verykool s6005 cyprus ii stock rom assistance - Android Q&A, Help & Troubleshooting

please am new here and really in need of assistance.
i just bought this device two weeks ago (verykool cyprus ll S6005. mt6580. kernel 3.18.19+ masrhmallow 6.0 linux
i tried to root this device with apps both via phone and pc without any result, but meanwhile i made a backup via default cwm which was just the user data since i could not gain access to root at that time. it ended with bootloop when i tried to install twrp. now in the procces of trying to get it back on track, i ended up bricking it. but still produce usb tone when connected to pc. i ended up getting rom but no image in the preloader. and the scatter file has only symbols like this ********************************** throughout. not even one word or number. And file_info also is filled with only symbol. After getting thing bit by bit from internet am at the point where where when i flash the rom, the yellow bar is 100% but this popup error:
ERROR
S_SECURITY_SECURE_USB_DL_DA_RETURN_INVALID_TYPE (6104),MSP ERROR CODE: 0X00)
the solution i tried to apply was to compare similiar device scatter text since i dont have any. thinking since they are of same model, having same kernel....might be of help.
so please i need assistance on how to get it back in working condition. thanks to you in advance.

Please anyone with link for verykool cyprus ll stock/firmware rom for me?
Sent from my SM-G950 using XDA-Developers Legacy app

a7chris said:
Please anyone with link for verykool cyprus ll stock/firmware rom for me?
Click to expand...
Click to collapse
Best would be that this verykool company would give you the right firmware for it...
Could not find s6005, but found another one from verykool - S5524, which is quite similar...
Comparison: https://www.gsmarena.com/compare.php3?idPhone1=8362&idPhone2=8213#diff-
Copied to my mega account because of the adfly crap in the link - and orig. might die someday.
https://mega.nz/#!O1clDIbY!5H-Mag22Khgmuebeezhr4PGY-peJGzWhknyanzGH1I8
(orig. came from here, https://www.needrom.com/download/stock-verykool-s5524/ )
I also saw your hovatek thread in my search results, this https://forum.hovatek.com/thread-26485.html
The partition count matches. Your pics don't show the partition table partitions.
From that S5524 you get a better scatter file. Notice that after userdata
the partition start addresses don't match. So you have to change them
accordingly. (Odd as the internal mem. size is the same...edit: seems that they are from the end <--)
Again do not tick that preloader if it works. S5524's might work or might not,
who knows.... Better avoid using it if not necessary...
BTW, make that firmware file of yours public, if you want it to be checked by someone...

CXZa said:
Best would be that this verykool company would give you the right firmware for it...
Could not find s6005, but found another one from verykool - S5524, which is quite similar...
Comparison: https://www.gsmarena.com/compare.php3?idPhone1=8362&idPhone2=8213#diff-
Copied to my mega account because of the adfly crap in the link - and orig. might die someday.
https://mega.nz/#!O1clDIbY!5H-Mag22Khgmuebeezhr4PGY-peJGzWhknyanzGH1I8
(orig. came from here, https://www.needrom.com/download/stock-verykool-s5524/ )
I also saw your hovatek thread in my search results, this https://forum.hovatek.com/thread-26485.html
The partition count matches. Your pics don't show the partition table partitions.
From that S5524 you get a better scatter file. Notice that after userdata
the partition start addresses don't match. So you have to change them
accordingly. (Odd as the internal mem. size is the same...edit: seems that they are from the end <--)
Again do not tick that preloader if it works. S5524's might work or might not,
who knows.... Better avoid using it if not necessary...
BTW, make that firmware file of yours public, if you want it to be checked by someone...
Click to expand...
Click to collapse
Whaooo. This is so kind of you. Let me try it. But I already ported the preloaded of Cyprus ii jnr S6004. Will it be right if I flash the whole of this similar device S5524? And thanks once again.
Sent from my G3221 using XDA-Developers Legacy app

a7chris said:
Whaooo. This is so kind of you. Let me try it. But I already ported the preloaded of Cyprus ii jnr S6004. Will it be right if I flash the whole of this similar device S5524? And thanks once again.
Click to expand...
Click to collapse
Nope, it might not be a good idea. There is some differences.
In S6004 there is less, so it's probably a better choice.
https://www.gsmarena.com/compare.php3?idPhone1=8363&idPhone2=8213#diff-
Though without knowing the hardwares in these, we are just guessing really...
But both probably have that same scatter you can use with that firmware of yours.
Or is it in a similar mess like its scatter?
If you haven't been able flash anything yet, you could also try to readback
the device and compare it to these different firmwares...

[*]BTW, make that firmware file of yours public, if you want it to be checked by someone...
[/LIST]
[/QUOTE]
Here is the link to the corrupted firmware verykool cyprus ll S6005
https://drive.google.com/file/d/1FkFhCpGrHjqAQ-BhltysKYdS1pK06vqQ/view?usp=sharing

