Hi... I was on latest Temasek CM11, and flashed Googy max kernel. I got a bootloop, and touch screen completely unresponsive, even on philz recovery. Tried factory reset, another rom, kernel, etc ... Now the phone boots normally, but no touchscreen at all. I´ve heard about burned touchscreen controller when flashing a wrong recovery or kernel, but it wasn´t the case.
Is there any last solution before replacing the screen (again) ?
Stock rom ???
Yes try stock rom.
pvtnelson said:
Yes try stock rom.
Click to expand...
Click to collapse
Trying ... hard to download 890mb over unstable 3g
But even on Philz recovery I can´t get touchscreen to work
If it doesn't work in recovery then the digitiser is blown, new screen assembly required.
Sent from my GT-I9300 using Tapatalk
agm2112 said:
Trying ... hard to download 890mb over unstable 3g
But even on Philz recovery I can´t get touchscreen to work
Click to expand...
Click to collapse
Flash with odin?
Sent from my GT-I9300 using xda app-developers app
Flashed stock through odin, factory reset, but still no luck... Seems dead. I still dont know why it happened after googy kernel flash.
Sent from my Nexus 4
can software really cause certain hardware to stop working especially the touch and/or LCD ???. because I have a S3 here too, but the problem is I can't see anything but the touch works. phone boots fine an everything. played music (by randomly touching areas of the screen till I heard a song started playing) it makes sounds when I touch tap the screen, vibrates when i'm typing stuff
the person i bought it from says its a software issue. idk if they are lying to me or not. only way I'm gonna know is if I put another motherboard in and see if my screen
turns on. u can try that too if u have a friend or something that has a S3 too, if the touch works with their motherboard, then its either your motherboard or firmware issue
deptic said:
can software really cause certain hardware to stop working especially the touch and/or LCD ???. because I have a S3 here too, but the problem is I can't see anything but the touch works. phone boots fine an everything. played music (by randomly touching areas of the screen till I heard a song started playing) it makes sounds when I touch tap the screen, vibrates when i'm typing stuff
the person i bought it from says its a software issue. idk if they are lying to me or not. only way I'm gonna know is if I put another motherboard in and see if my screen
turns on. u can try that too if u have a friend or something that has a S3 too, if the touch works with their motherboard, then its either your motherboard or firmware issue
Click to expand...
Click to collapse
Its the screen lcd display fault.
Sent from my GT-I9300 using xda app-developers app
Related
Ok guys, i have serious problems here..
I just installed viper rom last night and everything works normally in about 3 hours until i restored my apps by titanium backup then my screen goes blank with capatitive button lights on
But everything seems to work, i turn off screen then turn on again i can feel vibrate for unlock screen. even i got some calls i can accept that. but my screen is full black.
Tried to turn off power, go to bootloader and my screen still black. huh. i push vol down button one time to go to recovery mode and it works, my phone vibate once again.
I hope this is not hardware problems bcz i live in Indonesia and htc Indonesia wont accept my phone to be repaired. Anyone had this issue before?
Thanks before..
For info what i did before:
Flash viper rom
Flash de sense script
Flash swipe to clear
boot normally for some hours until titanium backup process make this thing happens.. :-(
I'm guessing its either swipe to clear or tb that screwed your phone up. Since swipe to clear deals with the screen I'm leaning towads that. Also in your tb backup you restored did you have the ponury gesture app ??? Henceforth you should try a full wipe, if you have a superwipe zip I'd recommend flashing it. Then wipe cache,data,davlik-cache. Then either restore a nand or flash a fresh rom without any mods and see if the issue remains. Also if you restore with tb only restore app not apps+data. Also what rom were you running??
#Root-Hack_Mod*Always\
laie1472 said:
I'm guessing its either swipe to clear or tb that screwed your phone up. Since swipe to clear deals with the screen I'm leaning towads that. Also in your tb backup you restored did you have the ponury gesture app ??? Henceforth you should try a full wipe, if you have a superwipe zip I'd recommend flashing it. Then wipe cache,data,davlik-cache. Then either restore a nand or flash a fresh rom without any mods and see if the issue remains. Also if you restore with tb only restore app not apps+data. Also what rom were you running??
#Root-Hack_Mod*Always\
Click to expand...
