Perhaps you can send system.img i flash it with your scatter.txt and i test it help or not?
Can i upload my parts of *.img that i have read out, and you can see wich part is need to reflash ?
TM
sawok said:
have read this...
Hi, i understand, it is long time and much money for sending the phone from germany to china and back, i hoped , you have i clean backup without any personality data of you .
Perhaps you can send system.img i flash it with your scatter.txt and i test it help or not?
Can i upload my parts of *.img that i have read out, and you can see wich part is need to reflash ?
TM
Click to expand...
Click to collapse
Ok try to boot to recovery using adb.
1. Start MTKDroid tools.
2. Push the adb button on the bottom right corner of droid tools
3. start your phone while connected to the pc
4. watch to see if droid tools loads your phone info :fingers-crossed:
5. If it does go to the adb command prompt and enter.
Code:
adb reboot recovery
Wipe everything you can from the options in recovery.
It can take a while so go have a cup of tea.
:fingers-crossed:
hmmm
bigrammy said:
Ok try to boot to recovery using adb.
1. Start MTKDroid tools.
2. Push the adb button on the bottom right corner of droid tools
3. start your phone while connected to the pc
4. watch to see if droid tools loads your phone info :fingers-crossed:
5. If it does go to the adb command prompt and enter.
Code:
adb reboot recovery
Wipe everything you can from the options in recovery.
It can take a while so go have a cup of tea.
:fingers-crossed:
Click to expand...
Click to collapse
Yes i do that yesterday with the same result and read out over adb :boot.img, cache.img, lk.bin, logo.bin, preloader.bin, recovery.img, secro.img, system.img, userdata.img and proc/partinfo, that shows the memory mapping same as in your scatter.txt, i have check it in MTKDroid Tools.
now i wisch any *.img flash seperatly to the phone with your scatter.txt and show wich *.img is damaged to unbrick my phone.
i ask you to send me any or all *.img from your running phone, so i can test it, but any complet rom also can help.
bigrammy, without any file from running P6000, a can´t unbrick this phone , but also a stock-rom can help.
you will not send anything, you can not help me at the moment.
good day so long.
TM
Verify all backups
Important Note: When you backup the system.img make sure to set it large enough to capture all the data on the partition if unsure just backup the entire system partition
Please use Hex Edit to quickly verify the read backs have captured all data !!!!
See Photo
Free version can be found here: http://www.hexedit.com/index.html
Great online Hex to file size and vice versa (other way around) MB, GB etc is HERE THANKS TO THEM FOR THAT :good:
enr88 said:
Ok, i m a noob with Mtk devices..but i've experience on modding with other android phone..... proc/partinfo give me the same result on partion size ecc...
but
Only one thing I did not understand,
I have to connect the device without a battery, right?
Connecting the device without battery, despite having installed the drivers Vcom, I see that the device is recognized for 2 seconds then disconnects automatically, then again recognized .. is this normal behavior?
thx for your work :good::good:
Click to expand...
Click to collapse
I Missed your post
In Future please use the Q&A bro just read the OP above.
To answer your question: When the progress bar in flashtool turns red put in your battery quickly I have mine ready and just slightly away from the contacts.
When done it will now hold it on until the end of the read backs.
I will copy this to the Q&A HERE
---------- Post added at 01:23 AM ---------- Previous post was at 12:58 AM ----------
sawok said:
Yes i do that yesterday with the same result and read out over adb :boot.img, cache.img, lk.bin, logo.bin, preloader.bin, recovery.img, secro.img, system.img, userdata.img and proc/partinfo, that shows the memory mapping same as in your scatter.txt, i have check it in MTKDroid Tools.
now i wisch any *.img flash seperatly to the phone with your scatter.txt and show wich *.img is damaged to unbrick my phone.
i ask you to send me any or all *.img from your running phone, so i can test it, but any complet rom also can help.
bigrammy, without any file from running P6000, a can´t unbrick this phone , but also a stock-rom can help.
you will not send anything, you can not help me at the moment.
good day so long.
TM
Click to expand...
Click to collapse
Bro why should I share everything
I use the phone everyday for developing and for personal use too.
It's 99.9% certain that the encryption app screwed the userdata and as I have said I will not share this.
I dont want to factory reset the phone until I have done the with Development work
For you to sulk with me is not very fair I am sure someone will upload a copy to needrom.com very soon now we have the Tool.
still wait for P6000 ROM
bigrammy said:
I Missed your post
In Future please use the Q&A bro just read the OP above.
To answer your question: When the progress bar in flashtool turns red put in your battery quickly I have mine ready and just slightly away from the contacts.
