there`s a z ultra which is not mine
i wanted to disable its soft key,
it was unlouck bootloader and root on buil 136
i used this app:
http://forum.xda-developers.com/showthread.php?t=2270198
i used it a bit,then i replaced original builed prop which i had copied befor withe the new one after using this app and then i rebooted the phone but it stayed on boot, i went to recovery and did 3 wipes but no result and then i went to somewhere in recovery and did format system,but now my phone stayed on ''sony'' and i don`t know what should i do.the phone dont power off and dont pass the boot
please help me
this phone is not mine
pleaaaase
You were on the right track there for a minute. A wipe wouldn't do anything, since it couldn't know that the build.prop you put back wasn't the original one. A re-flash of the ROM would've fixed it (without wiping).
- Press and hold POWER + VOL UP until you feel three vibrations. It's now off. Power it on again and see if it goes any further than the Sony logo. If not, power it off again.
- Power it on and check if Recovery or TWRP are still there. If they are, great. Restore or re-flash the ROM if you're on a custom ROM.
- If Recovery is not there, flash a boot.img that has recovery and restore/re-flash ROM
thank you sir
your answer gaves me a hope...thanks very mush
i did what you said,after first power off and on it couldn`t go further than sony logo.
after that i reach cwm v6.0.4.4
when i want to reboot system from recovery it says:
root access is missing,root device? ''no'' or '' yes-root device (/system/xbin/su) ''
my rom was original and had updated by ota
and i dont have nandroid backup
what would i do now?
again thanks and thanks
Well, you're able to access recovery, so you'll have to re-flash a ROM. I believe you can transfer a ROM to your SD card while in recovery, but I'm not sure. Or just put your SD card into your computer, transfer a ROM to it and flash.
Go to the development section and download a ROM like Dogg ROM or something and just flash it. They are pre-rooted and everything so just flash and you'll be done.
Sent from my C6806_GPe using Tapatalk
I believe you can transfer a ROM to your SD card while in recovery, but I'm not sure.
Click to expand...
Click to collapse
Yes, by ADB
Related
I'm willing to DONATE and PAY for your time - to anyone that can put together a comprehensive set of information to assist me.
I have An At&t Galaxy Note with the 4.03 I717 UCLD3 version loaded on it. I have been toying around with rooting it, and trying to load custom roms, my head is spinning with all the posts.
I'm new, and like many people I have issues when I read the posts on this forum as there is no complete guide to load a new Root, find, and load a new ROM.
When the latest ICS was released a few weeks ago, I went to upgrade and my note will not upgrade with Kies since the counter has been tripped and it has the UCLD3 version on it.
Does anyone have the best ROM to load on the note, or can you explain in clear instructions how to get it back to 100% Stock so I can upgrade with At&t ( I'd rather not this approach, I'd love to get the junky At&t stuff off )
What I'm looking for:
1. A complete guide to root, and load a ROM that has everything the stock phone has, without the At&t bloatware ( IE: 4G, Spen support, compatible with samsung apps, keyboard etc.. )
2. A guide to bring the phone and counter back to 100% stock, so that it can be upgraded by Kies if no one can provide #1 above.
Thanks - I appreciate the help.
1. Get cwm HERE the Odin version.
2.once downloaded right click Odin and run as administrator, then click on the PDA slot and load the .tar you just got
(I'm sorry i don't have s link for Odin, shouldn't be too hard to find)
3 put phone in download mode by powering off, then holding volume down and power, then when prompted volume up.
4.connect to usb that's on a usb port in the back of the pc, no front ports or hubs.
5.when you get a yellow box with a :com: number in Odin hit start.
6a.(optional).no need to root first the Rom is rooted, only reason to root first is if you want to use titanium backup to save your apps and their settings.
For root, you'll need to find the su zip that's floating around and flash that in recovery first.
6b.(also optional)boot into recovery by holding all three buttons, both volume and power, then when you feel a vibrant let go of just the power button, go to backup and restore, abs make a nandroid backup of you're current set up.
7.go here for flappjaxxx latest stock based build.
Put that on your phone someplace you can get to without a bunch of navigating. Internal or external doesn't matter.
8.boot into recovery, go to wipe data/factory reset, then wipe cache.
9.go to install zip for sdcard, now if you put the Rom on external the top option "from sdcard" is what you want. If internal the one on bottom that says "from internal sdcard" navigate to where you saved it, then confirm the flash.
Once done, boot into your new Rom and enjoy,
Not completely complete, but your welcome.