I just did a terrible mistake. I mistakenly flash the whole similar rom of S5524 instead of applying scatter text or preloader with my device firmware. now device is no longer detected by pc. Any solution for this? thanks in advance

a7chris said:
[*]BTW, make that firmware file of yours public, if you want it to be checked by someone...
[/LIST]
Click to expand...
Click to collapse
Here is the link to the corrupted firmware verykool cyprus ll S6005
[/QUOTE]
Okay, checked it with a hex editor. It's all the same. Every file is just some similar
garbage like in that scatter file. Nothing useful in it...
---------- Post added at 13:12 ---------- Previous post was at 12:52 ----------
a7chris said:
I just did a terrible mistake. I mistakenly flash the whole similar rom of S5524 instead of applying scatter text or preloader with my device firmware. now device is no longer detected by pc. Any solution for this? thanks in advance
Click to expand...
Click to collapse
Removing the battery or connecting a testpoint to ground might help.
https://forum.xda-developers.com/showthread.php?t=1943442
Any hardware error probably will do..
edit: If opening the device is difficult, you might try a factory cable first.
No experience about them myself though...
https://forum.xda-developers.com/showthread.php?t=1392693

a7chris said:
I just did a terrible mistake. I mistakenly flash the whole similar rom of S5524 instead of applying scatter text or preloader with my device firmware. now device is no longer detected by pc. Any solution for this? thanks in advance
Click to expand...
Click to collapse
Oh thank God! was able to get the tone back and flash my firmware using similar device's scatter text and preloader. Thank Jesus i did not apply format and download mode. I applied download only. could been worst i guess if format and download mode was applied. All thesame. NO POWER

I flashed similar device's S5524 scatter text but still no power. You will notice that the preloader in the firmware is as well corrupt. sp flash comes up with pop up error message each time the preloader from in the firmware is been applied. (NO IMAGE IN THE PRELOADER) should i try S5524 preloader?

I would try readback the preloader and check/compare it.
Maybe your battery is totally empty???

CXZa said:
I would try readback the preloader and check/compare it.
Maybe your battery is totally empty???
Click to expand...
Click to collapse
So, to do it, you change the region to boot1 and lenght 0x40000 that you get from the scatter file.
And notice that there is 2048 bytes extra at the start when comparing the dump to the one that is in those flashable packages, S5524's, S6004's or whatever.

CXZa said:
I would try readback the preloader and check/compare it.
Maybe your battery is totally empty???
Click to expand...
Click to collapse
Thank you very much
Sent from my G3221 using XDA-Developers Legacy app

CXZa said:
I would try readback the preloader and check/compare it.
Maybe your battery is totally empty???
Click to expand...
Click to collapse
Really? If device is in bricked mode will it still be able charge the battery, despite not been able to turn on?
Sent from my G3221 using XDA-Developers Legacy app

Please how do I change the wrong flashed preloaded in my device? The similar device's preloader (veryKool Cyprus ll jnr s6004) seems to have taken over. every attempts to flash ends up with flash tool error code 4032. Thanks
Sent from my G3221 using XDA-Developers Legacy app

CXZa said:
So, to do it, you change the region to boot1 and lenght 0x40000 that you get from the scatter file.
And notice that there is 2048 bytes extra at the start when comparing the dump to the one that is in those flashable packages, S5524's, S6004's or whatever.
Click to expand...
Click to collapse
You mean in the scatter text file?
Sent from my G3221 using XDA-Developers Legacy app

Why is it that I cannot format my device with it's downloaded firmware except through similar device's firmware?
Sent from my G3221 using XDA-Developers Legacy app

a7chris said:
Why is it that I cannot format my device with it's downloaded firmware except through similar device's firmware?
Click to expand...
Click to collapse
As I said before, that firmware package of yours s6005 is total mess.
None of its files are correct, just some random garbage.
You seem to have done a lot after that mistakenly made full flash.
Hard to say what's in it if it's giving flashing errors and all...
Found possible source for s6005 firmware. Only but is the forum rules.
One cannot download until enough thanks and other activity.
But you probably can ask it anyway. Forum's language is Spanish....
https://www.clangsm.com/forum/index.php?showtopic=492197&view=findpost&p=1880525

CXZa said:
As I said before, that firmware package of yours s6005 is total mess.
None of its files are correct, just some random garbage.
You seem to have done a lot after that mistakenly made full flash.
Hard to say what's in it if it's giving flashing errors and all...
Found possible source for s6005 firmware. Only but is the forum rules.
One cannot download until enough thanks and other activity.
But you probably can ask it anyway. Forum's language is Spanish....
https://www.clangsm.com/forum/index.php?showtopic=492197&view=findpost&p=1880525
Click to expand...
Click to collapse
Whaoo. Thanks let me check it
Sent from my G3221 using XDA-Developers Legacy app

CXZa said:
As I said before, that firmware package of yours s6005 is total mess.
None of its files are correct, just some random garbage.
You seem to have done a lot after that mistakenly made full flash.
Hard to say what's in it if it's giving flashing errors and all...
Found possible source for s6005 firmware. Only but is the forum rules.
One cannot download until enough thanks and other activity.
But you probably can ask it anyway. Forum's language is Spanish....
https://www.clangsm.com/forum/index.php?showtopic=492197&view=findpost&p=1880525
Click to expand...
Click to collapse
Whaoooo. But will its firmware be able 2 correct the error?
Sent from my G3221 using XDA-Developers Legacy app