When done it will now hold it on until the end of the read backs.
I will copy this to the Q&A HERE
---------- Post added at 01:23 AM ---------- Previous post was at 12:58 AM ----------
Bro why should I share everything
I use the phone everyday for developing and for personal use too.
It's 99.9% certain that the encryption app screwed the userdata and as I have said I will not share this.
I dont want to factory reset the phone until I have done the with Development work
For you to sulk with me is not very fair I am sure someone will upload a copy to needrom.com very soon now we have the Tool.
Click to expand...
Click to collapse
no problem...YOU say
I will share when everything works as it should so you will be able to fix your brick
but i waiting for brother that can make backup, factory reset to make clean backup and then restore first backup , i will not any personality data from anyone :cyclops:
bigrammy THX for scatter.txt
(Solved finger trouble) Userdata!!!! Wrong size????
WARNING!!! The Start Address of the USERDATA is WRONG or NOT WHAT I WANT!!! IT will give you a 12GB Backup THIS NEEDS TO BE CORRECTED it also needs to be corrected on the SCATTER FILE!!!
I have noticed while making a Backup of the USERDATA it produced a 12GB backup using the /partinfo information from the phone. This is just a full Phone Backup pretty much. ROM Dump It may be handy to Restore a device but must be wrong for just capturing the actual userdata info
So How do we find the ACTUAL Userdata Maybe this is the reason why MTKDroidTools stopped doing userdata backups in later versions
So I need to do some more digging around.
Any Help regarding this will be appreciated :good:
Panic over guys I forgot to Name the readback userdata.img It seems when you forget to name it eg: leave it as ROM_0 the flashtool will ignore your inputs and just dump the whole ROM. :laugh: Still 6GB though
You can use this handy online Hex converter which will give you the hex value of a size or vice versa. Here and thanks to them for the easy to use tool :good:
Hi bigrammy, another noob/dumb question regarding how to make full backup of my device... What I have to backup with spflashtool to have a complete backup of the phone?
I have to proceed individually for each "partition" boot, recovery etc ..?
And sorry for the first question..thinking of post it on q&a thread
enr88 said:
Hi bigrammy, another noob/dumb question regarding how to make full backup of my device... What I have to backup with spflashtool to have a complete backup of the phone?
I have to proceed individually for each "partition" boot, recovery etc ..?
And sorry for the first question..thinking of post it on q&a thread
Click to expand...
Click to collapse
Yes bro you can and probably should readback all partitions manually just once for safe keeping :good:
MTKDroidtools used to do everything for you but with our phone you must do it manually now :crying:
Remember to increase the system.img size to at least 1GB to be sure you capture all the data mine is around 0.95GB actual size at the moment but remember it will increase as you install more things app updates etc etc
I have attached a picture below.
bigrammy said:
Yes bro you can and probably should readback all partitions manually just once for safe keeping :good:
MTKDroidtools used to do everything for you but with our phone you must do it manually now :crying:
Remember to increase the system.img size to at least 1GB to be sure you capture all the data mine is around 0.95GB actual size at the moment but remember it will increase as you install more things app updates etc etc
I have attached a picture below.
Click to expand...
Click to collapse
i'm trying to do a test backup of cache.img, after 12min it's still with read download( i put my battery in phone when i saw the red download bar), also the speed seem blocked at 1,20 mb/s..
https://onedrive.live.com/redir?res...authkey=!AJbyot7NvHpg3_k&v=3&ithint=photo,png
enr88 said:
i'm trying to do a test backup of cache.img, after 12min it's still with read download( i put my battery in phone when i saw the red download bar), also the speed seem blocked at 1,20 mb/s..
https://onedrive.live.com/redir?res...authkey=!AJbyot7NvHpg3_k&v=3&ithint=photo,png
Click to expand...
Click to collapse
Just stop it and retry in a different usb port also make sure you run the flashtool as administrator (Right click flashtool.exe select run as administrator)
bigrammy said:
Just stop it and retry in a different usb port also make sure you run the flashtool as administrator (Right click flashtool.exe select run as administrator)
Click to expand...
Click to collapse
No luck tried different usb port, 2.0 and also 3.0 usb. also tried to backup recovery.img like you do in your video tut but no luck again..
Can u address me to a correct driver file, and all necessary files, maybe i download and install different one..
