Related
Hey plz tell me in detail how do i install custom rom (most stable with excellent performance) in my lg p500!!!
plz answer in detail including how do i wipe sd card and all
THnx in advandee
Have you rooted your phone?
Well I'll assume that you have an P500 with v2.2.2, Stock Rom Untouched.
Firstly you would want to root the phone. http://forum.xda-developers.com/showthread.php?t=1044765
Download Gingerbreak
- Make sure USB debugging is enabled(Can be enabled through settings)
- Make sure you have an SD card (formatted and) inserted
- Place the app onto the root of your SD card
- Open the APK, press the root button
- Wait a few minutes. If there are no problems, the device will reboot (note that the reboot itself can take like 10 minutes due to cache wipe)
Congratulations the phone is rooted.
danialrocker said:
Have you rooted your phone?
Well I'll assume that you have an P500 with v2.2.2, Stock Rom Untouched.
Firstly you would want to root the phone. http://forum.xda-developers.com/showthread.php?t=1044765
Download Gingerbreak
- Make sure USB debugging is enabled(Can be enabled through settings)
- Make sure you have an SD card (formatted and) inserted
- Place the app onto the root of your SD card
- Open the APK, press the root button
- Wait a few minutes. If there are no problems, the device will reboot (note that the reboot itself can take like 10 minutes due to cache wipe)
Congratulations the phone is rooted.
Click to expand...
Click to collapse
ya i have rooted!!!
i have 2.2.1 and recovery of
Build : RA-thunderg-1.2.0-GNM
how do i install cm7 and wipe and other things
thnx in advance
danialrocker said:
Have you rooted your phone?
Well I'll assume that you have an P500 with v2.2.2, Stock Rom Untouched.
Firstly you would want to root the phone. http://forum.xda-developers.com/showthread.php?t=1044765
Download Gingerbreak
- Make sure USB debugging is enabled(Can be enabled through settings)
- Make sure you have an SD card (formatted and) inserted
- Place the app onto the root of your SD card
- Open the APK, press the root button
- Wait a few minutes. If there are no problems, the device will reboot (note that the reboot itself can take like 10 minutes due to cache wipe)
Congratulations the phone is rooted.
Click to expand...
Click to collapse
ya i have rooted!!!
i have 2.2.1 and recovery of
Build : RA-thunderg-1.2.0-GNM
how do i install cm7 and wipe and other things
thnx in advance
After rooting your phone, you must have 1) Recovery Installer
2) Terminal Emulator (Free from market)
3) The Custom Rom
I recommend FranciscoFranco's Rom as it contains excellent tweaks without hassle of flashing many files which may cause your phone to brick.
Recovery Installer, You can get it from: http://dl.dropbox.com/u/11987571/quick/recovery_installer.rar
when you have everything, lets start
1. extract contents of "recovey_installer.rar" to the root(meaning the base) of your SDcard.(it contains 3 files, so you should also see 3 new files on your SD card).
2. open terminal emulator, enter these lines(press enter after each line):
Code:
su
sh /sdcard/rf.sh
just wait and this should reboot you directly to recovery.
3. now in recovery(remember: "vol + and - button" is "up and down" "menu button is ok/select" and "back button" is back)
Congratulations, Your Recovery Installer is installed.
Now, You can get FranciscoFranco's Rom which is called Devoid from
here: http://forum.xda-developers.com/showthread.php?t=1049518
Download franco.devoid and the kernel.
Go to recovery boot
1.Select Wipe and Wipe everything and that includes data+factory settings, cache, system, .android-secure and sd-ext partition (if you had it already)
2. Select ext partition and choose either ext2/3/4 : 512mb,swap:0
3.Toggle usb connection and place devoid.franco and the kernel zip files onto your sd card.
4.Select flash and flash devoid.franco first then flash the kernel.You do not need to toggle signature verify as it should have signatured. If you are a ***** then carry on and toggle signature verify.
5.Reboot.
Enjoy
You can thank me by pressing the thank button
virusshah1997 said:
ya i have rooted!!!
i have 2.2.1 and recovery of
Build : RA-thunderg-1.2.0-GNM
how do i install cm7 and wipe and other things
thnx in advance
Click to expand...
Click to collapse
There's an option where it says "wipe" when you are in your recovery boot you should enter that category and wipe what the developer says.
Also there should be a guide of how to flash cm7 onto your phone in the thread itself
There shouldn't be any problem .
Do you mean you do not know how to enter recovery boot menu?
If so, open your terminal emulator and type
su
reboot recovery
It will reboot your phone to recovery boot.
Then wipe what the developer asks you to wipe,
make the partition on your sd card wether its ext2/3/4
Then flash it.
danialrocker said:
After rooting your phone, you must have 1) Recovery Installer
2) Terminal Emulator (Free from market)
3) The Custom Rom
I recommend FranciscoFranco's Rom as it contains excellent tweaks without hassle of flashing many files which may cause your phone to brick.
Recovery Installer, You can get it from: http://dl.dropbox.com/u/11987571/quick/recovery_installer.rar
when you have everything, lets start
........
Click to expand...
Click to collapse
Sorry i had cut down your post a little bit, as i was quoting it
Thanks from my side
As you made it very easy for us to understand on how to flash with custom roms
danialrocker said:
After rooting your phone, you must have 1) Recovery Installer
2) Terminal Emulator (Free from market)
3) The Custom Rom
I recommend FranciscoFranco's Rom as it contains excellent tweaks without hassle of flashing many files which may cause your phone to brick.
