Q&A for Elephone P6000 mtk6732 64bit SP Flash Tool
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Elephone P6000 mtk6732 64bit SP Flash Tool. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
SPFlashtooll Elephone P6000
Please, write me how did you backup firmware Elephone P6000?
The OP has been updated so Please review this Many Thanks to all
no really noob...
Hi bigrammy,
i can´t brick my phone you know, and i have used any time tools like SP Flash Tool, send me please a link to you files and i will make a first test after i have check any files 1to1 to my files i have read out.
regards
TM
video tut on youtube
See main post for links Enjoy.
Questions to this thread.
sawok said:
Hi bigrammy,
i can´t brick my phone you know, and i have used any time tools like SP Flash Tool, send me please a link to you files and i will make a first test after i have check any files 1to1 to my files i have read out.
regards
TM
Click to expand...
Click to collapse
TUT Main post.
good news , but
Hi bigrammy, or anybody else,
can you send me your Backup, my P6000 need this one for unbricking.....
THX
sawok said:
Hi bigrammy, or anybody else,
can you send me your Backup, my P6000 need this one for unbricking.....
THX
Click to expand...
Click to collapse
Do you know what gets encrypted exactly You will need to be specific so do some research first :good:
If I were you I would just return it to Elephone because your problem is their fault 100% and not many will share their userdata normally
See this thread HERE maybe this is the same problem you have.
Ok
bigrammy said:
Do you know what gets encrypted exactly You will need to be specific so do some research first :good:
If I were you I would just return it to Elephone because your problem is their fault 100% and not many will share their userdata normally
See this thread xxx maybe this is the same problem you have.
Click to expand...
Click to collapse
have read this...
Hi, i understand, it is long time and much money for sending the phone from germany to china and back, i hoped , you have i clean backup without any personality data of you .
Perhaps you can send system.img i flash it with your scatter.txt and i test it help or not?
Can i upload my parts of *.img that i have read out, and you can see wich part is need to reflash ?
TM
sawok said:
have read this...
Hi, i understand, it is long time and much money for sending the phone from germany to china and back, i hoped , you have i clean backup without any personality data of you .
Perhaps you can send system.img i flash it with your scatter.txt and i test it help or not?
Can i upload my parts of *.img that i have read out, and you can see wich part is need to reflash ?
TM
Click to expand...
Click to collapse
Ok try to boot to recovery using adb.
1. Start MTKDroid tools.
2. Push the adb button on the bottom right corner of droid tools
3. start your phone while connected to the pc
4. watch to see if droid tools loads your phone info :fingers-crossed:
5. If it does go to the adb command prompt and enter.
Code:
adb reboot recovery
Wipe everything you can from the options in recovery.
It can take a while so go have a cup of tea.
:fingers-crossed:
hmmm
bigrammy said:
Ok try to boot to recovery using adb.
1. Start MTKDroid tools.
2. Push the adb button on the bottom right corner of droid tools
3. start your phone while connected to the pc
4. watch to see if droid tools loads your phone info :fingers-crossed:
5. If it does go to the adb command prompt and enter.
Code:
adb reboot recovery
Wipe everything you can from the options in recovery.
It can take a while so go have a cup of tea.
:fingers-crossed:
Click to expand...
Click to collapse
Yes i do that yesterday with the same result and read out over adb :boot.img, cache.img, lk.bin, logo.bin, preloader.bin, recovery.img, secro.img, system.img, userdata.img and proc/partinfo, that shows the memory mapping same as in your scatter.txt, i have check it in MTKDroid Tools.
now i wisch any *.img flash seperatly to the phone with your scatter.txt and show wich *.img is damaged to unbrick my phone.
i ask you to send me any or all *.img from your running phone, so i can test it, but any complet rom also can help.
bigrammy, without any file from running P6000, a can´t unbrick this phone , but also a stock-rom can help.
you will not send anything, you can not help me at the moment.
good day so long.
TM
Verify all backups
Important Note: When you backup the system.img make sure to set it large enough to capture all the data on the partition if unsure just backup the entire system partition
Please use Hex Edit to quickly verify the read backs have captured all data !!!!
See Photo
Free version can be found here: http://www.hexedit.com/index.html
Great online Hex to file size and vice versa (other way around) MB, GB etc is HERE THANKS TO THEM FOR THAT :good:
enr88 said:
Ok, i m a noob with Mtk devices..but i've experience on modding with other android phone..... proc/partinfo give me the same result on partion size ecc...
but
Only one thing I did not understand,
I have to connect the device without a battery, right?
Connecting the device without battery, despite having installed the drivers Vcom, I see that the device is recognized for 2 seconds then disconnects automatically, then again recognized .. is this normal behavior?
thx for your work :good::good:
Click to expand...
Click to collapse
I Missed your post
In Future please use the Q&A bro just read the OP above.
To answer your question: When the progress bar in flashtool turns red put in your battery quickly I have mine ready and just slightly away from the contacts.
When done it will now hold it on until the end of the read backs.
I will copy this to the Q&A HERE
---------- Post added at 01:23 AM ---------- Previous post was at 12:58 AM ----------
sawok said:
Yes i do that yesterday with the same result and read out over adb :boot.img, cache.img, lk.bin, logo.bin, preloader.bin, recovery.img, secro.img, system.img, userdata.img and proc/partinfo, that shows the memory mapping same as in your scatter.txt, i have check it in MTKDroid Tools.
now i wisch any *.img flash seperatly to the phone with your scatter.txt and show wich *.img is damaged to unbrick my phone.
i ask you to send me any or all *.img from your running phone, so i can test it, but any complet rom also can help.
bigrammy, without any file from running P6000, a can´t unbrick this phone , but also a stock-rom can help.
you will not send anything, you can not help me at the moment.
good day so long.
TM
Click to expand...
Click to collapse
Bro why should I share everything
I use the phone everyday for developing and for personal use too.
It's 99.9% certain that the encryption app screwed the userdata and as I have said I will not share this.
I dont want to factory reset the phone until I have done the with Development work
For you to sulk with me is not very fair I am sure someone will upload a copy to needrom.com very soon now we have the Tool.
still wait for P6000 ROM
bigrammy said:
I Missed your post
In Future please use the Q&A bro just read the OP above.
To answer your question: When the progress bar in flashtool turns red put in your battery quickly I have mine ready and just slightly away from the contacts.
When done it will now hold it on until the end of the read backs.
I will copy this to the Q&A HERE
---------- Post added at 01:23 AM ---------- Previous post was at 12:58 AM ----------
Bro why should I share everything
I use the phone everyday for developing and for personal use too.
It's 99.9% certain that the encryption app screwed the userdata and as I have said I will not share this.
I dont want to factory reset the phone until I have done the with Development work
For you to sulk with me is not very fair I am sure someone will upload a copy to needrom.com very soon now we have the Tool.
Click to expand...