Ps. i have a windows 8.1 x64 laptop
I was trying to flash the OC1 deodexed rom using flashfire everything was going fine it was flashing then it said it was going to reboot and as in the instructions I waited for 30 min to boot up and nothing but a black screen so I fell Asleep woke up and still nothing so I took out the battery and tried to turn the phone on and nothing.... No power, no usb connection sound, no recovery, no download mode , nothing works Ive been looking all day for a fix... NOTHING all I can do is a JTAG but damn Im broke right now... and a USBJIG but damn it I really need my phone working! USJIB there is no guarantee that it would work its a 50/50 I guess... Any Ideas on how to unbrick using a SD card like on a GS3 post I found using that method?
Akcent13 said:
I was trying to flash the OC1 deodexed rom using flashfire everything was going fine it was flashing then it said it was going to reboot and as in the instructions I waited for 30 min to boot up and nothing but a black screen so I fell Asleep woke up and still nothing so I took out the battery and tried to turn the phone on and nothing.... No power, no usb connection sound, no recovery, no download mode , nothing works Ive been looking all day for a fix... NOTHING all I can do is a JTAG but damn Im broke right now... and a USBJIG but damn it I really need my phone working! USJIB there is no guarantee that it would work its a 50/50 I guess... Any Ideas on how to unbrick using a SD card like on a GS3 post I found using that method?
Click to expand...
Click to collapse
Which ROM did you flash, link?
You will need an OC1 debrick.img in order to recover. Someone on here that is rooted and on the OC1 bootloader will need to create the .img with the following ADB or terminal command and send to you:
Su
dd if=/dev/block/mmcblk0 of=/sdcard/debrick.img bs=1024 count=131072
You will then need the Win32 Disk Image tool to burn it onto your extsd card. Your device will boot from the OC1 BL on your extsdcard at which point you can go into download mode and Odin flash the OC1 .tar.
Ahhh, so that is how a debrick works.
Perhaps @dgutierrez04 would be willing to help? He is the first one who comes to my mind that has OC1.
muniz_ri said:
Which ROM did you flash, link?
You will need an OC1 debrick.img in order to recover. Someone on here that is rooted and on the OC1 bootloader will need to create the .img with the following ADB or terminal command and send to you:
Su
dd if=/dev/block/mmcblk0 of=/sdcard/debrick.img bs=1024 count=131072
You will then need the Win32 Disk Image tool to burn it onto your extsd card. Your device will boot from the OC1 BL on your extsdcard at which point you can go into download mode and Odin flash the OC1 .tar.
Click to expand...
Click to collapse
its on droidviews . com verizon galaxy s4 verizon oc1 root
is there any one that could help me get that .img bro? I have a Iphone 5s but I hate I phones I miss my S4... :/
Akcent13 said:
its on droidviews . com verizon galaxy s4 verizon oc1 root
is there any one that could help me get that .img bro? I have a Iphone 5s but I hate I phones I miss my S4... :/
Click to expand...
Click to collapse
Even though I closed my XDA thread they were linking to my AFH account. I just deleted the files so their links are now dead.
I'm sure someone will step up and come through with the files, it takes just a couple minutes to create the .img.
Akcent13 said:
its on droidviews . com verizon galaxy s4 verizon oc1 root
is there any one that could help me get that .img bro? I have a Iphone 5s but I hate I phones I miss my S4... :/
Click to expand...
Click to collapse
Hey there. I think I did it right. so here is the image that you need i just uploaded it to my google drive.. thank you @muniz_ri for providing the steps to get the file for u. and make sure to also thank @XxD34THxX for linking me to this page. if you need something else. i am happy to help in anyway i can
https://drive.google.com/file/d/0B6jLdJmYZakud0hRTUdnbDNnNVU/view?usp=sharing
muniz_ri said:
Even though I closed my XDA thread they were linking to my AFH account. I just deleted the files so their links are now dead.
I'm sure someone will step up and come through with the files, it takes just a couple minutes to create the .img.
Click to expand...
Click to collapse
Thanks to @dgutierrez04 He provided me the debrick.img but I was not able to get my phone to boot up at all... I tried many times I re wrote the .img to the sd card followed all the steps, the batter is 100 percent charged I used my friends sprint gs s4 and no luck, I just ordered 3 different USBJIG'S hope fully one of them will be able to get it into boot mode, but not even sure if that would work since it wont even power on... Thanks Anyways bro, I appreciate the help Thats why I love the XDA FAM, God bless... :good:
dgutierrez04 said:
Hey there. I think I did it right. so here is the image that you need i just uploaded it to my google drive.. thank you @muniz_ri for providing the steps to get the file for u. and make sure to also thank @XxD34THxX for linking me to this page. if you need something else. i am happy to help in anyway i can
https://drive.google.com/file/d/0B6jLdJmYZakud0hRTUdnbDNnNVU/view?usp=sharing
Click to expand...
