Related
Hi all-!
I have bought HD2 from T-Mobile, but when i using it, i get unexpectedly freezes, and after few restarts I even' can't turn on HD2 fully, it's freezes at "T-Mobile" screen-!
I try to disable Sence from home screen, try to HR, but no luck-!
Radio version:2.15
Rom:3.14
go and insist new replacement
ur set have problem.
believed me. good mainboard will not freeze.
or please check ur radio.
if you are still in stock rom 1st advise is fully recommended.
dont waste time.
shahr321 said:
go and insist new replacement
ur set have problem.
believed me. good mainboard will not freeze.
or please check ur radio.
if you are still in stock rom 1st advise is fully recommended.
dont waste time.
Click to expand...
Click to collapse
What do You think, is it hardware problem or software-!
I can't get new replecement, as I'm in other country right now...
I had unlock code from T-Mobile-!
If i try to flash custom roms, will it work-?
Thank you for your advise Shahr-!
could be overheating (few+ threads on the topic here on xda), if this is the case, then shahr321 is right - mainboard replacement for you,
to check if overheating: let your device cool down a bit (10 minutes in the fridge helps), then start it, install BattClock, set it to display battery temperature and observe if freezes happen at/above the same tmeperature
p107r0 said:
could be overheating (few+ threads on the topic here on xda), if this is the case, then shahr321 is right - mainboard replacement for you,
to check if overheating: let your device cool down a bit (10 minutes in the fridge helps), then start it, install BattClock, set it to display battery temperature and observe if freezes happen at/above the same tmeperature
Click to expand...
Click to collapse
After 10 minutes HD2 turns on, and works fine, but when i start camera recording or play games, it's freezes again, Sence freezes to after few minutes...
Camera can record only 30 sec of video, after that HD2 gets freeze again-!
I used to think positive when anything happen. i always do this steps, first soft reset, if not helping then i do hard reset and if it's still doesn't help finally i do flashing stock ROM. Other than those steps then i'm sure it's hardware problem..it's time to go to nearest service center.
erwinpiero said:
I used to think positive when anything happen. i always do this steps, first soft reset, if not helping then i do hard reset and if it's still doesn't help finally i do flashing stock ROM. Other than those steps then i'm sure it's hardware problem..it's time to go to nearest service center.
Click to expand...
Click to collapse
We do not have service centers in our country, so i need to fix myslef-!
Flashed Radio from 2.15 to 2.12, much better, but still freezes...
I'm in T-Mobile's stock ROM, it's newest ROM, so i can't update, i I can unlock via HSPL3, and flash custom ROMS, what do you think, will it help-?
P.S. I made Hard Reset, but same problem-!
flash custom ROM, if that wont help you gona have to change touch screen (digitizer)
it's common problem
yamFZ6 said:
flash custom ROM, if that wont help you gona have to change touch screen (digitizer)
it's common problem
Click to expand...
Click to collapse
********* Ok, so how is replacing the screen or digitizer going to help with freezing and boot up issues? Not being cynical just curious since I am new to this. Also do you have to replace both screen and digitizer or just digitizer?
Mine will not start ever unless it is coming from freezer. Cool (0-4 Celsius) phone starts just fine in WinMo or Android (I am on Android now) but as soon as it gets worm it shuts off and becomes paperweight.
Any help you can give would be good. Puno Hvala
Bro flash a stock rom... shippedroms.com
Sent from my HTC HD2 using XDA App
solved
Shavkat said:
Hi all-!
I have bought HD2 from T-Mobile, but when i using it, i get unexpectedly freezes, and after few restarts I even' can't turn on HD2 fully, it's freezes at "T-Mobile" screen-!
I try to disable Sence from home screen, try to HR, but no luck-!
Radio version:2.15
Rom:3.14
Click to expand...
Click to collapse
(first try to remove MEM card) it worked for me.
I had the same problem I read on the forum the HTC was giving type 4 MEM cards bc the freezes... however i bought one 4 gb type 4 and no more freezes on WM and Android.
Hello
Yesterday, I left my Galaxy S2 for 5 minute only, when I came the screen lights did not work, but I can hear sounds and I can received calls, sms, whatsapp messages ...
I tried to restart may times and replace the battery but still I cant see any thing on the screen. Just I can hear sounds. When I try to touch the black screen I found it worked.
Can any one help me :crying:
ma4ja said:
Hello
Yesterday, I left my Galaxy S2 for 5 minute only, when I came the screen lights did not work, but I can hear sounds and I can received calls, sms, whatsapp messages ...