Click to collapse
no problem...YOU say
I will share when everything works as it should so you will be able to fix your brick
but i waiting for brother that can make backup, factory reset to make clean backup and then restore first backup , i will not any personality data from anyone :cyclops:
bigrammy THX for scatter.txt
(Solved finger trouble) Userdata!!!! Wrong size????
WARNING!!! The Start Address of the USERDATA is WRONG or NOT WHAT I WANT!!! IT will give you a 12GB Backup THIS NEEDS TO BE CORRECTED it also needs to be corrected on the SCATTER FILE!!!
I have noticed while making a Backup of the USERDATA it produced a 12GB backup using the /partinfo information from the phone. This is just a full Phone Backup pretty much. ROM Dump It may be handy to Restore a device but must be wrong for just capturing the actual userdata info
So How do we find the ACTUAL Userdata Maybe this is the reason why MTKDroidTools stopped doing userdata backups in later versions
So I need to do some more digging around.
Any Help regarding this will be appreciated :good:
Panic over guys I forgot to Name the readback userdata.img It seems when you forget to name it eg: leave it as ROM_0 the flashtool will ignore your inputs and just dump the whole ROM. :laugh: Still 6GB though
You can use this handy online Hex converter which will give you the hex value of a size or vice versa. Here and thanks to them for the easy to use tool :good:
Hi bigrammy, another noob/dumb question regarding how to make full backup of my device... What I have to backup with spflashtool to have a complete backup of the phone?
I have to proceed individually for each "partition" boot, recovery etc ..?
And sorry for the first question..thinking of post it on q&a thread
enr88 said:
Hi bigrammy, another noob/dumb question regarding how to make full backup of my device... What I have to backup with spflashtool to have a complete backup of the phone?
I have to proceed individually for each "partition" boot, recovery etc ..?
And sorry for the first question..thinking of post it on q&a thread
Click to expand...
Click to collapse
Yes bro you can and probably should readback all partitions manually just once for safe keeping :good:
MTKDroidtools used to do everything for you but with our phone you must do it manually now :crying:
Remember to increase the system.img size to at least 1GB to be sure you capture all the data mine is around 0.95GB actual size at the moment but remember it will increase as you install more things app updates etc etc
I have attached a picture below.
bigrammy said:
Yes bro you can and probably should readback all partitions manually just once for safe keeping :good:
MTKDroidtools used to do everything for you but with our phone you must do it manually now :crying:
Remember to increase the system.img size to at least 1GB to be sure you capture all the data mine is around 0.95GB actual size at the moment but remember it will increase as you install more things app updates etc etc
I have attached a picture below.
Click to expand...
Click to collapse
i'm trying to do a test backup of cache.img, after 12min it's still with read download( i put my battery in phone when i saw the red download bar), also the speed seem blocked at 1,20 mb/s..
https://onedrive.live.com/redir?res...authkey=!AJbyot7NvHpg3_k&v=3&ithint=photo,png
enr88 said:
i'm trying to do a test backup of cache.img, after 12min it's still with read download( i put my battery in phone when i saw the red download bar), also the speed seem blocked at 1,20 mb/s..
https://onedrive.live.com/redir?res...authkey=!AJbyot7NvHpg3_k&v=3&ithint=photo,png
Click to expand...
Click to collapse
Just stop it and retry in a different usb port also make sure you run the flashtool as administrator (Right click flashtool.exe select run as administrator)
bigrammy said:
Just stop it and retry in a different usb port also make sure you run the flashtool as administrator (Right click flashtool.exe select run as administrator)
Click to expand...
Click to collapse
No luck tried different usb port, 2.0 and also 3.0 usb. also tried to backup recovery.img like you do in your video tut but no luck again..
Can u address me to a correct driver file, and all necessary files, maybe i download and install different one..
Ps. i have a windows 8.1 x64 laptop
Related
So you came at XDA-Developers to find help? Well, this is your thread!
"Give a man a fish and you feed him for a day. Teach a man to fish and you feed him for a lifetime"
Hello new user and welcome to XDA-Developers. We are a developer’s forum, with the purpose of development. Our work can be used in several ways, and, we know that sometimes it could help you. So, in order to maintain our forums clean and properly organized maintaining a proper development environment while at the same time to give you a chance to join our forums we created this thread.
This thread is for sensible questions from new or inexpert users. If you think your question may be a little basic for a developer forum then this is the place to ask it.
Here you shall find an atmosphere free of prejudice, where we will try to help you in your problem, answer your most basic questions and aid you on troubleshooting your device. We know that learning all the technicalities takes time, however they are necessary in order to interact with us.
Bare in mind that we are not technical support, we do not work for any company or get paid to help, we are just independent developers gathered in a community called XDA-Developers. Therefore all we will do is guide you into troubleshooting your device yourself, but under no circumstance we are abided to do so.
We want you to become the kind of user we see as productive to a developer’s community, and why not? to be a developer yourself!
Note to General users:
This is a chance for more advanced users to “give back” at XDA-Developers the knowledge we have gathered together in a decade of development. This is a thread to behave in a tolerant way, taking into consideration that the user posting queries might have never even heard words such as “adb” or “ROM", so, if you are not willing to be helpful, I kindly invite you to browse into another thread.
"Time has changed, Users have changed and so will XDA-Developers"
I would like to thank D.O.C for the creation of this text and its tacit agreement to perpetuate it in this section of the forum, All Due Credit to D.O.C! You can access the original thread by clicking HERE.
Moderators will not tolerate "flaming" or "trolling" in this thread as it is specifically provided for those who are still learning the basics.. We will delete and sanction without warning any post that show intention other then to help the new user.
This thread should be a sticky! :good:
Thread stuck
Help Please
My HTC one X+ recently underwent water damage. I took it to a cell phone repair store said it had no visible damage inside.
Bootloader works, Recovery works (TWRP), Boot animation works, everything seems to work.
The issue is that after it boots up it displays a black screen with the notification bar at the top.
I probably didn't give enough info, so don't hesitate to ask for more info.
Hi Marshall,
Do you have any sort of previous ROM backup? Which ROM was on your phone at the time in went "underwater"?
If I was in your situation here is what I would try, if your phone is detected by Windows and you can access the storage naturally.
Reboot in Recovery
Make a backup of my actual ROM
Make a full wipe, (factory reset, system, Cache & Dalvik)
Flash any intend ROM
Flash boot.img & Erase Cache
Reboot
There are some chances that your phone could boot normally. :fingers-crossed:
Recovering deleted photos & video
Hello,
I accidently deleted some pictures and videos on my HTC One Plus X and was wondering if there was some way to recover them. I tried some third party software but none of them would recognize the phone when it was plugged into the computer (although the computer recognized the phone). I looked on the Google Apps store and there are two apps that will do it if it was installed prior to the deletion. So those won't help me. I would appreciate it if anyone could let me know if they have had any luck getting back the deleted pictures and video. Thanks and have a great day.
