Hello
i think i have managed to brick my phone. I have followed this http://forum.xda-developers.com/showthread.php?t=2402943 by the letter to root my phone which worked fine. Then i tried to install CWM and and since then i can't boot up. I always get "encryption unsuccessful" error message.
After googling i found that i need to unlock my bootloader but when i try to get my token i get FAILED (remote: unsupported command)
My display shows when i try to enter fastboot
AP fastboot flash mode (s)
)A.77
eMMC Info Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED Status Code :0
Battery OK
OK to program
Transfer Mode:
USB Connected
Any help please?
dosada said:
Hello
i think i have managed to brick my phone. I have followed this http://forum.xda-developers.com/showthread.php?t=2402943 by the letter to root my phone which worked fine. Then i tried to install CWM and and since then i can't boot up. I always get "encryption unsuccessful" error message.
After googling i found that i need to unlock my bootloader but when i try to get my token i get FAILED (remote: unsupported command)
My display shows when i try to enter fastboot
AP fastboot flash mode (s)
)A.77
eMMC Info Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED Status Code :0
Battery OK
OK to program
Transfer Mode:
USB Connected
Any help please?
Click to expand...
Click to collapse
Come on guys, there must be someone who can help.
I have finally managed to get the drivers installed properly on win 8.1 and rds lite recognizes the phone now. As soon as i try to flash the xml file of SPYDERIRD_U.01.6.7.3-94_SPI-328_04.11.01P_0A.74_AUSTRALIA_OPTUS_CFC_HWp2b_SIGNED.xml i get an errormessage and it stops.
Any one know what to do?
dosada said:
Come on guys, there must be someone who can help.
I have finally managed to get the drivers installed properly on win 8.1 and rds lite recognizes the phone now. As soon as i try to flash the xml file of SPYDERIRD_U.01.6.7.3-94_SPI-328_04.11.01P_0A.74_AUSTRALIA_OPTUS_CFC_HWp2b_SIGNED.xml i get an errormessage and it stops.
Any one know what to do?
Click to expand...
Click to collapse
Anyone going to help?
So far i can see the phone in rsd and when i get up to step 6 in the flashing process which means that the firmware i am trying to flash is older then the one on device.
The firmware i have downloaded is the stock optus 4.0.4 but the phone has got already 4.1.2 on it.
COuld anyone be nice enough and help a little?
dosada said:
Anyone going to help?
So far i can see the phone in rsd and when i get up to step 6 in the flashing process which means that the firmware i am trying to flash is older then the one on device.
The firmware i have downloaded is the stock optus 4.0.4 but the phone has got already 4.1.2 on it.
COuld anyone be nice enough and help a little?
Click to expand...
Click to collapse
Why did you tried to flash older firmware?
If you were on JB then you must flash JB Fastboot file.
Sent from my XT910 using xda app-developers app
welder73 said:
Why did you tried to flash older firmware?
If you were on JB then you must flash JB Fastboot file.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
BEcause i am stuck and have no idea what to do anymore. I am without a phone for a week one as my main handset is shipped in for repairs.
Which firmware can i flash over rsd lite onto my device? A link?
Thanks a lot
dosada said:
BEcause i am stuck and have no idea what to do anymore. I am without a phone for a week one as my main handset is shipped in for repairs.
Which firmware can i flash over rsd lite onto my device? A link?
Thanks a lot
Click to expand...
Click to collapse
I don't know where are you from but here http://forum.xda-developers.com/showthread.php?t=2231289 are all JB fastboot files,just find which is for your country and flash it.
Sent from my XT910 using xda app-developers app
welder73 said:
I don't know where are you from but here http://forum.xda-developers.com/showthread.php?t=2231289 are all JB fastboot files,just find which is for your country and flash it.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
I am in Australia and that seems to be the only one missing there
dosada said:
I am in Australia and that seems to be the only one missing there
Click to expand...
Click to collapse
You can flash any european fastboot file,don't worry.
