Hello, dear friends!
I buyed this smartphone a couple of days ago. I already have android-operatec smart, and this one is almost for experiment)
Ok, my trouble. I want unlock bootloader, used instructions, include using s1tool and MSM-7227. Have some troubles with drivers for flashmode, but MSM worked correctly. When I want to check bootloader (unlocked or not) using s1tool. And phone dont respond on all keys and combinations - power, power+back, power+home... Looks completely dead. Can anyone help me?
P.S. Factory date - 11W20, firmware - stock 2.1.
P.S. S. My suggestion - completely bricked, dead battery, bricked using not proper USB (from Nokia Lumia). Please, answer !
Update. OK, gentlemens, I'm a moron) I'm looked on a wrong numbers, and date of production of my device - 11W47. I have a brick) Its can be repaired by engeneers?
Related
I kind of brick my Xperia x10 (I know it's not called brick). I did root, install xRecovery and after that went straight away to install a new custom ROM. When I reboot the x10 just got blocked with the SE logo.
I tried SEUS, and didn't work saying that I've got the last update. I'm trying flashtool now, but my problem is, that now after 10 seconds it changes from flash mode to SE logo, and I can't do anything else...
Please, I really need help, I'm totally a noobie
This is the log from Flashtool:
11/059/2012 17:59:42 - INFO - Device connected in flash mode
11/000/2012 18:00:03 - INFO - Device disconnected
11/000/2012 18:00:03 - INFO - Device connected with USB debugging off
I took the risk to try to flash a ftf file in those 10 seconds and it DID work!!!
Bless it. So, I'm gonna try to carry on with the other guides. Anyway, if you have any advice it'll very much appreciated
Which version of flash tool have you used for this? This was a bug in on of the versions in the recent past that seems to have been fixed now.
Also, which Rom were you trying to install? (not related to your problem, just asking )
The Flashtool is ver. 0.6.7.0 running on Windows 7 64 bits.
I just installed the firmware Sony Ericsson X10i_2.1.A.435_GLOBAL-GGL GENERIC 1232-9897.
Trying to follow this guide now http://forum.xda-developers.com/showthread.php?t=928343 but it appears a camera with an arrow when I'm installing the xRecovery 0.3...
I was thinking to install the ThGo2's ROM because I read good reviews about it, especially about the battery life...
Any recommendation?
I have mostly stuck to stock-based ROMs. I haven't used ThGo2 ROM long enough to give an informed opinion. Right now I am using Wolfbreaks ROM with DoomKernel. The camera is somewhat crippled in the CM/MIUI roms but otherwise you could have a look at those also.
Hello, I bought the blu dash 4.0 smartphone, and headed to update to the official version Q203_BLU_apbp_full_20130521.zip which is located on the site blu.kiwibed.com/index.php?erro=1 and my phone not turn more, does not enter dowload mode and I can not give the factory reset. I believe that the BIOS has been damaged somehow during the upgrade process, I found some similar cases on the internet ... is there any software that can be arranged for you guys to help me fix the bootloader? There any way to fix it with others software that fixes some bootloaders MSM8255 processor? Please help me, the phone is only 3 days of use, and I find no service here in Brazil who knows any BOX (like riff and medusa) that can fix the bootloader . Thank you.
just as me
bludash4 said:
Hello, I bought the blu dash 4.0 smartphone, and headed to update to the official version Q203_BLU_apbp_full_20130521.zip which is located on the site blu.kiwibed.com/index.php?erro=1 and my phone not turn more, does not enter dowload mode and I can not give the factory reset. I believe that the BIOS has been damaged somehow during the upgrade process, I found some similar cases on the internet ... is there any software that can be arranged for you guys to help me fix the bootloader? There any way to fix it with others software that fixes some bootloaders MSM8255 processor? Please help me, the phone is only 3 days of use, and I find no service here in Brazil who knows any BOX (like riff and medusa) that can fix the bootloader . Thank you.
Click to expand...
Click to collapse
Hello my friend ! também sou brasileiro rs
I have "same problem" but my device is a Blu Studio 5.0s
after hard reset the phone is no longer turning on, and not even download mode or recovery mode
it has only one week of use :/
if you have any new, please, tell me !
This Web for its solution, but sorry Indonesian :laugh::laugh::laugh::laugh:
Hello everyone! Happy new month as we say in Greece!
I'm new to your forum (but I visit the forum way to often to find answers to some of the problems that my friends have with their android phones)
I am a iOS user since the release of the first iPhone (2G) and i still use that phone as my primary device.
Due to economical issues I never could buy a newer version of the device.