Jon
Hi jeepdawg90,
It should have a way to, but I have nothing to share unfortunately. This phone is built with a data/media instead of an SD card and this means a totally different way to access the storage and all the usual arsenal of useful tools are ineffective to recover deleted files on this kind of partition. Let's wait to see if a developer can help you. One thing is certain, the less you are using your phone the more files can be restored IF it is possible. The closest I can help you, is by giving you this thread to read.
Pleaase help me!
Uhmm please do reply.. i tried rooting my htc one x+ using this method (Unlock bootloader then root) so it went well, i got my phone rooted, i saw the superuser app in my drawer. however my wi-fi and any data connection wont work. so what i did was i factory reseted my phone. now when i open it up and unlock the lockscreen, i can only see a white screen with htc logo on it. however when i press the buttons for voice search it still opens up the voice search. and when i press the recent apps button it will bring me to the recent app button. Do you guys have any idea what stupid thing i did to my phone and how do i fix it? Phone is htc one x+ int. thanks please help me :fingers-crossed:
---------- Post added at 05:15 PM ---------- Previous post was at 05:05 PM ----------
earprone said:
Uhmm please do reply.. i tried rooting my htc one x+ using this method (Unlock bootloader then root) so it went well, i got my phone rooted, i saw the superuser app in my drawer. however my wi-fi and any data connection wont work. any idea on how to fix this? btw i havent installed any recovery.. cuz the instructions i followed didn't told me to do so. please help me.. im willing to flash back to my stock phone.. then i'll root it again hehe thanks a lot in advance please help me guys
Click to expand...
Click to collapse
Hi earprone,
First let me ask if you have a working SDK/ADB/HTC's Driver combinaison tools in perfect working order? If not this is the first step to do, otherwise it will be very difficult for you to recover a functional phone.
Please look in my signature and click to access a tutorial to do accordingly if your are on Windows based computer. Plug your phone on the charger during this time. Please don't hesitate to ask if something is unclear or your are not certain to perform, we are here to help!
Lucky Thirteen said:
Hi earprone,
First let me ask if you have a working SDK/ADB/HTC's Driver combinaison tools in perfect working order? If not this is the first step to do, otherwise it will be very difficult for you to recover a functional phone.
Please look in my signature and click to access a tutorial to do accordingly if your are on Windows based computer. Plug your phone on the charger during this time. Please don't hesitate to ask if something is unclear or your are not certain to perform, we are here to help!
Click to expand...
Click to collapse
Mr. Luckythirteen
heey thank you... will be doing this right now.. thanks so much =) btw my phone already opens up normaly aftr the lock screen.. my only problem now is the data connections like wifi and the mobile data and my phone signal.. bluetooth is the only working thing now.. is this the same thing to do? just want to clarify as im a bit cautious now haha please help me
Hi earprone,
Which ROM you are planning to install on your phone? Also please do confirm that you have an International (ENRC2B) model.
As for your WiFi and DATA issues flashing the correspondent boot.img of your actual ROM could be the first solution to try.
Mr. Lucky Thirteen
Lucky Thirteen said:
Hi earprone,
First let me ask if you have a working SDK/ADB/HTC's Driver combinaison tools in perfect working order? If not this is the first step to do, otherwise it will be very difficult for you to recover a functional phone.
Please look in my signature and click to access a tutorial to do accordingly if your are on Windows based computer. Plug your phone on the charger during this time. Please don't hesitate to ask if something is unclear or your are not certain to perform, we are here to help!
Click to expand...
Click to collapse
Mr Thirteen
Im done intalling the SDK and i Successfully rebooted my phone using adb reboot command.. now what's next to do?
---------- Post added at 03:53 PM ---------- Previous post was at 03:46 PM ----------
Lucky Thirteen said:
Hi earprone,
Which ROM you are planning to install on your phone? Also please do confirm that you have an International (ENRC2B) model.
As for your WiFi and DATA issues flashing the correspondent boot.img of your actual ROM could be the first solution to try.
Click to expand...
Click to collapse
Mr. Lucky Thirteen
Im planning to install Vipermod... I do have and international one x+.. i've done the install sdk thing i think im successful cause i can reboot my phone now thru pc by typing adb reboot as you said in your tutorial..:victory:
Hi earprone,
Great, this is a good news.
Let's install your new recovery now.
Download this TWRP Recovery for the International version (ENRC2B) : HERE
Once downloaded to simplify the operation rename your file like this : TWRPrecovery.img
Take this TWRPrecovery.img file and Copy/Paste it in the platform-tool of your SDK folder.
TIP : Since your are in the platform-tool folder you can create a batch file to open a command window right from your Desktop.
Do this directly into the platform-tools folder.
Right click on an empty space and select Create New text document
In the new text paste this : c:\windows\system32\cmd.exe
Save it with this name StartADB.bat (important to save it with .bat extension and overwrite the warning)
Now right click again on your new .bat file, and create a shortcut to your Desktop.
Now try to : adb devices your phone via your new Start ADB batch file directly form your Desktop shortcut with your phone plugged on your USB cable.
If you have a serial number as confimation you have done it right!
This a ONE TIME OPERATION TO DO, IT WILL WORK AS LONG AS THE SHORTCUT WILL BE ON YOUR DESKTOP.
Time to plug your phone on your USB cable if it is not already plugged.
Click on Start SDK, in the command window type at the prompt > adb devices (Enter)
Confirmation of the serial.
At the prompt type >adb reboot-bootloader (Enter)
The phone will reboot in bootloader mode.
Make sure the FASTBOOT USB is highlighted.
At the prompt type >fastboot flash recovery TWRPrecovery.img (Enter)
If Success is achieved, type again at the prompt >fastboot erase cache (Enter)
You now have TWRP Recovery installed.
Unplug your USB cable and hit Power button one time.
Select Recovery with your Volume rocker.
Hit Power button one time.
Your phone should reboot in Recovery
Familiarize yourself with it.
Click on BACKUP and perform a full backup of your actual ROM even if it is buggy.
Once done REBOOT System.
This is it, your are ready to flash the ROM of your choice. explanation in the next post. Please do confirm this was successful before continuing.
How to flash your desired ROM
Then the previous instructions were all working as they should and now you want that wonderful ROM from that thread, right?
Once you have selected the ROM for your model version INTERNATIONAL [SIZE="+1"]OR[/SIZE] AT&T/TELUS, simply download it.
Take also the correspondent boot.img that need to flashed just before or just after (doesn't really matter) the ROM installation.
Transfer your ROM.zip at the root of your internal storage of the HTC ONE X+ via your USB cable.
During the is transferring on your phone simply extract the boot.img that match your ROM, rename it for an easier recognition (i.e. Viperboot.img, Eleganciaboot.img, ARHDboot.img, etc) Copy/Paste it in your platform-tool folder (SDK)
Leave your phone plugged to your USB cable
Click on Start SDK, in the command window type at the prompt > adb devices (Enter)
Confirmation of the serial.