Sent from my XT910 using xda app-developers app
welder73 said:
You can flash any european fastboot file,don't worry.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Hvala brate, sledeci put kad sam u BG castim pice.
dosada said:
Hvala brate, sledeci put kad sam u BG castim pice.
Click to expand...
Click to collapse
Nema na čemu!
Haha,ja gledam nik "dosada",rekoh neko naš a ti napisao Australija,pomislim,onda nije
Sorry for oftopic language
Sent from my XT910 using xda app-developers app
Related
I'am running on 4.0.4 Chinese leak and I wanna go back to 2.3 Stock, and I just simply can't. I don't know what I'm doing wrong. Nothing is working.
1. Dual Wipe
2. Flash 2.3.6 EU
3. Dual Wipe
4. Going to BP Tools - Here phone stuck on Motorola Logo with Costumer Error.
5. I've tried flash only Radio to force flashing GB radio version. Radio flashed on phone screen but after that phone still stucks on Motorola logo with error ( BP tools ofc)
I'm using Fla**** but I noticed that in bat file there's not cdt.bin flash command when I adding it I'm getting error "preflashing validation failur" Maybe this is a problem? What can couse it?
after return to the GB is very heavy, some write that almost impossible
pok5 said:
I'am running on 4.0.4 Chinese leak and I wanna go back to 2.3 Stock, and I just simply can't. I don't know what I'm doing wrong. Nothing is working.
1. Dual Wipe
2. Flash 2.3.6 EU
3. Dual Wipe
4. Going to BP Tools - Here phone stuck on Motorola Logo with Costumer Error.
5. I've tried flash only Radio to force flashing GB radio version. Radio flashed on phone screen but after that phone still stucks on Motorola logo with error ( BP tools ofc)
I'm using Fla**** but I noticed that in bat file there's not cdt.bin flash command when I adding it I'm getting error "preflashing validation failur" Maybe this is a problem? What can couse it?
Click to expand...
Click to collapse
first of all you flash ics china again
root it
then restore mmcblk1p18 by terminal or connectbot ( the codes are available )
then flash your GB rom.
it would work.
I did it once.
This is some idea are you sure it works?
I didn't do it becouse everyone said to flash GB first and after booting up GB root and restore that file. I just don't wanna stuck with nothing but if I switch this files again on chinese leak. That error message should disappear and I can flash GB, but if it disappear and my phone still stuck on "M" Im end up with "M"- brick phone... ehh
pok5 said:
This is some idea are you sure it works?
I didn't do it becouse everyone said to flash GB first and after booting up GB root and restore that file. I just don't wanna stuck with nothing but if I switch this files again on chinese leak. That error message should disappear and I can flash GB, but if it disappear and my phone still stuck on "M" Im end up with "M"- brick phone... ehh
Click to expand...
Click to collapse
This is the correct way. If you have any trouble flashing you'll be able to flash chinese ics and try downgrade as many times as needed.
Cheers
Sent from my XT910 using Tapatalk 2
Ok I think I'am brick my phone now I replaced orginal file again and flashed back 2.3.6 and of course stuck on M logo... Of course Im without Customer Error now and I can't flash chinese back... There is something I can do now?
pok5 said:
Ok I think I'am brick my phone now I replaced orginal file again and flashed back 2.3.6 and of course stuck on M logo... Of course Im without Customer Error now and I can't flash chinese back... There is something I can do now?
Click to expand...
Click to collapse
Flash the 2.3.6 T-Mobile, if there are flash failes, delete the showed lines in the xml until the flash is finished. Then install the german ICS leak with moto recovery, then you should get a full working system without root, but better than brick. And be patient a few days to the release of the official ICS, we should get fastboot files, and maybe we will get a new root method tomorrow...
dtrail1 said:
Flash the 2.3.6 T-Mobile, if there are flash failes, delete the showed lines in the xml until the flash is finished. Then install the german ICS leak with moto recovery, then you should get a full working system without root, but better than brick. And be patient a few days to the release of the official ICS, we should get fastboot files, and maybe we will get a new root method tomorrow...
