Cant connect to Kies as it says USB device not recognized, used to but not anymore, dont see this problem in the S2 thread, anyone?
Currently using Win7 64
Thx
Same thing happened to me. I just reinstalled making sure all other programs were closed and I haven't had the problem since.
Hope this helps.
Install Kies .
Reboot phone
Start Kies
Connect Let KIES find phone .
Turn KIES off from taskbar .
Turn USB debugging on phone connect USB mass storage mode and let windows find driver .
That do work try all the other posts same subject for an alternative .
jje
No go
Tried all of the above, still no go, could it be my micro usb port on the phone is busted? When i tried connecting as Mass storage it says usb cable is connected, pls remove cable.
cablesguy said:
Tried all of the above, still no go, could it be my micro usb port on the phone is busted? When i tried connecting as Mass storage it says usb cable is connected, pls remove cable.
Click to expand...
Click to collapse
No thats just incorrect user settings .
Remove cable go to settings Applications Turn on USB debugging .
And?or turn usb mass storage mode on via settings Wireless and network USB settings then connect cable .
jje
JJEgan said:
No thats just incorrect user settings .
Remove cable go to settings Applications Turn on USB debugging .
And?or turn usb mass storage mode on via settings Wireless and network USB settings then connect cable .
jje
Click to expand...
Click to collapse
Yup, I did. I removed cables and turned on USB debugging, and tried the mass storage mode, upon connecting it says cable connected and to remove.
I'm getting this problem once I'm in Download mode. It's worked before... why would it stop?
Any tips?
I have the same problem
I seem to have the same problem I connect my phone via USB and get a USB Device Not Recognized message but MTP application opens on the phone. This has only just happened I have had it working before since I had the phone on 2 computers and have tried to different cables now it does not work on either computer. If any one has had any luck I would love to know how you fixed it.
Samsung Galaxy S2 - USB Device not recognized.
Hey Guys,
I have the same problem. I've even tried going into "Recovery" Mode and then running odin.. Still no luck. It just does not recognize the phone.
I tried a different cable but still no luck.
Guys,
i had had the same problem until i started to use the original USB cable(came with the phone).
Have a good luck!
Kirby
Got the same usb problem, different pc's, driver, cables nothing works.
After three month of use no Kies Odin ore mass storage us....big problem
any news info on this? seems to be quite common, though I only get it with stock roms, custom roms dont seem to have this issue
Cables Guy; I'm trying to figure out if I'm having the same problem as you. Does your phone charge when plugged in? Because mine does not.
i think in your case it might be the usb port in the phone itself, if nothing that you plug works well.
I believe there is an issue with kies/MTP and windows drivers for the rest though.
For me my phone doesnt get detected o nmy onboard USB but it does on the usb3 pccard i have.
any good news to solve this problems?
i got the same problem and worst case is my phone cannot detect sim
I had the same problem.. I just switched back to the original cable that came with the phone & problem was solved..
Sent from my SGH-T989D using XDA App
cablesguy said:
Cant connect to Kies as it says USB device not recognized, used to but not anymore, dont see this problem in the S2 thread, anyone?
Currently using Win7 64
Thx
Click to expand...
Click to collapse
whats your phone kernel? and are u able to connect to pc as usb storage? or did u flash anything weird before?
After updating leaked stock firmware 4.0.4
1.Battery started to drain badly
2.There was problem with the USB
Now problem are:
1. USB port not charging
2. Computer does not recognize the device
3. Odin mode is not detecting my phone
4. Getting hotter at the camera spot
But When its switched off as soon as put usb wire into the phone its get switched on..
So tried to change the usb flex still not working what would be the reason still im confused...
Hi dears
I have some problem about charging. First of all I am using neatrom lite + jeboo v1f rebase. The problem is when I plug in my phone for charging my phone detects it few minutes later and same when I unplug the phone. Another thing is connecting the phone to computer by usb cable. Sometimes I can see my phone in my computer but sometimes my pc give error that unknown device connected.
What do u think about this? What could be the main problem for that. In my opinion my phone's plug area.
B.rgds
Sent from my GT-I9100
You could try and re-install the Samsung USB Drivers.
If that doesn't work then try to completely wipe KIES and the installed drivers from your computer and then re-instlling it from samsung.com.
That should work since Kies has had an update, but if it doesn't, then indeed it's the USB inserter in your phone (don't know what it's called ) which is the problem.
I have searched all the threads I can find and can't find an answer so please forgive me if this is a common problem.
To make a long story short I had to replace my LCD and then the digitizer stopped working. I did a factory reset which solved the problem but then when I tried to install my backup I messed everything up and nothing was working. I could no longer connect any computer to my phone using several different USB cables. All my google services were not working along with my proximity sensor and light sensor.
I was able to get a fenny rooted stock rom to install using Mobile Odin Pro and I seem to have most of everything working again except the USB port.
I was unable to connect to a computer or charge. After trying everything I could find online including factory resets, *#0808# settings, USB debugging mode, I broke down and ordered a new USB port which I installed into my phone and I am having the same problem with the new port installed.