No donation needed, but i won't refund it if you were to feel the need lol
Agreed. I switched to twrp but cwm recovery is more user friendly/common
Pm me if you have any?s
ok 1st u will need to download this Root/CWM/ODIN
you will 1st need to put your phone into downlaod mode: power off phone - HOLD VOL DOWN + POWER, once you get the screen that shows Press VOL UP to get to download Mode, (make sure you have the Samsung USB Drivers installed) plug in USB, you will see the COM port in yellow (it does not matter which port number) then click on PDA and navigate to the cwm-touch-i717-120409.tar.md5 and click on start, you will reboot and you have CWM installed that is used to install roms and other stuff (to get in to CWM when device is powered off HOLD VOL UP + DOWN and press the POWER until u feel the 1st vibrate, once you see the 1st Samsung logo, u can let go), then flash Flash Counter Reset through CWM (this will reset your count in ODIN so it will not void warranty. I then use TWRP Recovery Instead of CWM i like the GUI better, just flash with CWM.
ROMS: no as for roms i love Hybrid roms, which makes it a tablet and Phone, i love Paranoid Android you can download here in either ICS or JB, these are already rooted so no need to do all then.
Instructions on Installing ROMS:
1. once you download the roms, move to External SD
2. make a back up with CWM or TWRP, just click on back up and u r done. on TWRP make sure to click on all boxes.
3. Once backed up u will want to do a factory reset, wipe dalvic Cache (in cwm it is under advanced) and wipe cache partition. (some roms will have different instructions but mainly the same)
4. once you r done flashing the rom. reboot and u r done
To Go back to stock you will go here: STOCK ROMS for i717 just download the one u want and you just flash it through ODIN, but if you have CWM or TWRP there is really no need for #2.
Need some help here...
I flash the cwm using odin but then it restarts the phone right after. Then I turn the phone off and go into recovery and I still see the stock recovery.
What am I doing wrong?
BTW the flash count is also going up each time I do it.
Young Cardiac said:
Need some help here...
I flash the cwm using odin but then it restarts the phone right after. Then I turn the phone off and go into recovery and I still see the stock recovery.
What am I doing wrong?
BTW the flash count is also going up each time I do it.
Click to expand...
Click to collapse
Start reading on 2nd page http://forum.xda-developers.com/showthread.php?t=1766181
or here: http://forum.xda-developers.com/showthread.php?t=1775263
edit: Forgot to say you should really have searched or started a new thread then to hijack a thread that has nothing to do with your issue.
Agoattamer said:
Start reading on 2nd page http://forum.xda-developers.com/showthread.php?t=1766181
or here: http://forum.xda-developers.com/sho...se might face the same issue along the way...
Click to expand...
Click to collapse
Hi guys,
Yesterday I finally got to instal a new ROM onto my phone. I've done this before so my phone was already rooted and had the bootloader unlocked. I decided t ogo with Cyanogenmod10. My build was 4.1.B.0.587. I used the tutorial on cyanogenmod wiki and done everything as was said, step by step. I wasn't sure if ClockworkMod would be installed with the rom, so I donwload x-tools and isntalled it form there. Once thaat was done I proceeded to installiion. Everything went fine up until getting into CWM. I am now stuck in a boot loop, constaltly showing the xpera free project logo, then the screen goes dark and this all over and over again. So I searched the net and forums, but couldn't find any one with this problem. Most people either get into CWM and from there can't get further, or they turned the phone on adn after using some application theirs system crashes, but nobody seems to have problems with CWM. I can't get anywhere from here and have no idea what to do. If somebody could please help me, I would be very gratefull! Thanks
John
jan019 said:
Hi guys,
Yesterday I finally got to instal a new ROM onto my phone. I've done this before so my phone was already rooted and had the bootloader unlocked. I decided t ogo with Cyanogenmod10. My build was 4.1.B.0.587. I used the tutorial on cyanogenmod wiki and done everything as was said, step by step. I wasn't sure if ClockworkMod would be installed with the rom, so I donwload x-tools and isntalled it form there. Once thaat was done I proceeded to installiion. Everything went fine up until getting into CWM. I am now stuck in a boot loop, constaltly showing the xpera free project logo, then the screen goes dark and this all over and over again. So I searched the net and forums, but couldn't find any one with this problem. Most people either get into CWM and from there can't get further, or they turned the phone on adn after using some application theirs system crashes, but nobody seems to have problems with CWM. I can't get anywhere from here and have no idea what to do. If somebody could please help me, I would be very gratefull! Thanks
John
Click to expand...