Click to expand...
Click to collapse
I love you! Even T-Mobile GB is booted up and working!
pok5 said:
I love you! Even T-Mobile GB is booted up and working!
Click to expand...
Click to collapse
You got luck, man, really! Now you should be ablr to flash any other gb rom or custom roms..
Gesendet von meinem XT910 mit Tapatalk 2
pok5 said:
I love you! Even T-Mobile GB is booted up and working!
Click to expand...
Click to collapse
GB T-mobile work without ID Error and Bptools login?
bogante said:
GB T-mobile work without ID Error and Bptools login?
Click to expand...
Click to collapse
Yes it worked for me, but I don't reffer to do it becouse it could be only luck. I flashed tmobile GB with Fla**** I rewrote all command. I personally think that deleting storage data command helped to boot up GB becouse when I flashed other roms without it phone never flash radio right after flashing.
Sent from my XT910 using XDA
can someone write the exact instructions on how to restore the android 4.0 GB of Chines leak or nandroid
underface said:
can someone write the exact instructions on how to restore the android 4.0 GB of Chines leak or nandroid
Click to expand...
Click to collapse
these are the steps I've had followed
1. flash gb from your region
2. root with motofail if the 2.3.6 or zergbrush if 2.3.5
3. restore the p18 file
Code:
adb shell
su
cat /sdcard-ext/mmcblk1p18-go > /dev/block/mmcblk1p18
4. flash gb again
hint1:
1. you'll have to boot under bp tools 'till step 4.
2. rooting is hard becouse you've to reboot it several times and must enter via bp tools. I just forced starting bp tools by holding both vol buttons during the process.
Cheers
I restored my mmcblk1p18 before downgrade but would only advise this if you have sufficient battery or factory cable.
Sent from my XT910 using XDA
what is it mmcblk1p18
---------- Post added at 10:57 PM ---------- Previous post was at 10:42 PM ----------
pedrotorresfilho said:
these are the steps I've had followed
1. flash gb from your region
Click to expand...
Click to collapse
by rsd lite?
in terminal after flashing to 2.3.6 or 2.3.5?
pedrotorresfilho said:
Code:
adb shell
su
cat /sdcard-ext/mmcblk1p18-go > /dev/block/mmcblk1p18
4. flash gb again
Click to expand...
Click to collapse
pedrotorresfilho said:
hint1:
1. you'll have to boot under bp tools 'till step 4.
2. rooting is hard becouse you've to reboot it several times and must enter via bp tools. I just forced starting bp tools by holding both vol buttons during the process.
Click to expand...
Click to collapse
I do not understand this tips
underface said:
what is it mmcblk1p18
Click to expand...
Click to collapse
Its a dev razr partiton bkp folks ate restoring in regular razr to bypass region signature verification. This hack was presented to us by a chinese dev.
Cheers
Sent from my XT910 using Tapatalk 2
where i can get it
after this all operations, i can flash to my first soft and i restore warranty?
thanks for help
i'm big noob
underface said:
where i can get it
after this all operations, i can flash to my first soft and i restore warranty?
thanks for help
i'm big noob
Click to expand...
Click to collapse
Hi, this is not recommended for non experienced users, at least. You can brick your phone trying. Thanks
Sent from my XT910 using Tapatalk 2
Ok guys, I dont ask questions in here lightly, when I ask a question its only after hours of (fruitless) searching. I was invited to the soak test for the ICS update, BUT there were still traces of root on the handset so it kept failing, SO I tried the droid utility to un-root but for some reason pressed the wrong option (I know I know) and it attempted to load a version of firmware incompatible with my razr. SO I got the ap flash fail message and nothing else - a couple of hours later and about 15gb of files to flash through RSD lite, I am still no better off, I just can't find the right image, there is one that appears to install, but then it wont boot and goes instead to the ap fastboot screen boot fail.