Related

My G9 died! :(

Hi,
I have been updated my G9 device firmware to 4.05. During update everything was ok. After update, a message appears that say "Starting applications". After 15 minutes nothing happened and mistakenly I have restarted my device. After restarting, archos welcome screen appear but nothing occur!
Also I try to fix it by recovery options like:
1- Repair System>Check Disk : No problem found!
2- Upgrade firmware: Downgrade firmware show me error 221 and trying to install 4.05 is successful but after installation my problem exist yet!
3- Format Disk> Reformat Device...: Even I try to reformat it but after reformat and updating firmware, my problem exist.
I'm so upset! Please help me to fix this problem...
is your device fully charged
Shano56 said:
is your device fully charged
Click to expand...
Click to collapse
Before update, it was 88% charged!
Did you try to flash the new official non-rootet rom?
SE-X1 said:
Did you try to flash the new official non-rootet rom?
Click to expand...
Click to collapse
Yes! I try to flash new official by recovery options, "Upgrade firmware" but it show me error 221 and don't flash!
do a re-format device, not an upgrade...it should solve the problem
Masih60 said:
Yes! I try to flash new official by recovery options, "Upgrade firmware" but it show me error 221 and don't flash!
Click to expand...
Click to collapse
That means that the fw is corrup or that tne filename is wrong, all you have to do is re-download the firmware and make shure that the filename is correct (without a "2" or any other number at the end that indicates it was the second firmware file in the donload folder)... so reformat your device and retry.
Hope I helped,
Tom
mmmm... I'm noob at handhelds but it seems that a part of my device that boot it has been damaged and I don't know how to fix it...
Masih60 said:
mmmm... I'm noob at handhelds but it seems that a part of my device that boot it has been damaged and I don't know how to fix it...
Click to expand...
Click to collapse
what is the name of the file you are using?
pbarbosa said:
do a re-format device, not an upgrade...it should solve the problem
Click to expand...
Click to collapse
Dear friend, I told that...
3- Format Disk> Reformat Device...: Even I try to reformat it but after reformat and updating firmware, my problem exist.
Anyway... Thanks for trying to help!
pbarbosa said:
what is the name of the file you are using?
Click to expand...
Click to collapse
It's: "firmware_archos_it4.aos"
TjaXanK said:
That means that the fw is corrup or that tne filename is wrong, all you have to do is re-download the firmware and make shure that the filename is correct (without a "2" or any other number at the end that indicates it was the second firmware file in the donload folder)... so reformat your device and retry.
Hope I helped,
Tom
Click to expand...
Click to collapse
I hope so man! Now I'm going to download new firmware from: update.archos.com/9/gen9/gen9_3.2.80-2/firmware_archos_it4.aos
But I have still have a question: Why this happened?
Masih60 said:
mmmm... I'm noob at handhelds but it seems that a part of my device that boot it has been damaged and I don't know how to fix it...
Click to expand...
Click to collapse
Try what i told you to do... that error means there is a prblem with the update file, so either it's corrupt or the file name is wrong
HI !
Please ..can you try also ? - press 10 sec. on power ( until the green light closed).... now .. while pres volume down ...press power ( and don't release ) until you will entry in recovery (SDE) ! Now try to do Format System-> Reformat Device-> I Understand -> OK! and wait a while until a new driver appear - > now copy Stock Archos ICS 4.0.5 .aos file into it and flash ! I hope will work this method ! Good luck.
Now I'm going to download new firmware from: update.archos.com/9/gen9/gen9_3.2.80-2/firmware_archos_it4.aos
But I have still have a question: Why this happened?
Whats that for a link?
Seems for me that MIGHT be a firmware NOT for our devices ????
svennimann said:
Now I'm going to download new firmware from: update.archos.com/9/gen9/gen9_3.2.80-2/firmware_archos_it4.aos
But I have still have a question: Why this happened?
Whats that for a link?
Seems for me that MIGHT be a firmware NOT for our devices ????
Click to expand...
Click to collapse
use this instead
http://update.archos.com/9/gen9/gen9_4.0.5/firmware_archos_it4.aos
Masih60 said:
I hope so man! Now I'm going to download new firmware from: update.archos.com/9/gen9/gen9_3.2.80-2/firmware_archos_it4.aos
Click to expand...
Click to collapse
Which tools do you use for download? I had the same error 221 and then I read somewhere (maybe in this forum) that Mozilla actually recognizes the archive format, unpacks the file for virus check (or whatever else), and then re-packs it. But the original file is digitally sighed by Archos, and the repacked one is not. That is why the updater rejects it. Since that, I did a couple of successful upgrades using the most basic tool, wget, to download the file to my PC first. Try this.
The following seems to be the result of the bad update script. Which version did you start from? Not too old? It looks like the script deleted the existing software first, then checked the new file, and rejected it - and what to do next?
ps. If someone definitely knows that the above reasoning about download is wrong, please let us know this - not to spread this rumour any longer.
use
RECOVEY (ON OFF/ VOL -),
RESET ANDROID via REPAIR SYSTEM and FORMAT SYSTEM.
Install the firmware
Thanks everyone! Thanks so much. I solved my problem and my device go on! And now we can go to second step...
Please check this topic and help me again:
http://forum.xda-developers.com/showthread.php?p=24035091#post24035091
Thanks so much again!
Masih60 said:
Thanks everyone! Thanks so much. I solved my problem and my device go on! And now we can go to second step...
Please check this topic and help me again:
http://forum.xda-developers.com/showthread.php?p=24035091#post24035091
Thanks so much again!
Click to expand...
Click to collapse
Glad to have helped
iourine said:
ps. If someone definitely knows that the above reasoning about download is wrong, please let us know this - not to spread this rumour any longer.
Click to expand...
Click to collapse
Ok, I had time to experiment todaya nd now I do know definitely that I was wrong - at least, for the current version. Downloaded the file a few times by both Mozilla and wget, calculated the checksums - it is identical and successfully recognized by the updater. So the above error is nothing but a spontaneous download error, once it occures - just reload the file. On the other hand, wget is very resilent to transmission errors, so file corruption is less likely while using it.