At the prompt type >adb reboot-bootloader (Enter)
The phone will reboot in bootloader mode.
Make sure the FASTBOOT USB is highlighted.
At the prompt type >fastboot flash boot insert_your_boot_image_here.img (Enter)
If Success is achieved, type again at the prompt >fastboot erase cache (Enter)
You now have a customized boot.img installed.
Unplug your USB cable and hit Power button one time.
Select Recovery with your Volume rocker.
Hit Power button one time.
Your phone should reboot in Recovery
(!! The following instruction are with TWRP Recovery installed !!)
Select Wipe menu, then select Factory reset (swipe), select System (swipe)
Go back to the Install menu and select it.
Locate your ROM.zip and select it.
Swipe to confirm.
Probably Aroma installer will start, simply follow the on-screen instructions and complete the installation.
!! Confirm the Rebooting option ONLY IF YOU FLASHED THE BOOT.IMG BEFORE ROM INSTALLATION !!
Otherwise select the Reboot Bootloader and perform the 4 to 8 steps
Reboot the phone.
Your phone should Reboot with your new ROM, put your phone aside for ~10 minutes to let the new installation performing all it's task. Then you can customize your phone at your desire. Don't forget to reboot your phone when done.
Mr. Lucky Thirteen
Mr. Lucky Thirteen
On the link you gave me (enrcb link) there are 2 files.. should i download both the md5sum and the openrecovery? i downloaded the openrecovery and proceeded to the next procedure, however when doing >fastboot flash recovery TWRPrecovery.img (Enter) on bootloader mode it says "TWRPrecovery.img 'fastboot' is not recognized as an internal or external command, operable program or batch file." What does this mean? Thank you very much
Hi earprone,
To start with MD5 simply read HERE
Did you rename the open recovery correctly?
Thanks for the time again =)
Lucky Thirteen said:
Hi earprone,
Did you rename the open recovery correctly?
Click to expand...
Click to collapse
yes i did it as you saId.. btw the file (TWRP) i downloaded was a zip file that cannot be extracted by winzip32. do i copy that thing to C:\AndroidSDK\Platform-tools or do i NEED find a program that can unzip it? I'll attach a picture so you can see =)
Mr Thirteen!!!
i've done it. i just uninstalled winzip. then i looked at the twrp and it's name was TWRPrecovery.img.img. so thats what's causing me problems. i renamed it then woaalah i have recovery now thaaaanks a lot!!!!!! hahah will be flashing a custom rom now =) thanks really i owe you,, Damn i just read that vipermod wasnt for international.. poor luck.. i'll try elegancia themed.. now downloading
Thanks!
Lucky Thirteen said:
Hi earprone,
To start with MD5 simply read HERE
Did you rename the open recovery correctly?
Click to expand...
Click to collapse
Mr.Thirteen
Hey thank you i've done flashing a ROM on my hox+.. thank you so much for the help! :good: :good: :good: :good:
Congrats my friend!
Never hesitate to ask for help if your are stuck, remember to always backup before doing any modification and have fun exploring all the cool ROM's offered for the HOX+, you will find one that will suit your needs.
Also take the time to rate this thread if you found it helpful.
Lucky Thirteen, you are always for TWRP Recovery and against CWM. I saw it in different threads. As I'm comming from HTC HD2 forum, CWM is soooo native and so close to me. And sure I flashed CWM. But now, after saw several people like you and Loir saying only TWRP... i'm in doubt.
Can you please point me to some info about the difference between CWM and TWRP? Why Loir is saying that CWM is a crap? For me, an average user who only flashes roms and does some wipes are there any difference?
For me, if I don't want to flash Roms, I want to stay on ViperX+ for a several month, can I live with CWM and reflash to TWRP only when I decide to change a rom? (I really hate flashing ) What about CWM and battery charging... I mean if I ran a total 0 of battery, will I be able to charge my phone when it's switched off if I have CWM?
Thanks in advance.
hallow
my sm-n900p dead when playing with efs ...detecting qulecomm device in pc there are many unbrick image in forum i triead many of them but set is not on ..so if any on can make working image for me its very helpful for me
thanks
its very urgent
cdma-india said:
hallow
my sm-n900p dead when playing with efs ...detecting qulecomm device in pc there are many unbrick image in forum i triead many of them but set is not on ..so if any on can make working image for me its very helpful for me
thanks
its very urgent
Click to expand...
Click to collapse
Is the phone able to get into download mode? Is the phone detected in Odin?
no its not going to download mode , tried with boot jig also nowdownload,no recovery ,no boot , 100% boot dead i have all gagjets for repair dead boot riff,easy jtag ..many more but no one support n900p only solution is now unbrick sd card image
wating
thanks
just making thread up...some one please
here is method how to creat unbrick image plz try and upload to any safe place ,it require working n900p handset with cwm install
http://forum.xda-developers.com/showthread.php?t=2624203
How do you intend to write an img if the device won't go into download mode, recovery, or boot for that matter? Maybe look into returning your phone.
Anthonicia said:
How do you intend to write an img if the device won't go into download mode, recovery, or boot for that matter? Maybe look into returning your phone.
Click to expand...
Click to collapse
He doesn't need to boot into there to use a recovery sdcard. Me, @noobtoob, @msmercy42, and others (very sorry for those I forgot to mention, I have a very limited memory!!!) took tricks that the N900A guys got for a hard brick solution and came up with one for the N900T. Now, we're assuming this can be ported out to all other N900X variants but this still has yet to be tested. It involves grabbing about 200MB from mmcblk0 and writing it to an sd card. Not just copying it, but doing a raw write of the image file to an sdcard via the dd if command in either terminal emulator or a Linux OS environment.
If someone here has a N900P, I'd be glad to walk them through the process of creating a unbrick image for the OP. It copies over bootloader information to boot from the SD card, not the device. NO SENSITIVE EFS INFORMATION IS COPIED!!! This method has been done enough times to say that at least. .
OP: when you plug your device into your computer do you at least get a QCHSUSB port or the notification that a device has been recognized by Windows? If so, this method should work. If not, you may have a hardware fault.
Sent from my SPH-L900. Please hit the thanks button if I helped you out!
I will do it since I'm here already. Have to go to the post office but will be back and ready in about an hour. What all do I need to have?
Anthonicia said:
I will do it since I'm here already. Have to go to the post office but will be back and ready in about an hour. What all do I need to have?
Click to expand...
Click to collapse
thanks man
u required
1)working n900p handset with cwm installed
2)download
http://forum.xda-developers.com/show....php?t=2624203 (Unbrick-Creator)
3)run via cwm
4)software will creat one image file
5)send link of that file
as simple as it is
Just waiting for it to upload and I will pm you a link.
thanks man
u required
1)working n900p handset with cwm installed
2)download
http://forum.xda-developers.com/show....php?t=2624203 (Unbrick-Creator)
3)run via cwm
4)software will creat one image file
5)send link of that file
as simple as it is
Sent it to u via pm. Let us know if it works.