Is my device dead? Or fixable? I have tried getting version info from the Moto website but they need the IMEI (which I have) AND a serial number which I DONT have, I have no idea why I tossed the box, nbot like me as I dont keep phones for long but for whatever reason I did.
The phone was second hand and has NO operator branding on it at all so I assume its retail, It was on 2.3.6. Please please someone tell me it's not as bad as it appears!!
if u got ap flash error.. I'm sure u just the right rom to flash via RSD lite n u should be ok.. try give some more info if u can.. like are u xt910 or xt912?
Sent from my XT910 using xda app-developers app
Mobzter said:
if u got ap flash error.. I'm sure u just the right rom to flash via RSD lite n u should be ok.. try give some more info if u can.. like are u xt910 or xt912?
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
The only details I can access are on the back of the handset - Its the XT910, I know the IMEI number but thats not relevant,
The back also says, Type: MOC2E Fcc Id IHDP56ME2 Ic Id 1090 - P56ME2,
That is all I know, the phone has no operator software installed that I ever saw so I am guessing its a sim free retail model.
I have tried every eu fastboot flash file I can find, (about a dozen of them) I'm scared the battery will run out and leave me completely stuffed!
You can only flash phone with ICS fastboot not gingerbread firmware.
There are couple ICS fastboot leaked by sbf.droid-developers.com, download ICS firmware and flash phone with RSD lite. good luck.
kent_lkc said:
You can only flash phone with ICS fastboot not gingerbread firmware.
There are couple ICS fastboot leaked by sbf.droid-developers.com, download ICS firmware and flash phone with RSD lite. good luck.
Click to expand...
Click to collapse
I have tried every british fastboot on their site and nothing will flash.
Any ideas?
Try the EU ICS Fastboot
http://forum.xda-developers.com/showthread.php?p=29242699
Sent from my CustomiZed XT910
HSD-Pilot said:
Try the EU ICS Fastboot
http://forum.xda-developers.com/showthread.php?p=29242699
Sent from my CustomiZed XT910
Click to expand...
Click to collapse
Whilst I wait the HOUR its taking to download the ICS build, I am working my way through EVERY other fastboot file on that site, so far done 12 and nothing
That's bad. An long night for you i guess :sly:
Sent from my CustomiZed XT910
HSD-Pilot said:
That's bad. An long night for you i guess :sly:
Sent from my CustomiZed XT910
Click to expand...
Click to collapse
<ust get to bed will leave it all downloading and try the rest tomorrow, thanks for helping thus far
Questions belong in Q&A
HSD-Pilot said:
Try the EU ICS Fastboot
http://forum.xda-developers.com/showthread.php?p=29242699
Sent from my CustomiZed XT910
Click to expand...
Click to collapse
Downloaded it eventually and although it installs through rsd lite, it still WON'T BOOT, this time I get the fastboot error boot fail.
I tried it several hundred times, I'm getting very desperate!!
Chipster69 said:
Downloaded it eventually and although it installs through rsd lite, it still WON'T BOOT, this time I get the fastboot error boot fail.
I tried it several hundred times, I'm getting very desperate!!
Click to expand...
Click to collapse
And now my battery is dying, and I tried the fastboot charge workaround and it doesn't workaround for me at all.
Please someone help me out, I have googled for hours and tried a million things and nothing helps
Virgin Mobile Canada.
I'm trying to flash a compatible firmware so I can use Temp CWM or even root to flash CWM.
It's near impossible to root this thing on it's default firmware and no firmwares will flash other than the original. I get a SEC AUTH ERROR. I've tried everything. 32/64 windows. I've done the steps. SUT LR. Tried nearly every version of SuperOneClick. Tried psneuter, gingerbreak, zergrush. Nothing works. And yes, USB dev is enabled.
