V2:
It was tested by me only on latest cm10 nightly, but it is possible that it might work on top of other CM10 roms too (reported to work on SJB 8 too).
Install:
0. Make backup
1. install latest cm10 nightly (20131006):
http://download.cyanogenmod.com/?device=smultron
2. flash kernel - DEVICENAME_naaashmem.img
3. flash zip - cm10_enable720p_v2_allinone.zip or cm10_enable720p_v2.zip. The first one includes some useful mods not related to camera, read changelog (Other mods) below! The second one only includes stuff related to camera.
Downloads at:
https://www.mediafire.com/folder/1t1kwpbtbcl6w/cm10v2
Use default camera app for best results!
Changelog:
-enabled video stabilization (forced on for now, might make it optional later)
-disabled face detection in recording mode in default camera app to improve fps, it wasn't working anyway
-no-copy patch for recording buffer to regain ram and improve fps
-use ashmem instead of pmem for graphic buffers to regain even more ram (stock ics does this too). No issues found so far, performance is like before.
-total ram: 412 MB, out of which 4 megs is always allocated for gr. buffers, so 408 MB really
-stock ics like autobrightness enabled
Other mods (only included in cm10_enable720p_v2_allinone.zip):
-electron beam animation
-faster scrolling, reduced scroll friction
-more strick dalvik vm to save 1-1.5 MB ram per app.
-fixed web browser crash on some video sites
Sources:
The kernel is based on
https://github.com/nobodyAtall/msm7x30-2.6.32.x-nAa
The files modified by me can be found at https://www.mediafire.com/folder/m0t4hx8ac4hhz/naa_kernel
The changed files are to be copied here:
arch/arm/mach-msm/
Modified ramdisk file (init.rc) is also uploaded at the same place.
My CM10 patches are here:
https://www.mediafire.com/folder/gw8sy9ozc8cos/sourcepatch
V1:
I have been testing 720p recording in CM10 roms recently. It looks like it is not impossible to reach good fps in CM after all.
It was inspired by the maker of MESA kernel an0nym0us_ who used stock camera lib in cm10. Big thanks to him!
My test rom was SJB 8.0 and CM10 nightly 2013.10.06.
Basically I did 3 modifications:
1. Copied camera.semc.so to /system/lib/hw/
2. Modified media_profiles.xml
3. Modified pmem sizes in kernel. Used nAa kernel as base. Free ram is 388 MB at the moment. Still testing it...
The result is good hd recording at near 29.7 fps. The smoothest results come in the camera app found in Super Jelly Bean 8.0. Other apps like stock CM cam and LGCamera produce around 25-27 fps but it can be improved with a tweak.
So here is what to do:
1. Flash kernel (mini_naa720p.img or minipro_naa720p.img or lww_naa720p.img or active_naa720p.img)
2. flash zip in cwm (cm10_enable720p.zip)
https://www.mediafire.com/folder/f28fff1i6i5v1/
Make sure nothing is runnning (like mediascanner) when recording!
Check video fps with ffmpeg in terminal emulator:
Type
Code:
ffmpeg -i videoname.mp4
If fps is only around 25-27 try this in terminal:
Code:
su
renicesflinger.sh 0
Pls report back if it's working for you, I was a bit tired when writing this...
---------------------------------------------------------------------------------------------------
About the kernel: it's based on
https://github.com/nobodyAtall/msm7x30-2.6.32.x-nAa
I changed one file:
arch/arm/mach-msm/board-semc_mogami.c
The changed file can also be found at https://www.mediafire.com/folder/f28fff1i6i5v1/
Current values are these:
Code:
#define MSM_FB_SIZE 0x200000
#define MSM_PMEM_SF_SIZE 0x800000
#define MSM_PMEM_CAMERA_SIZE 0xBE0000
#define MSM_PMEM_ADSP_SIZE 0x1F80000
I think 1 mb more ram can be regained...
Impressive work !
Can you document changes in your kernel ?
or can you just make a patch file so it can be used on every CM 10 kernel ?
Will it work on CM 10.1 based roms, say JV?
Impressive
As You Used Mini Lib Files Is It Somehow Possible To Replace These Files And Use In Other Xperia 2011 Lineup?
RaptorX88 said:
Will it work on CM 10.1 based roms, say JV?
Click to expand...
Click to collapse
I think it WILL work, just need to replace ramdisk of kernel.
Anyway, that's great! It definitely worth testing on CM11.
Vynikal said:
I think it WILL work, just need to replace ramdisk of kernel.
Anyway, that's great! It definitely worth testing on CM11.
Click to expand...
Click to collapse
Wish it were that simple ...Booting with 2.6.x kernel can cause unexpected errors ...CM11 is optimized for kernel 3.4.x...
Finally ! Can't wait to be ported to CM11 on Xperia Mini Pro !
karandpr said:
Impressive work !
Can you document changes in your kernel ?
or can you just make a patch file so it can be used on every CM 10 kernel ?
Click to expand...
Click to collapse
Sure I will,only 3-4 lines changed in board-semc_mogami.c, I will post it when I am at home.
Works with Mesa kernel too.
karandpr said:
Wish it were that simple ...Booting with 2.6.x kernel can cause unexpected errors ...CM11 is optimized for kernel 3.4.x...
Click to expand...
Click to collapse
I meant, how about raising pmem_adsp in 3.4 kernel like here?
Vynikal said:
I meant, how about raising pmem_adsp in 3.4 kernel like here?
Click to expand...
Click to collapse
No....the camera libs are only compatible with 2.6.x kernel ....There are no libs compatible with 3.4.x kernel and rewriting them will take years ...
karandpr said:
No....the camera libs are only compatible with 2.6.x kernel ....There are no libs compatible with 3.4.x kernel and rewriting them will take years ...
Click to expand...
Click to collapse
Oh, shame. Nevermind, thanks for clarification.
Can you post some recording samples?On stock .587 FW audio & video recording is very good so it would be great to compare the quality
RaptorX88 said:
Will it work on CM 10.1 based roms, say JV?
Click to expand...
Click to collapse
The kernel contains a ramdisk for jb4.2 so it's not impossible. You could perhaps try...
Added source change to opening post.
danutzgtx480 said:
Can you post some recording samples?On stock .587 FW audio & video recording is very good so it would be great to compare the quality
Click to expand...