[NEED HELP] Phone don't want to boot

Hi,
Don't know what happen, why, and what to do, if possible.
I run the last LiquidSmooth version since it's able, no more change, no kernel.
This morning, no problem, some sms, phone calls, play with internet, a normal day in fact. And there are two hours, Idecided to call my wife : no lockscreen, just a blackscreen. So I decided to reboot but nothing. No boot logo, no words, NOTHING. I can't go into recovery or download mode.
Just in case I've ordered a new battery (but the last time I see my battery level this morning there was even more than 60%), but waiting the delivered new one, somebody has an idea? A new battery could help me?
I've tried to charge but nothing (no led, no scrren wake on). I've tried to connect to computer : it search an update for driver : it's writen : "QHSUSB_DLOAD" and after a while it says that no driver can be found. No odin no kies.
Any idea of what happened, or if anyhting is possible (can't buy a new phone).
Thanks
http://forum.xda-developers.com/showthread.php?t=2600869
Sent from my GT-I9205 using Tapatalk
Silesh.Nair said:
http://forum.xda-developers.com/showthread.php?t=2600869
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
really really thanks. I read a lot of differents threads, even considering another phone I don't own, and I thought I've read enough. I'd tried this when back home . thanks again.
Vous êtes bienvenus!!!
Let me know of you need the debrick.IMG. I have one for the I9200. I9205 debrick.img is available in the thread I posted above.
Sent from my GT-I9205 using Tapatalk
So I've read thread, see videos. Now I'm waiting that my pc (which is as fast as a turtle ) backup my sdcard.
I have downoload win32 item and extract.But for debrick.img, the link in first post is not avaible. I've found another file few posts after but it's a *.img.tar file. I am right if I unzip it ? The *.img inside is good to use?
Thanks for the time you spent for me.
Mukiai said:
So I've read thread, see videos. Now I'm waiting that my pc (which is as fast as a turtle ) backup my sdcard.
I have downoload win32 item and extract.But for debrick.img, the link in first post is not avaible. I've found another file few posts after but it's a *.img.tar file. I am right if I unzip it ? The *.img inside is good to use?
Thanks for the time you spent for me.
Click to expand...
Click to collapse
I am uploading it to my mega account. check under DEBRICK/I9205 folder. Should take about 30 minutes to upload. You can also extract the debrick.img from the tar file.
so I've test with your file but doesn't work. I've also tried with the one in the thread , nothing too.
In fact the phone boot but not totaly as it's supposed to do. I press power button then vibrate and then the logo doesn't appear but there is this screen :
Code:
[COLOR="Lime"]BOOT RECOVERY MODE[/COLOR]
CHECK BOOT PARTITIONS. .
COPY FROM T-FLASH. .
WRITE 139008 sectors. .
[COLOR="Red"]FLASH WRITE FAILURE[/COLOR]
ddi : mmc_read failed
[COLOR="red"]ODIN MODE[/COLOR]
PRODUCT NAME: GT-I9205
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
[COLOR="Gray"]QUALCOMM SECUREBOOT: ENABLE
BOOTLOADER AP SWREV: 1[/COLOR]
----------------------------------------
I can't go into any mode (download or recovery), just boot to the screen above.
I've tried to "ODIN" a firmware ( I9205XXUAMG7_I9205XEFAMG1_I9205XXUAMG5_HOME.tar.md5 that I had on pc ) : when plug phone it tells me "added" with blue item (so normal no ? ), *.md5 = good analysis. But when I click on start it tells me that I miss PIT file
Well, you may need to repartition using a I9205 pit file and then try flashing stock rom using Odin. Check with @ValenteL, He's good with things technical. He can provide you with a .pit file too.
Silesh.Nair said:
Well, you may need to repartition using a I9205 pit file and then try flashing stock rom using Odin. Check with @ValenteL, He's good with things technical. He can provide you with a .pit file too.
Click to expand...
Click to collapse
A lot of thanks, I go to see with @ValenteL.
Mukiai said:
A lot of thanks, I go to see with @ValenteL.
Click to expand...
Click to collapse
Did you suxses yet...
Sent from my GT-I9205
shazzl said:
Did you suxses yet...
Sent from my GT-I9205
Click to expand...
Click to collapse
No success yet . I've request him here with a little more explanations I think.
When it happened to you, did you have same problems?
Mukiai said:
No success yet . I've request him here with a little more explanations I think.
When it happened to you, did you have same problems?
Click to expand...
Click to collapse
@Mukiai
if the brick.img create by @ValenteL you shuld used CML1 stock firmware.
If not working you shuld search help from xda member that have the same baseband to flash the brick.img creator and try to flash the same baseband if bmg2 it must be bmj2...
some one have pm me about his brick ths fone I ask for the baseband but the guy don't know...
Then I gave him the brick.img the when re start it stuck at samsung boot logo... I ask him to flash clm1 Stock baseband then the guy just quite.... I don't know it boot or not...check my thread solved hard brick
Sent from my GT-I9205
shazzl said:
@Mukiai
if the brick.img create by @ValenteL you shuld used CML1 stock firmware.
If not working you shuld search help from xda member that have the same baseband to flash the brick.img creator and try to flash the same baseband if bmg2 it must be bmj2...
some one have pm me about his brick ths fone I ask for the baseband but the guy don't know...
Then I gave him the brick.img the when re start it stuck at samsung boot logo... I ask him to flash clm1 Stock baseband then the guy just quite.... I don't know it boot or not...check my thread solved hard brick
Sent from my GT-I9205
Click to expand...
Click to collapse
I've seen it but he didn't reply you, no? maybe he answer you by PM.
I don't know if bmj2 or not. I've several firmware on pc and can't remember the last I flash (when phone ran well ) than i flashed some custom rom (in fact all cm11, BS, Mokee, etc, etc, until I flash latest LisuidSmooth. As it run well I just keep it (waiting the version of BS that @Silesh.Nair make able today... arghhhhh ).
So, I'm little disappointed.
Where did you get the brick.img
Sent from my GT-I9205
shazzl said:
Where did you get the brick.img
Sent from my GT-I9205
Click to expand...
Click to collapse
The link from your first post in your thread didn't work so i've tried with one few posts later. And also test with one from @Silesh.Nair. I tested with two differents sd . The two are 16go : one class4 and one class 10.
Is it normal that after use win32 item , the properties of my sd says that the size is in mb (near 16 mb are free and 47 mb are usedand capacity total 64mb : a deep hole from 16gb???? )?
in attachment : files on sd after win32 item : just one folder named "/image" and inside there are those files on screenshots.
Try to flash CML1 FRAMEWARE...
shazzl said:
Try to flash CML1 FRAMEWARE...
Click to expand...
Click to collapse
I have to wait some hours that it downloads
wainting, i'll try @ValenteL answer
Mukiai said:
Is it normal that after use win32 item , the properties of my sd says that the size is in mb (near 16 mb are free and 47 mb are usedand capacity total 64mb : a deep hole from 16gb???? )?
Click to expand...
Click to collapse
It's normal. The sdcard have 17 partitions but the windows only see the first from 64 MB. 16 are hidden for windows.
You can see them on Control Panel / Admnistrative Tools / Computer Management / Storage / Disk Management (local) ...
and here You see the sdcard, may be F: whit 17 partitions.
Power off on Mega, put the sdcard, Power and must be something to work on it. It write the first 128 MB from emmc, pit file included. And use the guide from @shazzl .
Here I can't help more because I never had a hard brick and not make all process. I made only the sdcard to debrick and analyzed it on Pc.
ValenteL said:
It's normal. The sdcard have 17 partitions but the windows only see the first from 64 MB. 16 are hidden for windows.
You can see them on Control Panel / Admnistrative Tools / Computer Management / Storage / Disk Management (local) ...
and here You see the sdcard, may be F: whit 17 partitions.
Power off on Mega, put the sdcard, Power and must be something to work on it. It write the first 128 MB from emmc, pit file included. And use the guide from @shazzl .
Here I can't help more because I never had a hard brick and not make all process. I made only the sdcard to debrick and analyzed it on Pc.
Click to expand...
Click to collapse
I'm so bad didn't think about this elementary thing (for partitions not seeing)
I made it, tried severals times, with different sd, but everytime same thing. @Silesh.Nair gave me that links to @shazzl then purpose me to contact you. I've tried after reading and see video. But without the same success.
Mukiai said:
I'm so bad didn't think about this elementary thing (for partitions not seeing)
I made it, tried severals times, with different sd, but everytime same thing. @Silesh.Nair gave me that links to @shazzl then purpose me to contact you. I've tried after reading and see video. But without the same success.
Click to expand...
Click to collapse
Dose it boot yet..
Sent from my GT-I9205 using xda app-developers app