Anybody know if the Virgin Mobile Motoluxe is different than the others?
Does anybody else have this phone?
bump
Have u booted in bootloader while flashing rom, is ur bootloader unlocked?
Are u trying to flash while mobile is on .saying usb dev. Is enabled.
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Moonguy75 said:
Have u booted in bootloader while flashing rom, is ur bootloader unlocked?
Are u trying to flash while mobile is on .saying usb dev. Is enabled.
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Click to expand...
Click to collapse
I flash firmware at the red screen
robertmdebodt said:
I flash firmware at the red screen
Click to expand...
Click to collapse
Which i assume is the bootloader screen? How can you tell if a bootloader is unlocked?
I'm guessing it's locked if I can't flash another firmware.
robertmdebodt said:
Which i assume is the bootloader screen? How can you tell if a bootloader is unlocked?
I'm guessing it's locked if I can't flash another firmware.
Click to expand...
Click to collapse
OK u flash at red screen
if ur device is getting detected in pc then try android download tool ADT.
Moonguy75 said:
OK u flash at red screen
if ur device is getting detected in pc then try android download tool ADT.
Click to expand...
Click to collapse
What exactly am I doing with ADT?
I can't use adb to boot into fastboot.
I've tried "adb reboot-bootloader" and it just restarts the phone normally.
Also tried "fastboot boot recovery.img" manually. But nothing.
Anybody have any other suggestions?
Sent from my XT615 using xda app-developers app
ADT android download tool its a flashtool to flash yaffs images.
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Rsdlite is the tool to flash firmwares on motorola devices
Sent from my XT615 using xda app-developers app
Yes but u can also use Adt to flash if works for every device.
Can adt flash sbf files?
Sent from my XT615 using xda app-developers app
I'm not really sure that ADT tool really applies to rooting the XT615.
Bump
Sent from my XT615 using xda app-developers app
Hi Guys !!!
I'm happy to have found you ... because I have EXACTLY the same problem !
I own a phone from Virgin Mobile... a motoluxe XT615.
I have unlocked it lately ... it work very well on other provider.
I wish to use the phone on Petro-Canada network, which have unlimited data for browsing at 8$ per month.
However, actually, if you go over 2 Gb, they might shut down your account...
Unfortunately, to be able to use proxy (autoproxy) to make all my apps on the phone working with the Petro-Canada data proxy, I need to root the phone !
Here is what I've tried :
I have tried the SuperOneClick without success... I have tried manual rooting ( using adb shell on terminal ) .. I have tried with Windows 7 and I have tried on Ubuntu ... both failed. I have tried to flash the phone firmware with version IRM-152A-0-4034-A01_BFM ... thus resulted to an unusable phone ! ... the application actually crashed (May try it again!) ...
I have tried to flash it with firmware version IRM-1670-0-4073-A02_BFM_service provided by a website that stated that this firmware is already rooted (in order to install Jelly Beam) ... but ... it resulted in having a non-bootable phone at all...
So I had to flash it back with firmware IRM-174F-0-1022-A01_BFM ... and then I got a blue screen ... (after 4 min waiting) . Then I rebooted and was able to use the phone as before ( well, I had to put back all my settings )...
So far, I've tried the gingerbreak (installed on the phone as an APK) ... I have tried psneuter ... and I have tried superoneclick ... and tried some firmware. I can't get this phone rooted at all !!!
HELP!
If anyone know of a firmware that may work on this phone, I'd be happy to try it ! If the firmware provided is already rooted, then good !
I'll be monitoring this thread to see your own progress...
Thanks !
ve9mdb said:
Hi Guys !!!
I'm happy to have found you ... because I have EXACTLY the same problem !
I own a phone from Virgin Mobile... a motoluxe XT615.
I have unlocked it lately ... it work very well on other provider.
I wish to use the phone on Petro-Canada network, which have unlimited data for browsing at 8$ per month.
However, actually, if you go over 2 Gb, they might shut down your account...