Click to collapse
MX player says it's 6mb/s, I did a quick capture (20-30 secs) it looks great on the phone. I can't say how well it looks on pc because I'm having some trouble with my sd-card (it wont show all the folders, only 4-5, when I connect it to a pc - this is not related to this great mod by miniuser123)
Test with CM 10.1
miniuser123 said:
The kernel contains a ramdisk for jb4.2 so it's not impossible. You could perhaps try...
Added source change to opening post.
Click to expand...
Click to collapse
Nope..It doesnt boot,after the bootanim,a blackscreen comes and stays like that.Tested with JV 6.0(Maybe its because it was based on CM10.1 LX 20131108 NIGHTLY for anzu and coconut ? )
karandpr said:
No....the camera libs are only compatible with 2.6.x kernel ....There are no libs compatible with 3.4.x kernel and rewriting them will take years ...
Click to expand...
Click to collapse
Just managed to get stock camera lib to work with kernel 3.4. It was really easy too. FPS is almost as good as in kernel 2.6.
I tried it in CM10, I hope it will work in kitkat... Will install cm11 tomoz.
My theory: cm and stock camera lib only differs in that stock uses pmem_camera, while cm one uses pmem_adsp. For some reason pmem_camera is faster, probably because it is cached pmem (not sure what that means in case of pmem)...
miniuser123 said:
Just managed to get stock camera lib to work with kernel 3.4. It was really easy too. FPS is almost as good as in kernel 2.6.
I tried it in CM10, I hope it will work in kitkat... Will install cm11 tomoz.
My theory: cm and stock camera lib only differs in that stock uses pmem_camera, while cm one uses pmem_adsp. For some reason pmem_camera is faster, probably because it is cached pmem (not sure what that means in case of pmem)...
Click to expand...
Click to collapse
did you just say you got stock ICS cam libs working with 3.4 kernel? then there's hope for us/our devices, lots of hope!!!
miniuser123 said:
Just managed to get stock camera lib to work with kernel 3.4. It was really easy too. FPS is almost as good as in kernel 2.6.
I tried it in CM10, I hope it will work in kitkat... Will install cm11 tomoz.
My theory: cm and stock camera lib only differs in that stock uses pmem_camera, while cm one uses pmem_adsp. For some reason pmem_camera is faster, probably because it is cached pmem (not sure what that means in case of pmem)...
Click to expand...
Click to collapse
LINK PLEASE!! we'll test it.
miniuser123 said:
Just managed to get stock camera lib to work with kernel 3.4. It was really easy too. FPS is almost as good as in kernel 2.6.
I tried it in CM10, I hope it will work in kitkat... Will install cm11 tomoz.
My theory: cm and stock camera lib only differs in that stock uses pmem_camera, while cm one uses pmem_adsp. For some reason pmem_camera is faster, probably because it is cached pmem (not sure what that means in case of pmem)...
Click to expand...
Click to collapse
Is it even possible!? Great work, please test it asap. :victory:
Thank you very much,works great on super jelllybean 8.0. Finaly 720p! :victory:
Related
v2 Released. Scroll down for info!
Hello,
After lots of help from sirkay and FXP, I've built my own kernel that I thought I'd share with you.
This kernel wouldn't exist without the hard work of FXP. This is built from his source code. All real credit for this belongs with him (and DoomLord too, also an FXP Team member)
That said, this is my take and keeps the rather awesome release that is CM7.2 alive!
To be clear: This is a kernel for Cyanogen Mod 7.2 - Gingerbread! If you want a good ICS Kernel look at Sirkay's Thread.
So, what's different?
Uses a very recent GCC to compile, GCC version 4.6.3 which I optimised the build for Cortex-a8 and NEON.
Is compiled for performance not size (Optimize for size unticked)
Heap Randomisation is disabled.
Enabled SWAP - So you can use swap if you want to...
Default Scheduler changed to deadline, same as the Sony official kernel (still has bfq if you want to use it)
Default governor changed to ondemand.
CONFIG_OABI_COMPAT turned off. (This might break apps, haven't found any yet though)
Disabled CPUFreq Debugging.
Disabled FRAME_POINTERS, enabled STACK_UNWIND. Reason here: http://lists.openmoko.org/nabble.html#nabble-td6126708
There is no boot logo when this kernel boots. Each time I added one, the kernel refused to boot. I'll look at that. Just have patience, your phone is booting still...
(Here's where I make lots of stupid claims about how smooth, how buttery, how much battery life this kernel saves. Except I'm not a screaming idiot, so I'm not going to do that!)
I'm interested in any feedback you have, but I did this mostly for me.
And please remember the real person to thank, FXP. It's his source code I've used to build this. Also again thanks to Sirkay for his help and pointers.
Download it from here.
- muppet
Nice Kernel what's battery performance ??
aditya080908 said:
Nice Kernel what's battery performance ??
Click to expand...
Click to collapse
About the same as every other kernel.
OTG support? ?!
Sent from my ST18i
so good, This is what I looking for
@muppetmania attach here you png file. i can try to convert it to .rle for you
Could GB MIUI have the privilege?
Could we have a CM7 based MIUI 2.3.7 kernel?
I think GB MIUI works just fine and don't want to upgrade to ICS or JB.
But a better kernel for GB MIUI is always appreciated.
Thanks in advance,pls let us know if you'd be willing to.
Anoopnk said:
OTG support? ?!
Click to expand...
Click to collapse
If you'd like me to respond to questions, please post an actual articulate question in the first place. Cheers.
Yes, I'm aware I'm a ****, it's been pointed out to me already
sirkay said:
@muppetmania attach here you png file. i can try to convert it to .rle for you
Click to expand...
Click to collapse
Thanks sirkay, but the problem isn't that I can't make a rle file, it's that the rle file when added to the ramdisk stops the kernel booting. It seems to a bug in the SEMC loader, I found a post about it somewhere. Does the boot.img need to be padded out to a certain size to work?
Sometimes my logo.rle would work, but then I'd make changes, recompile, and the kernel would hang on boot. Annoying, so I've removed it for the moment.
rivtre said:
Could we have a CM7 based MIUI 2.3.7 kernel?
I think GB MIUI works just fine and don't want to upgrade to ICS or JB.
But a better kernel for GB MIUI is always appreciated.
Thanks in advance,pls let us know if you'd be willing to.
Click to expand...
Click to collapse
Hi rivtre,
I'd love to help, but my Ray is the only phone I have and is running CM7.2. While I could make a kernel for MIUI I'd have no (easy) way to test it. It wouldn't be fair to anyone if I started releasing untested things. So I'm sorry, it's not that I don't want to help, but no. Anyway, read the next bit to see why that's probably not a bad thing!
