Hey! I were about to flash cm11 4.4.2 via a guide, I did everything as it said but when he restarted the motorola logo came up and then after that it all went black, can't go in cwm.
Yes, I am rooted.
Yes, I had cwm recovery.
I had version 4.0.4 before flashing.
I followed every step it said and then it screwed up.
Any help?
I've never worked with motorola devices so I don't know how to use the RSD etc.
I can access the Bootloader and then go inside recovery and AP Fastboot but it says it's locked. I can also access stock recovery from that. I tried to another rom from that recovery but it says Signature verification failed.
Download the right Fastboot files for your phone and then use RSD lite to return to stock
Edit: Locked means that your Bootloader is locked which is normal because the Droid RAZR bootloader cannot be unlocked.
DeathChaos said:
Download the right Fastboot files for your phone and then use RSD lite to return to stock
Edit: Locked means that your Bootloader is locked which is normal because the Droid RAZR bootloader cannot be unlocked.
Click to expand...
Click to collapse
What is the right files? I searched tutorials how to use rsd but didn't find any so more help would be appreciated.
Thanks anyway
addemod said:
What is the right files? I searched tutorials how to use rsd but didn't find any so more help would be appreciated.
Thanks anyway
Click to expand...
Click to collapse
sbf(dot)droid-developers(dot)org
Sry i can not post direct links
on this site you find all firmwares but be aware that there are files for the XT910(Euro version) and the XT912(Verizon version)
DeathChaos said:
sbf(dot)droid-developers(dot)org
Sry i can not post direct links
on this site you find all firmwares but be aware that there are files for the XT910(Euro version) and the XT912(Verizon version)
Click to expand...
Click to collapse
Okay, I got an European 4.0.4 firmware. Now what?
(Blur_Version.672.180.41.XT910.NonEFIGSRetail.en.EU)
I don't know what firmware I should download either..?
I were on 4.0.4 before trying to flash.
addemod said:
Okay, I got an European 4.0.4 firmware. Now what?
(Blur_Version.672.180.41.XT910.NonEFIGSRetail.en.EU)
I don't know what firmware I should download either..?
I were on 4.0.4 before trying to flash.
Click to expand...
Click to collapse
Basically you can download every firmware for the XT910 model which is the same version or higher than you was before
Okay, now what? What do I do with that zip folder?
Sent from my GT-N7105 using XDA Premium 4 mobile app
Open it with RSD Lite
Power up your phone in AP Fastboot
Connect your phone to PC
Rsd should recognize it
Then press start
DeathChaos said:
Open it with RSD Lite
Power up your phone in AP Fastboot
Connect your phone to PC
Rsd should recognize it
Then press start
Click to expand...
Click to collapse
What if it doesn't recognize it?
Or.. how do I know if it is recognized?
addemod said:
What if it doesn't recognize it?
Or.. how do I know if it is recognized?
Click to expand...
Click to collapse
If it's not recognize you maybe need to install the motorola drivers
you can download it here
http://www.droidviews.com/android-usb-drivers-samsung-motorola-sony-lg-zte-htc-asus-huawei-acer/
DeathChaos said:
If it's not recognize you maybe need to install the motorola drivers
you can download it here
http://www.droidviews.com/android-usb-drivers-samsung-motorola-sony-lg-zte-htc-asus-huawei-acer/
Click to expand...
Click to collapse
Thanks man. Will edit this post how it went!
Edit 1:
Recognized and now I started the process.
Edit 2:
DONE. It rebooted and now I see the recovery android guy loading some stuff
Edit 3:
You're my hero. It works now! Thank you so much!!
Edit 4:
100th post :3
addemod said:
Thanks man. Will edit this post how it went!
Edit 1:
Recognized and now I started the process.
Edit 2:
DONE. It rebooted and now I see the recovery android guy loading some stuff
Edit 3:
You're my hero. It works now! Thank you so much!!
Click to expand...
Click to collapse
I'm glad that i could help you
hey...thanks for valuable posts...