Recovery Installer, You can get it from: http://dl.dropbox.com/u/11987571/quick/recovery_installer.rar
when you have everything, lets start
1. extract contents of "recovey_installer.rar" to the root(meaning the base) of your SDcard.(it contains 3 files, so you should also see 3 new files on your SD card).
2. open terminal emulator, enter these lines(press enter after each line):
Code:
su
sh /sdcard/rf.sh
just wait and this should reboot you directly to recovery.
3. now in recovery(remember: "vol + and - button" is "up and down" "menu button is ok/select" and "back button" is back)
Congratulations, Your Recovery Installer is installed.
Now, You can get FranciscoFranco's Rom which is called Devoid from
here: http://forum.xda-developers.com/showthread.php?t=1049518
Download franco.devoid and the kernel.
Go to recovery boot
1.Select Wipe and Wipe everything and that includes data+factory settings, cache, system, .android-secure and sd-ext partition (if you had it already)
2. Select ext partition and choose either ext2/3/4 : 512mb,swap:0
3.Toggle usb connection and place devoid.franco and the kernel zip files onto your sd card.
4.Select flash and flash devoid.franco first then flash the kernel.You do not need to toggle signature verify as it should have signatured. If you are a ***** then carry on and toggle signature verify.
5.Reboot.
Enjoy
You can thank me by pressing the thank button
Click to expand...
Click to collapse
When ever i type
su
sh /sdcard/rf.sh
It say not found
iamrajeev said:
When ever i type
su
sh /sdcard/rf.sh
It say not found
Click to expand...
Click to collapse
HeY!
Have u copied files on root of ur sd card?
(on sdcard not in any folder)
Extaract it and den copy it
it in root..i coped there & than extracted
iamrajeev said:
it in root..i coped there & than extracted
Click to expand...
Click to collapse
add me in fb.... i will teach u
id de add kar leta
virusshah1997 said:
add me in fb.... i will teach u
Click to expand...
Click to collapse
good virusshah good to see u helping enjoy
Hi all,
I hope this thread won't be marked as spam, but i can't find solutions to my problem.
A few days ago I installed Jelly Bean Firmware (4.1.2 I9100XXLSJ) on my Galasy S2. I folowed some tutorial and based on this tutorial everything should look fine, but isn't.
Now my GS2 freeze and restart very (very) often, maibe it is hard to cound how many times per day. It can restart itslef till few minut in use and many times.
I can locate some special situations, when the gs2 freeze is for example when I write sms, write something in gtalk, or only just aj move by homescreens.
Sometime it restart on few second look like touchewiz is retarted, but sometime i must putt the battery off and put it back.
Can anybody help me?
Any ideas can be helpful.
Thanks a lot....
[email protected] said:
Hi all,
I hope this thread won't be marked as spam, but i can't find solutions to my problem.
A few days ago I installed Jelly Bean Firmware (4.1.2 I9100XXLSJ) on my Galasy S2. I folowed some tutorial and based on this tutorial everything should look fine, but isn't.
Now my GS2 freeze and restart very (very) often, maibe it is hard to cound how many times per day. It can restart itslef till few minut in use and many times.
I can locate some special situations, when the gs2 freeze is for example when I write sms, write something in gtalk, or only just aj move by homescreens.
Sometime it restart on few second look like touchewiz is retarted, but sometime i must putt the battery off and put it back.
Can anybody help me?
Any ideas can be helpful.
Thanks a lot....
Click to expand...
Click to collapse
try re-flashing the rom once again and see
I'll try it
Sun90 said:
try re-flashing the rom once again and see
Click to expand...
Click to collapse
Of course try it.... I try to format sd cart... but.. without any different
[email protected] said:
Hi all,
I hope this thread won't be marked as spam, but i can't find solutions to my problem.
A few days ago I installed Jelly Bean Firmware (4.1.2 I9100XXLSJ) on my Galasy S2. I folowed some tutorial and based on this tutorial everything should look fine, but isn't.
Now my GS2 freeze and restart very (very) often, maibe it is hard to cound how many times per day. It can restart itslef till few minut in use and many times.
I can locate some special situations, when the gs2 freeze is for example when I write sms, write something in gtalk, or only just aj move by homescreens.
Sometime it restart on few second look like touchewiz is retarted, but sometime i must putt the battery off and put it back.
Can anybody help me?
Any ideas can be helpful.
Thanks a lot....
Click to expand...
Click to collapse
Typical result of flashing new Rom without full wipe
So just reflash Rom but this time with full wipe (backup data/apps fist, if not already happened)
Much success,
CHEERS
---------- Post added at 03:23 PM ---------- Previous post was at 03:22 PM ----------
[email protected] said:
Of course try it.... I try to format sd cart... but.. without any different
Click to expand...
Click to collapse
What u mean with "format sd card"
How was ur flash way?
Did u flash another kernel?
Hannibal226 said:
Typical result of flashing new Rom without full wipe
So just reflash Rom but this time with full wipe (backup data/apps fist, if not already happened)
after I flash my gs2 I use the full wipe ( power button + home + volume up) and navigate to wipe ....
Much success,
CHEERS
---------- Post added at 03:23 PM ---------- Previous post was at 03:22 PM ----------
What u mean with "format sd card"
How was ur flash way?
Did u flash another kernel?
Click to expand...
Click to collapse
What u mean with "format sd card" -> trought gparted I format usb space in gs2, normaly as another partition..
How was ur flash way? I can past here a link (cause iam a noowbie)
[email protected] said:
What u mean with "format sd card" -> trought gparted I format usb space in gs2, normaly as another partition..
How was ur flash way? I can past here a link (cause iam a noowbie)
Click to expand...