Unfortunately, to be able to use proxy (autoproxy) to make all my apps on the phone working with the Petro-Canada data proxy, I need to root the phone !
Here is what I've tried :
I have tried the SuperOneClick without success... I have tried manual rooting ( using adb shell on terminal ) .. I have tried with Windows 7 and I have tried on Ubuntu ... both failed. I have tried to flash the phone firmware with version IRM-152A-0-4034-A01_BFM ... thus resulted to an unusable phone ! ... the application actually crashed (May try it again!) ...
I have tried to flash it with firmware version IRM-1670-0-4073-A02_BFM_service provided by a website that stated that this firmware is already rooted (in order to install Jelly Beam) ... but ... it resulted in having a non-bootable phone at all...
So I had to flash it back with firmware IRM-174F-0-1022-A01_BFM ... and then I got a blue screen ... (after 4 min waiting) . Then I rebooted and was able to use the phone as before ( well, I had to put back all my settings )...
So far, I've tried the gingerbreak (installed on the phone as an APK) ... I have tried psneuter ... and I have tried superoneclick ... and tried some firmware. I can't get this phone rooted at all !!!
HELP!
If anyone know of a firmware that may work on this phone, I'd be happy to try it ! If the firmware provided is already rooted, then good !
I'll be monitoring this thread to see your own progress...
Thanks !
Click to expand...
Click to collapse
Ive tried everything you have and im stuck as well. Hope someone has a solution.
Sent from my XT615 using xda app-developers app
robertmdebodt said:
Ive tried everything you have and im stuck as well. Hope someone has a solution.
Sent from my XT615 using xda app-developers app
Click to expand...
Click to collapse
Hi! hey, have one of you tried installing a Custom Rom, like Enox Rom over that firmware? by example, enox rom has multilanguage and it is pre-rooted, why dont you try it? and tell us what happened ....
Hm doesnt seem to work either. Sec auth error.
Sent from my XT615 using xda app-developers app
Well sec auth for firmware. Cant exactly root or enter tempcwm...so how do i flash a rom?
Sent from my XT615 using xda app-developers app
Hey! I were about to flash cm11 4.4.2 via a guide, I did everything as it said but when he restarted the motorola logo came up and then after that it all went black, can't go in cwm.
Yes, I am rooted.
Yes, I had cwm recovery.
I had version 4.0.4 before flashing.
I followed every step it said and then it screwed up.
Any help?
I've never worked with motorola devices so I don't know how to use the RSD etc.
I can access the Bootloader and then go inside recovery and AP Fastboot but it says it's locked. I can also access stock recovery from that. I tried to another rom from that recovery but it says Signature verification failed.
Download the right Fastboot files for your phone and then use RSD lite to return to stock
Edit: Locked means that your Bootloader is locked which is normal because the Droid RAZR bootloader cannot be unlocked.
DeathChaos said:
Download the right Fastboot files for your phone and then use RSD lite to return to stock
Edit: Locked means that your Bootloader is locked which is normal because the Droid RAZR bootloader cannot be unlocked.
Click to expand...
Click to collapse
What is the right files? I searched tutorials how to use rsd but didn't find any so more help would be appreciated.
Thanks anyway
addemod said:
What is the right files? I searched tutorials how to use rsd but didn't find any so more help would be appreciated.
Thanks anyway
Click to expand...
Click to collapse
sbf(dot)droid-developers(dot)org
Sry i can not post direct links
on this site you find all firmwares but be aware that there are files for the XT910(Euro version) and the XT912(Verizon version)
DeathChaos said:
sbf(dot)droid-developers(dot)org
Sry i can not post direct links
on this site you find all firmwares but be aware that there are files for the XT910(Euro version) and the XT912(Verizon version)
Click to expand...
Click to collapse
Okay, I got an European 4.0.4 firmware. Now what?
(Blur_Version.672.180.41.XT910.NonEFIGSRetail.en.EU)
I don't know what firmware I should download either..?