My problem is I have erased my CID as earlier I had installed JB kernal & jelly bean stock firmware using BMM.... ( I had deleted CID as my mobile is from indian market hence no JB update released for this market hence deleted CID to flash JB kernel)
Now accidently I deleted slot-1 from BMM also format /data & /system.....unmount data/ then BRICKED ....
Its not booting only first logo is coming with error " Customerid error...Contact dealer, Boot to suspend/ TMCD:dead xxxxxxxxxxxxxx "
Now what to do ?? pl. help dears ....
Related
Ok, I am having problems with my touchscreen with deadspots and I have ruled out different ROMs being the cause. The phone is still under warranty and I am going to try to call AT&T to hopefully get a replacement phone sent out. But I want to revert to as "stock" as possible before I call.
Should I follow these two threads
MFBSR http://forum.xda-developers.com/showthread.php?t=1421522
FFW http://forum.xda-developers.com/showthread.php?t=1421261
Or should I just Flash one of these fruit cakes?
http://forum.xda-developers.com/showthread.php?t=1163009
I just want to make sure I go about this the right way and the best way to ensure me getting a replacement phone without too much hassle.
Thanks for any help!!
scarbutt11 said:
Ok, I am having problems with my touchscreen with deadspots and I have ruled out different ROMs being the cause. The phone is still under warranty and I am going to try to call AT&T to hopefully get a replacement phone sent out. But I want to revert to as "stock" as possible before I call.
Should I follow these two threads
MFBSR http://forum.xda-developers.com/showthread.php?t=1421522
FFW http://forum.xda-developers.com/showthread.php?t=1421261
Or should I just Flash one of these fruit cakes?
http://forum.xda-developers.com/showthread.php?t=1163009
I just want to make sure I go about this the right way and the best way to ensure me getting a replacement phone without too much hassle.
Thanks for any help!!
Click to expand...
Click to collapse
just returned to stock, i flashed my original sbf with rsd lite after a fastboot -w and fastboot erase system data preinstall. everything gone right
Where can I find my stock sbf?
Sent from my MB860 using XDA
LeroyVold said:
just returned to stock, i flashed my original sbf with rsd lite after a fastboot -w and fastboot erase system data preinstall. everything gone right
Click to expand...
Click to collapse
Hello Leroy
I have a problem with my MB860. It was locked and rooted but i used RSD lite and lost root.
After rsd the phone is not stock. I have some software in preinstall i think as after a clean instal( factory data reset) it cam up with NFS swift, 7Digital zLingo reader preinstlalled..
I just want everything removed. The person who initially rooted missed smtf...
The biggest issue is that the phone seems not to have a recovery as i was never able to get in there( tapping 30 min in the bottom right corner in Android recovery triangle and droid pic screen)
do I need root access to execute those fastboot commands?
If I erase system will my phone boot again ? Rsd worked for me 2 times out of 4, see attached text.
Thank you for the time to investigate my issue.
Best Regards,
Alex
Since the Gingerbread update you have to press both volume up and down at the same time to enter recovery when you see the triangle.
alex1972 said:
Hello Leroy
I have a problem with my MB860. It was locked and rooted but i used RSD lite and lost root.
After rsd the phone is not stock. I have some software in preinstall i think as after a clean instal( factory data reset) it cam up with NFS swift, 7Digital zLingo reader preinstlalled..
I just want everything removed. The person who initially rooted missed smtf...
The biggest issue is that the phone seems not to have a recovery as i was never able to get in there( tapping 30 min in the bottom right corner in Android recovery triangle and droid pic screen)
do I need root access to execute those fastboot commands?
If I erase system will my phone boot again ? Rsd worked for me 2 times out of 4, see attached text.
Thank you for the time to investigate my issue.
Best Regards,
Alex
Click to expand...
Click to collapse
live4nyy said:
Since the Gingerbread update you have to press both volume up and down at the same time to enter recovery when you see the triangle.
Click to expand...
Click to collapse
WOW this is awesome. Never found this info anywere.. i thought i have a recovery issue but stock recovery is there working fine
Still, i tried what Leroy suggested to erase "preinstall"
entered fastboot and typed
fastboot erase preinstall
returned an error, both in my command promt and on Atrix screen
Failed to execute 3000 something...