Click to collapse
Thanks man for the debrick.img god bless... I tried to get my phone working following the steps but nothing man.... USBJIG is my only last hope for now... If not im not going to send it in to get it fixed JTAG no way... Anyways im getting my new Galaxy S6 Edge Plus or Note 5 Next month so I can wait.. Just sucks that I wont be able to call anyone for a wile... but hey better wait then not have nothing later on right? lol thanks for the help anyways bro appreciate it! :good:
dgutierrez04 said:
Hey there. I think I did it right. so here is the image that you need i just uploaded it to my google drive.. thank you @muniz_ri for providing the steps to get the file for u. and make sure to also thank @XxD34THxX for linking me to this page. if you need something else. i am happy to help in anyway i can
https://drive.google.com/file/d/0B6jLdJmYZakud0hRTUdnbDNnNVU/view?usp=sharing
Click to expand...
Click to collapse
Hey I need OC1 Debrick file can u upload it again
Well I'm stuck with a black screen.....nothing. I know I can send it in for jtag but this is my daily driver so I'm hesitant and need it running soon. I was running stang5litre's oc1 rom and tried to flash gigilies port of albe96's super6 v1.87 ROM. I followed instructions to the T. I wiped then installed through flashfire. That could have been the problem but it was supposedly tested with it so idk. Any way I could fix with an sdcard or something? Thanks in advance!!!
Can you get into download mode?
Hold down the volume down, Home key, and Press and Release power
Sent from my SCH-I545 using Tapatalk
No sir completely hard bricked.
Will it turn on at all?
BtoGS488 said:
Will it turn on at all?
Click to expand...
Click to collapse
No sir won't do anything.
Although when I plug it in it says searching for drivers for qhusb_dload. But after awhile it says that this device has malfunctioned.
turn it off again, hold Vol- and power.... (release power when screen light up) still nothing?
No sir but I meant when I plug it into the computer the computer says that.
That's really not good at all. I think JTAG repair is the only hope.
ToastyZ71 said:
That's really not good at all. I think JTAG repair is the only hope.
Click to expand...
Click to collapse
OK thankyou. I was afraid that was what I was gonna have to do. But I still have hope for some kind of sdcard repair. Lol
hard bricked I545 also!
Looking to see if theres a SD Card method before I have to look into getting it JTagged. I dont know anything of how or what firmware it has but its a friends phone and he doesnt even know how it hardbricked. I've been trying to read before I posted anything so this is where im at as I am a newb lol.
I have win32diskimager. I need a debrick img for sch-I545. I also have a 32gb class 10 microsd card.
I'm guessing I get the img, write it to the sd using win32disk. put it in phone, then try to power on correct?
I got a debrick img somewhere on xda, but it was labeled backup.bin, and I didnt really know how to convert it to .img correctly nor do i know how to check if its been written properly?
Any help would be awesome! thank you
dougfunnieyo said:
Looking to see if theres a SD Card method before I have to look into getting it JTagged. I dont know anything of how or what firmware it has but its a friends phone and he doesnt even know how it hardbricked. I've been trying to read before I posted anything so this is where im at as I am a newb lol.
I have win32diskimager. I need a debrick img for sch-I545. I also have a 32gb class 10 microsd card.
I'm guessing I get the img, write it to the sd using win32disk. put it in phone, then try to power on correct?
I got a debrick img somewhere on xda, but it was labeled backup.bin, and I didnt really know how to convert it to .img correctly nor do i know how to check if its been written properly?
Any help would be awesome! thank you
Click to expand...
Click to collapse
First off if your friend didn't do any type of modding or flashing then the problem could be that the power button is stuck in the open position and you may need to get that replaced.
But if it hardbricked during a flash or something of that sort then The sdcard has to be the same amount as phone storage. So if you have the 32gb then in theory that would work. But if you have 16gb phone you would need a 16gb sdcard. I haven't had any luck but I don't have a class 10 sdc so that's probably the problem. Also from the videos ive watched on youtube (so i could be wrong) you don't need to change the file to img just click on the bottom right corner when you are searching for the file press where it say ".img" ".IMG" and change it to "." Then you will be able to find the backup.bin file. Then me know if this helps and or if it worked then I may have to buy myself a class 10 sdc. Thanks
nathancarlile said:
First off if your friend didn't do any type of modding or flashing then the problem could be that the power button is stuck in the open position and you may need to get that replaced.