I tried to restart may times and replace the battery but still I cant see any thing on the screen. Just I can hear sounds. When I try to touch the black screen I found it worked.
Can any one help me :crying:
Click to expand...
Click to collapse
Is there any sign of life in the screen when you reboot the phone?
Do you see the Samsung logo when your phone is starting up?
Sent from my GT-I9100 using Tapatalk 2
ma4ja said:
Hello
Yesterday, I left my Galaxy S2 for 5 minute only, when I came the screen lights did not work, but I can hear sounds and I can received calls, sms, whatsapp messages ...
I tried to restart may times and replace the battery but still I cant see any thing on the screen. Just I can hear sounds. When I try to touch the black screen I found it worked.
Can any one help me :crying:
Click to expand...
Click to collapse
Jokesy said:
Is there any sign of life in the screen when you reboot the phone?
Do you see the Samsung logo when your phone is starting up?
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Any chance you installed Chainfire3D or any other third party GUI/GPU apps??
I've had this problem when using CF3D and just reflashed ROM...
Could try fix permissions in recovery?
Sent from Jelly Fuelled SGS2
Jokesy said:
Is there any sign of life in the screen when you reboot the phone?
Do you see the Samsung logo when your phone is starting up?
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
There is No samsung logo or battery charging. Just sound of the boot animation and other process sounds like calling , sms and whatsapp notification.
Orkane1989 said:
Any chance you installed Chainfire3D or any other third party GUI/GPU apps??
I've had this problem when using CF3D and just reflashed ROM...
Could try fix permissions in recovery?
Sent from Jelly Fuelled SGS2
Click to expand...
Click to collapse
No friend, I did not install any thing for more than a week except whatsapp up date three days a go.
I re-falshed the official IC room but nothing changed.
ma4ja said:
No friend, I did not install any thing for more than a week except whatsapp up date three days a go.
I re-falshed the official IC room but nothing changed.
Click to expand...
Click to collapse
Can you enter recovery? If not it may be hardware related
Sent from Jelly Fuelled SGS2
ma4ja said:
There is No samsung logo or battery charging. Just sound of the boot animation and other process sounds like calling , sms and whatsapp notification.
Click to expand...
Click to collapse
I think it's hardware issue. Send it to repair center if you still have a valid warranty
Sent from my GT-I9100 using Tapatalk 2
Jokesy said:
I think it's hardware issue. Send it to repair center if you still have a valid warranty
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
+1
If no warranty prepare to spend some moneys
Sent from Jelly Fuelled SGS2
Any news on this? I have exactly the same problem. :crying:
Diggensag said:
Any news on this? I have exactly the same problem. :crying:
Click to expand...
Click to collapse
can you enter download/recovery mode ? if you can, flash a stock firmware through odin and see what happens
Poroto said:
can you enter download/recovery mode ? if you can, flash a stock firmware through odin and see what happens
Click to expand...
Click to collapse
I am trying this right now. I don´t think it will help, but it´s my last hope. I believe i have some hardware error.
Anyone have any luck?
quickbird144 said:
Anyone have any luck?
Click to expand...
Click to collapse
I've got the same problem too. I managed to get the phone into download mode (the screen didn't show a thing, but Odin recognized it as "ADDED"). Flahsed an official ICS ROM, but the screen keeps black, but the initialization sound can be heard, and the phone still rings when receiving a call!
Dead hardware...I supose...
ov3r said:
I've got the same problem too. I managed to get the phone into download mode (the screen didn't show a thing, but Odin recognized it as "ADDED"). Flahsed an official ICS ROM, but the screen keeps black, but the initialization sound can be heard, and the phone still rings when receiving a call!
Dead hardware...I supose...
Click to expand...
Click to collapse
I have the same problem as you, but this is something I found out yesterday:
If you go to a dark room, and you turn on your S2, you can see some sort of.. light black/grayish pixel spots over your screen. It is pretty hard to see, that's why you need to be in a dark room.
Did anyone else notice this, or am I the only one?
GameShine said:
I have the same problem as you, but this is something I found out yesterday:
If you go to a dark room, and you turn on your S2, you can see some sort of.. light black/grayish pixel spots over your screen. It is pretty hard to see, that's why you need to be in a dark room.
Did anyone else notice this, or am I the only one?
Click to expand...
Click to collapse
Hi I noticed it too, what I also noticed is that sometimes when using the face unlock on "waking" the phone up with the power key worked, I'm hoping it is not a hardware issue because it's intermittent.