I used Android recovery to erase cache, erase data factory reset
Phone booted ok starting with motoblur account setup
Still 7digital, NFS Shift,Zlingo reade are installed, so preinstall folder is there.
Any idea how to remove this?
Thanks for help
If you don't have a problem using RSD and you are just looking to return the phone back to stock you can maybe flash an official, signed SBF with RSD.
Here's a post by me from a while back you can take a look at:
http://forum.xda-developers.com/showpost.php?p=23778158&postcount=3
alex1972 said:
WOW this is awesome. Never found this info anywere.. i thought i have a recovery issue but stock recovery is there working fine
Still, i tried what Leroy suggested to erase "preinstall"
entered fastboot and typed
fastboot erase preinstall
returned an error, both in my command promt and on Atrix screen
Failed to execute 3000 something...
I used Android recovery to erase cache, erase data factory reset
Phone booted ok starting with motoblur account setup
Still 7digital, NFS Shift,Zlingo reade are installed, so preinstall folder is there.
Any idea how to remove this?
Thanks for help
Click to expand...
Click to collapse
live4nyy said:
If you don't have a problem using RSD and you are just looking to return the phone back to stock you can maybe flash an official, signed SBF with RSD.
Here's a post by me from a while back you can take a look at:
http://forum.xda-developers.com/showpost.php?p=23778158&postcount=3
Click to expand...
Click to collapse
Thank you Sir,
I am familiar with this thread.
My RSD flashing experience is kind of odd. I did not manage to flash with sim and sd card out of my phone ! I get an error somwere when "swiching to BP pass through" .
Still it works 2 out of 4 tries, using rsd lite 5.3.1
But this did not erase preinstall. is this normal??
How can I erase preinstall?
Thanks for your help
Alex
SWDL for comparasion
Can someone post his SWDL file to compare with mine?
It is in
Progra Files/Mototola/RDSLite
Thanks
I heard someone went over to Motorola's update website and did a clean OS update through the website and it got rid of the "unlock" text and it didn't brick the phone and the phone was back to stock. You might want to try that and let us know if it works.
Atrix_Owner said:
I heard someone went over to Motorola's update website and did a clean OS update through the website and it got rid of the "unlock" text and it didn't brick the phone and the phone was back to stock. You might want to try that and let us know if it works.
Click to expand...
Click to collapse
already tries that. it says i am up to date.
seems like for europe we get only 2.3.4
remember that i am unlocked bootloader and lost root after rsd
other suggestions?
ty
alex1972 said:
already tries that. it says i am up to date.
seems like for europe we get only 2.3.4
remember that i am unlocked bootloader and lost root after rsd
other suggestions?
ty
Click to expand...
Click to collapse
Are you doing the "automated update" method ? If so, try doing the manual way where you download the file and place it in your sd card.
Atrix_Owner said:
Are you doing the "automated update" method ? If so, try doing the manual way where you download the file and place it in your sd card.
Click to expand...
Click to collapse
Thanks Atrix owner, But i do not have this option in Motorola Softuware update program?
Where can i download tfe file for manual update?
TY
You can try re-rooting the phone using this method:
http://www.android-advice.com/2012/root-the-motorola-atrix-4g-running-4-5-141/
NOTE: Switch steps 5 and 6 around in the instructions and use the command "fastboot devices" to see if the device is recognized.
alex1972 said:
Thank you Sir,
I am familiar with this thread.
My RSD flashing experience is kind of odd. I did not manage to flash with sim and sd card out of my phone ! I get an error somwere when "swiching to BP pass through" .
Still it works 2 out of 4 tries, using rsd lite 5.3.1
But this did not erase preinstall. is this normal??
How can I erase preinstall?
Thanks for your help
Alex
Click to expand...
Click to collapse
live4nyy said:
You can try re-rooting the phone using this method:
http://www.android-advice.com/2012/root-the-motorola-atrix-4g-running-4-5-141/
NOTE: Switch steps 5 and 6 around in the instructions and use the command "fastboot devices" to see if the device is recognized.
Click to expand...
Click to collapse
Do you think this will work on my device?