Click to collapse
Hmmm...CWM is already available as built-in inside the custom kernel...no need to install recovery using x-tools anymore...just flash the kernel (boot.img) using flashtool...
iPusak Gaoq™ said:
Hmmm...CWM is already available as built-in inside the custom kernel...no need to install recovery using x-tools anymore...just flash the kernel (boot.img) using flashtool...
Click to expand...
Click to collapse
I tried that. I opened flashtool, connected my hpone in fastboot mode, selcted fastboot mode, selcted teh kernel, everytrhign went fine without errors. I then disconected the phone, turned it on and once I reached the logo I kept pressing the volume down button, but it does nothign and keeps looping...
jan019 said:
I tried that. I opened flashtool, connected my hpone in fastboot mode, selcted fastboot mode, selcted teh kernel, everytrhign went fine without errors. I then disconected the phone, turned it on and once I reached the logo I kept pressing the volume down button, but it does nothign and keeps looping...
Click to expand...
Click to collapse
you have to wait until the LED appears then you can press volume down (you can also try volume up or power button) to enter recovery....but i suggest you flash stock rom back first and make sure that your phone can boot fine...then flash custom kernel and flash CM10 in recovery...
iPusak Gaoq™ said:
you have to wait until the LED appears then you can press volume down (you can also try volume up or power button) to enter recovery....but i suggest you flash stock rom back first and make sure that your phone can boot fine...then flash custom kernel and flash CM10 in recovery...
Click to expand...
Click to collapse
Okay so I flashed back to stock kernel and now i can boot into CWM and even a normal compelte boot. I'll ttry flashing CW again
jan019 said:
Okay so I flashed back to stock kernel and now i can boot into CWM and even a normal compelte boot. I'll ttry flashing CW again
Click to expand...
Click to collapse
Hmmm...i said flash stock ROM not stock kernel...if you phone boot fine using stock kernel then you flash fxp kernel (custom kernel) and boot into CWM...no need to flash CWM separately cause CWM is already inside custom kernel...
iPusak Gaoq™ said:
Hmmm...i said flash stock ROM not stock kernel...if you phone boot fine using stock kernel then you flash fxp kernel (custom kernel) and boot into CWM...no need to flash CWM separately cause CWM is already inside custom kernel...
Click to expand...
Click to collapse
Okay, I'll give it a shot and come back with how I did.
jan019 said:
Okay, I'll give it a shot and come back with how I did.
Click to expand...
Click to collapse
WTF... So I charged my phone first so I reach the recommended 85%... Meanwhile I redownloaded the CM10 if it wasn't a bad downnload or something, from the original website. Once that was done, I turned my phone off, turned flashtool on a connected my phone in fastboot mode. I then flashed the kernel with boot.img from CM, unplugged and turned the phone off, waitign for the logo, pressed the volume down button many times and ntohing. I tried multiple times, different buttons too. Still the same. What can I be doing wrong?
jan019 said:
WTF... So I charged my phone first so I reach the recommended 85%... Meanwhile I redownloaded the CM10 if it wasn't a bad downnload or something, from the original website. Once that was done, I turned my phone off, turned flashtool on a connected my phone in fastboot mode. I then flashed the kernel with boot.img from CM, unplugged and turned the phone off, waitign for the logo, pressed the volume down button many times and ntohing. I tried multiple times, different buttons too. Still the same. What can I be doing wrong?
Click to expand...
Click to collapse
When I have the phone flashed with stock kernel I can get into the CMW recovery. Trying to install CM with the stock kernel is i guess not a good idea right?
EDIT: So I tried downloading CW9 if that wouldn't make a difference, but it's the same story. Once I boot the phone it just keeps looping from the logo to black screen, no LED lights up, nothing. What if I did a factory reset either from CWM or in the normally booted? Could that help in anyway?
jan019 said:
When I have the phone flashed with stock kernel I can get into the CMW recovery. Trying to install CM with the stock kernel is i guess not a good idea right?
EDIT: So I tried downloading CW9 if that wouldn't make a difference, but it's the same story. Once I boot the phone it just keeps looping from the logo to black screen, no LED lights up, nothing. What if I did a factory reset either from CWM or in the normally booted? Could that help in anyway?
Click to expand...