Wow work in first shot u r great
thanks again
u saved my phone
That's great! Glad to help.
Why not post so everyone can have the image in case of brick? I've been looking for this to have as a backup just in case
Sent from my SM-N900P using xda app-developers app
evilvoice said:
Why not post so everyone can have the image in case of brick? I've been looking for this to have as a backup just in case
Click to expand...
Click to collapse
You can make your own if you follow the link op posted in his instructions.
So...will SOMEONE post a working image? Lol. I don't have a N900P but I'd like to keep a running archive of unbrick images (in addition to space hogging firmwares) in my mediafire account to post links to. This way it'll keep the consistency of image size and contents; and most importantly people won't need to wait for it to be generated/uploaded.
Sent from my SPH-L900. Please hit the thanks button if I helped you out!
ecs87 said:
So...will SOMEONE post a working image? Lol. I don't have a N900P but I'd like to keep a running archive of unbrick images (in addition to space hogging firmwares) in my mediafire account to post links to. This way it'll keep the consistency of image size and contents; and most importantly people won't need to wait for it to be generated/uploaded.
Sent from my SPH-L900. Please hit the thanks button if I helped you out!
Click to expand...
Click to collapse
I cannot upload the actual file because it is too big (52mb). I sent you a pm. If you can upload it to a file share site and post it here that's cool. Just don't like uploading it from personal dropbox, they don't like me posting files to public sites for some reason.
Anthonicia said:
I cannot upload the actual file because it is too big (52mb). I sent you a pm. If you can upload it to a file share site and post it here that's cool. Just don't like uploading it from personal dropbox, they don't like me posting files to public sites for some reason.
Click to expand...
Click to collapse
I had a Derpbox before. Hated it. Ran out of bandwidth within the first week of posting the L900 MK4 Odin file...psch. Switched to Mediafire and never looked back. Thanks for the file by the way. Got it hosted and here it is: https://www.mediafire.com/?8bruhax81uud9dj
Please need some help hard bricked and soft bricked
Hi guys I'm trying to unbrick my galaxy note 3 on mj4 I used above image had to add the .tar.img anyways I wrote it to a 8gb sd card and also a 64gb sd card both didn't work my phone is hard bricked and hard bricked because it stays stuck on the Samsung galaxy note 3 screen and when going in to recovery it says what the OP said and then mine keeps trying to root the phone with cf auto root every time I got lol in to recovery it does the same thing when I go in to download mode my computer doesn't recognize it I think it said unrecognized device so I can't flash anything with Odin any help is much appreciated as well as a donation
I received my bootloader unlock code yesterday so started the procedure to unlock it.
I got the dreaded 50% error, I fixed this by connecting the phone in fastboot to the miui sweet where it let me update to the latest version # 7.5. I installed TWRP and then after rebooting I lost wifi and the use of TWRP.
At the moment after spending all morning on the internet looking for answers I am stuck. My phone works but has no wifi and cannot access TWRP.
I have seen there is a tut for the soup kitchen to create a new img file but cannot find the original version I need.
I want to install the CM 13 rom, please someone offer advise on next steps to take.
Thanks
Gary
Garyj881 said:
I received my bootloader unlock code yesterday so started the procedure to unlock it.
I got the dreaded 50% error, I fixed this by connecting the phone in fastboot to the miui sweet where it let me update to the latest version # 7.5. I installed TWRP and then after rebooting I lost wifi and the use of TWRP.
At the moment after spending all morning on the internet looking for answers I am stuck. My phone works but has no wifi and cannot access TWRP.
I have seen there is a tut for the soup kitchen to create a new img file but cannot find the original version I need.
I want to install the CM 13 rom, please someone offer advise on next steps to take.
Thanks
Gary
Click to expand...
Click to collapse
https://youtu.be/G_P7Qd3kpAI follow this video
Thanks for the link, I am struggling to get it to work.
I will look at uploading some pictures to better explain myself.
Ok here is a picture.
I can't complete the guide in the video.
When I get to the stage with CMD, I verify its sees my phone but when I drag the twrp image over I get the error below.
The first error is where I forgot to drag over the image file, second is what I need help with.
Okay, from what I understand, you flashed a Stock MIUI ROM through fastboot, right? And then you are trying to flash TWRP.
From what I know, flashing a firmware through Fastboot relocks the bootloader. Can you check if you bootloader is locked or unlocked? If it is locked, then unlock it again and then flash TWRP.
use the command "fastboot oem device-info" to check bootloader status.
If it is locked, unlock bootloader again.
If already unlocked, then flash TWRP using "fastboot flash recovery twrp-3.0.2-2-kenzo.img"
or alternatively use "fastboot boot recovery twrp-3.0.2-2-kenzo.img" to boot into TWRP without flashing it and then install the recovery image from within it. You do have to copy the TWRP img file to the phone storage first.
It says bootlodaer unlocked - true, so that's fine.
I cannot install twrp at all through cmd at all from the video.
I must be missing someting but dont know what. Is there an alternative method of installing it?
Garyj881 said:
Ok here is a picture.
I can't complete the guide in the video.
When I get to the stage with CMD, I verify its sees my phone but when I drag the twrp image over I get the error below.
The first error is where I forgot to drag over the image file, second is what I need help with.
Click to expand...
Click to collapse
draging the file into cmd copies the path of the file with its name which gives you an error..the error just says that it is unable to locate the file.just delete "c\adb " from the below line the you are done.
fastboot flash recoveryc:\adb\twrp-3.0.2.2-kenzo.img
the right way to do is
fastboot flash recovery twrp-3.0.2-2-kenzo.img
2'nd step :- fastboot boot twrp-3.0.2-2-kenzo.img
Hitesh, with your help I got it top work and sucsessfully installed CM13.
Rather than creating a new thread and spamming the forums, I hope you can also help with the below.
Link to my issues is here in this thread
http://forum.xda-developers.com/redmi-note/development/rom-aicp-11-dior-t3273430/page3
My post http://forum.xda-developers.com/showpost.php?p=68186362&postcount=27
After trying the CM13 and not being happy with the performance I decided to try aicp 11.00 Dior Nightly but can't install due to error.
I now have a phone with no system on so usesless to me.
I need to get this working today if you or someone could help me.
i made the error of not backing up the CM but I have MIUI backup but dont want to go back to this for fear of Bricking my phone.
Ok, this is where I am at.
I believe my phone is bricked.
I followed online guide to no avail. - http://en.miui.com/thread-235865-1-1.html
I run fasboot then EDL mode but MIflash will not work, please see below picture.
Please help me fix my RN3
Thank you
Garyj881 said:
Ok, this is where I am at.
I believe my phone is bricked.
I followed online guide to no avail. - http://en.miui.com/thread-235865-1-1.html
I run fasboot then EDL mode but MIflash will not work, please see below picture.