Click to collapse
OK
I post u my guide...
only thing I've to know is:
Do u have the CWM (recovery mode [where u can flash from phone])?
Or u now have to flash from PC (phone in download mode)?
CHEERS
PS: U have already saved ur data?
Hannibal226 said:
OK
I post u my guide...
only thing I've to know is:
Do u have the CWM (recovery mode [where u can flash from phone])?
Or u now have to flash from PC (phone in download mode)?
CHEERS
Click to expand...
Click to collapse
I flas my gs2 from PC - in download mode....
[email protected] said:
I flas my gs2 from PC - in download mode....
Click to expand...
Click to collapse
OK, All right.
So don't worry all is fine
=> Root
1) Download Odin (http://androidfirmwares.net/Tools)
2) Download root kernel (http://forum.xda-developers.com/showthread.php?t=1103399)
-- just scroll down and search for ur version (settings>about phone>basis version)
3) Flash it via Odin
-- Extract .zip
-- load the root kernel in Odin (as PDA)
-- Put SGSII in download mode (Vol-, Home and Powerbutton)
-- Press "Start"
4) Phone will reboot by itself.
=> Now start the process for flash Rom.
1) Download Rom
2) Put it on internal sd card
3) Go into recovery mode (see above)
4) DO A FULL WIPE!! (U won't loose ur backup on sd card [but u can copy it to PC, too, if u want])
-- wipe data/ factory reset
-- wipe cahe partition
-- advanced > wipe dalvik cache
-- mount and storage > format data/system/cache
5) Then flash Rom via recovery
-- install .zip from sd card > choose .zip from sd card
-- Select the downloaded Custom Rom and flash it
6) Reboot and u r done!
So be cool an do all, step for step.
Hope u know ur basis version of android
MUCH SUCCESS
Hannibal226 said:
OK, All right.
So don't worry all is fine
=> Root
1) Download Odin (http://androidfirmwares.net/Tools)
2) Download root kernel (http://forum.xda-developers.com/showthread.php?t=1103399)
-- just scroll down and search for ur version (settings>about phone>basis version)
3) Flash it via Odin
-- Extract .zip
-- load the root kernel in Odin (as PDA)
-- Put SGSII in download mode (Vol-, Home and Powerbutton)
-- Press "Start"
4) Phone will reboot by itself.
=> Now start the process for flash Rom.
1) Download Rom
2) Put it on internal sd card
3) Go into recovery mode (see above)
4) DO A FULL WIPE!! (U won't loose ur backup on sd card [but u can copy it to PC, too, if u want])
-- wipe data/ factory reset
-- wipe cahe partition
-- advanced > wipe dalvik cache
-- mount and storage > format data/system/cache
5) Then flash Rom via recovery
-- install .zip from sd card > choose .zip from sd card
-- Select the downloaded Custom Rom and flash it
6) Reboot and u r done!
So be cool an do all, step for step.
Hope u know ur basis version of android
MUCH SUCCESS
Click to expand...
Click to collapse
This tutorial look very good, but(sry iam a newbie) but i dont know which kernel should i download...can u help me find thi which one?
My info from phone..
Model number - GT-I9100
Andoroid version - 4.1.2
Baseband version - I9100XXLS6
kernel version - 3.0.31-462349 [email protected] #3 SMP PREEMPT Tue Nov 6 02:42:23 KST 2012
Build number JZ054K.I9100CCLSJ
Hannibal226 said:
Typical result of flashing new Rom without full wipe
So just reflash Rom but this time with full wipe (backup data/apps fist, if not already happened)
Much success,
CHEERS
---------- Post added at 03:23 PM ---------- Previous post was at 03:22 PM ----------
What u mean with "format sd card"
How was ur flash way?
Did u flash another kernel?
Click to expand...
Click to collapse
Flashing with full wipe is OK! Thanks!
[email protected] said:
This tutorial look very good, but(sry iam a newbie) but i dont know which kernel should i download...can u help me find thi which one?
My info from phone..
Model number - GT-I9100
Andoroid version - 4.1.2
Baseband version - I9100XXLS6
kernel version - 3.0.31-462349 [email protected] #3 SMP PREEMPT Tue Nov 6 02:42:23 KST 2012
Build number JZ054K.I9100CCLSJ
Click to expand...
Click to collapse
4.1.2
So u already flashed once and I think u have already the CWM.
Do the following:
Turn the phone off
Hold Vol+, Home and Powerbutton
Tell me if u are in an recoverymode (U should the "install .zip from sd card", "backup and restore" and some points more)
If u see this u only have to do the second part of my guide.
CHEERS
Ash-Shaybanee said:
Flashing with full wipe is OK! Thanks!
Click to expand...
Click to collapse
Hi all,
i try to full wipe and flash my android, but it won't work. My android still freeze and reboot itself very very often.
I can't use the tutorial whit send me Hannibal226, cause I can find a appropriate kernel.
Can anybody help?
Any help and ideas will be great.
Thanks a lot....
Hannibal226 said:
4.1.2
So u already flashed once and I think u have already the CWM.
Do the following:
Turn the phone off
Hold Vol+, Home and Powerbutton
Tell me if u are in an recoverymode (U should the "install .zip from sd card", "backup and restore" and some points more)
If u see this u only have to do the second part of my guide.
CHEERS
Click to expand...
Click to collapse
Sorry but, I dont follow your tuttorial cause, i dont know wich kernel i should use... This my info are which i have current (classical flash through odin and wipe)
When I go to recovery mode using Hold Vol+, Home and Powerbutton, I see only this options:
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
[email protected] said:
Sorry but, I dont follow your tuttorial cause, i dont know wich kernel i should use... This my info are which i have current (classical flash through odin and wipe)
When I go to recovery mode using Hold Vol+, Home and Powerbutton, I see only this options:
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
Click to expand...