To All:
My kernel seems to be terrible when it comes to HD video recording. Can anyone else test this? I get heaps of dropped frames using my kernel when recording HD video vs a FXP Stock kernel. I need to look more at this, but for the moment I'd recommend not using this kernel!
v2 Released!
Version 2 of muppet kernel released.
What's new?
Compiled with GCC 4.7.1
Reverted to BFQ Scheduler by default
Reverted to Interactive CPU Scaling by default
Added logo.rle so you know it's booting!
Removed Debugging Symbols (CONFIG_KALLSYMS)
Reverted the scheduler and CPU scaling as they seemed to be the cause of the video recording lag.
Enjoy!
Download
does the kernel also work with this rom http://forum.xda-developers.com/showthread.php?t=1424121?
can I flqsh the kernel with flashtool?
is overclocking possible?
borg17a said:
does the kernel also work with this rom http://forum.xda-developers.com/showthread.php?t=1424121?
can I flqsh the kernel with flashtool?
is overclocking possible?
Click to expand...
Click to collapse
Not sure if it works with the stock ROM or not - try it and report back.
Yes, like all kernel images, you can flash it with Flashtool.
You can OC up to 1.6Ghz.
I tried it, but It doesn't work. Booting failed
muppetmania said:
Not sure if it works with the stock ROM or not - try it and report back.
Yes, like all kernel images, you can flash it with Flashtool.
You can OC up to 1.6Ghz.
Click to expand...
Click to collapse
borg17a said:
I tried it, but It doesn't work. Booting failed
Click to expand...
Click to collapse
Oh well sorry. It's only for CM7.2
muppetmania said:
Version 2 of muppet kernel released.
What's new?
Compiled with GCC 4.7.1
Reverted to BFQ Scheduler by default
Reverted to Interactive CPU Scaling by default
Added logo.rle so you know it's booting!
Removed Debugging Symbols (CONFIG_KALLSYMS)
Reverted the scheduler and CPU scaling as they seemed to be the cause of the video recording lag.
Enjoy!
Download
Click to expand...
Click to collapse
Just flashed your kernel, going to give a test run! thanks!!
Edit:
Well it doesn't seem to me that the camera recording works at all ... pictures = fine - but when trying to record video - the image freezes - and the camera app crashes.
I have to reboot to get back into the camera app...
Also, can't play any video I previously recorded...
Anything I'm missing?
I've flashed your kernel and did a cache + dalvik wipe...
Cheers!
Apocalyps2 said:
Just flashed your kernel, going to give a test run! thanks!!
Edit:
Well it doesn't seem to me that the camera recording works at all ... pictures = fine - but when trying to record video - the image freezes - and the camera app crashes.
I have to reboot to get back into the camera app...
Also, can't play any video I previously recorded...
Anything I'm missing?
I've flashed your kernel and did a cache + dalvik wipe...
Cheers!
Click to expand...
Click to collapse
Oh, well that's not the sort of feedback I wanted!
I haven't done much video recording the last couple of weeks (I've been away from work)
Let me do some testing and see what I can find...
Thanks for reporting
If you want a logcat I'll make one and get it to you , cheers
Sent from my ST18i using xda app-developers app
GPS
i just install your kernel on my phone...but why my GPS cannot running well
a1nx said:
i just install your kernel on my phone...but why my GPS cannot running well
Click to expand...
Click to collapse
why your bug reporting so terrible
a1nx said:
i just install your kernel on my phone...but why my GPS cannot running well
Click to expand...
Click to collapse
Update baseband to 75 or 77 ...reflash kernel !!!
Have fun !!
Sent from my ST18i
Does any JB Rom+Kernel support 720recording?
g.man.7489 said:
Does any JB Rom+Kernel support 720recording?
Click to expand...
Click to collapse
if they specified in their feature list....
for me rizal lovins cybershot has worth more than my mobile camera
mamujaan said:
if they specified in their feature list....
for me rizal lovins cybershot has worth more than my mobile camera
Click to expand...
Click to collapse
Don't expect more 720p recording is more than enough.. I think they will implement 720p after 3.0.8 kernel development completes..
deccen90 said:
Don't expect more 720p recording is more than enough.. I think they will implement 720p after 3.0.8 kernel development completes..
Click to expand...
Click to collapse
thx, can you tell me more about 3.0.8 kernel? or anything say about that?
g.man.7489 said:
thx, can you tell me more about 3.0.8 kernel? or anything say about that?
Click to expand...
Click to collapse
kernel will be little bit faster compare to current kernel ...... almost 500 points more in antutu benchmark, few features like vsync, project butter can be implemented fully & there are few more i don't know clearly about 720p still don't think they will implement on 3.0.8 kernel either because of missing jb camera libs from sony ....
I think we will not have HD video recording ,becouse without it we have 380MB RAM (XJ with kernel 3.0.8 and without HD recording have 380MB RAM).
Spellbound_91 said:
I think we will not have HD video recording ,becouse without it we have 380MB RAM (XJ with kernel 3.0.8 and without HD recording have 380MB RAM).
Click to expand...
Click to collapse
xperia j just VGA recording not HD recording ....
g.man.7489 said:
Does any JB Rom+Kernel support 720recording?
Click to expand...
Click to collapse
in the latest FXP releases 720P in not supported because it reduces free ram!!!
it seems to say goodbye 720
wait for 3.0.8 kernel to get fully developed
may be nAa can do some magic
avinashrocks1990 said:
wait for 3.0.8 kernel to get fully developed
may be nAa can do some magic
Click to expand...
Click to collapse
We got 3.4 also I won't expect 720p recoding without official jb libs... If they implement we get less fps compared to official 720p
Search for besttt fixes in arc cm10 thread. Flash latest lupus kernel or kernel inside fxp220 zip and flash cm10 boot to system. Then flash besttt fixes. Boom! 720p enabled. Enjoy
P.S. Is it so difficult to post in right thread? http://forum.xda-developers.com/showthread.php?t=2276094 its a right one to post all sorts of neo/v/l related questions. Please dont make threads for such things. Either search or post in right thread. Thanks
sent via tapatalk
deccen90 said:
We got 3.4 also I won't expect 720p recoding without official jb libs... If they implement we get less fps compared to official 720p
Click to expand...