Please help me fix my RN3
Thank you
Click to expand...
Click to collapse
Click on browse>advanced and show me what you have selected
justinxfan said:
Click on browse>advanced and show me what you have selected
Click to expand...
Click to collapse
Thank you for your reply, was losing hope
I attached my phone in EDL mode, and this flashes in bottom tray.
This is picture of advanced section.
And again error at end when doing flash.
Thanks again.
I m going to work right now, so wont be able to reply fo 8 hrs
Garyj881 said:
Thank you for your reply, was losing hope
I attached my phone in EDL mode, and this flashes in bottom tray.
This is picture of advanced section.
And again error at end when doing flash.
Thanks again.
I m going to work right now, so wont be able to reply fo 8 hrs
Click to expand...
Click to collapse
That's whats wrong. You have the wrong files selected
fastboot script: flash all.bat
flash programmer go into images folder and select the file named something like firehose 8976 or similar
also for rawprogram and patch find the corresponding xml files in the images folder.
Garyj881 said:
I received my bootloader unlock code yesterday so started the procedure to unlock it.
I got the dreaded 50% error, I fixed this by connecting the phone in fastboot to the miui sweet where it let me update to the latest version # 7.5. I installed TWRP and then after rebooting I lost wifi and the use of TWRP.
At the moment after spending all morning on the internet looking for answers I am stuck. My phone works but has no wifi and cannot access TWRP.
I have seen there is a tut for the soup kitchen to create a new img file but cannot find the original version I need.
I want to install the CM 13 rom, please someone offer advise on next steps to take.
Thanks
Gary
Click to expand...
Click to collapse
I know this issue. Wait for 3-4 more days. And then again try with Mi Tools and official unlock code. It will work.
Dhananjay Bhosale on youtube explained this problem already.
justinxfan said:
That's whats wrong. You have the wrong files selected
fastboot script: flash all.bat
flash programmer go into images folder and select the file named something like firehose 8976 or similar
also for rawprogram and patch find the corresponding xml files in the images folder.
Click to expand...
Click to collapse
I don't think my pc is seeing my phone correctly.
I load EDL and phone goes black with red flashing led.
When black, I open up MIFlash. I then browse for Kenzo image and click ok then refresh.
I then click advanced and confirm I have chosen correct image, raw and patch file - which I have.
I then click flash and get error as pictured.
So it look likes I was doing everything correct but still doesn't work.
I doesn't show in picture but link to programmer, raw and patch are as follows.
Programmer - C:\Users\Gary\Desktop\kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000.23_5.1_global\images\prog_emmc_firehose_8976_ddr.mbn
Raw - C:\Users\Gary\Desktop\kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000.23_5.1_global\images\rawprogram0.xml
Patch - C:\Users\Gary\Desktop\kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000.23_5.1_global\images\patch0.xml
So I think links are correct.
Before I tried Dior, I updated to V7.5. Image file is for Kenzo V7.3.7.
Not sure if it matters.
justinxfan said:
That's whats wrong. You have the wrong files selected
fastboot script: flash all.bat
flash programmer go into images folder and select the file named something like firehose 8976 or similar
also for rawprogram and patch find the corresponding xml files in the images folder.
Click to expand...
Click to collapse
bravonova said:
I know this issue. Wait for 3-4 more days. And then again try with Mi Tools and official unlock code. It will work.
Dhananjay Bhosale on youtube explained this problem already.
Click to expand...
Click to collapse
Hi Bravonova.
I already fixed this, see http://forum.xda-developers.com/showpost.php?p=68187140&postcount=8
If I get this fixed today, I will donate £10.00 to charity of your choice
Garyj881 said:
I don't think my pc is seeing my phone correctly.
I load EDL and phone goes black with red flashing led.
When black, I open up MIFlash. I then browse for Kenzo image and click ok then refresh.
I then click advanced and confirm I have chosen correct image, raw and patch file - which I have.
I then click flash and get error as pictured.
So it look likes I was doing everything correct but still doesn't work.
I doesn't show in picture but link to programmer, raw and patch are as follows.
Programmer - C:\Users\Gary\Desktop\kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000.23_5.1_global\images\prog_emmc_firehose_8976_ddr.mbn
Raw - C:\Users\Gary\Desktop\kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000.23_5.1_global\images\rawprogram0.xml
Patch - C:\Users\Gary\Desktop\kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000.23_5.1_global\images\patch0.xml
So I think links are correct.
Before I tried Dior, I updated to V7.5. Image file is for Kenzo V7.3.7.
Not sure if it matters.
Click to expand...
Click to collapse
In the browse don't select the images folder select the folder that contains everything.
HI, no difference I'm afraid.
If possible could I add you to Skype for making this easier?
Just noticed in MiFlash for device name it stays as COM3 and doesn#t show device name, could it be that it can't see my devioce properly?
I feel like Im typing to myself here but trying to give as much information as possible.
Reading another unbrick method. It says open adb folder and open cmd with shift. In CMD I type devices, it then say list of devices attached BUT nothing there!
Then I type adb reboot edl - error device (null) not found.
I don't think it sees my phone......
Hopefully that is enough for you to know the problem.
How to fix please?
Garyj881 said:
I don't think my pc is seeing my phone correctly.
I load EDL and phone goes black with red flashing led.
When black, I open up MIFlash. I then browse for Kenzo image and click ok then refresh.
I then click advanced and confirm I have chosen correct image, raw and patch file - which I have.
I then click flash and get error as pictured.
So it look likes I was doing everything correct but still doesn't work.
I doesn't show in picture but link to programmer, raw and patch are as follows.
Programmer - C:\Users\Gary\Desktop\kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000.23_5.1_global\images\prog_emmc_firehose_8976_ddr.mbn
Raw - C:\Users\Gary\Desktop\kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000.23_5.1_global\images\rawprogram0.xml
Patch - C:\Users\Gary\Desktop\kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000.23_5.1_global\images\patch0.xml
So I think links are correct.
Before I tried Dior, I updated to V7.5. Image file is for Kenzo V7.3.7.
Not sure if it matters.
Click to expand...
Click to collapse
If the error shows reached the end you need to restart the pc
And as far as I see from your pics you should extract the tgz rom to C:/ROM/MIUI and all files should be in that
Remember when you extract a file it first creates a folder with the name of the file and then extracts using winRar.
This worked for me
Hit thanks if I helped.
---------- Post added at 08:48 PM ---------- Previous post was at 08:44 PM ----------
How did you fixed the 50% hurdle? By just flashing the latest firmware and then trying to unlock? You did officially unlock right?
B'coz it didn't work for me.
I need these files please if somebody can share:
- modemst1 - modemst2 - fsg
Due to a kake ROM now I have corrupted my EFS partition and need those files to bring alive my device. Please help.
I have found MEE7 files in the web but I guess don't have to use on my phone.