Click to collapse
Hmmmm...how many times did i have to tell you, you need to FLASH STOCK ROM first...stock rom has stock kernel inside it...flashing STOCK rom will factory reset your phone...it should make your phone like new...after your phone boot normally then you can flash custom kernel (fxp kernel) and boot into recovery using that kernel...then only then you can flash CM10 into your phone....
jan019 said:
Hi guys,
Yesterday I finally got to instal a new ROM onto my phone. I've done this before so my phone was already rooted and had the bootloader unlocked. I decided t ogo with Cyanogenmod10. My build was 4.1.B.0.587. I used the tutorial on cyanogenmod wiki and done everything as was said, step by step. I wasn't sure if ClockworkMod would be installed with the rom, so I donwload x-tools and isntalled it form there. Once thaat was done I proceeded to installiion. Everything went fine up until getting into CWM. I am now stuck in a boot loop, constaltly showing the xpera free project logo, then the screen goes dark and this all over and over again. So I searched the net and forums, but couldn't find any one with this problem. Most people either get into CWM and from there can't get further, or they turned the phone on adn after using some application theirs system crashes, but nobody seems to have problems with CWM. I can't get anywhere from here and have no idea what to do. If somebody could please help me, I would be very gratefull! Thanks
John
Click to expand...
Click to collapse
probably bcuz u used CWM located in phone storage & deleted it. happens.
to shorten here all, i advice u to use allways kernels (built in) recovery. (forget about xparts its onlx for locked bl ppl)
also if u want to go for a cm (10+) build try LX from here bcuz FXP is NO longer supported! they kleave us. also its very outdated/old/bad
if u flash (any) kernel CWM is inbuilt, so just reflash the kernel using fastboot (cmd commands) , then on power on press the vol up button moretimes!! to enter CWM (must work) i really advice u to use some LX build. (dont forget to wipe partitions bfore flash)
bejunk said:
probably bcuz u used CWM located in phone storage & deleted it. happens.
to shorten here all, i advice u to use allways kernels (built in) recovery. (forget about xparts its onlx for locked bl ppl)
also if u want to go for a cm (10+) build try LX from here bcuz FXP is NO longer supported! they kleave us. also its very outdated/old/bad
if u flash (any) kernel CWM is inbuilt, so just reflash the kernel using fastboot (cmd commands) , then on power on press the vol up button moretimes!! to enter CWM (must work) i really advice u to use some LX build. (dont forget to wipe partitions bfore flash)
Click to expand...
Click to collapse
Okay guys, I'm really confused right now. I just couldn't manage to boot into CWM with CM, I tried many versions, none worked. I then applied the exact same steps onto LX and it worked perfectly, I was in CWM after pressing the volume down butto na few times. Now it's been almost a month since I did this and I wanted to change to a differet version again, so I wanted to try CM again, but it's the same thing, I can't get to CWM. Any ideas?
Thanks
I followed this video to install Cyanogenmod. https://www.youtube.com/watch?v=AQdSOTdV06Q
during the install I got a red error stating there was some problem with the gapps zip. Now my phone gives a quick samsung flash and nothing else happens. If I hold power,home and volume up I can still get into the cyanogenmod screen with the option to install.
I downloaded the files again and tried installing. It got as far as flashing file 1 of 2 and the working bar keeps spinning and doesn't make anymore progress. The screen eventually went black and now I cant even get into the recovery screen. The screen flashed the samsung logo with small blue writing in the top left and then goes black again.
Please help...
Update - If I hold power, volume down and home I am able to get into the downloading screen.
Try to reflash cyanogen mod again but before that format you device completely by going to recovery mod!
Or try to download the cyanogen mod and gapps from xda thread or from somewhere else!
Before flashing any ROM, it is strongly recommended to completely format your device!
Hope it will help you
skiiermike said:
I followed this video to install Cyanogenmod. https://www.youtube.com/watch?v=AQdSOTdV06Q
during the install I got a red error stating there was some problem with the gapps zip. Now my phone gives a quick samsung flash and nothing else happens. If I hold power,home and volume up I can still get into the cyanogenmod screen with the option to install.
I downloaded the files again and tried installing. It got as far as flashing file 1 of 2 and the working bar keeps spinning and doesn't make anymore progress. The screen eventually went black and now I cant even get into the recovery screen. The screen flashed the samsung logo with small blue writing in the top left and then goes black again.
Please help...
Update - If I hold power, volume down and home I am able to get into the downloading screen.
Click to expand...
Click to collapse
Since you can get into download mode and not into the recovery I would try to flash back to stock following the info in the sticky.
Thanks to the both of you for the help.
FireBlazeGT said:
Try to reflash cyanogen mod again but before that format you device completely by going to recovery mod!
Or try to download the cyanogen mod and gapps from xda thread or from somewhere else!