Click to collapse
after 3.0.8 and 3.4.45 kernel
i can say anything is popular
don't forget we have got really great and hardworking devs for xperia 2011 line of phones
XNovaThor Project
About:
This rom bases on the most current Android (4.1.2) Open Source Project repo That is what makes it special comparing to other custom JB roms like AOKP or CyanogenMod. This rom is fully AOSP, without stuff from AOKP or CM. Don’t even ask if i could add theme engine, custom lockscreen or other crap. Using clean rom we can reach 700mb??? of free ram without any task killer on board.
Working
RIL
Mobile Data
WiFi
USB tether
GPS
Leds
Audio
SD Card (internal storage)
App2SD
MTP & USB Mass Storage
Sensors
Vibrator
Project Butter
Bluetooth
Camera with camcorder
Torch
Youtube HQ
CPU sleep mode
OMX -> Hardware Decoders / Encoders
Gapps included
Location services
Known Issues
native WiFi Tethering
Fm Radio
Changelog
V2
- initial release
DownloadV2 http://goo.im/devs/percy215/AOSP_NYPON/AOSP_4.1.2.zip
Instruction
wipe data, cache, dalvik-cache
flash rom via recovery
reboot and voila!
TIPS for performance!!
disable auto brightness
disable dial pad touch sounds
and then reboot
CreditsFXP
smileydr0id
Screenshots
I'll give this a try and report back after some testing.
Great. I will test tonight.
camera not working
http://pastebin.com/zZqWENgr
Will post fix asap i get time
percy_g2 said:
camera not working
http://pastebin.com/zZqWENgr
Will post fix asap i get time
Click to expand...
Click to collapse
yep my vendor is prepared only for XU XGo and XSOLA
DevSwift1 said:
yep my vendor is prepared only for XU XGo and XSOLA
Click to expand...
Click to collapse
will push the libs for nypon too
usb debugging is not working with mororobo
m_k1815 said:
usb debugging is not working with mororobo
Click to expand...
Click to collapse
usb debugging is working fine , i posted logcat too
@DevSwift1 uploading new build with new blobs and will commit too github too asap btw all things are fixed
By all things you mean HD video too? The hardware decoder? Cause on normal CM even though YouTube HQ is working apps like TwitchTV give only sound without video.
Irseq said:
By all things you mean HD video too? The hardware decoder? Cause on normal CM even though YouTube HQ is working apps like TwitchTV give only sound without video.
Click to expand...
Click to collapse
all things except native wifi [ not a big deal ]
percy_g2 said:
all things except native wifi [ not a big deal ]
Click to expand...
Click to collapse
*Honest brofist* (I'm too young to buy You a beer)
Issues
There is no notification sounds and ringtones;
APN not configured automatically
Max CPU frequency no reaches 1GHz, but only 900MHz with any governor
Camera does not work with FC when clicked (Galeria works fine).
NFC does not work.
Anyway this rom is really smooth and fast.
hlcxcx said:
Issues
There is no notification sounds and ringtones;
APN not configured automatically
Max CPU frequency no reaches 1GHz, but only 900MHz with any governor
Camera does not work with FC when clicked (Galeria works fine).
NFC does not work.
Anyway this rom is really smooth and fast.
Click to expand...
Click to collapse
you can add sounds on your own from cm or any other roms
APN you can configure
i have deleted kernel from zip which i'am uploading
camera fixed
NFC i don't use
percy_g2 said:
you can add sounds on your own from cm or any other roms
APN you can configure
i have deleted kernel from zip which i'am uploading
camera fixed
NFC i don't use
Click to expand...
Click to collapse
Ok. I'll wait for the next release.
If you deleted the kernel we should use your GNU kernel then? Or a stock-based kernel?
LINK:- http://goo.im/devs/percy215/AOSP_NYPON/AOSP_4.1.2.zip
MD5SUM:- 9125cba54817b7f2dd75768be4e0088c
Change logs:-
New blobs added
Camera and other issues related to it fixed
Use CM10 kernel from FXP or my GNU kernel to Boot it up
@DevSwift1 add this in First post
percy_g2 said:
LINK:- http://goo.im/devs/percy215/AOSP_NYPON/AOSP_4.1.2.zip
MD5SUM:- 9125cba54817b7f2dd75768be4e0088c
Change logs:-
New blobs added
Camera and other issues related to it fixed
Use CM10 kernel from FXP or my GNU kernel to Boot it up
@DevSwift1 add this in First post
Click to expand...
Click to collapse
Using GNU kernel by percy CPU frequency is correct.
EDIT: This rom does not have Torch.
Just flashed it with GNU kernel and the first impression is very good. Minion Rush is playing flawlessly, no lags at all (was having some problems with Enigma/Fidelity + Nemesis)
=) Thanks
Screen Rotation
Hi, i have problem with rotation, only works in games and camera, and sometimes in messages! I have on in accessibility and nothing, reboot many times and the same. HDMI and NFC not work, but the rest is amazing, works very well, excelent work (Y)
------- Please have a backup kernel in case this does not boot. I am not responsible for bricks. This kernel is provided to help development of Galaxy player 5.0 and give others the added features in thier 4.2 roms. This kernel is for Slim Bean 4.2 ONLY. Do not use this with CM10.1 or PAC 4.2, it will freeze on boot screen.
-------- Slim Bean 4.2--- http://forum.xda-developers.com/showthread.php?t=2298872
-------- Slim Gapps 4.2 ----- http://slimroms.net/index.php/downl...load/916-addons/5416-slim-gapps-4-2-2-build-8
-------- Google apps (Gapps) 4.2 -------- https://www.dropbox.com/sh/kifcelekch235kz/D3ZdB7_YHV/GApps Core 4.2.2.zip
--- It is Recommended you install Slim apps for added system apps, you should also install Gapps for google play store and google apps----
1. install Slim Bean
2. install Slim Gapps
3. install Gapps
4. install kernel
5. reboot.
------ FEATURES----
Working FM Radio
Working front and Rear camera ( Fast burst app needed) -------- Flash for pictures not currently supported (WIP)
Working Back and Front Camera Recording with stock app ( flash camera fix zip below) ( Must use seperate video player for playback)
Working Flashlight LED tool.
-------------- UPDATED Sultan r6b2 kernel for 4.2----RECOMMENDED--------------
New Updated Kernel for 4.2 ------- http://www.freeuploadsite.com/do.php?id=22418
-------- APPS -------
Tiny Flashlight ------ https://play.google.com/store/apps/details?id=com.devuni.flashlight
Fastburst ------ https://play.google.com/store/apps/details?id=com.spritefish.fastburstcameralite
SprintFM ------- http://apkgalaxy.com/tag/spirit-fm-radio-unlocked-apk ---- V sept. 24 confirmed working
-------- You must select GalaxySL/i9003 for radio to work. to find this enter settings, go to audio then method to change it.