[Q&A] Elephone P6000 mtk6732 64bit SP Flash Tool

Q&A for Elephone P6000 mtk6732 64bit SP Flash Tool
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Elephone P6000 mtk6732 64bit SP Flash Tool. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
SPFlashtooll Elephone P6000
Please, write me how did you backup firmware Elephone P6000?
The OP has been updated so Please review this Many Thanks to all​
no really noob...
Hi bigrammy,
i can´t brick my phone you know, and i have used any time tools like SP Flash Tool, send me please a link to you files and i will make a first test after i have check any files 1to1 to my files i have read out.
regards
TM
video tut on youtube
See main post for links Enjoy.
Questions to this thread.
sawok said:
Hi bigrammy,
i can´t brick my phone you know, and i have used any time tools like SP Flash Tool, send me please a link to you files and i will make a first test after i have check any files 1to1 to my files i have read out.
regards
TM
Click to expand...
Click to collapse
TUT Main post.
good news , but
Hi bigrammy, or anybody else,
can you send me your Backup, my P6000 need this one for unbricking.....
THX
sawok said:
Hi bigrammy, or anybody else,
can you send me your Backup, my P6000 need this one for unbricking.....
THX
Click to expand...
Click to collapse
Do you know what gets encrypted exactly You will need to be specific so do some research first :good:
If I were you I would just return it to Elephone because your problem is their fault 100% and not many will share their userdata normally
See this thread HERE maybe this is the same problem you have.
Ok
bigrammy said:
Do you know what gets encrypted exactly You will need to be specific so do some research first :good:
If I were you I would just return it to Elephone because your problem is their fault 100% and not many will share their userdata normally
See this thread xxx maybe this is the same problem you have.
Click to expand...
Click to collapse
have read this...
Hi, i understand, it is long time and much money for sending the phone from germany to china and back, i hoped , you have i clean backup without any personality data of you .
Perhaps you can send system.img i flash it with your scatter.txt and i test it help or not?
Can i upload my parts of *.img that i have read out, and you can see wich part is need to reflash ?
TM
sawok said:
have read this...
Hi, i understand, it is long time and much money for sending the phone from germany to china and back, i hoped , you have i clean backup without any personality data of you .
Perhaps you can send system.img i flash it with your scatter.txt and i test it help or not?
Can i upload my parts of *.img that i have read out, and you can see wich part is need to reflash ?
TM
Click to expand...
Click to collapse
Ok try to boot to recovery using adb.
1. Start MTKDroid tools.
2. Push the adb button on the bottom right corner of droid tools
3. start your phone while connected to the pc
4. watch to see if droid tools loads your phone info :fingers-crossed:
5. If it does go to the adb command prompt and enter.
Code:
adb reboot recovery
Wipe everything you can from the options in recovery.
It can take a while so go have a cup of tea.
:fingers-crossed:
hmmm
bigrammy said:
Ok try to boot to recovery using adb.
1. Start MTKDroid tools.
2. Push the adb button on the bottom right corner of droid tools
3. start your phone while connected to the pc
4. watch to see if droid tools loads your phone info :fingers-crossed:
5. If it does go to the adb command prompt and enter.
Code:
adb reboot recovery
Wipe everything you can from the options in recovery.
It can take a while so go have a cup of tea.
:fingers-crossed:
Click to expand...
Click to collapse
Yes i do that yesterday with the same result and read out over adb :boot.img, cache.img, lk.bin, logo.bin, preloader.bin, recovery.img, secro.img, system.img, userdata.img and proc/partinfo, that shows the memory mapping same as in your scatter.txt, i have check it in MTKDroid Tools.
now i wisch any *.img flash seperatly to the phone with your scatter.txt and show wich *.img is damaged to unbrick my phone.
i ask you to send me any or all *.img from your running phone, so i can test it, but any complet rom also can help.
bigrammy, without any file from running P6000, a can´t unbrick this phone , but also a stock-rom can help.
you will not send anything, you can not help me at the moment.
good day so long.
TM
Verify all backups
Important Note: When you backup the system.img make sure to set it large enough to capture all the data on the partition if unsure just backup the entire system partition
Please use Hex Edit to quickly verify the read backs have captured all data !!!!
See Photo
Free version can be found here: http://www.hexedit.com/index.html
Great online Hex to file size and vice versa (other way around) MB, GB etc is HERE THANKS TO THEM FOR THAT :good:
enr88 said:
Ok, i m a noob with Mtk devices..but i've experience on modding with other android phone..... proc/partinfo give me the same result on partion size ecc...
but
Only one thing I did not understand,
I have to connect the device without a battery, right?
Connecting the device without battery, despite having installed the drivers Vcom, I see that the device is recognized for 2 seconds then disconnects automatically, then again recognized .. is this normal behavior?
thx for your work :good::good:
Click to expand...
Click to collapse
I Missed your post
In Future please use the Q&A bro just read the OP above.
To answer your question: When the progress bar in flashtool turns red put in your battery quickly I have mine ready and just slightly away from the contacts.
When done it will now hold it on until the end of the read backs.
I will copy this to the Q&A HERE
---------- Post added at 01:23 AM ---------- Previous post was at 12:58 AM ----------
sawok said:
Yes i do that yesterday with the same result and read out over adb :boot.img, cache.img, lk.bin, logo.bin, preloader.bin, recovery.img, secro.img, system.img, userdata.img and proc/partinfo, that shows the memory mapping same as in your scatter.txt, i have check it in MTKDroid Tools.