Click to collapse
Ok this won' listen like the "right" CWM.
So now do this:
=>Flash root kernel with CWM
1) Download Odin (http://androidfirmwares.net/Tools)
2) Download root kernel m(http://d-h.st/Bcf)
3) Flash it via Odin
-- Extract .zip
-- load the root kernel in Odin (as PDA)
-- Put SGSII in download mode (Vol-, Home and Powerbutton)
-- Press "Start"
4) Phone should reboot by itself
1) Download Links (see at the bottom)
2) Put it on internal sd card
3) Go into recovery mode
4) DO A FULL WIPE!! (U won't loose ur backup on sd card [but u can copy it to PC, too, if u want])
-- wipe data/ factory reset
-- wipe cahe partition
-- advanced > wipe dalvik cache
-- mount and storage > format data/system/cache
5) Then flash Rom
-- install .zip from sd card > choose .zip from sd card
-- Select the downloaded Custom Rom and flash it
6) Then flash Gapps
-- install .zip from sd card > choose .zip from sd card
-- Select the downloaded Custom Rom and flash it
7) Recovery > wipe cache partition
8) Recovery > advanced > wipe dalvik cache
9) Then flash Dorimanx
-- install .zip from sd card > choose .zip from sd card
-- Select the downloaded Custom Rom and flash it
6) Reboot and u r done!
Links:
ROM u can choose what u like - I'm using at the moment this: http://goo.im/devs/RootBox/RootBox_i9100_jb/RootBox-JB-i9100-V3.2.zip
Dorimanx Kernel
Gapps
CHEERS
Hannibal226 said:
Ok this won' listen like the "right" CWM.
So now do this:
=>Flash root kernel with CWM
1) Download Odin (http://androidfirmwares.net/Tools)
2) Download root kernel m(http://d-h.st/Bcf)
3) Flash it via Odin
-- Extract .zip
-- load the root kernel in Odin (as PDA)
-- Put SGSII in download mode (Vol-, Home and Powerbutton)
-- Press "Start"
4) Phone should reboot by itself
1) Download Links (see at the bottom)
2) Put it on internal sd card
3) Go into recovery mode
4) DO A FULL WIPE!! (U won't loose ur backup on sd card [but u can copy it to PC, too, if u want])
-- wipe data/ factory reset
-- wipe cahe partition
-- advanced > wipe dalvik cache
-- mount and storage > format data/system/cache
5) Then flash Rom
-- install .zip from sd card > choose .zip from sd card
-- Select the downloaded Custom Rom and flash it
6) Then flash Gapps
-- install .zip from sd card > choose .zip from sd card
-- Select the downloaded Custom Rom and flash it
7) Recovery > wipe cache partition
8) Recovery > advanced > wipe dalvik cache
9) Then flash Dorimanx
-- install .zip from sd card > choose .zip from sd card
-- Select the downloaded Custom Rom and flash it
6) Reboot and u r done!
Links:
ROM u can choose what u like - I'm using at the moment this: http://goo.im/devs/RootBox/RootBox_i9100_jb/RootBox-JB-i9100-V3.2.zip
Dorimanx Kernel
Gapps
CHEERS
Click to expand...
Click to collapse
Ok. first part of tutorial I think is without problem...
But after I root (by boot the small yellow triangel is located) im not able to start device.... (some jing jang logo is only on display)
Only one different.. can i install it from internal sd card?
Hannibal226 said:
Ok this won' listen like the "right" CWM.
So now do this:
=>Flash root kernel with CWM
1) Download Odin (http://androidfirmwares.net/Tools)
2) Download root kernel m(http://d-h.st/Bcf)
3) Flash it via Odin
-- Extract .zip
-- load the root kernel in Odin (as PDA)
-- Put SGSII in download mode (Vol-, Home and Powerbutton)
-- Press "Start"
4) Phone should reboot by itself
1) Download Links (see at the bottom)
2) Put it on internal sd card
3) Go into recovery mode
4) DO A FULL WIPE!! (U won't loose ur backup on sd card [but u can copy it to PC, too, if u want])
-- wipe data/ factory reset
-- wipe cahe partition
-- advanced > wipe dalvik cache
-- mount and storage > format data/system/cache
5) Then flash Rom
-- install .zip from sd card > choose .zip from sd card
-- Select the downloaded Custom Rom and flash it
6) Then flash Gapps
-- install .zip from sd card > choose .zip from sd card
-- Select the downloaded Custom Rom and flash it
7) Recovery > wipe cache partition
8) Recovery > advanced > wipe dalvik cache
9) Then flash Dorimanx
-- install .zip from sd card > choose .zip from sd card
-- Select the downloaded Custom Rom and flash it
6) Reboot and u r done!
Links:
ROM u can choose what u like - I'm using at the moment this: http://goo.im/devs/RootBox/RootBox_i9100_jb/RootBox-JB-i9100-V3.2.zip
Dorimanx Kernel
Gapps
CHEERS
Click to expand...
Click to collapse
Thanks a lot it will works, but may I install in this way this rom 4.1.2 Jelly Bean I9100XXLSJ also?
[email protected] said:
Ok. first part of tutorial I think is without problem...
But after I root (by boot the small yellow triangel is located) im not able to start device.... (some jing jang logo is only on display)
Only one different.. can i install it from internal sd card?
Click to expand...