So I thought... an iPhone clone might do the trick for me!
SO I bought a used Goophone i5.
The specs that antutu gave me was that the phone had:
Quad-Core CPU (MT6589 if I'm not mistaken) --> which is a lie, because the phone in factory mode (Power + Vol down told me it was a dual core mt6577)
2GB RAM
I wanted to fresh install the ROM of the phone and I went to needrom.com to find the ROM for my phone.
I extracted the downloaded files and with SP Flashtool i followed the steps to install the ROM.
But once the green circle appeared in my PC monitor, and told me that everything was OK I ejected the phone cable and tried to power on the device.
The device doenst show ANY kind of response to anything (no dev manager port appearance or anything) and that means i cannot install another ROM or even go to recovery mode to install another rom OR even try another ROM from SP Flashtool.
I tried to locate the test point of the device but i couldn't since I've never tried that before and i am kinda scared that i will ruin my new pretty shiny iPhone clone.
Here are some images of the inside of the device (not taken by me) :
http://imagizer.imageshack.us/a/img541/2850/ebne.jpg
http://imagizer.imageshack.us/a/img132/1700/u36i.jpg
My questions are the following:
1) Can someone help me find the test point and give me step-by-step instructions on how to connect my phone again to SP Flashtool?
2) Is there a way to avoid finding the TP and just flashing a new ROM?
3) Does someone have the same problem as me out there?
4) Is there a newer ROM with ios7 looks?
Thanks to all,
hope you can all help me and then help you if needed :highfive:
The articles that I have already tried and researched are:
http://forum.xda-developers.com/showthread.php?t=2417060
http://translate.google.gr/translat...Z3x&rls=org.mozilla:en-US:official&channel=sb
http://translate.google.gr/translat...W8x&rls=org.mozilla:en-US:official&channel=sb
http://forum.china-iphone.ru/unbrick-goophone-i5-tk-6575-t29417.html
http://forum.xda-developers.com/showthread.php?t=1943442
UP please
UP . anyone?
3985993 4393
UP. Anyone?
up!
No one knows how to do this?
The things I also tried was to charge the battery from a external charger with leads and connect it to another device to see if it still works.
The battery so does work
But still cant locate the test point and cant connect the device to SP Flashtool.
Please help XDA members
i bricked my android and when i connect it to the laptop its shows "qhsusb_bulk" after some research on google i came to know that it is some kind of download mode for qualcomm devices like mine and i am stuck here cause i messed up my bootloader (cause i flashed different device's rom)
i tried every method available (there weren't much BTW) but no use
please can anyone help me with this i want my phone back....
bonny1256 said:
i bricked my android and when i connect it to the laptop its shows "qhsusb_bulk" after some research on google i came to know that it is some kind of download mode for qualcomm devices like mine and i am stuck here cause i messed up my bootloader (cause i flashed different device's rom)
i tried every method available (there weren't much BTW) but no use
please can anyone help me with this i want my phone back....
Click to expand...
Click to collapse
Please tell more about your device mate . And go search on your phone forum instead here, I'm sure there is a guide for hard brick device in your phone's forum.
For example, I've a LG G2, and well, when in qhsusb_bulk mode, it can't be recover, so don't worry now.
bonny1256 said:
i bricked my android and when i connect it to the laptop its shows "qhsusb_bulk" after some research on google i came to know that it is some kind of download mode for qualcomm devices like mine and i am stuck here cause i messed up my bootloader (cause i flashed different device's rom)
i tried every method available (there weren't much BTW) but no use
please can anyone help me with this i want my phone back....
Click to expand...
Click to collapse
Send your phone's model number and version so anyone help you
Br
Shahzaib Jahangir
As with most qualcomm devices, a bricked bootloader needs uart access to restore it (if a image is even available)
Guys im having the same issue but with a CATS50, what can i do, i have tried almost all
Update: Tried the latest Flashtool, worked like a charm.
Gues making a new thread wasn't necessary. xD
Hello everyone.
I have an Xperia X10i laying, not mine, my sister's actually and I want to use it again, the problem is that she forgot the password she set on it few years ago.
Is it possible to bypass the password via flashing? I have never owned a Sony smartphone so I have no idea how it's done.
EDIT: Did the homework, Flashtool detects my device as X10i - CB511PP34A - 1233-7025_R2C - 1227-4612_2.1.A.0.435 - WORLD-1-4-8_3.0.1.G.0.75. But would it be possible to flash a stock image on a totally stock device? (Totally stock as in locked and not rooted)
Any help is appreciated and thanks in advance.