now i wisch any *.img flash seperatly to the phone with your scatter.txt and show wich *.img is damaged to unbrick my phone.
i ask you to send me any or all *.img from your running phone, so i can test it, but any complet rom also can help.
bigrammy, without any file from running P6000, a can´t unbrick this phone , but also a stock-rom can help.
you will not send anything, you can not help me at the moment.
good day so long.
TM
Click to expand...
Click to collapse
Bro why should I share everything
I use the phone everyday for developing and for personal use too.
It's 99.9% certain that the encryption app screwed the userdata and as I have said I will not share this.
I dont want to factory reset the phone until I have done the with Development work
For you to sulk with me is not very fair I am sure someone will upload a copy to needrom.com very soon now we have the Tool.
still wait for P6000 ROM
bigrammy said:
I Missed your post
In Future please use the Q&A bro just read the OP above.
To answer your question: When the progress bar in flashtool turns red put in your battery quickly I have mine ready and just slightly away from the contacts.
When done it will now hold it on until the end of the read backs.
I will copy this to the Q&A HERE
---------- Post added at 01:23 AM ---------- Previous post was at 12:58 AM ----------
Bro why should I share everything
I use the phone everyday for developing and for personal use too.
It's 99.9% certain that the encryption app screwed the userdata and as I have said I will not share this.
I dont want to factory reset the phone until I have done the with Development work
For you to sulk with me is not very fair I am sure someone will upload a copy to needrom.com very soon now we have the Tool.
Click to expand...
Click to collapse
no problem...YOU say
I will share when everything works as it should so you will be able to fix your brick
but i waiting for brother that can make backup, factory reset to make clean backup and then restore first backup , i will not any personality data from anyone :cyclops:
bigrammy THX for scatter.txt
(Solved finger trouble) Userdata!!!! Wrong size????
WARNING!!! The Start Address of the USERDATA is WRONG or NOT WHAT I WANT!!! IT will give you a 12GB Backup THIS NEEDS TO BE CORRECTED it also needs to be corrected on the SCATTER FILE!!!
I have noticed while making a Backup of the USERDATA it produced a 12GB backup using the /partinfo information from the phone. This is just a full Phone Backup pretty much. ROM Dump It may be handy to Restore a device but must be wrong for just capturing the actual userdata info
So How do we find the ACTUAL Userdata Maybe this is the reason why MTKDroidTools stopped doing userdata backups in later versions
So I need to do some more digging around.
Any Help regarding this will be appreciated :good:
Panic over guys I forgot to Name the readback userdata.img It seems when you forget to name it eg: leave it as ROM_0 the flashtool will ignore your inputs and just dump the whole ROM. :laugh: Still 6GB though
You can use this handy online Hex converter which will give you the hex value of a size or vice versa. Here and thanks to them for the easy to use tool :good:
Hi bigrammy, another noob/dumb question regarding how to make full backup of my device... What I have to backup with spflashtool to have a complete backup of the phone?
I have to proceed individually for each "partition" boot, recovery etc ..?
And sorry for the first question..thinking of post it on q&a thread
enr88 said:
Hi bigrammy, another noob/dumb question regarding how to make full backup of my device... What I have to backup with spflashtool to have a complete backup of the phone?
I have to proceed individually for each "partition" boot, recovery etc ..?
And sorry for the first question..thinking of post it on q&a thread
Click to expand...
Click to collapse
Yes bro you can and probably should readback all partitions manually just once for safe keeping :good:
MTKDroidtools used to do everything for you but with our phone you must do it manually now :crying:
Remember to increase the system.img size to at least 1GB to be sure you capture all the data mine is around 0.95GB actual size at the moment but remember it will increase as you install more things app updates etc etc
I have attached a picture below.
bigrammy said:
Yes bro you can and probably should readback all partitions manually just once for safe keeping :good:
MTKDroidtools used to do everything for you but with our phone you must do it manually now :crying:
Remember to increase the system.img size to at least 1GB to be sure you capture all the data mine is around 0.95GB actual size at the moment but remember it will increase as you install more things app updates etc etc
I have attached a picture below.
Click to expand...
Click to collapse
i'm trying to do a test backup of cache.img, after 12min it's still with read download( i put my battery in phone when i saw the red download bar), also the speed seem blocked at 1,20 mb/s..
https://onedrive.live.com/redir?res...authkey=!AJbyot7NvHpg3_k&v=3&ithint=photo,png
enr88 said:
i'm trying to do a test backup of cache.img, after 12min it's still with read download( i put my battery in phone when i saw the red download bar), also the speed seem blocked at 1,20 mb/s..
https://onedrive.live.com/redir?res...authkey=!AJbyot7NvHpg3_k&v=3&ithint=photo,png
Click to expand...
Click to collapse
Just stop it and retry in a different usb port also make sure you run the flashtool as administrator (Right click flashtool.exe select run as administrator)
bigrammy said:
Just stop it and retry in a different usb port also make sure you run the flashtool as administrator (Right click flashtool.exe select run as administrator)
Click to expand...
Click to collapse
No luck tried different usb port, 2.0 and also 3.0 usb. also tried to backup recovery.img like you do in your video tut but no luck again..
Can u address me to a correct driver file, and all necessary files, maybe i download and install different one..
Ps. i have a windows 8.1 x64 laptop