When I plug my phone into the charger it does nothing however if I turn the screen off and wait about 3 to 5 minutes the LCD will light up and indicate that it is charging and then the phone takes a charge. If I use the phone while it is plugged in it will never indicate that it is charging, I have to power the screen off for several minutes. I have tried a second known good battery and I have the same issue. I have tried two separate factory chargers which both work fine on my wife's S4 and neither work properly with my phone.
When I plug it into my computer I do not get the normal message to select MTP or camera. using the settings recommended on *#0808# of USB of AP and USB Settings of MTP + ADB.
If I use *#0808# and select CP under the USB tab and then plug the phone into my computer I hear my computer instantly make the sound it usually makes when you plug a usb device in but nothing else happens. This same computer works fine with my wife's other Galaxy S4 and I have tried this on three separate computers with the same result so I don't think it is a computer or usb cable issue.
Is there a way that I somehow deleted drivers or a file on my phone that controls the USB port? I am unable to attach screenshots on this post for some reason so below is what my about phone screen shows. Is it possible I have the wrong kernel or radio installed that could be causing this issue?
Model Number
SGH-M919
Android Version
4.4.2
Baseband Version
M919UVUEMK2
Kernel Version
3.4.0-g4224a08-dirty
[email protected]#8
Tue Mar 25 18:18:23 MDT 2014
Build Number
KOT49H.M919UVUFNB4
SE for Android Status
Permissive
Secure boot status
Type: Samsung
Security Software Version
MDF v1.0 Release 2
When I dial *#0808# this is what I see
USB
______________________________________
() CP
(*) AP (I selected AP)
USB SETTINGS
_______________________________________
(*) MTP (this is currently selected)
() MTP + ADB (I have tried this setting also and it did not work)
() PTP
() PTP + ADB
() RNDIS + DM + MODEM
() RMNET + DM + MODEM
() DM + MODEM +ADB
OK REBOOT
I would really appreciate any help someone can give me. Thank you in advance. If anyone is local to Rhode Island and willing to help me out in person I would be willing to pay you for your time, I just want to get this to work as I use my phone for work and need to be able to transfer files to my computer.
Last night I changed the SD card and when I did I plugged it into my computer and it started to charge. After about 10 minutes the computer beeped and I was now able to access my files on both my phone and SD card but it was not showing as connected using Kies.
It worked off and on today but now when I plug it in device manager shows qualcomm CDMA technologies MSN with a yellow explanation point saying driver not installed. When I plug my wife's s4 into this computer it works fine. Is it possible my s4 is somehow showing up to my computer as a galaxy note? That is the phone that I find in Google when I search that qualcomm driver.
I'm having an issue with my Samsung Galaxy S2 GT-I9100 (running on stock Jellybean 4.1.2) no longer connecting to the PC via USB. It had been working fine up until a few days ago.
When I connect the USB cable, it only charges the phone. It doesn't show that it is connected in MTP mode and no USB options appear in the pull down notification bar. I tried locating the phone on the computer in Windows Explorer and the Device Manager, but it wasn't there at all. There also wasn't any unrecognised device in the Device Manager.
I’ve tried the following:
Using different USB cables. Tried two official Samsung cables, a Belkin charge/sync cable and a generic cable
Plugging into different USB ports on 3 different PCs/notebooks (running on Windows 7/8)
Turning on/off USB debugging mode on the phone
Going into Settings>Wireless and networks>USB utilities. After tapping "Connect storage to USB", it will prompt to connect a USB cable even though it is already plugged in.
Booting the phone in safe mode and connecting the USB cable
Installing the latest version of KIES. I had never used the software before but gave it a try. KIES wouldn't detect the phone
Uninstalling and reinstalling the latest Samsung drivers
Dialling *#7284# for the PhoneUtil options and checking it was PDA mode under the USB option.
Turning off the phone, removing then re-inserting the SIM card and battery
Cleaning the micro USB port on the phone
I have not made any changes to the phone (or PCs), so I'm not sure what has happened for the USB connection to stop working.
Your assistance would be much appreciated.
That is very weird. Are sure you didn't change the USB connection type?
danielbe said:
That is very weird. Are sure you didn't change the USB connection type?
Click to expand...
Click to collapse
Definitely sure.
I'm wondering if maybe the micro usb port is damaged, even though there's no problems charging the phone.
That is very possible, the port can be damaged in a way that only allows charging.
Hey guys, My micro-usb was damaged so i changed it with a new one... It didn't work and phone was charging instead of Mass Storage or Debugging mode !
I thought its fake and a bad quality micro-usb so i changed it again and still have the same problem.
I have the same computer, same cable and everything is same, even the programs which i installed in both phone and pc are same, but it wont connect to pc.
My moms phone can be connected with my cable.
Ok, before i change the Micro-Usb, it was fine but not charging as good as normal. I mean at least i was able to upgrade or downgrade my android version )
Can anyone help me ? I already did a factory reset and removed the SD card. No lucks ... ( i also tried other cables and other computers, but the problem is ONLY with my damn phone )
I'm running Android 4.0.3 KH3