System Version
45.31.1.MB860.NonEFIGSRetail.en.EU
Model Number:
MB860
Android Version:
2.3.4
Baseband Version:
N_01.100.00R
Webtop Version:
WT-1.2.0-133_38
Kernel Version:
2.6.32.9
[email protected] #2
Apflex version:
GAS_EMEA_USAOLYPGBRTCEE_PO23
GAS_EMEA_USAOLYPGBRTCEE_A005
GAS_EMEA_USAOLYPRTEU_M001
Build Number:
4.5.2A-74_OLE-31.1
What about oneclickroot? is it safe for me?
Thanks for the advice. After root i may be agbe to clean my phone.
I did not realize you were still on 2.3.4. Either way, the method I linked to is the "preinstall" method that has worked for quite some time. One-click Root might work but I'm not familiar with the "EU" version.
alex1972 said:
Do you think this will work on my device?
System Version
45.31.1.MB860.NonEFIGSRetail.en.EU
Model Number:
MB860
Android Version:
2.3.4
Baseband Version:
N_01.100.00R
Webtop Version:
WT-1.2.0-133_38
Kernel Version:
2.6.32.9
[email protected] #2
Apflex version:
GAS_EMEA_USAOLYPGBRTCEE_PO23
GAS_EMEA_USAOLYPGBRTCEE_A005
GAS_EMEA_USAOLYPRTEU_M001
Build Number:
4.5.2A-74_OLE-31.1
What about oneclickroot? is it safe for me?
Thanks for the advice. After root i may be agbe to clean my phone.
Click to expand...
Click to collapse
Rsd 5.5 or even 7
I found this link
http://motomodtr.forumcommunity.net/?t=47309178
here
http://forum.xda-developers.com/showthread.php?t=1254851
Did anyone tried rsd fromthat site like 5.6.4 or 5.7?
alex1972 said:
Thanks Atrix owner, But i do not have this option in Motorola Softuware update program?
Where can i download tfe file for manual update?
TY
Click to expand...
Click to collapse
http://www.motorola.com/Support/US-EN/Atrix Upgrade/Atrix-Gingerbread-Update
Atrix_Owner said:
http://www.motorola.com/Support/US-EN/Atrix Upgrade/Atrix-Gingerbread-Update
Click to expand...
Click to collapse
Do you think I shoud try that? I have an international Atrix, not AT&T
3.Your phone is on the latest Android 2.2 software (Blur_Version.4.1.83.MB860.ATT.en.US) or the latest Android 2.3 software (Blur_Version.4.5.91.MB860.ATT.en.US)
Not sure it is safe to do so...
Thanks for the link any way
alex1972 said:
Do you think I shoud try that? I have an international Atrix, not AT&T
3.Your phone is on the latest Android 2.2 software (Blur_Version.4.1.83.MB860.ATT.en.US) or the latest Android 2.3 software (Blur_Version.4.5.91.MB860.ATT.en.US)
Not sure it is safe to do so...
Thanks for the link any way
Click to expand...
Click to collapse
I honestly have no idea. If you are not sure, don't do it because you never know what might happen. I don't want you to brick your phone if you are not sure what you are doing.
If you decide to do it, let me know if it removes the "unlock" text at boot.
hi
Retail EU - Blur_Version.651.73.30-651.167.26.XT910.Retail.en.EU
SPU-11-M1-2
SPU-15-M2-3
Dwonload
Blur_Version.651.167.26.XT910.Retail.en.EU.zip
http://www.mediafire.com/download.php?65o1t73tc8cdq3f
Installation:
1. Copy the Blur_Version.651.167.26.XT910.Retail.en.EU.zip to SD card
2. Boot in Recovery Mode (STOCK Motorola Recovery)
3. Flash
4. Enjoy!
Can you make a nandroid?
Enviado desde mi XT910 usando Tapatalk
it fails on my razr cant update from
Branding: RETAIL en.EU
Market Segment: EuropeAustraliaEMEA
Version: 651.167.19
Android Version: 2.3.6
SPU: 15 M2
ROM Type: Service
Radio Version: U_03.1C.91P
Bootloader Version: 0A.6C
Webtop version: WT-2.0.0-139
Can you please give a changelog for this OTA?