Installed wrong ROM

I accidentally used the ROM a rom of the S7 MT6580, to flash my note 7 (Clone) n930f MT6580 with sp flash tool.
Now my phone is stocked at the Android boot logo & sometimes it wont even start. How can I solve this issue or is there a correct ROM for my phone?
Another rom that is suitable is fine to if I can install that without having ADB/download modus on(not possible).
You will be hard pressed as cline devices use a hacked together version of Android and almost never post the files due to copyright lawsuits.
Also xda doesn't deal with knock offs.
ozkanreyes said:
I accidentally used the ROM a rom of the S7 MT6580, to flash my note 7 (Clone) n930f MT6580 with sp flash tool.
Now my phone is stocked at the Android boot logo & sometimes it wont even start. How can I solve this issue or is there a correct ROM for my phone?
Another rom that is suitable is fine to if I can install that without having ADB/download modus on(not possible).
Click to expand...
Click to collapse
Try to flash it with the stock rom suited for your device. If it does not solve the problem, try to post in a thread related to your device and its problems The thread should have many replies for a higher chance that your question to be noticed by other members.
bricked13 said:
Try to flash it with the stock rom suited for your device. If it does not solve the problem, try to post in a thread related to your device and its problems The thread should have many replies for a higher chance that your question to be noticed by other members.
Click to expand...
Click to collapse
Do you know where I could find the right Rom, I managed to find a "system . img" file. (dont know if it is a right phone, but that one does not have a scatter file in it so don't know how this would work since I don have a working OS to install or use twrp recovery on my phone.
I also discovered a ROM of liniage os that is suitable with my device, but then again I need to have twrp recovery on my device.
ADB and download modus is not possible on my phone unfortunately.
ozkanreyes said:
Do you know where I could find the right Rom, I managed to find a "system . img" file. (dont know if it is a right phone, but that one does not have a scatter file in it so don't know how this would work since I don have a working OS to install or use twrp recovery on my phone.
I also discovered a ROM of liniage os that is suitable with my device, but then again I need to have twrp recovery on my device.
ADB and download modus is not possible on my phone unfortunately.
Click to expand...
Click to collapse
I found a here https://mtkfirmware.blogspot.com/2016/11/samsung-note-7-clone-firmware-mt6580.html you should check it out to see if its your rom. Download it then extract. Most of the time the .rar file contains the SCATTER FILE specifically for that rom. But if it doesn't, just google it.
Hit the thanks button if it helped you! :good:
bricked13 said:
I found a here you should check it out to see if its your rom. Download it then extract. Most of the time the .rar file contains the SCATTER FILE specifically for that rom. But if it doesn't, just google it.
Hit the thanks button if it helped you! :good:
Click to expand...
Click to collapse
This .rar file of this Rom has a password. The password of it is not given.
Do you know it?
ozkanreyes said:
This .rar file of this Rom has a password. The password of it is not given.
Do you know it?
Click to expand...
Click to collapse
Sorry I don't know it. But try these passwords, mtkfirmware.blogspot.com and mtkfirmware. If they don't work. I'll provide you with a new link
bricked13 said:
Sorry I don't know it. But try these passwords, mtkfirmware.blogspot.com and mtkfirmware. If they don't work. I'll provide you with a new link
Click to expand...
Click to collapse
They don't work. If it is possible to provide me with a new link that would be awesome!
ozkanreyes said:
They don't work. If it is possible to provide me with a new link that would be awesome!
Click to expand...
Click to collapse
Try this. But I dont know if its clone
choose any rom from the site.
https://samsung-firmware.org/model/SM-N930F/
How can I access download modus?
The download modus button is not working anymore. Same applies for adb(both where working before )
I can go to the recovery/fastboot/normal mode, but if I select one of the recovery/fastboot/normal not happens and the phone goes out
https://drive.google.com/file/d/0B9pNm-PDZG99eFdWUWJUamdtb1U/view
bricked13 said:
https://drive.google.com/file/d/0B9pNm-PDZG99eFdWUWJUamdtb1U/view
Click to expand...
Click to collapse
This one also has a password!