Before flashing any ROM, it is strongly recommended to completely format your device!
Hope it will help you
Click to expand...
Click to collapse
Thanks but I can't get into the recovery screen, only the download screen.
Darke5tShad0w said:
Since you can get into download mode and not into the recovery I would try to flash back to stock following the info in the sticky.
Click to expand...
Click to collapse
I found this but it is very vague
IF YOUR PHONE MATCHES OPTION 1 LOOK HERE!!
A soft brick is easily fixed in most cases, here is what you can do to fix your phone!
-Boot into Recovery (Vol Up + Home Button + Power Button) and wipe your data/cache/delvik cache and factory reset and start all over.
-If Recovery fails, try booting into Download Mode (Vol Down + Home Button + Power Button) and use Odin to get into stock firmware and start again.
(if youre using a Mac, Linux or Ubuntu Heimdall can be used to flash stock firmware)
-Also make sure the downloaded ROM/GApps are not corrupt when youre flashing. You can do this by checking the MD5.
-If youre getting a "STATUS 7" error, please update your recovery, or update your bootloader.
I also found this one that I will try an follow.
http://forum.xda-developers.com/showthread.php?t=2549068
To confuse things a little, this phone is a telus phone that I had unlocked to use on Bell. I assume I reflash the telus firmware, am I correct?
Bro just download your phone's custum recovery .
Now go to Odin mod in your phone volume down,home,power.then select volume up.now connect your phone in to PC.
Now open Odin select PDA then browse custum recovery. And start button click.
I was able to get my original firmware back with odin.
Can someone link me to the current files for my phone so I don't screw this up again? Its a Telus i747m, which I believe falls under AT&T.
Thanks
skiiermike said:
I was able to get my original firmware back with odin.
Can someone link me to the current files for my phone so I don't screw this up again? Its a Telus i747m, which I believe falls under AT&T.
Thanks
Click to expand...
Click to collapse
Bro go to this site:http://www.sammobile.com/firmwares/
Then create free account select your phone model and download latest firmware.
Then flash via Odin.
Best of luck.
I want to say thanks for all the replies.
I was able to sort out my problem and here is the solution.
I was trying to install the zip files from the micro sd and it was failing every time. I then tried the same sd card in a usb-otg cable and it worked perfectly.
It must have something to do with the built in sd reader.
I have a rooted Xperia Z ultra, I bought this phone off craigslist (traded my note 3) he said it's rooted which it is. He put the GPE 4.4.4 rom (scrubber port) it has the recovery menu etc. The GPe zip sits on my phone internal. Can I download roms straight from my phone and run them? You know like down [email protected] rom to your phone enter recovery and boot the zip up?
*Dev or xperienced person please answer*
Can I leave my recovery zips on xternL SD and use them if I get stuck or do they have to be on the internal?
RealityFails said:
I have a rooted Xperia Z ultra, I bought this phone off craigslist (traded my note 3) he said it's rooted which it is. He put the GPE 4.4.4 rom (scrubber port) it has the recovery menu etc. The GPe zip sits on my phone internal. Can I download roms straight from my phone and run them? You know like down [email protected] rom to your phone enter recovery and boot the zip up?
*Dev or xperienced person please answer*
Can I leave my recovery zips on xternL SD and use them if I get stuck or do they have to be on the internal?
Click to expand...
Click to collapse
Recovery should work ok on the external, but will be slow to back up and restore.
It will depend on what recovery they installed, but flashing a ROM straight off the phone should work if the bootloader is unlocked.
Did they say the BL was unlocked? did they give you a TA backup? What kernel is on it? What recoveries are there and how were they installed?
You may not be able to answer these
Did a check with *#service etc and it says it's unlocked. He didn't give me a TA backup? But I notice when I reformat the phone my data doesn't get deleted.
And wait so the scrubber zip on my phone that's not a recovery? Just copy of the rom?
RealityFails said:
And wait so the scrubber zip on my phone that's not a recovery? Just copy of the rom?
Click to expand...
Click to collapse
Scrubber did not include a kernel and recovery in the port zip file I don't think, so any recovery would have been installed separately. Does it reboot into a recovery, or will it enter one if you hit the vol. + or - key when the LED comes on during boot?
Are you talking about this menu? Because my phone does have this.
The twrp folder comes back even if I delete it, I guess to sum up I want my phone to have a recovery if I mess up, as well the ability to switch different roms
RealityFails said:
Are you talking about this menu? Because my phone does have this.
Click to expand...