Camera recording Fix ---------- http://forum.xda-developers.com/attachment.php?attachmentid=1988153&d=1369421491
( Once you install the camera fix through CWM, you will have two camera apps. It is recommended you disable the old version. You can do this by going into app settings and disable the galley app that has a smaller file size then the other galley app. ) ( You can not play videos through galley app, you have to play them with a seprate player or you will get an error)
-------BUGS--------
----- SprintFM UI can freeze, you still can change stations, and you still can enter the stations frequency to tune in. The status just freezes but all the buttons still work.
----- SprintFM If you use pause and play button it may create more static then there should be. Recommend using on/off button instead.
----- Gallery will not play videos you record, must use seprate video player.
----- Stock camera app still will not take rear cam pictures, no flash for pictures either. ( this is common with ICS 4.2 and JB 4.3 roms ) Fix is a WIP.
--------- OLD VERSION Sultan Kernel R5V2 ---4.2------
Kernel ------- http://www.freeuploadsite.com/do.php?id=22379
---- Fixed issue with FM Radio having alot of static, new kernel provides clearer reception. Sultan r6b2 kernel above has better radio reception.
-----------COMING SOON---------
---- CM10.1 based kernel
----PAC 4.2 based kernel
------- NEEDS FIXING-----
---- Stock Camera app does not take rear pictures, no flash for pictures either, if this gets fixed then JB 4.2 will be complete. Everything else works great.
Special Thanks to android1234567 for all the hard work helping me compile this.
mrshane88 said:
This kernel was made to incoporate the Fm driver into 4.2 roms. What we did was recompile Jackpot 3.0 master Kernel with Slim Bean sources. This was tested on Slim Bean 4.2 and confirmed to work.
Working FM Radio
Working front and Rear camera ( Fast burst app needed)
Working Flashlight LED tool.
Kernel ------- http://www.freeuploadsite.com/do.php?id=22379
Special Thanks to android1234567 for all the hard work.
Click to expand...
Click to collapse
what flash light app are you using? flashlight+ doesn't seem to get the back led light to work
Is there any actual difference between this and android1234567's version?
Sent from my zx spectrum
joemhewitt said:
Is there any actual difference between this and android1234567's version?
Sent from my zx spectrum
Click to expand...
Click to collapse
The only difference between this one and Sultan r5 is the incorporated radio driver.
Sultan r6 kernels are for 4.3 roms only ----- they have the radio driver but no camera, LED flashlight features.
Sultan r5 kernels are for 4.2 roms ------ they have partial working camara, LED flashlight features, but no radio driver.
What I wanted to do was add the radio driver so theres one more added feature to r5.
Lorddemonrage Try Tiny flashlight app, I found it works very good.
mrshane88 said:
The only difference between this one and Sultan r5 is the incorporated radio driver.
Sultan r6 kernels are for 4.3 roms only ----- they have the radio driver but no camera, LED flashlight features.
Sultan r5 kernels are for 4.2 roms ------ they have partial working camara, LED flashlight features, but no radio driver.
What I wanted to do was add the radio driver so theres one more added feature to r5.
Lorddemonrage Try Tiny flashlight app, I found it works very good.
Click to expand...
Click to collapse
But the camera does work on 4.3????????
Sent from my zx spectrum
joemhewitt said:
But the camera does work on 4.3????????
Sent from my zx spectrum
Click to expand...
Click to collapse
The camera does not work on 4.3 using sultans kernel r6. But radio does. That is why I wanted to make a kernel for 4.2 with the radio drivers. So now theres radio and camera on 4.2. If you used Sultans kernel r6 on 4.3 based rom the camera instantly closes when you open it, I had tested PAC and CM10.2 roms which are 4.3 and the camera never worked. This is a fine solution for anyone who dosen't mind running 4.2 untill the bugs in 4.3 are fixed. This way you can still run Sultans Kernel, have FM and camera working plus the flashlight tool. However, the camera only works with fast burst app, and there is no flash for pictures. Your welcome to test other camera apps with 4.2 to see if flash will work with them, I just haven't found one yet.
mrshane88 said:
The only difference between this one and Sultan r5 is the incorporated radio driver.
Sultan r6 kernels are for 4.3 roms only ----- they have the radio driver but no camera, LED flashlight features.
Sultan r5 kernels are for 4.2 roms ------ they have partial working camara, LED flashlight features, but no radio driver.
What I wanted to do was add the radio driver so theres one more added feature to r5.
Lorddemonrage Try Tiny flashlight app, I found it works very good.
Click to expand...
Click to collapse
tried it out with tiny flashlight, works great! blinded myself and thats why it took me that long to respond.
Lorddemonrage said:
tried it out with tiny flashlight, works great! blinded myself and thats why it took me that long to respond.
Click to expand...
Click to collapse
That's good to hear it worked lol, I have tried other flashlight apps in the past and most don't work. I like Tiny flashlight the best. If you have anymore questions feel free to ask.
mrshane88 said:
That's good to hear it worked lol, I have tried other flashlight apps in the past and most don't work. I like Tiny flashlight the best. If you have anymore questions feel free to ask.
Click to expand...
Click to collapse
that really sultan r6 working on 4.2.2?? if so that is awesome..... some of the updates in sultan r6 i wanted to get in 4.2.2, can't go into 4.3 atm cause of all the bugs and the fact that viper4android isn't installing drivers under 4.3, but works great on 4.2.
little step closer to curing my upgrade-itis
Camera works for some people with fast burst camera on 4.3. I wonder why not for all...
Sent from my zx spectrum
Lorddemonrage said:
that really sultan r6 working on 4.2.2?? if so that is awesome..... some of the updates in sultan r6 i wanted to get in 4.2.2, can't go into 4.3 atm cause of all the bugs and the fact that viper4android isn't installing drivers under 4.3, but works great on 4.2.
little step closer to curing my upgrade-itis
Click to expand...
Click to collapse
The bootimage and kernel modules were replaced in R6 so it would work on 4.2. I assume you would have all the features of R6 on 4.2
This kernel was compiled using Slimbean 4.2 sources. I need some feedback if this works on other 4.2 roms so let me know what rom your using and how it performs.
@joemhewitt, I did test the camera on CM10.2 with CM10.2 kernel and did get the camera working. But the flashlight feature did not work, and the radio did not work either. So I tried both Sultan r6b2 and r6 for 4.3 which gave me radio but no camera or flashlight. Thats what I found when I tested it.