Click to collapse
[email protected] said:
Thanks a lot it will works, but may I install in this way this rom 4.1.2 Jelly Bean I9100XXLSJ also?
Click to expand...
Click to collapse
Gr8 to hear, that it worked now.
I think it's bit more clearer for u now, how u can flash any .zip via sd card
Yep u can flash Jelly Bean for sure, too.
It also was the one I choosed for me.
So just do the same like in guide, but replace the Rom with the Jelly Bean .zip.
If it's not a flashable .zip, u have to flash the .tar via odin (like in first part).
Hope u understand all?! :silly:
CHEERS
Hannibal226 said:
Gr8 to hear, that it worked now.
I think it's bit more clearer for u now, how u can flash any .zip via sd card
Yep u can flash Jelly Bean for sure, too.
It also was the one I choosed for me.
So just do the same like in guide, but replace the Rom with the Jelly Bean .zip.
If it's not a flashable .zip, u have to flash the .tar via odin (like in first part).
Hope u understand all?! :silly:
CHEERS
Click to expand...
Click to collapse
So I downloaded the I9100XXLSJ_I9100OXXLS1_OXX.zip fiel. When I unzip this package i can find some more files like:
CODE_I9100XXLSJ.zip
CSC_HOME_OXX_I9100OXXLS1.zip
MODEM_I9100XXLS6.zip
CHECKSUM
emmc_EXT4_16GB.pit
So which one i should choose to flash it from the internal card?
[email protected] said:
So I downloaded the I9100XXLSJ_I9100OXXLS1_OXX.zip fiel. When I unzip this package i can find some more files like:
CODE_I9100XXLSJ.zip
CSC_HOME_OXX_I9100OXXLS1.zip
MODEM_I9100XXLS6.zip
CHECKSUM
emmc_EXT4_16GB.pit
So which one i should choose to flash it from the internal card?
Click to expand...
Click to collapse
all of them, via ODIN!
If u unzip them again, u should the .tar or .md5 files.
1) Load files
code.tar in PDA
modem.tar in PHONE
csc.tar in CSC
.pit file u load in PIT
2) Connect phone to PC
- bring phone in download mode (Vol-,Home and Powerbutton)
- connect via usb cable
3) Odin should recognized the phone
4) Check the "re-partition"
5) START
That's all. But then u don't have any root then. if u need u have to flash a rooted one via Odin afterwards, but first let the LS1 run on ur phone
Much success,
CHEERS
SIP
Is SIP account available in JB?
by this mod xperia u users (ics) will b able to unlock their phone by sliding then pin/password/pattern to unlock the phone.
when u will slide then you will be asked to enter pin or password or pattern which ever you have enabled as your lock settings other than slide ofcrse.
instructions;
1. download android policy.jar
2. take any cwm flashable zip eg. xxxxx.zip (create a folder "system" inside system make another folder "framework")
3. place the downloaded android policy.jar in framework folder which you have created just now
4. chech that you have done above instructions carefully
5. place the modified xxxxx.zip in your phone storage
6. boot into recovery
7. flash the zip -> wipe cache partition -> wipe dalvik cache
8. reboot and enjoy
dr.sushant said:
by this mod xperia u users (ics) will b able to unlock their phone by sliding then pin/password/pattern to unlock the phone.
when u will slide then you will be asked to enter pin or password or pattern which ever you have enabled as your lock settings other than slide ofcrse.
instructions;
1. download android policy.jar
2. take any cwm flashable zip eg. xxxxx.zip (create a folder "system" inside system make another folder "framework")
3. place the downloaded android policy.jar in framework folder which you have created just now
4. chech that you have done above instructions carefully
5. place the modified xxxxx.zip in your phone storage
6. boot into recovery
7. flash the zip -> wipe cache partition -> wipe dalvik cache
8. reboot and enjoy
Click to expand...
Click to collapse
it works in Xperia P ICS???
Reply to: reggie2
i havent tried yet. but it should work. before trying on xperia P...make two zipped folders. one for original..take a backup of ur original android policy.jar and then try it.. cuz if u land up in boot loop u can flash the original
Nice
thanx mate i am searching for that.:good:
@dr.sushant could you tell me what files you edited please im trying to make ics locksceen work on my jellybean but the slider don'tt work propery
Please, i am new in it and i don't understand it very well.
i'd like to have Revolutionary S5 V3 intalled in my s3, so could you help me with exactally the files to download and the steps to install the rom?
thanks
marcoabpaes said:
Please, i am new in it and i don't understand it very well.
i'd like to have Revolutionary S5 V3 intalled in my s3, so could you help me with exactally the files to download and the steps to install the rom?
thanks
Click to expand...
Click to collapse
Hello if you want to have the rom installed on your device the steps to install this rom are "
Step 1 - Download Revolutionary S5 Android 4.4.2 ROM for Galaxy S III to your computer.
Step 2 - Connect and mount your Galaxy S3 USB memory on your computer using the USB cable.
Step 3 - Now copy/paste the downloaded Android 4.4.2 ROM zip file to your SD card. Make sure the file is in the SD card root (not in any folder).
Step 4 - Then turn OFF your phone and disconnect from the USB cable.
Step 5 - Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together.
Step 6 - Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset” Use the Power button to select everything while in the Recovery Mode.
Step 7 - Then, perform a cache wipe by selecting “wipe cache partition”
Step 8 - Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.
Step 9 - Then go back to the main recovery screen and select “install zip from SD card”.
Step 10 - Now select “choose zip from sdcard”. Using your volume keys, navigate to the Android 4.4.2 ROM zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.