Click to collapse
can i control twrp via adb? it seems to hard for me bcz the screen is still black on recovery mode.. :-(
Well in your post you stated that your recovery was working thats why I posted the above post. Are you able to get into fastboot and actually see the screen ???
Also what ver of twrp were you using ???
#Root-Hack_Mod*Always\
laie1472 said:
Well in your post you stated that your recovery was working thats why I posted the above post. Are you able to get into fastboot and actually see the screen ???
Also what ver of twrp were you using ???
#Root-Hack_Mod*Always\
Click to expand...
Click to collapse
i mean everything is works but screen is black. i cant see anything also bootloader and recovery mode. but i believe its works.
go to bootloader by holding vol down and power 5 second then prress vol down then power it boots to recovery mode, i know bcz my phone was vibrate one time, but screen is black.
im on hboot 1.5 so i tried "fastboot boot recovery.img" and my phone vibrate again. i know my phone works normally except the screen is blank.
im using twrp 1.0.3
if the screen is dead why i can stiil recieve call and turn on hotspot?? (i know place of hotspot toggle in quick setting, 2nd row)..
really appreciate all helps..
i feels like on evo 3d blind mode now..
If you're in Indonesia, I'm guessing you have a gsm phone.viperROM is cdma. You'll have to flash a gsm ROM. Your screen issues are probably due to kernel issues.
Vinchenzop said:
If you're in Indonesia, I'm guessing you have a gsm phone.viperROM is cdma. You'll have to flash a gsm ROM. Your screen issues are probably due to kernel issues.
Click to expand...
Click to collapse
no, my phone is cdma unlocked with local network. thats why htc wont accept my phone, they just accept all gsm evo 3d that officially launch here.
anyone can help? please..
It sounds like LCD is bad. The digitizer is good still. You will probably have to order one on eBay and fix it yourself. Sorry man
Sent from my PG86100 using Tapatalk 2
It is the lcd screen. I have a coworker who has the same issue. Can answer calls, but screen dead. You will have to replace the lcd. There are guides and videos on here, so it shouldn't be to hard.
Sent from my PG86100 using XDA App
fr0st420 said:
It sounds like LCD is bad. The digitizer is good still. You will probably have to order one on eBay and fix it yourself. Sorry man
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
unCoRrUpTeD said:
It is the lcd screen. I have a coworker who has the same issue. Can answer calls, but screen dead. You will have to replace the lcd. There are guides and videos on here, so it shouldn't be to hard.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Thanks guys.. altough it was very bad news for me..
but i search in google and i found "black screen of death" discussion..
whats the different with my problems? i have limit english..
Oh i find someone who can help me to replace my lcd..
the price about 80-90$ right???
and there someone who can tell me what is causing my lcd dead?
i dont do anything, im not flasher holic its just happen suddenly..
you are not alone, my phone just did the same thing. i was using it, the screen started flickering and then it just shut off. i can reboot the phone but the screen it self is dead. i guess i have to order a new one on ebay. Let me know if you got your fixed yet.
XsMagical said:
you are not alone, my phone just did the same thing. i was using it, the screen started flickering and then it just shut off. i can reboot the phone but the screen it self is dead. i guess i have to order a new one on ebay. Let me know if you got your fixed yet.
Click to expand...
Click to collapse
Hey bro.. my phone was fixed by replacing the ic display..
I must paid for 80$ for the ic diplay and service..
Sent from my PG86100 using xda premium
Hello
Yesterday, I left my Galaxy S2 for 5 minute only, when I came the screen lights did not work, but I can hear sounds and I can received calls, sms, whatsapp messages ...
I tried to restart may times and replace the battery but still I cant see any thing on the screen. Just I can hear sounds. When I try to touch the black screen I found it worked.
Can any one help me :crying:
ma4ja said:
Hello
Yesterday, I left my Galaxy S2 for 5 minute only, when I came the screen lights did not work, but I can hear sounds and I can received calls, sms, whatsapp messages ...
I tried to restart may times and replace the battery but still I cant see any thing on the screen. Just I can hear sounds. When I try to touch the black screen I found it worked.
Can any one help me :crying:
Click to expand...
Click to collapse
Is there any sign of life in the screen when you reboot the phone?
Do you see the Samsung logo when your phone is starting up?
Sent from my GT-I9100 using Tapatalk 2
ma4ja said:
Hello
Yesterday, I left my Galaxy S2 for 5 minute only, when I came the screen lights did not work, but I can hear sounds and I can received calls, sms, whatsapp messages ...