OK, there really isn't much difference between 4.2 and 4.3 anyway. I may flash this depends if fast burst camera is any good.
EDIT : Can you make an international version? Thanks.
Sent from my zx spectrum
joemhewitt said:
OK, there really isn't much difference between 4.2 and 4.3 anyway. I may flash this depends if fast burst camera is any good.
EDIT : Can you make an international version? Thanks.
Sent from my zx spectrum
Click to expand...
Click to collapse
This kernel was compiled for the USA version. I can build it for International version. But I've had problems with Kubuntu so I had to move to Linux Mint. So now I have to re-downloaded and prepare everything again. I would say give it about a week and I will upload Inter. version
Fastburst camera will take a fair picture, quality could be better. No one has fixed the stock camera app for ICS or JB yet. The front camera will work but the rear will not save pictures and freeze with stock app. And you can not record video from the rear camera either. I'm trying to get some help on fixing this, its a work in progress.
mrshane88 said:
The bootimage and kernel modules were replaced in R6 so it would work on 4.2. I assume you would have all the features of R6 on 4.2
This kernel was compiled using Slimbean 4.2 sources. I need some feedback if this works on other 4.2 roms so let me know what rom your using and how it performs.
@joemhewitt, I did test the camera on CM10.2 with CM10.2 kernel and did get the camera working. But the flashlight feature did not work, and the radio did not work either. So I tried both Sultan r6b2 and r6 for 4.3 which gave me radio but no camera or flashlight. Thats what I found when I tested it.
Click to expand...
Click to collapse
Currently running on Slimbean myself
I can give this a shot, is dirty flashing ok or would a full wipe and install of pac/chaos/cm/Remics JB Fire Eel better?
Lorddemonrage said:
Currently running on Slimbean myself
I can give this a shot, is dirty flashing ok or would a full wipe and install of pac/chaos/cm/Remics JB Fire Eel better?
Click to expand...
Click to collapse
If you want to keep all your apps and data I'd just flash the kernel. But if you wanted to put a new rom on it then I'd go for a full wipe. If you do a full wipe its good to wipe the delvik cache too, its under advanced in CWM.
mrshane88 said:
If you want to keep all your apps and data I'd just flash the kernel. But if you wanted to put a new rom on it then I'd go for a full wipe. If you do a full wipe its good to wipe the delvik cache too, its under advanced in CWM.
Click to expand...
Click to collapse
K, will give it a go, got CM 7/23/2013 and pac 06/10/2013 will let you know in a few hours how it goes.
I like the CWMR touch btw, but touch screen does not work. still looks nice though
edit: i accidentally swiped my finger while in recovery mode and can get the indicator to scroll, but not select things. still neat though
Update:
With all attempts i did a factory reset, wiped system and dalvic
With Pac-Rom 06/10/2013 build (which i think is the latest for 4.2.2)
installed gapps and modified r6 working on 4.2.2, would sit on boot screen, tried another wipe and restore, same thing. tried to wipe and restore with regular sultan 5 kernel would boot to homescreen. tried to install r6 after successfull boot, would hang at boot screen again.
For CM 10.1 same as the above.
tried it again with slim, had no problems installing.
Lorddemonrage said:
Update:
With all attempts i did a factory reset, wiped system and dalvic
With Pac-Rom 06/10/2013 build (which i think is the latest for 4.2.2)
installed gapps and modified r6 working on 4.2.2, would sit on boot screen, tried another wipe and restore, same thing. tried to wipe and restore with regular sultan 5 kernel would boot to homescreen. tried to install r6 after successfull boot, would hang at boot screen again.
For CM 10.1 same as the above.
tried it again with slim, had no problems installing.
Click to expand...
Click to collapse
Sounds like this Kernel may only work on slimbean 4.2 . For PAC and CM it looks like I'll have to build another kernel with PAC and CM sources. I'll do more building and testing soon.
I'm sorry for the delay and will continue to work on this project but I have many other things I'm working on, Modding pc games, developing Linux Mint, programming and the list goes on but I'll compile another kernel for CM and PAC soon
Collection of kernels compiled from source, but with different partition layout.
For users who are in need for it (or just for the lulz)
Lupus GB V12
System/Data
219MB/700MB
Download:
480p - http://www.mediafire.com/download/fsejp07fkup21u2/LupusGBv12RAM_system219MB_data700MB.img
720p - http://www.mediafire.com/download/8lucaxtnezg0pb3/LupusGBv12FULL_system219MB_data700MB.img
Lupus ICS/GB V7
System/Data
400MB/519MB
Download:
480p - http://www.mediafire.com/download/y..._Stock-gB+iCsv7-RAM-system400MB_data519MB.img
720p - http://www.mediafire.com/download/c...Stock-gB+iCsv7-FULL-system400MB_data519MB.img
Lupus ICSbeta V12
System/Data
400MB/519MB
Download:
480p - http://www.mediafire.com/download/23gzbk23ddk854p/LuPuS-v12-iCs-RAM-system400MB_data519MB.img
720p - http://www.mediafire.com/download/3qpmr9aurek4g4z/LuPuS-v12-iCs-FULL-system400MB_data519MB.img
System/Data
310MB/609MB
Download:
480p - http://www.mediafire.com/download/ydmljrsbf48ysma/LupusICSbetaV12_RAM_system310MBdata609MB.img
720p - http://www.mediafire.com/download/4sm2wxm0z4a2cm3/LupusICSbetaV12_FULL_system310MBdata609MB.img
Doomlord GB v14
219/700
480p - http://www.mediafire.com/download/3qu4cls3nu3s5vv/DoomLord_gcc462_GB_v14_RAM_system219_data700MB.img
720p - http://www.mediafire.com/download/0gsg3e0duikv0hc/DoomLord_gcc462_GB_v14_FULL_system219_data700MB.img
Doomlord ICSbeta v03
310/609
480p - http://www.mediafire.com/download/c48c4wcaqfeikcp/DoomLord_gcc462_ICS_v3_RAM_system310_data609MB.img
720p - http://www.mediafire.com/download/59zo9pb8ifrki17/DoomLord_gcc462_ICS_v3_FULL_system310_data609MB.img
400/519
480p - http://www.mediafire.com/download/a84bmv5n8ibbahv/DoomLord_gcc462_ICS_v3_RAM_system400_data519MB.img
720p - http://www.mediafire.com/download/xjs76aeo36eztzn/DoomLord_gcc462_ICS_v3_FULL_system400_data519MB.img
TIPS:
-If you are using doomkernel, you must flash wifi modules (check attachments)
-If you are having problem when downloading apps from playstore, download and run marketfix
-If you are having trouble with root in your rom with one of these kernels, install latest busybox, then update su binaries from within superuser app
WARNING:
Flashing kernel with different partition layout will make your current rom unbootable!!!