Step 11 - After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now” from the recovery menu.
after this your phone will take roughly five mins to download
the download link is http://forum.xda-developers.com/devdb/project/dl/?id=4922
sorry if a rule has been broken giving a link
thanks, i got confused because there are lots of information in the topic, like DUALBOOT , Bloat content, Extra's content and Theming content.
Do i have to download all that?
marcoabpaes said:
thanks, i got confused because there are lots of information in the topic, like DUALBOOT , Bloat content, Extra's content and Theming content.
Do i have to download all that?
Click to expand...
Click to collapse
Hello
Just to explain dual boot is only if you want to run two different roms on your phone such as stock samsung rom and s5 sensation, bloat content is included with the rom and during the installtion you are asked what you want to install and what you don't depending on your needs this also happens with the extra content and theming content however more can be downloaded from the developer how ever most other content for a rom that isnt included with the rom isnt really needed.
Ok. I will try that. Thank you
Sent from my GT-I9300 using XDA Free mobile app
Hi everyone,
I successfully flashed CWM 6.0.4.7 on my 501L X1. This is thanks to the great folks at android-hilfe.de who compiled the links and most importantly the talented people at huafans.cn who created it.
This is NOT my work but I am sharing it for everyone's benefit. It helps if you can read Chinese though
Source forum: http://huafans.cn/forum-323-1.html
NEW
For 4.4.2 - 2014-10-08
https://drive.google.com/file/d/0B8-peidjMwx4ZUo3enVGOFVqckE/view?usp=sharing
For 4.2.2
Recovery link on android-hilfe: http://www.android-hilfe.de/root-cu...diapad-x1/601335-cwm-mediapadx1-download.html
Instructions:
Download and unzip the file recovery_cn.img.zip
Place the recovery_cn.img or recovery_cn_4.4.2.img onto the root folder of your SDcard
Install Flashify from the Playstore
Run Flashify and tell it to flash Recovery image > Choose a file > navigate via the file manager and choose the img file.
Execute, and reboot to Recovery to enjoy your new recovery.
A brief translation
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Main Menu:
1. Reboot Device
2. Choose ZIP to flash
3. Clear Data/Factory Reset
4. Clear Cache
5. Backup / Restore
6. Microsd functions
7. Advanced Functions
2. Choose ZIP to flash
a. Choose file from /sdcard (ie internal)
b. Choose file from /storage/sdcard1 (ie external)
c. Choose from last used location
d. Enable ADB Sideload (!!!!!!!!!)
e. Do not use signature verification
f. Back to previous menu
3. Clear Data/Factory Reset
a. No
b. Yes - clear all user data
c. Back to previous menu
4. Clear Cache
a. No
b. Yes - clear cache
c. Back to previous menu
5. Backup / Restore:
a. Backup to /sdcard (ie internal)
b. Choose from /sdcard which backup you would like to restore
c. Delete backups from /sdcard
d. Choose from /sdcard using advanced options
e. Backup to /storage/sdcard1 (ie external)
f. Choose from /storage/sdcard1 which backup you would like to restore
g. Delete backups from /storage/sdcard1
h. Choose from /storage/sdcard using advanced options
i. Released unused space from backup (not sure what this does)
j. Choose default backup format (tar, gzip etc)
6. Microsd functions - I am not sure what this does, it lists a bunch of locations
7. Advanced Functions
a. Reboot into Recovery
b. Reboot into Bootloader
c. Shutdown device
d. Clear Dalvik Cache
e. Report Errors
f. Zipalign ????
g. Don't know what this is
If anyone else can help, this will be great.
Great news
If it really works, it's the beginning of "rom makers" !!:good:
Best translation in English!
Kindly yours from an old man:angel:
joytest said:
Hi everyone,
I successfully flashed CWM 6.0.4.7 on my 501L X1. This is thanks to the great folks at android-hilfe.de who compiled the links and most importantly the talented people at huafans.cn who created it.
This is NOT my work but I am sharing it for everyone's benefit. It helps if you can read Chinese though
Source forum: http://huafans.cn/forum-323-1.html
Recovery link on android-hilfe: http://www.android-hilfe.de/root-cu...diapad-x1/601335-cwm-mediapadx1-download.html
Instructions:
Download and unzip the file recovery_cn.img.zip
Place the recovery_cn.img onto the root folder of your SDcard
Install Flashify from the Playstore
Run Flashify and tell it to flash Recovery image > Choose a file > navigate via the file manager and choose the img file.
Execute, and reboot to Recovery to enjoy your new recovery.
A brief translation
Main Menu:
1. Reboot Device
2. Choose ZIP to flash
3. Clear Data/Factory Reset
4. Clear Cache
5. Backup / Restore
6. Microsd functions
7. Advanced Functions
2. Choose ZIP to flash
a. Choose file from /sdcard (ie internal)
b. Choose file from /storage/sdcard1 (ie external)
c. Choose from last used location
d. Enable ADB Sideload (!!!!!!!!!)
e. Do not use signature verification
f. Back to previous menu
3. Clear Data/Factory Reset
a. No
b. Yes - clear all user data
c. Back to previous menu
4. Clear Cache
a. No
b. Yes - clear cache
c. Back to previous menu
5. Backup / Restore:
a. Backup to /sdcard (ie internal)
b. Choose from /sdcard which backup you would like to restore
c. Delete backups from /sdcard
d. Choose from /sdcard using advanced options
e. Backup to /storage/sdcard1 (ie external)
f. Choose from /storage/sdcard1 which backup you would like to restore
g. Delete backups from /storage/sdcard1
h. Choose from /storage/sdcard using advanced options
i. Released unused space from backup (not sure what this does)
j. Choose default backup format (tar, gzip etc)
6. Microsd functions - I am not sure what this does, it lists a bunch of locations
7. Advanced Functions
a. Reboot into Recovery
b. Reboot into Bootloader
c. Shutdown device
d. Clear Dalvik Cache
e. Report Errors
f. Zipalign ????
g. Don't know what this is
If anyone else can help, this will be great.