I tried to restart may times and replace the battery but still I cant see any thing on the screen. Just I can hear sounds. When I try to touch the black screen I found it worked.
Can any one help me :crying:
Click to expand...
Click to collapse
Jokesy said:
Is there any sign of life in the screen when you reboot the phone?
Do you see the Samsung logo when your phone is starting up?
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Any chance you installed Chainfire3D or any other third party GUI/GPU apps??
I've had this problem when using CF3D and just reflashed ROM...
Could try fix permissions in recovery?
Sent from Jelly Fuelled SGS2
Jokesy said:
Is there any sign of life in the screen when you reboot the phone?
Do you see the Samsung logo when your phone is starting up?
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
There is No samsung logo or battery charging. Just sound of the boot animation and other process sounds like calling , sms and whatsapp notification.
Orkane1989 said:
Any chance you installed Chainfire3D or any other third party GUI/GPU apps??
I've had this problem when using CF3D and just reflashed ROM...
Could try fix permissions in recovery?
Sent from Jelly Fuelled SGS2
Click to expand...
Click to collapse
No friend, I did not install any thing for more than a week except whatsapp up date three days a go.
I re-falshed the official IC room but nothing changed.
ma4ja said:
No friend, I did not install any thing for more than a week except whatsapp up date three days a go.
I re-falshed the official IC room but nothing changed.
Click to expand...
Click to collapse
Can you enter recovery? If not it may be hardware related
Sent from Jelly Fuelled SGS2
ma4ja said:
There is No samsung logo or battery charging. Just sound of the boot animation and other process sounds like calling , sms and whatsapp notification.
Click to expand...
Click to collapse
I think it's hardware issue. Send it to repair center if you still have a valid warranty
Sent from my GT-I9100 using Tapatalk 2
Jokesy said:
I think it's hardware issue. Send it to repair center if you still have a valid warranty
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
+1
If no warranty prepare to spend some moneys
Sent from Jelly Fuelled SGS2
Any news on this? I have exactly the same problem. :crying:
Diggensag said:
Any news on this? I have exactly the same problem. :crying:
Click to expand...
Click to collapse
can you enter download/recovery mode ? if you can, flash a stock firmware through odin and see what happens
Poroto said:
can you enter download/recovery mode ? if you can, flash a stock firmware through odin and see what happens
Click to expand...
Click to collapse
I am trying this right now. I don´t think it will help, but it´s my last hope. I believe i have some hardware error.
Anyone have any luck?
quickbird144 said:
Anyone have any luck?
Click to expand...
Click to collapse
I've got the same problem too. I managed to get the phone into download mode (the screen didn't show a thing, but Odin recognized it as "ADDED"). Flahsed an official ICS ROM, but the screen keeps black, but the initialization sound can be heard, and the phone still rings when receiving a call!
Dead hardware...I supose...
ov3r said:
I've got the same problem too. I managed to get the phone into download mode (the screen didn't show a thing, but Odin recognized it as "ADDED"). Flahsed an official ICS ROM, but the screen keeps black, but the initialization sound can be heard, and the phone still rings when receiving a call!
Dead hardware...I supose...
Click to expand...
Click to collapse
I have the same problem as you, but this is something I found out yesterday:
If you go to a dark room, and you turn on your S2, you can see some sort of.. light black/grayish pixel spots over your screen. It is pretty hard to see, that's why you need to be in a dark room.
Did anyone else notice this, or am I the only one?
GameShine said:
I have the same problem as you, but this is something I found out yesterday:
If you go to a dark room, and you turn on your S2, you can see some sort of.. light black/grayish pixel spots over your screen. It is pretty hard to see, that's why you need to be in a dark room.
Did anyone else notice this, or am I the only one?
Click to expand...
Click to collapse
Hi I noticed it too, what I also noticed is that sometimes when using the face unlock on "waking" the phone up with the power key worked, I'm hoping it is not a hardware issue because it's intermittent.
Hi all.
I have this same problem with my screen on sgs2 . Also can see screen in darkness. Sound and phone works fine.
After opening up, came up with this problem
I opened up the back of the phone, to clean off some lint between the camera lens, and the glass on the outside, after closing it, This problem occurred.
The thing is, the touch screen works fine. I can navigate through the phone (using another Galaxy S2 to guide me of course), and everything. I can turn it off and on, etc.
So, this may be a hardware issue, but can someone chime in and let us know the specific hardware issue that may be in play here?
I'm having the same problem. I'm repairing a water damaged phone, and after the cleaning, it would hang on the galaxy S2 logo. I got it into download mode, and left it that way while I was Dling the proper Odin files, but when I came back 15 minutes later, it was a black screen. I finally realized it was still working, and navigated into download mode by memory, and successfully flashed the firmware. But now the screen that was working, refuses to turn on, although the capacitive lights do, and the phone is seemingly working normally.
It seems like it has to be something simple, the LCD shouldn't just die altogether for no reason. I'll keep messing around, and if I figure anything out, I'll report back. Or maybe someone else figures it out, and I can benefit!
As an update, I plugged the non working screen into a working S2, and it showed the Samsung logo on boot up. Then it went black again, but it can still show images, and did it multiple times. So the LCD works, but something is messing it up.
Sent from my HTC One using Tapatalk 4 Beta
Hey guys!
I have the same problem... does anybody have an idea what's happening to our phones?
Not to beat a dead horse but I am trying to recover pictures from my sisters phone. I plugged in a working screen, get the Samsung logo on boot then a low lit black screen however the boot sound still plays, all buttons on the bottom light up and give heptic feedback and so on. I don't have any lcd lights though... Lastly when I have the phone off and plug into the wall I do get the battery charge symbol flash on the screen but then goes back to a black screen and the battery still charges. I plug the phone into a computer and can see it connected although cant get kies to work with it... Any updates from anyone else or ideas? This phone has pictures of her daughter that passed away and are irreplaceable. I am willing to try anything so she can hold onto those memories
simonbarsinistr said:
As an update, I plugged the non working screen into a working S2, and it showed the Samsung logo on boot up. Then it went black again, but it can still show images, and did it multiple times. So the LCD works, but something is messing it up.
Sent from my HTC One using Tapatalk 4 Beta
Click to expand...
Click to collapse
Hello.
I have a problem. It started some time ago but now it gets annoying.
I used Ryze aka Yoda rom and touchscreen stopped working when I press button on top of the phone. I need to push i again and again and then screen works. The most annoying thing is that I have a phone call that is super important but I cant pick it up because the screen doesnt work. When I press the button 2x it drops the call. That is super f*cking annoying.
Now im using helicotper build I start to have the same problem but now my phone dont even turn on. It just stays at HTC logo. I did fresh instal about 5 times but nothing. Is it my phones fault?
I had the screen issue before when I was using Yoda ROM so I tought its ROMs fault. Now it starts to happen in other roms too. Any suggestions? What could be the problem?
Now im using helicotper build I start to have the same problem but now my phone dont even turn on. It just stays at HTC logo. I did fresh instal about 5 times but nothing. Is it my phones fault?
Click to expand...
Click to collapse
This is a separate issue. Sounds like you are not flashing the right kernel or wrong hboot.
I had the screen issue before when I was using Yoda ROM so I tought its ROMs fault. Now it starts to happen in other roms too. Any suggestions? What could be the problem?
Click to expand...
Click to collapse
If it's happening with other roms, it's a hardware failure of the digitizer. Replacing the digitizer is the only way to fix it.
sitlet said:
This is a separate issue. Sounds like you are not flashing the right kernel or wrong hboot.
If it's happening with other roms, it's a hardware failure of the digitizer. Replacing the digitizer is the only way to fix it.
Click to expand...
Click to collapse
The problem is that it starts one time. Phone turns off and next time you turn it on it doesnt get further than HTC.
Probably digitizer costs half price of the phone. -_-
Ok guys i have another question for the experts. Im dealing with this GS i717, the phone was rooted at some point since i found a touch recovery in it when i got it in my hands. Problem or issue is that i got it back to stock ATT and now touch screen is not working at all. Funny thing is that i noticed it wasnt working with the touch recovery but since that recovery looked so weird i thougth it was a matter of incompatibility since ive seen that before with touch recoveries. Anyway, the LCD doesnt look bad at all. In fact theres not even a minor scratch on the phone and or lcd(digitizer). But strange enough the digitizer responds perfectly to the pen. Im asking for help cus this does not look like a hardware issue. Seems to be a matter of configuration or something like that. Any advice??
Which recovery was on there? You may want to download a new ROM and see if you can flash that. And see what happens. Just a thought.
I would try pushing a ICS stock ROM via ODIN to try first.. if that failed, I'd try reverting to gingerbread then updating via kies personally. I'm no expert I promise but that just seems like the only logic I'd try.
Sent from my SGH-I717 using xda app-developers app
---------- Post added at 10:52 AM ---------- Previous post was at 10:52 AM ----------
mahgninnuc93 said:
Which recovery was on there? You may want to download a new ROM and see if you can flash that. And see what happens. Just a thought.
Click to expand...
Click to collapse
It was probably TWRP.
Sent from my SGH-I717 using xda app-developers app
Go to your dialer and press *#2663# and update all the touch firmwares.
Sent from my SAMSUNG-SGH-I717
charlieb620 said:
Go to your dialer and press *#2663# and update all the touch firmwares.
Sent from my SAMSUNG-SGH-I717
Click to expand...
Click to collapse
Awesome.. I didn't think of that lol
Sent from my SGH-I717 using xda app-developers app
Go to your dialer and press *#2663# and update all the touch firmwares.
Click to expand...
Click to collapse
to start i was running padawan flawlessly for almost 2 days when my touch screen failed on a reboot. the only thing that worked was the pen, it led me to this topic. i tried the firmware update, didn't work. spent a few hours looking for a better answer but when i didn't i decided to try again. after updating all 4 of the options the pen stopped working as well. i then installed the original 4.1.2 using Kies hoping to roll back the firmware/drivers or whatever stopped working. this didn't work either now I'm staring at that ridiculous AT&T Ready2Go screen and can not make anything happen with my phone. all 4 of my capacitive buttons register and get me the tactile feedback but do nothing else. i know i'm not that experienced, but this seems to be a software issue somewhere. before i trash the phone or have to pay for a replacement note is there anything else i can try?
If your not under warranty try taking it apart. Maybe you'll find something disconnected. You have nothing to lose.
If you do decide to take it apart, I found this link to be very helpful. (Warning! Autoplay)
440bro said:
If your not under warranty try taking it apart. Maybe you'll find something disconnected. You have nothing to lose.
Click to expand...
Click to collapse
This is a good suggestion because the screen is several layers (glass, digitizer, lcd, capacitive touch, and pen) with connectors for each one, and each layer is independent of the others. A good knocking could loosen a connector.
If that doesn't cure it, a new screen assembly is $160. I just bought one for my N7000 note.
well i've tried everything i could think of and everything i could find on this site. after opening my phone to make sure all connectors were in their proper place i flashed the original stock 2.3.6 OS, no working touch screen. upgraded back to padawan, still no working screen. has anybody ever heard of a way to flash the touch screen drivers, its my last idea other than getting rid of the headache and just waiting until my upgrade
From what you describe, it seems like you are dealing with a dead part. It's not like a PC where you can just install a driver to make the touch screen work.
If you don't want to spend any money to replace the screen, I would sell the phone as it is to recover any money that I can.
charlieb620 said:
Go to your dialer and press *#2663# and update all the touch firmwares.
Sent from my SAMSUNG-SGH-I717
Click to expand...
Click to collapse
CHARLIE, YOU ARE THE MAN!!!!!!!!!!!!!!!!!!!!!!!!!!!!:laugh::fingers-crossed::good::victory:
Note 4 Just Rooted And Flashed CM Custom Rom Now The Screen Calibration Is All Off
Hello I Have A T-Mobile Factory Unlocked Samsung Galaxy Note 4 And Just Rooted It And Flashed CM Custom Rom And now My Touch Screen Is All Off But *#2663# And It Didn't Do Anything.. Please Help If Possible.. Thanks JON
jon.tiff3806 said:
Hello I Have A T-Mobile Factory Unlocked Samsung Galaxy Note 4 And Just Rooted It And Flashed CM Custom Rom And now My Touch Screen Is All Off But *#2663# And It Didn't Do Anything.. Please Help If Possible.. Thanks JON
Click to expand...
Click to collapse
I just had this issue with a Note 4. This is what worked for me. Install Samsung Kies. Go to tools > update firmware. It's going to warn you about erasing everything. Just do it after you backup what you need. It'll download the latest lollipop firmware, boot into download mode, and then flash the firmware. When it reboots, you'll still have the screen issue. Dial *#2663# and update the firmwares. It should work now. Worked for me!
Exact same issue here as well. After rooting my phone and installing CM 12 on it all of a sudden my touchscreen calibration is waaaay off. Its more pronounced the further down the screen you go (ie I click in the 2/3 section top to bottom to click on the actual bottom) but with the s-pen everything is fine. I tried the code dial *#2663# but then I receive the prompt "connection problem or invalid mmi code". I am connected to the mobile network (Rogers in Canada) and mobile data is working without issue. I've tried completely wiping the phone again, all partitions and reformatting system, reflashing CM12 + gapps and still the issue persists. Google-fu isn't turning up with much either, please help!
Thanks!
*#2663* did the Trick! Thanks!
charlieb620 said:
Go to your dialer and press *#2663# and update all the touch firmwares.
Sent from my SAMSUNG-SGH-I717
Click to expand...
Click to collapse
Thank you man, you save my life.
Works with GALAXY NOTE 4
Model: SM-N910T
Baseband version: N910TUVU1ANK4
Kernel version: 3.10.0-2796035
its nt working with my N910G
What do you do if its stuck in recovery and twrp is flashing..
charlieb620 said:
Go to your dialer and press *#2663# and update all the touch firmwares.
Sent from my SAMSUNG-SGH-I717
Click to expand...
Click to collapse
we must update with internet connection ?
I wiped my phone (had lots of problems, phone in boot-loop .. etc.. I "think" it turned out to be a simple hardware problem, the power button is stuck sometimes .. and sometimes it's not.. so got unlucky) ..
anyways I managed to "miraculously" wipe the phone and make it clean .. however another problem popped up.. the screen is working just fine with the display... but once I tried to input with touching it didn't work at all
I installed a CWM touch recovery to test in recovery mode and still the touch is not working..
I think it's a hardware problem, but what exactly could be the problem here?
Usually due to flashing the wrong file, blowing the digitiser. Only fix is a new screen assembly.
alisj99 said:
I wiped my phone (had lots of problems, phone in boot-loop .. etc.. I "think" it turned out to be a simple hardware problem, the power button is stuck sometimes .. and sometimes it's not.. so got unlucky) ..
anyways I managed to "miraculously" wipe the phone and make it clean .. however another problem popped up.. the screen is working just fine with the display... but once I tried to input with touching it didn't work at all
I installed a CWM touch recovery to test in recovery mode and still the touch is not working..
I think it's a hardware problem, but what exactly could be the problem here?
Click to expand...
Click to collapse
try flashing the stock rom again with the wipes once.
if the problem persists, m afraid it would BE a hardware problem.
woh a single flash file can blow your whole screen, that seems weird to me, I've always thought the hardware issues can be caused by software mistakes but not to that extent, I don't think I've installed a wrong file though ..
alisj99 said:
woh a single flash file can blow your whole screen, that seems weird to me, I've always thought the hardware issues can be caused by software mistakes but not to that extent, I don't think I've installed a wrong file though ..
Click to expand...
Click to collapse
I'm sure you fried your Digitiser by flashing wrong file.
See here there are others too.
help_em_up.... said:
try flashing the stock rom again with the wipes once.
if the problem persists, m afraid it would BE a hardware problem.
Click to expand...
Click to collapse
hierarchy666 said:
I'm sure you fried your Digitiser by flashing wrong file.
See here there are others too.
Click to expand...
Click to collapse
I guess you're right on this one.. I was very careful on downloading everything for S3, but I think while desperately searching for a solution I didn't notice a download in one of the CWMs and fried it.. oh well .. everything went down the drain ...
so a replacement of the digitizer shall do? if I could give it to the service repair, not the whole screen, just the digitizer?
or I have to replace the whole screen?
I've said a replacement of a digitzer ONLY would help because I've seen many sites close to my place (Malaysia) offering Digitizer only and they claim it would be help with non-responsive touch issue.
alisj99 said:
I've said a replacement of a digitzer ONLY would help because I've seen many sites close to my place (Malaysia) offering Digitizer only and they claim it would be help with non-responsive touch issue.
Click to expand...
Click to collapse
Just nid to replace the digitizer.
Sent from my SM-N9005 using xda app-developers app