Hi all.
I have this same problem with my screen on sgs2 . Also can see screen in darkness. Sound and phone works fine.
After opening up, came up with this problem
I opened up the back of the phone, to clean off some lint between the camera lens, and the glass on the outside, after closing it, This problem occurred.
The thing is, the touch screen works fine. I can navigate through the phone (using another Galaxy S2 to guide me of course), and everything. I can turn it off and on, etc.
So, this may be a hardware issue, but can someone chime in and let us know the specific hardware issue that may be in play here?
I'm having the same problem. I'm repairing a water damaged phone, and after the cleaning, it would hang on the galaxy S2 logo. I got it into download mode, and left it that way while I was Dling the proper Odin files, but when I came back 15 minutes later, it was a black screen. I finally realized it was still working, and navigated into download mode by memory, and successfully flashed the firmware. But now the screen that was working, refuses to turn on, although the capacitive lights do, and the phone is seemingly working normally.
It seems like it has to be something simple, the LCD shouldn't just die altogether for no reason. I'll keep messing around, and if I figure anything out, I'll report back. Or maybe someone else figures it out, and I can benefit!
As an update, I plugged the non working screen into a working S2, and it showed the Samsung logo on boot up. Then it went black again, but it can still show images, and did it multiple times. So the LCD works, but something is messing it up.
Sent from my HTC One using Tapatalk 4 Beta
Hey guys!
I have the same problem... does anybody have an idea what's happening to our phones?
Not to beat a dead horse but I am trying to recover pictures from my sisters phone. I plugged in a working screen, get the Samsung logo on boot then a low lit black screen however the boot sound still plays, all buttons on the bottom light up and give heptic feedback and so on. I don't have any lcd lights though... Lastly when I have the phone off and plug into the wall I do get the battery charge symbol flash on the screen but then goes back to a black screen and the battery still charges. I plug the phone into a computer and can see it connected although cant get kies to work with it... Any updates from anyone else or ideas? This phone has pictures of her daughter that passed away and are irreplaceable. I am willing to try anything so she can hold onto those memories
simonbarsinistr said:
As an update, I plugged the non working screen into a working S2, and it showed the Samsung logo on boot up. Then it went black again, but it can still show images, and did it multiple times. So the LCD works, but something is messing it up.
Sent from my HTC One using Tapatalk 4 Beta
Click to expand...
Click to collapse
hi all
recently ive been experiencing an issue where my phone will become completely unresponsive. It never occurs while im using the phone, only when i decide to unlock it i find out its unresponsive. This issue occurs about once a week.
it wont unlock
wont respond to any button presses
charging light wont come on
the only way to resolve it is to take the battery out and put it back in then every is normal. im fully roooted and using the foxhound rom however no one else has reported this issue. Prior to flashing this rom i had done a complete mega wipe.
anyone know what this is or what can be done to resolve it?
ElimElim said:
hi all
recently ive been experiencing an issue where my phone will become completely unresponsive. It never occurs while im using the phone, only when i decide to unlock it i find out its unresponsive. This issue occurs about once a week.
it wont unlock
wont respond to any button presses
charging light wont come on
the only way to resolve it is to take the battery out and put it back in then every is normal. im fully roooted and using the foxhound rom however no one else has reported this issue. Prior to flashing this rom i had done a complete mega wipe.
anyone know what this is or what can be done to resolve it?
Click to expand...
Click to collapse
This happens to my phone too, It is because of the overclocking probably
blakstar said:
This happens to my phone too, It is because of the overclocking probably
Click to expand...
Click to collapse
do you use the same rom?
I wiped my phone (had lots of problems, phone in boot-loop .. etc.. I "think" it turned out to be a simple hardware problem, the power button is stuck sometimes .. and sometimes it's not.. so got unlucky) ..
anyways I managed to "miraculously" wipe the phone and make it clean .. however another problem popped up.. the screen is working just fine with the display... but once I tried to input with touching it didn't work at all
I installed a CWM touch recovery to test in recovery mode and still the touch is not working..
I think it's a hardware problem, but what exactly could be the problem here?
Usually due to flashing the wrong file, blowing the digitiser. Only fix is a new screen assembly.
alisj99 said:
I wiped my phone (had lots of problems, phone in boot-loop .. etc.. I "think" it turned out to be a simple hardware problem, the power button is stuck sometimes .. and sometimes it's not.. so got unlucky) ..
anyways I managed to "miraculously" wipe the phone and make it clean .. however another problem popped up.. the screen is working just fine with the display... but once I tried to input with touching it didn't work at all
I installed a CWM touch recovery to test in recovery mode and still the touch is not working..