Aashrey99 said:
Can you please give a changelog for this OTA?
Click to expand...
Click to collapse
Like any other 2.3.5 to 2.3.6 updates, what kind of question?
Sliced by my Razr on Tapatalk
almstag said:
Installation:
1. Copy the Blur_Version.651.167.26.XT910.Retail.en.EU.zip to SD card
2. Boot in Recovery Mode (STOCK Motorola Recovery)
3. Flash
4. Enjoy!
Click to expand...
Click to collapse
To boot to recovery mode I must be rooted, is this correct?
If no, how can I get to this mode (the one I came to until now I can't choose any installation).
And if yes how do I do, please point me to a direction with noob-manual, thanks.
Nightwish2 said:
To boot to recovery mode I must be rooted, is this correct?
If no, how can I get to this mode (the one I came to until now I can't choose any installation).
And if yes how do I do, please point me to a direction with noob-manual, thanks.
Click to expand...
Click to collapse
No, you don't need root for stock recovery. Put the file on an external SD card, turn the phone off, hold both volume keys and press power. Then scroll to the recovery option with volume down, and hit volume up to boot into it. Finally, choose to install zip from SD card, and flash away.
Sent from my XT910 using xda premium
Thanks for that guide, really helped.
But as I do so, first I see the Motorola logo (as always when booting) and then there appears a symbol with the android robot and a triangle shape with a "!" inside an nothing else happens... can you tell me what goes wrong?
Nightwish2 said:
Thanks for that guide, really helped.
But as I do so, first I see the Motorola logo (as always when booting) and then there appears a symbol with the android robot and a triangle shape with a "!" inside an nothing else happens... can you tell me what goes wrong?
Click to expand...
Click to collapse
Just press one of the volume keys (both?) when you see the Triangle with ! - and you will see recovery menu
---------- Post added at 01:41 PM ---------- Previous post was at 01:37 PM ----------
zeidof said:
Like any other 2.3.5 to 2.3.6 updates, what kind of question?
Sliced by my Razr on Tapatalk
Click to expand...
Click to collapse
If all 2.3.6 ROMS are the same, why the different version numbers? I think the question is valid - he wants to know what's different about this ROM compared to say 651.167.19?
What kind of answer?
I installed via 651.167.26.XT910.Retail.en.EU rsd lite 4 days ago and I just realized that my jack does not work ... I do not know if it comes from the rom (Radio?. Headphones are not recognized. I'm afraid it is a hardware problem ... Has anyone encountered the same trouble?
nealed said:
If all 2.3.6 ROMS are the same, why the different version numbers? I think the question is valid - he wants to know what's different about this ROM compared to say 651.167.19?
What kind of answer?
Click to expand...
Click to collapse
New radio...that's it...the rest is the same like the **.19 update....the new number is just because the update is for an other part of the world...
cartmanotfat said:
I installed via 651.167.26.XT910.Retail.en.EU rsd lite 4 days ago and I just realized that my jack does not work ... I do not know if it comes from the rom (Radio?. Headphones are not recognized. I'm afraid it is a hardware problem ... Has anyone encountered the same trouble?
Click to expand...
Click to collapse
Hardware...
Guys,
I can't flash this with RSD as there is no xml file in the archive. Moreover, I have Bootstrap recovery and it doesn't seem to recognise the install package, so the update fails.
Could someone advise me how to proceed?
Thanks!
zkvvoob said:
Guys,
I can't flash this with RSD as there is no xml file in the archive. Moreover, I have Bootstrap recovery and it doesn't seem to recognise the install package, so the update fails.
Could someone advise me how to proceed?
Thanks!
Click to expand...
Click to collapse
thtas a ota update no a rsd one....
leisures said:
thtas a ota update no a rsd one....
Click to expand...
Click to collapse
Granted, but the EternityProject's thread/website states that OTA can also be flashed via RSD.
Anyway, I just want to know how to flash this OTA given the fact that CWM recovery won't recognise the package.
Any ideas?
EDIT: All right, I managed to switch to stock recovery, but even it didn't want to install the update. Got an error message about some fingerprints...