Click to expand...
Click to collapse
joytest said:
Hi everyone,
I successfully flashed CWM 6.0.4.7 on my 501L X1. This is thanks to the great folks at android-hilfe.de who compiled the links and most importantly the talented people at huafans.cn who created it.
This is NOT my work but I am sharing it for everyone's benefit. It helps if you can read Chinese though
Source forum: http://huafans.cn/forum-323-1.html
Recovery link on android-hilfe: http://www.android-hilfe.de/root-cu...diapad-x1/601335-cwm-mediapadx1-download.html
Instructions:
Download and unzip the file recovery_cn.img.zip
Place the recovery_cn.img onto the root folder of your SDcard
Install Flashify from the Playstore
Run Flashify and tell it to flash Recovery image > Choose a file > navigate via the file manager and choose the img file.
Execute, and reboot to Recovery to enjoy your new recovery.
A brief translation
Main Menu:
1. Reboot Device
2. Choose ZIP to flash
3. Clear Data/Factory Reset
4. Clear Cache
5. Backup / Restore
6. Microsd functions
7. Advanced Functions
2. Choose ZIP to flash
a. Choose file from /sdcard (ie internal)
b. Choose file from /storage/sdcard1 (ie external)
c. Choose from last used location
d. Enable ADB Sideload (!!!!!!!!!)
e. Do not use signature verification
f. Back to previous menu
3. Clear Data/Factory Reset
a. No
b. Yes - clear all user data
c. Back to previous menu
4. Clear Cache
a. No
b. Yes - clear cache
c. Back to previous menu
5. Backup / Restore:
a. Backup to /sdcard (ie internal)
b. Choose from /sdcard which backup you would like to restore
c. Delete backups from /sdcard
d. Choose from /sdcard using advanced options
e. Backup to /storage/sdcard1 (ie external)
f. Choose from /storage/sdcard1 which backup you would like to restore
g. Delete backups from /storage/sdcard1
h. Choose from /storage/sdcard using advanced options
i. Released unused space from backup (not sure what this does)
j. Choose default backup format (tar, gzip etc)
6. Microsd functions - I am not sure what this does, it lists a bunch of locations
7. Advanced Functions
a. Reboot into Recovery
b. Reboot into Bootloader
c. Shutdown device
d. Clear Dalvik Cache
e. Report Errors
f. Zipalign ????
g. Don't know what this is
If anyone else can help, this will be great.
Click to expand...
Click to collapse
Possibly a daft question but will this work on the 7D-503L (the Chinese model)?
DrHRH said:
Possibly a daft question but will this work on the 7D-503L (the Chinese model)?
Click to expand...
Click to collapse
You're from Malaysia as well right?
Anyway, this came from the Chinese huafans forum, so it should work with the 503L, and even the 501u. If you can read Chinese, you may check it out.
didn't work with my 501u on the tw 4.4.2 firmware,
jaiong said:
didn't work with my 501u on the tw 4.4.2 firmware,
Click to expand...
Click to collapse
Mine was still on B003 4.2.2. I installed with no problems via the Flashify app.
5 backup and restore
joytest said:
Mine was still on B003 4.2.2. I installed with no problems via the Flashify app.
Click to expand...
Click to collapse
Dear Sir,
So far I did not try installing the Chinese recovery. I would like to do a full back-up BUT I don't see in your translation how to go "Back to previous menu" in Chapter 5 to reboot device.
Any suggestion, and did you try to back-up yours?
Kindly yours from an old man:angel:
bvannier said:
Dear Sir,
So far I did not try installing the Chinese recovery. I would like to do a full back-up BUT I don't see in your translation how to go "Back to previous menu" in Chapter 5 to reboot device.
Any suggestion, and did you try to back-up yours?
Kindly yours from an old man:angel:
Click to expand...
Click to collapse
Sorry missed that.
The last option showing
+++++ 返回上一级+++++
means "back to previous"
This is in the last line of every chapter
Yes I did successful backup. Will try restore sometime tonight.
Sent from my SM-N9005 using Tapatalk
No boot recovery...
I did step after step exactly what you did, but it doesn't reboot in Chinese recovery.
Download recovery_cn.img, put it in My internal SD, then flash with Flashify then try to boot with Flashify menu.
I stay with The Huawei Logo on for 1 or 2 minutes then boot normally.
The only difference is that you flash recovery from 4.22 and I did from Kitkat Maj 102
Kindly yours from an old man:angel:
joytest said:
Sorry missed that.
The last option showing
+++++ 返回上一级+++++
means "back to previous"
This is in the last line of every chapter
Yes I did successful backup. Will try restore sometime tonight.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
bvannier said:
I did step after step exactly what you did, but it doesn't reboot in Chinese recovery.
Download recovery_cn.img, put it in My internal SD, then flash with Flashify then try to boot with Flashify menu.
I stay with The Huawei Logo on for 1 or 2 minutes then boot normally.
The only difference is that you flash recovery from 4.22 and I did from Kitkat Maj 102
Kindly yours from an old man:angel:
Click to expand...
Click to collapse
Hi bvannier,
In Flashify, there is an option to reboot to Recovery directly.
On the top right of Flashify, click the 3 squares menu.