Click to collapse
Yeah. Does it have CWM as well (vol + when booting). Most custom ROMs use CWM as it is what is in CM11, so just take note that if you use TWRP you may have to flash another kernel/recovery to use your backups. This isn't a huge issue once you know how to flash and or hotboot a boot.img.
There are a couple or ROMs that have issues being flashed from one recovery or the other.
Hello guys. I am guessing that i am having problem with cwm. I followed tutorial on xda forum how to root i8552 with odin, i did all the same as says in tutorial. But when i am trying to go to cwm, with volume+power+home button, screen is blinking but cant load cwm.
I cant even enter in . Anyone got stock recovery for my phone? If i can flash that stock recovery from odin i will be thankfull.
wlada96 said:
Hello guys. I am guessing that i am having problem with cwm. I followed tutorial on xda forum how to root i8552 with odin, i did all the same as says in tutorial. But when i am trying to go to cwm, with volume+power+home button, screen is blinking but cant load cwm.
I cant even enter in . Anyone got stock recovery for my phone? If i can flash that stock recovery from odin i will be thankfull.
Click to expand...
Click to collapse
http://d-h.st/hcA
http://forum.xda-developers.com/showthread.php?t=2494471
Ty for reply. I followed same instructions as on that link, and i cant load cwm or stock recovery. I flesh recovery, but cant enter in...
I followed every single step.
Flash CWM again
wlada96 said:
Ty for reply. I followed same instructions as on that link, and i cant load cwm or stock recovery. I flesh recovery, but cant enter in...
I followed every single step.
Click to expand...
Click to collapse
Flash CWM with odin. Now, when the phone restarts remove the battery before it boots. Now, insert the battery after approximately a minute or so then try to enter recovery mode by using, Vol up + Power button + Home button. As soon as phone vibrates leave power button. Wait till it shows Samsung Galaxy Quattro. and then leave other two buttons too. It should boot into cwm.
At last if nothing works, do a dirty Flash stock Rom via Odin and repeat the cwm flashing process. :fingers-crossed:
mysteryno46 said:
Flash CWM with odin. Now, when the phone restarts remove the battery before it boots. Now, insert the battery after approximately a minute or so then try to enter recovery mode by using, Vol up + Power button + Home button. As soon as phone vibrates leave power button. Wait till it shows Samsung Galaxy Quattro. and then leave other two buttons too. It should boot into cwm.
At last if nothing works, do a dirty Flash stock Rom via Odin and repeat the cwm flashing process. :fingers-crossed:
Click to expand...
Click to collapse
I did all what you maintioned with flashing cwm and using odin. Also battery was out of phone for about 2 minutes (for any case).
So can you provide me a link for that "dirty stock rom" and give me intructions how to install it?
And one more thing. When i removed battery for more then 2 minutes, then start up phone, data and time was on system default. Same as phone when i bought it and first boot it. Also idk why, but my phone dont have sduos mark on top of screen, and has 1.6gb of internal memory. So maybe this will be helpfull.
Similar Case like yours ! ! !
wlada96 said:
And one more thing. When i removed battery for more then 2 minutes, then start up phone, data and time was on system default. Same as phone when i bought it and first boot it. Also idk why, but my phone dont have sduos mark on top of screen, and has 1.6gb of internal memory. So maybe this will be helpfull.
Click to expand...
Click to collapse
Sometime back there was this guy who had almost same device as you are mentioning. You can contact and talk to him. Bcoz as per my knowledge Quattro has 5.1 User available space and Duos is written on Upper right.
http://forum.xda-developers.com/showthread.php?t=2536774
By dirty flash I mean, flashing the stock rom over the current stock rom without formatting data and all. That is called dirty flash. Clean flash means wiping all data and then flash the Rom.
Take the backup of all the data and try to do a clean flash if dirty flash doesn't work.
Flashing Stock and repeating the cwm flashing process should work if every step is done as advised.
Try your luck again. :good:
What if i flash that stock rom, and then phone failed to boot. Then i will have to enter in recovery mode, but idk if i will be able to enter in...
If you flash the stock Rom properly, it should boot.
wlada96 said:
What if i flash that stock rom, and then phone failed to boot. Then i will have to enter in recovery mode, but idk if i will be able to enter in...
Click to expand...
Click to collapse
If you know how to use odin and flash the clean stock rom, it has to boot. There is no way it won't until unless you make some mistake and the flashing fails in between. After flashing the stock rom, initial boot will take long time, you need to keep patience.
Go ahead and flash the stock rom via odin.