Redmi 5 plus MEG7 need modem files

I need these files please if somebody can share:
- modemst1 - modemst2 - fsg
Due to a kake ROM now I have corrupted my EFS partition and need those files to bring alive my device. Please help.
I have found MEE7 files in the web but I guess don't have to use on my phone.
Please, somebody with MEG7 can help me? I will be very glad to buy him a beer.
Hey there! I'm not currently at home now, but I can give you a direct link to NEGMIFA Rom(for Global Version phones), you can extract files you need by yourself.
Download_V9.5.11.0.NEGMIFA (as you can see, its an old version)
OR you can download_fastboot_ROM, and flash it with MiFlashTool, it should solve your problems.
Have a nice day.
P.S. If you cant download something by any reason, I'll make a mirror on googledrive or other filehost in an hour or two when I get at home.
I read somewhere that modemst1 and modemst2 contain IMEI so the rom doesn't have those files.
Fsg is also related to IMEI
Well, as far as I understand your phone not working at all, correct me if I wrong. So my algorithm to make it work is to flash it first(fastboot), doesnt matter with or without your IMEI(I think it'll be 0000), then you can search on xda or whatever, there was a bunch of threads with IMEI "problems", I'm sure you can find the right one.
Have a nice day.
Dunaldo said:
Well, as far as I understand your phone not working at all, correct me if I wrong. So my algorithm to make it work is to flash it first(fastboot), doesnt matter with or without your IMEI(I think it'll be 0000), then you can search on xda or whatever, there was a bunch of threads with IMEI "problems", I'm sure you can find the right one.
Have a nice day.
Click to expand...
Click to collapse
Hi Dunaldo, thanks for your time.
Currently my phone is working on official miui 10 developer rom, it was bricked until I could open the bootloader and install twrp.
Now, the problems I have are:
1.- Baseband "UNKNOW"
2.- When I digit *#06# on the dialer: "UNABLE TO GET IMEI"
So I was reading a lot in the forums, and ,my conclusion is: I have corrupted the EFS partition or probably I lost it, then I need first to solve the "baseband" problem, for that I need the modemst1 - modemst2 - fsg files of my exactly device model and then I can get back mi unique IMEI.
By the way do you have the MEG7 model?
And thanks for your suggestion about flashing fastboot rom, I will try once more, don't think will resolve the efs problem but I'll try anyway.
I have the same problem & i have used the files ur looking for but everytime i restart the phone my baseband again becomes unknown ?? if u want i can give u the file link tomorrow but its no use
Search Qcn file in google for your model . restore it using QPST and write your imei thats all tested MEI7 works perfectly
Any solution?
Heros King said:
I have the same problem & i have used the files ur looking for but everytime i restart the phone my baseband again becomes unknown if u want i can give u the file link tomorrow but its no use
Click to expand...
Click to collapse
Hi,heros
Did u find a solution for this problem?
I tried qpst and qfil and imei is restored but if i restart again ,baseband become unkown again.
If u find anything please help me out i've been stuck in this for almost 3 months
download QualcommIMEIRebuilder and replace yuore ime and inject in qcn file. and use qcfire flash qcn file.
thanks
Dunaldo said:
Hey there! I'm not currently at home now, but I can give you a direct link to NEGMIFA Rom(for Global Version phones), you can extract files you need by yourself.
Download_V9.5.11.0.NEGMIFA (as you can see, its an old version)
OR you can download_fastboot_ROM, and flash it with MiFlashTool, it should solve your problems.
Have a nice day.
P.S. If you cant download something by any reason, I'll make a mirror on googledrive or other filehost in an hour or two when I get at home.
Click to expand...
Click to collapse
thank you . you save my device
mansoor_hana said:
thanks
thank you . you save my device
Click to expand...
Click to collapse
Hey there! I hope you are doing well. Could you please tell me the process? I am be so glad if I can recover this phone. I have similar issues like you.
After unlock, i always do a full backup of all block partitions. It saves many issues

Categories

Resources