You must do factory reser (erase system and data) after flashing new kernel!!!!! MAKE BACKUP! Recommended way is to backup apps with "Titanium backup" or "Mybackuproot". You have been warned!
NOTE:
For easier wiping system and data, i've made batch file for windows users(it should help too if you are stuck in kernel logo and/or in recovery menu):
Download eraser.zip unpack anywhere in PC, and double-click on file "start.bat" when phone is fastboot mode to erase system and data partitions (best time to do it is right after flashing new kernel, but don't forget to select "factory reset" from recovery because ".android secure" folder from sd card must be erased too)
Links to source/thread of kernes:
Lupus GB v12
source: https://github.com/garwedgess/LuPuS-GingerBread -b master
thread: [KERNEL][PLAY] LuPuSv12-GB [STOCK-GB][LINARO 4.7.3][UPDATED 07-09-13]
Lupus ICSbeta V12
source: https://github.com/garwedgess/LuPuS-STOCK-ICS-Xperia2011 -b ics
thread: [KERNEL][PLAY] LuPuS-iCs-BeTa-v12 [LINARO][ICS-BETA BASED][UPDATED 20-12-12]
Lupus ICS/GB V7
source: https://github.com/garwedgess/LuPuS-STOCK-ICS-Xperia2011 -b master
thread: [KERNEL][PLAY] LuPuSv7 [STOCK ICS/GB & CM9][LINARO 4.7.3][19-06-13]
Doomlord GB V14
source: https://github.com/DooMLoRD/Xperia-2011-Kernel-2.6.32.9 -b master
thread: [KERNEL][PLAY][GSM] DooMKernel [Rel:v14][STOPPED]
Doomlord ICSbeta V03
source: https://github.com/DooMLoRD/Xperia-2011-Kernel-2.6.32.9/tree/ics-zeus -b ics-zeus
thread: [KERNEL][PLAY][GSM/CDMA] DooMKernel [Rel:v03][Dt:15/MAY][FW:ICSBeta]
Changes in source :
Lupus kernel:
gar_zeus_defconfig
Doomlord kernel:
doom_play_defconfig
size of partitions and respective changes in code:
Code:
219MB/700MB
CONFIG_CMDLINE="console=ttyMSM2,115200n8 androidboot.hardware=semc mtdparts=msm_nand:[email protected](system),[email protected](userdata),[email protected](cache),[email protected](boot)"
310MB/609MB
CONFIG_CMDLINE="console=ttyMSM2,115200n8 androidboot.hardware=semc mtdparts=msm_nand:[email protected](system),[email protected](userdata),[email protected](cache),[email protected](boot)"
400MB/519MB
CONFIG_CMDLINE="console=ttyMSM2,115200n8 androidboot.hardware=semc mtdparts=msm_nand:[email protected](system),[email protected](userdata),[email protected](cache),[email protected](boot)"
Credits:
-Wedgess
-Doomlord
-CosmicDan
-XDA Play community (from noobs to real devs)
Thanks for all the work and attention you put on this device. We're thankfull for all the people contributing to stay this amazing device alive.
gangstermartorell said:
Thanks for all the work and attention you put on this device. We're thankfull for all the people contributing to stay this amazing device alive.
Click to expand...
Click to collapse
that s what i m talking about. @Bakisha my friend..amazing work!!! its a step further for xperia play development..how i miss my xperia play..we can do a better job on making new roms,new ports etc..
i hope you dont mind im gonna post this on my blog and FB of play.
ps:can i upload all this on my dev-host and post? so we can track downloads?
Added LupusGB 720p, i forgot to compile that one
@smokerman Sure, no problems, do whatever you want
Ps: I'm just sharing what i learned here, in xda play forum, and i am still a user of this amazing phone, and i will be untill it is dead (in hardware terms )
Ps2: Does anyone know wich branch turbo kernel use? jellybean or master?
Bakisha said:
Added LupusGB 720p, i forgot to compile that one
@smokerman Sure, no problems, do whatever you want
Ps: I'm just sharing what i learned here, in xda play forum, and i am still a user of this amazing phone, and i will be untill it is dead (in hardware terms )
Ps2: Does anyone know wich branch turbo kernel use? jellybean or master?
Click to expand...
Click to collapse
@Bakisha turbo uses jellybean branch.
added.thanks..
Bakisha said:
Added LupusGB 720p, i forgot to compile that one
@smokerman Sure, no problems, do whatever you want
Ps: I'm just sharing what i learned here, in xda play forum, and i am still a user of this amazing phone, and i will be untill it is dead (in hardware terms )
Ps2: Does anyone know wich branch turbo kernel use? jellybean or master?
Click to expand...
Click to collapse
This should help...
https://github.com/cosmicdan/Xperia-2011-Kernel-2.6.32.9-KRsH
I've compiled Turbo Kernel (from 450344ebfc commit but still with cwm because on 175196a5ba commit cwm removed) with 400 gb system partition, some minor bugfix and bring back 720p support (though CosmicDan said it's buggy but I need 720p video recording). I haven't talk to CosmicDan yet to upload this kernel. I'll share the kernel both 720p and 480p after I got permission from CosmicDan.
edit: btw I can't pm @CosmicDan so @CosmicDan can I share your kernel mod? Thanks in advance
itazchu said:
I've compiled Turbo Kernel (from 450344ebfc commit but still with cwm because on 175196a5ba commit cwm removed) with 400 gb system partition, some minor bugfix and bring back 720p support (though CosmicDan said it's buggy but I need 720p video recording). I haven't talk to CosmicDan yet to upload this kernel. I'll share the kernel both 720p and 480p after I got permission from CosmicDan.
edit: btw I can't pm @CosmicDan so @CosmicDan can I share your kernel mod? Thanks in advance
Click to expand...
Click to collapse
I still didn't try to compile turbo kernel, but if you had done it, just post link of kernel and source and i'll add it to OP.