It will show you options for
Reboot
Reboot recovery <== click this
Reboot bootloader
Settings
Premium details
Usage Statistics
Share this app.
Reboot recovery
Think you but it's what I did already. I flash again the recovery file with Flashify but still no luck, no recovery menu on start up when clicking on Reboot recovery option.
Kindly yours from an old man:angel:
joytest said:
Hi bvannier,
In Flashify, there is an option to reboot to Recovery directly.
On the top right of Flashify, click the 3 squares menu.
It will show you options for
Reboot
Reboot recovery <== click this
Reboot bootloader
Settings
Premium details
Usage Statistics
Share this app.
Click to expand...
Click to collapse
bvannier said:
Think you but it's what I did already. I flash again the recovery file with Flashify but still no luck, no recovery menu on start up when clicking on Reboot recovery option.
Kindly yours from an old man:angel:
Click to expand...
Click to collapse
I'm not sure why it won't work for you, as @zertux in the other thread could do it, and so have several others in my home forum.
At worst, try the Vol Up + Power combo after you have shut down.
However, make sure you are PLUGGED IN VIA USB TO A PC. For some strange reason, getting to Recovery and Fastboot modes on this device needs you to have your device connected to a PC.
Stock recovery
joytest said:
I'm not sure why it won't work for you, as @zertux in the other thread could do it, and so have several others in my home forum.
At worst, try the Vol Up + Power combo after you have shut down.
However, make sure you are PLUGGED IN VIA USB TO A PC. For some strange reason, getting to Recovery and Fastboot modes on this device needs you to have your device connected to a PC.
Click to expand...
Click to collapse
Dear sir,
Back to you this morning, and I might need your advice/help because Vol Up + Power combo after you have shut down does NOTHING!
Did you, by any chance, backup the original previous Stock Recovery in Flashify?
If yes, would you be kind enough to send it to me?
That would be fair!
Kindly yours from an old man:angel:
bvannier said:
Dear sir,
Back to you this morning, and I might need your advice/help because Vol Up + Power combo after you have shut down does NOTHING!
Did you, by any chance, backup the original previous Stock Recovery in Flashify?
If yes, would you be kind enough to send it to me?
That would be fair!
Kindly yours from an old man:angel:
Click to expand...
Click to collapse
Bonjour.
I'm at work now, let me transfer via dropbox or gdrive in evening.
My timezone is GMT +8
Hi all try this dropox link. This is stock recovery from Western Europe B003 ROM.
https://www.dropbox.com/s/k018o3cfpkn6eds/recovery.img?dl=0
Sent from my Mediapad X1 7D-501L using Tapatalk HD
THINK YOU
joytest said:
Hi all try this dropox link. This is stock recovery from Western Europe B003 ROM.
https://www.dropbox.com/s/k018o3cfpkn6eds/recovery.img?dl=0
Sent from my Mediapad X1 7D-501L using Tapatalk HD
Click to expand...
Click to collapse
As I am running kitkat B102, is it safe to flash this recovery from B003 ROM?
Kindly yours from an old man:angel:
CWM Recovery loop
Hi!
I have Mediapad X1 7d-501u and I successfully change stock recovery with this CWM v6.0.4.7. But now I have problem, because I cannot start Android, there is loop, so when I turn on device it goes into CWM Recovery. How is this possible? Thank you for all suggestions.
Jozef
I might help you
jozefhalaga said:
Hi!
I have Mediapad X1 7d-501u and I successfully change stock recovery with this CWM v6.0.4.7. But now I have problem, because I cannot start Android, there is loop, so when I turn on device it goes into CWM Recovery. How is this possible? Thank you for all suggestions.
Jozef
Click to expand...
Click to collapse
Dear sir,
If you still have this loop problem, if you can boot in bootloader there is a way to get back to your original recovery and then start Android like it was before.
Kindly yours from an old man:angel:
Here are the great advices from fellows that help me to get back to my original recovery
First : download and install "Huawei update extractor"
Second : download and install on your desktop : android-sdk-windows-1.6_r1 (Google is your friend)
Third : open your previous update.app with "Huawei update extractor" then extract previous recovery.img and copy it into Tools folder from "android-sdk-windows-1.6_r1"
Fourth : hold shift and right clic on fastboot folder for open a command
type fastboot flash recovery recovery.img (you can paste in fastboot cmd window with right click)
click enter and VOILA
From Joytest :
you can extract the recovery.img from an update.app with the "Huawei update extractor" search on google.
ive the same issue i extract the recovery from YOUR ORIGINAL ROM and flash with fastboot (flashify dont work) and all its done
the fastboot command is: fastboot flash recovery recovery.img
From Bypass83
put the recovery.img inside the fastboot folder
hold shift and right clic on fastboot folder for open a command
type fastboot flash recovery recovery.img (you can paste in fastboot cmd window with right click)
click enter and fastboot wait for your device
put your phone in fastboot mode holding up and power (or down and power ) for 5sec
it enter in fastboot mod now you can connect to your computer
fastboot must automaticaly begin flashing .
don't worry if you find its quick its normal
have a good trie
Thinks to Benny888 for images
HOPE IT WILL HELP like They did for me
Solved
to bvannier:
YOU SAVED THE DAY!!!
Thank you your suggestion works. When I tried to install ROM by CWM, there was error message "E:footer is wrong". I tried all ROMs I found (for 7D-501u). But with original recovery I was able to install the ROM and it works now.
Thank you!
Jozef
@bvannier you have nicely summarised the steps to recover from a faulty recovery. I would like to post this to Lowyat page 1 with your permission.