I were on 4.0.4 before trying to flash.
addemod said:
Okay, I got an European 4.0.4 firmware. Now what?
(Blur_Version.672.180.41.XT910.NonEFIGSRetail.en.EU)
I don't know what firmware I should download either..?
I were on 4.0.4 before trying to flash.
Click to expand...
Click to collapse
Basically you can download every firmware for the XT910 model which is the same version or higher than you was before
Okay, now what? What do I do with that zip folder?
Sent from my GT-N7105 using XDA Premium 4 mobile app
Open it with RSD Lite
Power up your phone in AP Fastboot
Connect your phone to PC
Rsd should recognize it
Then press start
DeathChaos said:
Open it with RSD Lite
Power up your phone in AP Fastboot
Connect your phone to PC
Rsd should recognize it
Then press start
Click to expand...
Click to collapse
What if it doesn't recognize it?
Or.. how do I know if it is recognized?
addemod said:
What if it doesn't recognize it?
Or.. how do I know if it is recognized?
Click to expand...
Click to collapse
If it's not recognize you maybe need to install the motorola drivers
you can download it here
http://www.droidviews.com/android-usb-drivers-samsung-motorola-sony-lg-zte-htc-asus-huawei-acer/
DeathChaos said:
If it's not recognize you maybe need to install the motorola drivers
you can download it here
http://www.droidviews.com/android-usb-drivers-samsung-motorola-sony-lg-zte-htc-asus-huawei-acer/
Click to expand...
Click to collapse
Thanks man. Will edit this post how it went!
Edit 1:
Recognized and now I started the process.
Edit 2:
DONE. It rebooted and now I see the recovery android guy loading some stuff
Edit 3:
You're my hero. It works now! Thank you so much!!
Edit 4:
100th post :3
addemod said:
Thanks man. Will edit this post how it went!
Edit 1:
Recognized and now I started the process.
Edit 2:
DONE. It rebooted and now I see the recovery android guy loading some stuff
Edit 3:
You're my hero. It works now! Thank you so much!!
Click to expand...
Click to collapse
I'm glad that i could help you
hey...thanks for valuable posts...
My problem is I have erased my CID as earlier I had installed JB kernal & jelly bean stock firmware using BMM.... ( I had deleted CID as my mobile is from indian market hence no JB update released for this market hence deleted CID to flash JB kernel)
Now accidently I deleted slot-1 from BMM also format /data & /system.....unmount data/ then BRICKED ....
Its not booting only first logo is coming with error " Customerid error...Contact dealer, Boot to suspend/ TMCD:dead xxxxxxxxxxxxxx "
Now what to do ?? pl. help dears ....
I installed an app to change the boot animation on my Atrix 4g and when I rebooted to see it, all i get is the m logo with dual core technology under it. It is rooted and i didn't flash any new roms or anything. i wiped the cache partition from the recovery menu and also " wipe data/factory reset" but it still doesn't boot up.
its on android 2.3.6 build 4.5.141
please help me :crying:
Do you have recovery software?
Fervi
Just restore the system partition from the backup you SHOULD do before any modification and you will be good to go.
Otherwise, delete the faulty bootanimation and restore the original via adb on recovery and reboot.
There is also a no bootanimation option on build.prop, althrough I'm not sure if it's avaiable on 2.3
Enviado desde mi MB860 usando Tapatalk 2
i don't have any recovery software or backups made.
If you have fastboot option, you can install TWRP (or CWM) and then install other rom (like Motorola Atrix ICS [4.0])
Fervi
ferviverus said:
If you have fastboot option, you can install TWRP (or CWM) and then install other rom (like Motorola Atrix ICS [4.0])
Fervi
Click to expand...