Please, somebody with MEG7 can help me? I will be very glad to buy him a beer.
Hey there! I'm not currently at home now, but I can give you a direct link to NEGMIFA Rom(for Global Version phones), you can extract files you need by yourself.
Download_V9.5.11.0.NEGMIFA (as you can see, its an old version)
OR you can download_fastboot_ROM, and flash it with MiFlashTool, it should solve your problems.
Have a nice day.
P.S. If you cant download something by any reason, I'll make a mirror on googledrive or other filehost in an hour or two when I get at home.
I read somewhere that modemst1 and modemst2 contain IMEI so the rom doesn't have those files.
Fsg is also related to IMEI
Well, as far as I understand your phone not working at all, correct me if I wrong. So my algorithm to make it work is to flash it first(fastboot), doesnt matter with or without your IMEI(I think it'll be 0000), then you can search on xda or whatever, there was a bunch of threads with IMEI "problems", I'm sure you can find the right one.
Have a nice day.
Dunaldo said:
Well, as far as I understand your phone not working at all, correct me if I wrong. So my algorithm to make it work is to flash it first(fastboot), doesnt matter with or without your IMEI(I think it'll be 0000), then you can search on xda or whatever, there was a bunch of threads with IMEI "problems", I'm sure you can find the right one.
Have a nice day.
Click to expand...
Click to collapse
Hi Dunaldo, thanks for your time.
Currently my phone is working on official miui 10 developer rom, it was bricked until I could open the bootloader and install twrp.
Now, the problems I have are:
1.- Baseband "UNKNOW"
2.- When I digit *#06# on the dialer: "UNABLE TO GET IMEI"
So I was reading a lot in the forums, and ,my conclusion is: I have corrupted the EFS partition or probably I lost it, then I need first to solve the "baseband" problem, for that I need the modemst1 - modemst2 - fsg files of my exactly device model and then I can get back mi unique IMEI.
By the way do you have the MEG7 model?
And thanks for your suggestion about flashing fastboot rom, I will try once more, don't think will resolve the efs problem but I'll try anyway.
I have the same problem & i have used the files ur looking for but everytime i restart the phone my baseband again becomes unknown ?? if u want i can give u the file link tomorrow but its no use
Search Qcn file in google for your model . restore it using QPST and write your imei thats all tested MEI7 works perfectly
Any solution?
Heros King said:
I have the same problem & i have used the files ur looking for but everytime i restart the phone my baseband again becomes unknown if u want i can give u the file link tomorrow but its no use
Click to expand...
Click to collapse
Hi,heros
Did u find a solution for this problem?
I tried qpst and qfil and imei is restored but if i restart again ,baseband become unkown again.
If u find anything please help me out i've been stuck in this for almost 3 months
download QualcommIMEIRebuilder and replace yuore ime and inject in qcn file. and use qcfire flash qcn file.
thanks
Dunaldo said:
Hey there! I'm not currently at home now, but I can give you a direct link to NEGMIFA Rom(for Global Version phones), you can extract files you need by yourself.
Download_V9.5.11.0.NEGMIFA (as you can see, its an old version)
OR you can download_fastboot_ROM, and flash it with MiFlashTool, it should solve your problems.
Have a nice day.
P.S. If you cant download something by any reason, I'll make a mirror on googledrive or other filehost in an hour or two when I get at home.
Click to expand...
Click to collapse
thank you . you save my device
mansoor_hana said:
thanks
thank you . you save my device
Click to expand...
Click to collapse
Hey there! I hope you are doing well. Could you please tell me the process? I am be so glad if I can recover this phone. I have similar issues like you.
After unlock, i always do a full backup of all block partitions. It saves many issues
please am new here and really in need of assistance.
i just bought this device two weeks ago (verykool cyprus ll S6005. mt6580. kernel 3.18.19+ masrhmallow 6.0 linux
i tried to root this device with apps both via phone and pc without any result, but meanwhile i made a backup via default cwm which was just the user data since i could not gain access to root at that time. it ended with bootloop when i tried to install twrp. now in the procces of trying to get it back on track, i ended up bricking it. but still produce usb tone when connected to pc. i ended up getting rom but no image in the preloader. and the scatter file has only symbols like this ********************************** throughout. not even one word or number. And file_info also is filled with only symbol. After getting thing bit by bit from internet am at the point where where when i flash the rom, the yellow bar is 100% but this popup error:
ERROR
S_SECURITY_SECURE_USB_DL_DA_RETURN_INVALID_TYPE (6104),MSP ERROR CODE: 0X00)
the solution i tried to apply was to compare similiar device scatter text since i dont have any. thinking since they are of same model, having same kernel....might be of help.
so please i need assistance on how to get it back in working condition. thanks to you in advance.
Please anyone with link for verykool cyprus ll stock/firmware rom for me?
Sent from my SM-G950 using XDA-Developers Legacy app
a7chris said:
Please anyone with link for verykool cyprus ll stock/firmware rom for me?
Click to expand...
Click to collapse
Best would be that this verykool company would give you the right firmware for it...
Could not find s6005, but found another one from verykool - S5524, which is quite similar...
Comparison: https://www.gsmarena.com/compare.php3?idPhone1=8362&idPhone2=8213#diff-
Copied to my mega account because of the adfly crap in the link - and orig. might die someday.
https://mega.nz/#!O1clDIbY!5H-Mag22Khgmuebeezhr4PGY-peJGzWhknyanzGH1I8
(orig. came from here, https://www.needrom.com/download/stock-verykool-s5524/ )
I also saw your hovatek thread in my search results, this https://forum.hovatek.com/thread-26485.html
The partition count matches. Your pics don't show the partition table partitions.
From that S5524 you get a better scatter file. Notice that after userdata
the partition start addresses don't match. So you have to change them
accordingly. (Odd as the internal mem. size is the same...edit: seems that they are from the end <--)
Again do not tick that preloader if it works. S5524's might work or might not,
who knows.... Better avoid using it if not necessary...
BTW, make that firmware file of yours public, if you want it to be checked by someone...
CXZa said:
Best would be that this verykool company would give you the right firmware for it...
Could not find s6005, but found another one from verykool - S5524, which is quite similar...
Comparison: https://www.gsmarena.com/compare.php3?idPhone1=8362&idPhone2=8213#diff-
Copied to my mega account because of the adfly crap in the link - and orig. might die someday.
https://mega.nz/#!O1clDIbY!5H-Mag22Khgmuebeezhr4PGY-peJGzWhknyanzGH1I8
(orig. came from here, https://www.needrom.com/download/stock-verykool-s5524/ )
I also saw your hovatek thread in my search results, this https://forum.hovatek.com/thread-26485.html
The partition count matches. Your pics don't show the partition table partitions.
From that S5524 you get a better scatter file. Notice that after userdata
the partition start addresses don't match. So you have to change them
accordingly. (Odd as the internal mem. size is the same...edit: seems that they are from the end <--)
Again do not tick that preloader if it works. S5524's might work or might not,
who knows.... Better avoid using it if not necessary...