I don't think you need explicit permission from CosmicDan because he will be given all the credits for making one of best kernel for Xperia Play
Sent from my R800i using xda app-developers app
itazchu said:
I've compiled Turbo Kernel (from 450344ebfc commit but still with cwm because on 175196a5ba commit cwm removed) with 400 gb system partition, some minor bugfix and bring back 720p support (though CosmicDan said it's buggy but I need 720p video recording). I haven't talk to CosmicDan yet to upload this kernel. I'll share the kernel both 720p and 480p after I got permission from CosmicDan.
edit: btw I can't pm @CosmicDan so @CosmicDan can I share your kernel mod? Thanks in advance
Click to expand...
Click to collapse
This was postd by COsmicDan in all his threads when he closed the threads. so I think you can post the kernel.. and just Credit to him.. I would love to see someone improving on the Turbo Kernel, while not messing with its original structure.. I mean the originality..
"Thread locked. All development and support for this project is over. Relevant source code, if any, can be found in my GitHub (see my signature). Anyone is free to use this code without permission from me, but be sure to credit other contributors as I always have.
Thank you and good luck to you all! "
itazchu said:
I've compiled Turbo Kernel (from 450344ebfc commit but still with cwm because on 175196a5ba commit cwm removed) with 400 gb system partition, some minor bugfix and bring back 720p support (though CosmicDan said it's buggy but I need 720p video recording). I haven't talk to CosmicDan yet to upload this kernel. I'll share the kernel both 720p and 480p after I got permission from CosmicDan.
edit: btw I can't pm @CosmicDan so @CosmicDan can I share your kernel mod? Thanks in advance
Click to expand...
Click to collapse
720p will not get nothing for our play..believe me..only consumes more ram as we dont have camera libs for it..not even on arcS and its better camera..even if you record on 1280x720p the fps are below( 640x480) 480p..so its a placebo effect..it seems recording but the quality indeed is inferior.
@Bakisha i have tried lupus jb v13 and flashed cm10 and slimbean but non of them booted after i flashed and select reboot my phone just show up black screen
can u please help me???
raminta said:
@Bakisha i have tried lupus jb v13 and flashed cm10 and slimbean but non of them booted after i flashed and select reboot my phone just show up black screen
can u please help me???
Click to expand...
Click to collapse
I admit, i didn't test jb kernel only (but it compiled without problem)
I think i know what is an issue (same reason it wouldn't work on other CM kernels).
For now, don't flash JB kernel (i'll delete from it OP) and i'll try to make it work
Ps: as i understand, you can enter recovery and flash rom? Did it even show kernel logo?
ps2: did you wiped system and data after/before flashing kernel?
sorry if this is the wrong place to ask this question but the Q&A threads seem to only get "views" not replies.
will these work with the R800x with functioning network? id like to have a larger Data partition but it seems all the Kernels ive tried dont allow me to connect to my carrier (VZW).
thanks in advance.
s0me guy said:
sorry if this is the wrong place to ask this question but the Q&A threads seem to only get "views" not replies.
will these work with the R800x with functioning network? id like to have a larger Data partition but it seems all the Kernels ive tried dont allow me to connect to my carrier (VZW).
thanks in advance.
Click to expand...
Click to collapse
I don't have r800x model, but i think it will not work for you. Maybe some r800x user can explain better why it will not work, but as i understand verizion firmware have locked vendor partition
Bakisha said:
I don't have r800x model, but i think it will not work for you. Maybe some r800x user can explain better why it will not work, but as i understand verizion firmware have locked vendor partition
Click to expand...
Click to collapse
ahh. ok. thanks for the quick reply.
Bakisha said:
I admit, i didn't test jb kernel only (but it compiled without problem)
I think i know what is an issue (same reason it wouldn't work on other CM kernels).
For now, don't flash JB kernel (i'll delete from it OP) and i'll try to make it work
Ps: as i understand, you can enter recovery and flash rom? Did it even show kernel logo?
ps2: did you wiped system and data after/before flashing kernel?
Click to expand...
Click to collapse
Kernel logo didn't show
And yes i wiped system and data
Even i flashed kernel again when i saw that phone didn't boot
this time kernel logo showed but it got stuck on boot animation
Sorry for my bad English
Sent from my R800i using xda premium
raminta said:
Kernel logo didn't show
And yes i wiped system and data
Even i flashed kernel again when i saw that phone didn't boot
this time kernel logo showed but it got stuck on boot animation
Sorry for my bad English
Sent from my R800i using xda premium
Click to expand...
Click to collapse
Unfortunatelly, i wasn't able to fix it. I'm also stuck at boot animation.
Oh, well, i guess Lupus Jb v8 is only way to get bigger data partition on JB roms (that or arc s firmware flash)
Sorry guys for not testing this before published. Other versions are all tested and are working properly.
I don't know why Wedgess switch back to stock partition layout on JB v9+, but it must be good reason to do so.
saqibkhan said:
This was postd by COsmicDan in all his threads when he closed the threads. so I think you can post the kernel.. and just Credit to him.. I would love to see someone improving on the Turbo Kernel, while not messing with its original structure.. I mean the originality..
"Thread locked. All development and support for this project is over. Relevant source code, if any, can be found in my GitHub (see my signature). Anyone is free to use this code without permission from me, but be sure to credit other contributors as I always have.
Thank you and good luck to you all! "
Click to expand...
Click to collapse
thanks for the confirmation. I didn't read this notice on Dan's thread. lol
smokerman said:
720p will not get nothing for our play..believe me..only consumes more ram as we dont have camera libs for it..not even on arcS and its better camera..even if you record on 1280x720p the fps are below( 640x480) 480p..so its a placebo effect..it seems recording but the quality indeed is inferior.
Click to expand...
Click to collapse
yap I knew this but I still prefer 720p instead even though the quality might be worse than 480p and I'd like to share with the other member who want it.
Bakisha said:
I don't have r800x model, but i think it will not work for you. Maybe some r800x user can explain better why it will not work, but as i understand verizion firmware have locked vendor partition
Click to expand...
Click to collapse
The vendor partition is already unlocked for cdma. But not sure if those kernels will boot for us R800x users. It's one of those things you would have to just try.
Lordomn said:
The vendor partition is already unlocked for cdma. But not sure if those kernels will boot for us R800x users. It's one of those things you would have to just try.
Click to expand...
Click to collapse
in this rom: http://forum.xda-developers.com/showthread.php?t=2328708 all went fine with r800x users flashing custom kernel lupus GB+ICS so i dont think they are gonna have problems installing this modified ones..only thing has changed as partitions..but maybe anyone can test and confirm this.:good: