Related
Hi sirs
I've tried to flash 3 zip files via xRec , it fails every time :-(
It says that there's something error or don't know what f**k it is
Then it says that the installtion of the zip file is aborted
So what can I do??
I trust that you can find me some solutions
You have BusyBox installed right?
Sent from my LT26i using xda premium
I had same problem, what flashtool version you using may I ask?
Sent from my flying X10 using xda premium
Make sure your not flashing unflashable zip. I made that mistake.
Sent from my flying X10 using xda premium
Surely I have BusyBox
And I'm sure that I haven't flashed unflashable zip , because I tried to flash the Xperia S music player zip downloaded from xda developpers
I had this before when I started out flashing roms, check to see if the zip file is flashed via xrec or cwm5 (if that's how its is or cmw5)
Sent from my Xperia X10 using XDA
The zip files uploaders says " flash with xRecovery " so I do & I fail
Is your super user and su binary up do date. I put mine up to date and it solved the issue of it being able to flash for some roms
TeraXimoS said:
Hi sirs
I've tried to flash 3 zip files via xRec , it fails every time :-(
It says that there's something error or don't know what f**k it is
Then it says that the installtion of the zip file is aborted
So what can I do??
I trust that you can find me some solutions
Click to expand...
Click to collapse
Are you download that file? Make sure your check md5sum
my superuser is up to date , but what is SU binary??
I found it , SU &it's binary is up to date , and the prob still appears :-(
TeraXimoS said:
I found it , SU &it's binary is up to date , and the prob still appears :-(
Click to expand...
Click to collapse
Maybe the zip you're trying to flash is a edify script? Try flash using CWM.
I remembered something , my version of BusyBox is not the latest , can it be a cause ??
I couldn't install the latest BusyBox version , it's really ****ing issue :-(
Please sirs , can you tell me how to flash via PC on Flashtool??
My device is Xperia X10 surely
My rom is the official GingerBread 2.3.3
Look here for flashtool help:
http://forum.xda-developers.com/showthread.php?p=10879507
Sent from my X10S using XDA
Hi, Did you try the search button before asking ?
To use Flashtool, you have an awesome guide by G-FACE (The link is in my signature)
If you are root and just want to install recovery with flashtool just go on post #6 of his thread HERE
Hope it helps...
---------- Post added at 07:56 PM ---------- Previous post was at 07:56 PM ----------
lol, too fast for me laneyofdeath ... ;-)
Mr. 9andar , I have already installed xRecovery , no problem with recovery mode , my problem is FLASHING ZIPs :-(
1: Download Rom of choice to pc/lappy 2:copy it to an easily found place on your sd card 3: boot into x recovery (mash back button upon boot) 4: goto install custom zip, select zip from sd card, and find the zip where u placed it on sd and select install. Thats it (u prob need to do factory reset before installing the zip)
Sent from my X10S using XDA
I'll try to install xRecovery GBReady with FlashTool, If it couldn't fix the prob, I'm gonna do a factory reset unfortunately :-(
Question :does the full backup of xRecovery creates a copy of messages and contacts??
Thank you all
Another question, will I be forced to re-root my device after factory reset??
I have xperia neo v with official ICS update... Then I flashed custom framework from ICS theme thread and phone boots but when I unlock my screen it gives my force closes like client 2.1, news and weather and other stuff...
I tried repairing software via SEUS or PCC but they dont recognize the phone (ther is that sound that computer is recognizing that device is conetcted but PCC cant find it!!!
why not reflash ics ? and if your phone boots , its not called brick
Make a update zip with stock framework and flash
Sent from my MT15i using XDA Premium HD app
Reflash ICS using Flashtool
Download and install flashtool:
[[SEE BELOW FOR LINK]]
Install the drivers for your particular phone from the "flashtool/drivers" folder.
Download the ICS Nordic FTF file from here (you need to re-join them)
1. [[SEE BELOW FOR LINK]]
2. [[SEE BELOW FOR LINK]]
Put the downloaded FTF file in "flashtool/firmwares" folder.
Run FlashTool or FlashTool64 from inside the "flashtool" folder.
Click the Flash button, select flashmode.
Choose the FTF file and follow the instructions.
You'll again get back to the stock ICS ROM for neo V. Enjoy!
ALL LINKS FROM HERE: http://forum.xda-developers.com/showthread.php?t=1599423
aqshyt said:
Download and install flashtool:
[[SEE BELOW FOR LINK]]
Install the drivers for your particular phone from the "flashtool/drivers" folder.
Download the ICS Nordic FTF file from here (you need to re-join them)
1. [[SEE BELOW FOR LINK]]
2. [[SEE BELOW FOR LINK]]
Put the downloaded FTF file in "flashtool/firmwares" folder.
Run FlashTool or FlashTool64 from inside the "flashtool" folder.
Click the Flash button, select flashmode.
Choose the FTF file and follow the instructions.
You'll again get back to the stock ICS ROM for neo V. Enjoy!
ALL LINKS FROM HERE: http://forum.xda-developers.com/showthread.php?t=1599423
Click to expand...
Click to collapse
Why do all that for 1 file
Sent from my MT15i using Tapatalk 2
kormatoes said:
Why do all that for 1 file
Sent from my MT15i using Tapatalk 2
Click to expand...
Click to collapse
You are right. But, that's universal. When you just need to go back to the stock or if have had completely messed up with a ROM.
download a flashtool and re-flash it!
download a flashtool and re-flash it!
ok thanks I reflashed it...
kormatoes said:
Make a update zip with stock framework and flash
Sent from my MT15i using XDA Premium HD app
Click to expand...
Click to collapse
A guy that doesn't even know what brick/force closing is is not going to have it easy creating a flashable zip.
theredsonja said:
A guy that doesn't even know what brick/force closing is is not going to have it easy creating a flashable zip.
Click to expand...
Click to collapse
Always make backups lol
Sent from my MT15i using Tapatalk 2
Make a nandroid back up b4 making any changes to your rom .. i too had terrible times in the beginning . learnt it the hard way
No, I actualy had back-up in my sd card... it simply force closed so fast that I couldn't even replace it... OK now i'm going to be making backup always...
Hi, After flashing NeroICSv2, my touch screen stopped working. 5 day tried different methods to ST15i, does not work.
Please help me!
djRemov said:
Hi, After flashing NeroICSv2, my touch screen stopped working. 5 day tried different methods to ST15i, does not work.
Please help me!
Click to expand...
Click to collapse
is it mini or live with walkman & also NeroICS v2 only support Mini Pro..... sorry buddy!!!! yhu gonna need to use flashtool to flash yur phone.
Sent from my Mini Pro using XDA Premium
I think ur touch is gone now..hope flashtool would recover.but i dont think so by reviews of members
U can check solution here
http://forum.xda-developers.com/showthread.php?t=1713449
Sent from my WT19i using xda premium
Somyab said:
I think ur touch is gone now..hope flashtool would recover.but i dont think so by reviews of members
U can check solution here
http://forum.xda-developers.com/showthread.php?t=1713449
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
This is not working, I ran сalibrate.but, rewriting touch_smiltron_sony on touch_coconut_tpk.Hybrom_v10 does not work.
I do not want to pass to the service center, because I know that there are men of genius, and I hope that soon my problem will be solved.
Somyab said:
I think ur touch is gone now..hope flashtool would recover.but i dont think so by reviews of members
U can check solution here
http://forum.xda-developers.com/showthread.php?t=1713449
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
Check that topic, try the solutions posted there.
I sent mine to service already, ROM testing killed the touchscreen.
Problem solved!
1)Install lastest firmware .62 for wt19i - use Flashtool
2) Install Rage Kernel 2.6 - use Flashtool
3) Then via CM from zip install hybrom_v12. for mini pro
3) Install "Touchscreen.zip" via CWM and reboot system
(Touch screens has to work)
4) Then again flash hybroman_v12 for wt19i
Good luck!!!
djRemov dude, where'd you get that touch flashfile? You made it yourself or is someone developing it? I fixed mine using the Hybrom v12 > Hybroman v12 way (without the file) and it still worked. Just curious..
I dug the hybrom zip and found the exact same hex files on it. Was thinking whether the just the script would work on it's own without flashing the minipro hybrom since they're doing essentially the same thing..
Thx dude
** oh yeah, not gonna test that theory anytime soon. I love my phone when it works~! LoL
neocyke said:
djRemov dude, where'd you get that touch flashfile? You made it yourself or is someone developing it? I fixed mine using the Hybrom v12 > Hybroman v12 way (without the file) and it still worked. Just curious..
I dug the hybrom zip and found the exact same hex files on it. Was thinking whether the just the script would work on it's own without flashing the minipro hybrom since they're doing essentially the same thing..
Thx dude
** oh yeah, not gonna test that theory anytime soon. I love my phone when it works~! LoL
Click to expand...
Click to collapse
I made myself.
At first I wanted to copy a SYS from another phone, but wondered, and concluded that the MINI PRO ROM has changed about the path to the touch screen files in the SYS . Renaming touch_coconut_tpk.hex in touch_mango_....hex, and replaced by one file in the folder firmware.
Do you guys have a link for the Mini Pro ROM? I'm desperate now.. =(
I still have a HYBROMAN v16 do you think that would work?
EDIT: I was able to download HYBROM_V12 but CWM keeps saying that the file is bad. Downloaded and re downloaded at least 10x now.. Any ideas?
UPDATE: For those who are having problems with their touchscreen, this method works! (finally found a working version of hybrom_v12)
@djRemov: You are a god!
djRemov said:
I made myself.
At first I wanted to copy a SYS from another phone, but wondered, and concluded that the MINI PRO ROM has changed about the path to the touch screen files in the SYS . Renaming touch_coconut_tpk.hex in touch_mango_....hex, and replaced by one file in the folder firmware.
Click to expand...
Click to collapse
Lemme see if I understand this right. Basically, what it does is overwrite the hex file and starts the touchscreen script? In which case it continues from the hybrom flash and replaces the hex from the minipro with the lww one?
WT19i Touchscreen Issue Solved
Solution
Follow these steps.
1) First you need to download and copy these two ROM zip files to your SD Card. The download links are given below.
a) (Note: Add (https) then //) before you enter the address which is given below in the address bar for downloading the file.)
|
V
dl.dropbox.com/u/61884099/hybrom_v10.zip
b) (Note: Add (www) then (.) before you enter the address which is given below in the address bar for downloading the file.)
|
V
mediafire.com/?32i7l0w4hpfzx81
2) Switch Off your phone and flash the latest GB Stock Firmware (GB !4.0.2.A.0.62) by using Flash Tool.
You will get this Stock Firmware from here. If you have already downloaded the file, skip this download.
(Note: Add (www) then (.) before you enter the address which is given below in the address bar for downloading the file.)
|
V
mediafire.com/?ervpg54922b9c0p
3) Switch on by connecting usb cable to your computer by press and hold the volume up button on your mobile for Fastboot mode . Download and extract the kernel file which i attached with this post
(kernel_coconut-v4.zip) and flash it via Fastboot Mode in Flash Tool.
4) Switch on your mobile and press the volume down button to enter the CWM Menu and do these things.
a) wipe data/factory reset
b) wipe cache partiton
c) wipe Dalvik Cache
5) After that Do 'Install zip from sdcard' and select hybrom_v10.zip file from your sdcard which you downloaded and copied to your SDCard
earlier.
6) When the installation complete, restart your phone. You will see that your touch is partially working !! Don't waste your time by checking
Touchscreen. Switch off your mobile by remove the battery and put it again.
7) Switch on your mobile and boot into CWM Mode again. Don't do these things(wipe data/factory reset, wipe cache partiton and wipe Dalvik
Cache) again for installing new zip from SDCard. (I'll tell the reason later )
Do 'Install zip from sdcard' and select hybroman_v12.zip file from your sdcard which you downloaded and copied to your SDCard
earlier.
8) After the Installation restart your phone and wait for booting into new ROM hybrom v12. Now you can see that your Touchscreen Issue is
solved !!!! :laugh:
Optional:
If you are facing wifi problem just flash the zip file via CWM (coconut_wlan_v4.zip) which is atteched with this post.
If you are not satisfied with hyvrom v12, you can also flash again the Stock Firmware or any other ROM which only supported by LWW
Cheers and Don't forget to hit the THANKS. Sorry for my bad English
djRemov said:
1)Install lastest firmware .62 for wt19i - use Flashtool
2) Install Rage Kernel 2.6 - use Flashtool
3) Then via CM from zip install hybrom_v12. for mini pro
3) Install "Touchscreen.zip" via CWM and reboot system
(Touch screens has to work)
4) Then again flash hybroman_v12 for wt19i
Good luck!!!
Click to expand...
Click to collapse
So sad, i did but my lww still dont work, only power+walkman+home+volume buttons work.
are there any other ways to fix that problems.
and pls share hybrom_V12 for minipro. i can't search it. so i did with v10.
lww screen cant use
not work master,, any solution for me,,??
please help me master,,
djRemov said:
This is not working, I ran сalibrate.but, rewriting touch_smiltron_sony on touch_coconut_tpk.Hybrom_v10 does not work.
I do not want to pass to the service center, because I know that there are men of genius, and I hope that soon my problem will be solved.
Click to expand...
Click to collapse
:good:
Touch Screen Not Working SK17i
djRemov said:
1)Install lastest firmware .62 for wt19i - use Flashtool
2) Install Rage Kernel 2.6 - use Flashtool
3) Then via CM from zip install hybrom_v12. for mini pro
3) Install "Touchscreen.zip" via CWM and reboot system
(Touch screens has to work)
4) Then again flash hybroman_v12 for wt19i
Good luck!!!
Click to expand...
Click to collapse
Dear Buddy tried your method as well but still no success ????????
non of the solutions seemed to work, maybe we're facing a hardware problem
ironhide3.2 said:
non of the solutions seemed to work, maybe we're facing a hardware problem
Click to expand...
Click to collapse
try this its working .. i have been tested it twice:good::good::good::good::good::good::good:
Things we need:
Flash tools
Rage kernel gb
Stock .62 firmware for your device(ftf)
wrong rom that bricked your touchscreen
What should we do:
1:flash your device gb .62 firmware
2:flash rage kernel
3:flash that wrong rom again
4:if wrong rom was ics,rom will not boot then remove the battery to turn phone off then flash .62 firmware again if it was gb,do the same work
5:wait until stock rom boots the touch will be fixed
6:if touch screen fixed,press thanks button
djRemov said:
1)Install lastest firmware .62 for wt19i - use Flashtool
2) Install Rage Kernel 2.6 - use Flashtool
3) Then via CM from zip install hybrom_v12. for mini pro
3) Install "Touchscreen.zip" via CWM and reboot system
(Touch screens has to work)
4) Then again flash hybroman_v12 for wt19i
Good luck!!!
Click to expand...
Click to collapse
Can i use this touchscreen.zip for my st15i with the same prob???
Hi guys,
I am stuck in a very bad sitituation. I have installed a custom rom, but after some time I came to know I have lost root access. My phone's BLlocked. So cannot install cmw recovery without root. I tried flashing official Sony Xperia sk17i 4.1.b.587 .ftf file. But I am getting error as FLASHING ABORTED and the device restarts. I am attaching the flasboot screenshot. Please help me flash the stock rom, then I will be able to again gain root access.
Thank You.
darushah.shah said:
Hi guys,
I am stuck in a very bad sitituation. I have installed a custom rom, but after some time I came to know I have lost root access. My phone's BLlocked. So cannot install cmw recovery without root. I tried flashing official Sony Xperia sk17i 4.1.b.587 .ftf file. But I am getting error as FLASHING ABORTED and the device restarts. I am attaching the flasboot screenshot. Please help me flash the stock rom, then I will be able to again gain root access.
Thank You.
Click to expand...
Click to collapse
Download ftf from here http://www.mediafire.com/?s166qsg8qaaxc43, place it into firmwares folder(delete all inside the folder before). Flash in flashtools, then flash the firmware that you want
Have you tried to repair it via PC Companion or SEUS?
Well I tried flashing more than 5 times via different ftf file, getting the same error.
Sent from my SK17i using xda premium
darushah.shah said:
Well I tried flashing more than 5 times via different ftf file, getting the same error.
Sent from my SK17i using xda premium
Click to expand...
Click to collapse
Reinstall flashtool and try (don't forget to install flashtool drivers) if the problem still persists I would recommend installing flashtool and it's drivers to another computer and flash from it. It should definitely work.
Click thanks if I helped you!
Sent from my smultron using xda app-developers app
Try this... Don't connect your mobile first... Choose ftf in flashtool... It will prepare files for flashing.. Then will ask to connect your mobile.. Plug your device in flashmode.. Should work..
Sent from my WT19i using xda app-developers app
Yes, do it like rachit.rc96 said, don't connect the mobile first :good:
If this doesn't work, check the box with "no final verification" when you select the firmware and try it again. But if you do this, be sure that this is the right ftf for your device
Ok guys, I'm relatively new here. Been reading a lot, but never posted.
So today I tried to flash my Xperia S with flashtool.
Downloaded CM10 (FXP144), copied the zip file to the phone. etc etc.
fastboot works, but when I'm in CMW recovery and try to install the zip file (FXP144-cm-10-20121026-unofficial-anzu.zip) it fails..
E:error in /sdcard/...zip (status 7) installation abborted.
This means my phone is completely stuck.
What do I have to do?
Been searching and reading the forums for more than 3 hours now, can't find a solution...
Hello,
Think you should post this in Q and A section. I'm not sure of the codename for the Xperia s. But I'm quite sure it's not 'anzu'. Make sure you download the right zip for the device you're flashing to.
Nozomi maybe?
Hit thanks if helped.
Cheers,
Lunar.
Sent from my LT26i using xda app-developers app
My first object is to get my phone back to life again..
anybody?
lunarjetman1 said:
Hello,
Think you should post this in Q and A section. I'm not sure of the codename for the Xperia s. But I'm quite sure it's not 'anzu'. Make sure you download the right zip for the device you're flashing to.
Nozomi maybe?
Hit thanks if helped.
Cheers,
Lunar.
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
DavinciNL said:
My first object is to get my phone back to life again..
anybody?
Click to expand...
Click to collapse
If you can get into cwm then I presume you can download the right file to a PC, and transfer it to your phone by going to the mounts and storage menu in cwm and mounting mass storage?
You should be able to flash the correct file in cwm?
Hit thanks if helped.
Cheers,
Lunar.
Sent from my LT26i using xda app-developers app
Or..
How do I copy the file to my phone..
hey..
DavinciNL said:
Ok guys, I'm relatively new here. Been reading a lot, but never posted.
So today I tried to flash my Xperia S with flashtool.
Downloaded CM10 (FXP144), copied the zip file to the phone. etc etc.
fastboot works, but when I'm in CMW recovery and try to install the zip file (FXP144-cm-10-20121026-unofficial-anzu.zip) it fails..
E:error in /sdcard/...zip (status 7) installation abborted.
This means my phone is completely stuck.
What do I have to do?
Been searching and reading the forums for more than 3 hours now, can't find a solution...
Click to expand...
Click to collapse
try reflashing a stock sony rom via flashtools from the development section!!!
should be good after that!
would you mind giving me a small hand here?
(do you feel the light panic in my writing.. )
capt.macken said:
try reflashing a stock sony rom via flashtools from the development section!!!
should be good after that!
Click to expand...
Click to collapse
DavinciNL said:
Or..
How do I copy the file to my phone..
Click to expand...
Click to collapse
There maybe an option in cwm mounts and storage menu. Mount sdcard, or USB mass storage or something along them lines. Then you can connect phone to PC via USB cable.
Hit thanks if helped.
Cheers,
Lunar.
Sent from my LT26i using xda app-developers app
lunarjetman1 said:
There maybe an option in cwm mounts and storage menu. Mount sdcard, or USB mass storage or something along them lines. Then you can connect phone to PC via USB cable.
Hit thanks if helped.
Cheers,
Lunar.
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Tried to mount..
E:Unable to open usn lunfile (nu such file or directory)
I'm now downloading a stock rom and looking up how to flash it..
DavinciNL said:
Tried to mount..
E:Unable to open usn lunfile (nu such file or directory)
I'm now downloading a stock rom and looking up how to flash it..
Click to expand...
Click to collapse
Hello Guys!
I have a little bit the same problem .
Any luck ?
Look for a stock rom that's a .ftf extension.
Download flashtools.
Reboot in flashboot (Vol down + power)
Flash the ftf file.
Should (hopefully) work?
Edit: Try looking for an ICS rom. The stock ones are kind of every where. GB ones are a lot harder to find.
Snowstormzzz said:
Look for a stock rom that's a .ftf extension.
Download flashtools.
Reboot in flashboot (Vol down + power)
Flash the ftf file.
Should (hopefully) work?
Edit: Try looking for an ICS rom. The stock ones are kind of every where. GB ones are a lot harder to find.
Click to expand...
Click to collapse
Did the job for me!
you can flashing again your stock ROM (ftf) with flashtool and say no to Bootlop
Hi, today I flashed my Xperia Sola using recovery (Locked Bootloader). But instalation failed and now i can't get to the download mode.
And i can't get to the recovery mode too :/
Any help?
Thanks :/
EDIT: After few try i rescue my phone using SUS
flash stock rom for sola using flashtool, if u dont see the firmware stock for sola.. do it manually, copy ftf file and go to flashtool folder (mostly located at C then open and find folder named firmware then paste the stock ftf file. then flash it using flashtool.
napskin16 said:
flash stock rom for sola using flashtool, if u dont see the firmware stock for sola.. do it manually, copy ftf file and go to flashtool folder (mostly located at C then open and find folder named firmware then paste the stock ftf file. then flash it using flashtool.
Click to expand...
Click to collapse
What are you trying to do??????
The last post was almost 4 months old.......