I think it's a hardware problem, but what exactly could be the problem here?
Click to expand...
Click to collapse
try flashing the stock rom again with the wipes once.
if the problem persists, m afraid it would BE a hardware problem.
woh a single flash file can blow your whole screen, that seems weird to me, I've always thought the hardware issues can be caused by software mistakes but not to that extent, I don't think I've installed a wrong file though ..
alisj99 said:
woh a single flash file can blow your whole screen, that seems weird to me, I've always thought the hardware issues can be caused by software mistakes but not to that extent, I don't think I've installed a wrong file though ..
Click to expand...
Click to collapse
I'm sure you fried your Digitiser by flashing wrong file.
See here there are others too.
help_em_up.... said:
try flashing the stock rom again with the wipes once.
if the problem persists, m afraid it would BE a hardware problem.
Click to expand...
Click to collapse
hierarchy666 said:
I'm sure you fried your Digitiser by flashing wrong file.
See here there are others too.
Click to expand...
Click to collapse
I guess you're right on this one.. I was very careful on downloading everything for S3, but I think while desperately searching for a solution I didn't notice a download in one of the CWMs and fried it.. oh well .. everything went down the drain ...
so a replacement of the digitizer shall do? if I could give it to the service repair, not the whole screen, just the digitizer?
or I have to replace the whole screen?
I've said a replacement of a digitzer ONLY would help because I've seen many sites close to my place (Malaysia) offering Digitizer only and they claim it would be help with non-responsive touch issue.
alisj99 said:
I've said a replacement of a digitzer ONLY would help because I've seen many sites close to my place (Malaysia) offering Digitizer only and they claim it would be help with non-responsive touch issue.
Click to expand...
Click to collapse
Just nid to replace the digitizer.
Sent from my SM-N9005 using xda app-developers app
Hi... I was on latest Temasek CM11, and flashed Googy max kernel. I got a bootloop, and touch screen completely unresponsive, even on philz recovery. Tried factory reset, another rom, kernel, etc ... Now the phone boots normally, but no touchscreen at all. I´ve heard about burned touchscreen controller when flashing a wrong recovery or kernel, but it wasn´t the case.
Is there any last solution before replacing the screen (again) ?
Stock rom ???
Yes try stock rom.
pvtnelson said:
Yes try stock rom.
Click to expand...
Click to collapse
Trying ... hard to download 890mb over unstable 3g
But even on Philz recovery I can´t get touchscreen to work
If it doesn't work in recovery then the digitiser is blown, new screen assembly required.
Sent from my GT-I9300 using Tapatalk
agm2112 said:
Trying ... hard to download 890mb over unstable 3g
But even on Philz recovery I can´t get touchscreen to work
Click to expand...
Click to collapse
Flash with odin?
Sent from my GT-I9300 using xda app-developers app
Flashed stock through odin, factory reset, but still no luck... Seems dead. I still dont know why it happened after googy kernel flash.
Sent from my Nexus 4
can software really cause certain hardware to stop working especially the touch and/or LCD ???. because I have a S3 here too, but the problem is I can't see anything but the touch works. phone boots fine an everything. played music (by randomly touching areas of the screen till I heard a song started playing) it makes sounds when I touch tap the screen, vibrates when i'm typing stuff
the person i bought it from says its a software issue. idk if they are lying to me or not. only way I'm gonna know is if I put another motherboard in and see if my screen
turns on. u can try that too if u have a friend or something that has a S3 too, if the touch works with their motherboard, then its either your motherboard or firmware issue
deptic said:
can software really cause certain hardware to stop working especially the touch and/or LCD ???. because I have a S3 here too, but the problem is I can't see anything but the touch works. phone boots fine an everything. played music (by randomly touching areas of the screen till I heard a song started playing) it makes sounds when I touch tap the screen, vibrates when i'm typing stuff
the person i bought it from says its a software issue. idk if they are lying to me or not. only way I'm gonna know is if I put another motherboard in and see if my screen
turns on. u can try that too if u have a friend or something that has a S3 too, if the touch works with their motherboard, then its either your motherboard or firmware issue
Click to expand...
Click to collapse
Its the screen lcd display fault.
Sent from my GT-I9300 using xda app-developers app