Click to collapse
and how would I accomplish this?
http://wiki.cyanogenmod.org/w/Template:Recovery_install_fastboot
Remember - There is no guarantee that everything will go fine. You do it at your own risk
Fervi
ferviverus;54222742
Remember - There is no guarantee that everything will go fine. You do it at your own risk
Fervi[/QUOTE said:
whenever i type fastboot devices into command prompt even when it is connected and in fastboot it doesn't work.
Click to expand...
Click to collapse
So I got fastboot and everything working. I think flashing the sbf with rsd lite might work, only problem is that whenever I try to download the sbf files it takes me to some ilivid download manager. Soo anyone know where I can download the actual sbf?
specter187 said:
So I got fastboot and everything working. I think flashing the sbf with rsd lite might work, only problem is that whenever I try to download the sbf files it takes me to some ilivid download manager. Soo anyone know where I can download the actual sbf?
Click to expand...
Click to collapse
http://sbf.droid-developers.org/
Sent from my MB886 CM10.2/4.3.1
i think things just got worse
palmbeach05 said:
[ul]htt://sbfdroid-developers. org/[/url]
Sent from my MB886 CM10.2/4.3.1
Click to expand...
Click to collapse
I tried flashing and now when I put my phone into rsd mode its says: failed to boot 1
PwrReason: PWR_KEY_PRESS
starting fastboot protocol support
and when I try to put it into fastboot my phone comes on says something and it turns off to quickly for me to see what the text says.
and when I just power on without pressing anything it says failed to boot 1 and that same confounded dooming m logo
I feel as though my atrix is unflashable or something.
specter187 said:
I tried flashing and now when I put my phone into rsd mode its says: failed to boot 1
PwrReason: PWR_KEY_PRESS
starting fastboot protocol support
and when I try to put it into fastboot my phone comes on says something and it turns off to quickly for me to see what the text says.
and when I just power on without pressing anything it says failed to boot 1 and that same confounded dooming m logo
I feel as though my atrix is unflashable or something.
Click to expand...
Click to collapse
its actually in a state of i need to be unlocked and searching failed to boot 1 would have brought you to this - http://forum.xda-developers.com/showthread.php?t=1528729
the sbf download link from the forum link you posted doesn't work
A DEAD PAGE 404 ERROR
HIDE THE PIE!!!!
specter187 said:
the sbf download link from the forum link you posted doesn't work
A DEAD PAGE 404 ERROR
HIDE THE PIE!!!!
Click to expand...
Click to collapse
Really? the mini sbf that I'm referring to is not a full sbf. it is a 1 MB file that you should get and do to obtain root.
Where in what you have said in this entire thread did you unlock the bootloader?
palmbeach05 said:
Really? the mini sbf that I'm referring to is not a full sbf. it is a 1 MB file that you should get and do to obtain root.
Where in what you have said in this entire thread did you unlock the bootloader?
Click to expand...
Click to collapse
my bootloader isn't unlocked
specter187 said:
my bootloader isn't unlocked
Click to expand...
Click to collapse
Then I would highly advise that you unlock your bootloader before any more help is given to you. I don't say that in a mean way, I say that in a strong recommendation way. Without that bootloader being unlocked, there is little help we can do to get you back up and running.
palmbeach05 said:
Then I would highly advise that you unlock your bootloader before any more help is given to you. I don't say that in a mean way, I say that in a strong recommendation way. Without that bootloader being unlocked, there is little help we can do to get you back up and running.
Click to expand...
Click to collapse
my bootloader is now unlocked
AVAAAAST YEE!
I HAVE SALVATION! MY PHONE IS ON! I HAVE SEEN THE MOTOBLUR SCREEN.
i am almost afraid now to root it
here goes nothing
specter187 said:
my bootloader is now unlocked
Click to expand...
Click to collapse
delete, wifi on my end didn't post this when I originally did. congrats btw!
Update?
there is an update to upgrade it to 4.5.145 i tried and i got a failed to boot 4 starting rsd protocol support
but i fixed that. So can i not update a phone with unlocked bootloader? or is there some kind of run around?