BTW, make that firmware file of yours public, if you want it to be checked by someone...
Click to expand...
Click to collapse
Whaooo. This is so kind of you. Let me try it. But I already ported the preloaded of Cyprus ii jnr S6004. Will it be right if I flash the whole of this similar device S5524? And thanks once again.
Sent from my G3221 using XDA-Developers Legacy app
a7chris said:
Whaooo. This is so kind of you. Let me try it. But I already ported the preloaded of Cyprus ii jnr S6004. Will it be right if I flash the whole of this similar device S5524? And thanks once again.
Click to expand...
Click to collapse
Nope, it might not be a good idea. There is some differences.
In S6004 there is less, so it's probably a better choice.
https://www.gsmarena.com/compare.php3?idPhone1=8363&idPhone2=8213#diff-
Though without knowing the hardwares in these, we are just guessing really...
But both probably have that same scatter you can use with that firmware of yours.
Or is it in a similar mess like its scatter?
If you haven't been able flash anything yet, you could also try to readback
the device and compare it to these different firmwares...
[*]BTW, make that firmware file of yours public, if you want it to be checked by someone...
[/LIST]
[/QUOTE]
Here is the link to the corrupted firmware verykool cyprus ll S6005
https://drive.google.com/file/d/1FkFhCpGrHjqAQ-BhltysKYdS1pK06vqQ/view?usp=sharing
I just did a terrible mistake. I mistakenly flash the whole similar rom of S5524 instead of applying scatter text or preloader with my device firmware. now device is no longer detected by pc. Any solution for this? thanks in advance
a7chris said:
[*]BTW, make that firmware file of yours public, if you want it to be checked by someone...
[/LIST]
Click to expand...
Click to collapse
Here is the link to the corrupted firmware verykool cyprus ll S6005
[/QUOTE]
Okay, checked it with a hex editor. It's all the same. Every file is just some similar
garbage like in that scatter file. Nothing useful in it...
---------- Post added at 13:12 ---------- Previous post was at 12:52 ----------
a7chris said:
I just did a terrible mistake. I mistakenly flash the whole similar rom of S5524 instead of applying scatter text or preloader with my device firmware. now device is no longer detected by pc. Any solution for this? thanks in advance
Click to expand...
Click to collapse
Removing the battery or connecting a testpoint to ground might help.
https://forum.xda-developers.com/showthread.php?t=1943442
Any hardware error probably will do..
edit: If opening the device is difficult, you might try a factory cable first.
No experience about them myself though...
https://forum.xda-developers.com/showthread.php?t=1392693
a7chris said:
I just did a terrible mistake. I mistakenly flash the whole similar rom of S5524 instead of applying scatter text or preloader with my device firmware. now device is no longer detected by pc. Any solution for this? thanks in advance
Click to expand...
Click to collapse
Oh thank God! was able to get the tone back and flash my firmware using similar device's scatter text and preloader. Thank Jesus i did not apply format and download mode. I applied download only. could been worst i guess if format and download mode was applied. All thesame. NO POWER
I flashed similar device's S5524 scatter text but still no power. You will notice that the preloader in the firmware is as well corrupt. sp flash comes up with pop up error message each time the preloader from in the firmware is been applied. (NO IMAGE IN THE PRELOADER) should i try S5524 preloader?
I would try readback the preloader and check/compare it.
Maybe your battery is totally empty???
CXZa said:
I would try readback the preloader and check/compare it.
Maybe your battery is totally empty???
Click to expand...
Click to collapse
So, to do it, you change the region to boot1 and lenght 0x40000 that you get from the scatter file.
And notice that there is 2048 bytes extra at the start when comparing the dump to the one that is in those flashable packages, S5524's, S6004's or whatever.
CXZa said:
I would try readback the preloader and check/compare it.
Maybe your battery is totally empty???
Click to expand...
Click to collapse
Thank you very much
Sent from my G3221 using XDA-Developers Legacy app
CXZa said:
I would try readback the preloader and check/compare it.
Maybe your battery is totally empty???
Click to expand...
Click to collapse
Really? If device is in bricked mode will it still be able charge the battery, despite not been able to turn on?
Sent from my G3221 using XDA-Developers Legacy app
Please how do I change the wrong flashed preloaded in my device? The similar device's preloader (veryKool Cyprus ll jnr s6004) seems to have taken over. every attempts to flash ends up with flash tool error code 4032. Thanks
Sent from my G3221 using XDA-Developers Legacy app
CXZa said:
So, to do it, you change the region to boot1 and lenght 0x40000 that you get from the scatter file.
And notice that there is 2048 bytes extra at the start when comparing the dump to the one that is in those flashable packages, S5524's, S6004's or whatever.
Click to expand...
Click to collapse
You mean in the scatter text file?
Sent from my G3221 using XDA-Developers Legacy app
Why is it that I cannot format my device with it's downloaded firmware except through similar device's firmware?
Sent from my G3221 using XDA-Developers Legacy app
a7chris said:
Why is it that I cannot format my device with it's downloaded firmware except through similar device's firmware?
Click to expand...
Click to collapse
As I said before, that firmware package of yours s6005 is total mess.
None of its files are correct, just some random garbage.
You seem to have done a lot after that mistakenly made full flash.
Hard to say what's in it if it's giving flashing errors and all...
Found possible source for s6005 firmware. Only but is the forum rules.
One cannot download until enough thanks and other activity.
But you probably can ask it anyway. Forum's language is Spanish....
https://www.clangsm.com/forum/index.php?showtopic=492197&view=findpost&p=1880525
CXZa said:
As I said before, that firmware package of yours s6005 is total mess.
None of its files are correct, just some random garbage.
You seem to have done a lot after that mistakenly made full flash.
Hard to say what's in it if it's giving flashing errors and all...
Found possible source for s6005 firmware. Only but is the forum rules.
One cannot download until enough thanks and other activity.
But you probably can ask it anyway. Forum's language is Spanish....
https://www.clangsm.com/forum/index.php?showtopic=492197&view=findpost&p=1880525
Click to expand...
Click to collapse
Whaoo. Thanks let me check it
Sent from my G3221 using XDA-Developers Legacy app
CXZa said:
As I said before, that firmware package of yours s6005 is total mess.
None of its files are correct, just some random garbage.
You seem to have done a lot after that mistakenly made full flash.
Hard to say what's in it if it's giving flashing errors and all...
Found possible source for s6005 firmware. Only but is the forum rules.
One cannot download until enough thanks and other activity.
But you probably can ask it anyway. Forum's language is Spanish....
https://www.clangsm.com/forum/index.php?showtopic=492197&view=findpost&p=1880525
Click to expand...
Click to collapse
Whaoooo. But will its firmware be able 2 correct the error?
Sent from my G3221 using XDA-Developers Legacy app