But if it hardbricked during a flash or something of that sort then The sdcard has to be the same amount as phone storage. So if you have the 32gb then in theory that would work. But if you have 16gb phone you would need a 16gb sdcard. I haven't had any luck but I don't have a class 10 sdc so that's probably the problem. Also from the videos ive watched on youtube (so i could be wrong) you don't need to change the file to img just click on the bottom right corner when you are searching for the file press where it say ".img" ".IMG" and change it to "." Then you will be able to find the backup.bin file. Then me know if this helps and or if it worked then I may have to buy myself a class 10 sdc. Thanks
Click to expand...
Click to collapse
Ya he works for verizon so im guessing he did or tried to flash something. He said it was hardbricked but didnt say how or what he did. I was able to write to the card changing IMG to . allowing me to choose the bin file. The phone didn't boot up or anything, could be wrong debrick img? wish I had different ones to try. This looks like it could be leaning to a JTAG repair, but I still have hope with the SD method.
I have the debrick image for gs4 oc1 I made it from another gs4 thru terminal if you would like me to upload.
nathancarlile said:
I have the debrick image for gs4 oc1 I made it from another gs4 thru terminal if you would like me to upload.
Click to expand...
Click to collapse
sure! definitely, anything is worth a shot at this point. Thank you
nathancarlile said:
I have the debrick image for gs4 oc1 I made it from another gs4 thru terminal if you would like me to upload.
Click to expand...
Click to collapse
please upload the file, i need it my i545 is getting hardbrick
thanks before
i have vwz GS4 i try to unlock boot loader using EZ-unlocker that hard brick my device .neeed help to brind it back to life kindly upload debrick img and procedure
Same exact problem happened to me. All the way down to flashing the same ROM. I believe my battery popped out while flashing with FF, once I put it back in my phone wouldn't turn on. I'm in a bit of a panic over here :/
Unlocked to bricked
You can not unlock the boot loader there is no method yet to do so. I wonder if some of you have drained you battery & that's why it won't boot up to at least down loading screen. Try plugging it in to a charger for 1/2 hour or so then try.
If you can get to down loading screen you can hook id to computer & load the stock firmware with Odin.
traco1 said:
You can not unlock the boot loader there is no method yet to do so. I wonder if some of you have drained you battery & that's why it won't boot up to at least down loading screen. Try plugging it in to a charger for 1/2 hour or so then try.
If you can get to down loading screen you can hook id to computer & load the stock firmware with Odin.
Click to expand...
Click to collapse
i try with new battery full charged but still no sign of life in it after using ez-unlocker to unlock boot loader and pc wont detect:silly::crying: any thing when i connect phone with it
nathancarlile said:
Well I'm stuck with a black screen.....nothing. I know I can send it in for jtag but this is my daily driver so I'm hesitant and need it running soon. I was running stang5litre's oc1 rom and tried to flash gigilies port of albe96's super6 v1.87 ROM. I followed instructions to the T. I wiped then installed through flashfire. That could have been the problem but it was supposedly tested with it so idk. Any way I could fix with an sdcard or something? Thanks in advance!!!
Click to expand...
Click to collapse
funny i just did the opposite I bricked flashing stang's new 2.0 on my OC1 OTA phone (got it for cheap after the update) just had rooted it and flashed my gDux to it no problems then flashed stang's and bam. the issue resides in the fact that when I made the OP for Super6 it was based on my downgrading to 4.42 Kernel then using Safestrap. Which a kernel flash has to have the -orig tag at the end of the block in order to flash over the stock kernel. This means that if your on OC1 and you flash a ROM you must not flash a kernel and if you do on accident you need to pull the battery before the install finishes and if thats not possible hold the vol down button in hopes of getting to download mode before trying to boot the phone or it will brick. so if your going to try and flash Stang 2.0 don't use his FF instructions the only time you need to flash a kernel in FF is if your upgrading with mdk, or Safestrap is installed on the phone. otherwise make sure the block for the kernel doesnt have the -orig because that wont work obviously. sucks Im usually more careful when flashing other's releases. if someone has the OTA installed and bootloaders at 5.0 an SD .img for debricking would be useful could someone please zip a result of this command from terminal in the Stock ROM:
Code:
dd if=/dev/block/mmcblk0 of=/sdcard/debrick.img bs=1048576 count=128
if you zip the .img you'll save a lot of bandwidth. I'd like to try and attempt to revive via sdcard (doubt its possible I didnt have luck with NK and an SD) but if nothing else theres been some improvements the qhs_usb department it might be possible to force write the debrick.img I'll do some investigating but if anyones already fixed this issue please let me know