I'm currently running 651.167.21.XT910.Retail.en.EU.
zkvvoob said:
Granted, but the EternityProject's thread/website states that OTA can also be flashed via RSD.
Anyway, I just want to know how to flash this OTA given the fact that CWM recovery won't recognise the package.
Any ideas?
EDIT: All right, I managed to switch to stock recovery, but even it didn't want to install the update. Got an error message about some fingerprints...
I'm currently running 651.167.21.XT910.Retail.en.EU.
Click to expand...
Click to collapse
How To Manually Update your Motorola Razr XT910
1. Download the ‘Blur_Version.651.167.26.XT910.Retail.en.EU.zip‘
2. Rename the file to ‘update.zip‘ (without the quotes, of course)
3. Now connect your Razr to the PC via USB cable and transfer the update.zip file to the root of external SD card
4. Disconnect the phone from PC, and power it off.
5. Reboot to Recovery mode.
6. The phone should automatically detect the update.zip file and start the update process. If it asks you for confirmation, Select Yes.
7. Wait for the firmware update to finish. Once it is done, reboot the phone.
8. Let the phone boot up and display the initial ICS setup. Go through it, and sign in with your Google account.
9. Go the Market, and download + install a Terminal Emulator app. This is a good one
10. Launch the terminal on your phone and type in the following commands. This will restore your su backup file created by Voodoo OTA Rootkeeper, and thus restore root access
./system/su-backup
mount -o remount,rw /dev/block/system /system
rm /system/bin/su
ln -s /system/su-backup /system/bin/su
11. That’s it!!! Enjoy rooted Ice Cream Sandwich on your Razr!
Hacker Razr
Jr Member
Hey, hacker812c,
Thanks for the detailed instructions! I did all this, but the update process still ended with a failure. A complete log can be seen on the picture I've attached.
Can anyone help me identify the problem?
EDIT:
Actually, when I rebooted into recovery, I was met with a triangle and an exclamation mark. What's more, the update.zip was not recognised automatically - I had to press the three buttons to see the menus and then select "Install update from SD card".
zkvvoob said:
Hey, hacker812c,
Thanks for the detailed instructions! I did all this, but the update process still ended with a failure. A complete log can be seen on the picture I've attached.
Can anyone help me identify the problem?
EDIT:
Actually, when I rebooted into recovery, I was met with a triangle and an exclamation mark. What's more, the update.zip was not recognised automatically - I had to press the three buttons to see the menus and then select "Install update from SD card".
Click to expand...
Click to collapse
Why don't you just download the fastboot file and flash with RSD lite ? The fastboot file is somewhere in xda developer website. Use search function. I'm sorry I can't provide you the link.
Sent from my XT910 using XDA
blisslove said:
Why don't you just download the fastboot file and flash with RSD lite ? The fastboot file is somewhere in xda developer website. Use search function. I'm sorry I can't provide you the link.
Sent from my XT910 using XDA
Click to expand...
Click to collapse
This version not run... kkkkk
blisslove said:
Why don't you just download the fastboot file and flash with RSD lite ? The fastboot file is somewhere in xda developer website. Use search function. I'm sorry I can't provide you the link.
Sent from my XT910 using XDA
Click to expand...
Click to collapse
I figured it at last. Got the full ROM fastboot files from a French forum and used EternityProject's alternative flash tool. Everything went smoothly.
I'am running on 4.0.4 Chinese leak and I wanna go back to 2.3 Stock, and I just simply can't. I don't know what I'm doing wrong. Nothing is working.
1. Dual Wipe
2. Flash 2.3.6 EU
3. Dual Wipe
4. Going to BP Tools - Here phone stuck on Motorola Logo with Costumer Error.
5. I've tried flash only Radio to force flashing GB radio version. Radio flashed on phone screen but after that phone still stucks on Motorola logo with error ( BP tools ofc)
I'm using Fla**** but I noticed that in bat file there's not cdt.bin flash command when I adding it I'm getting error "preflashing validation failur" Maybe this is a problem? What can couse it?
after return to the GB is very heavy, some write that almost impossible
pok5 said:
I'am running on 4.0.4 Chinese leak and I wanna go back to 2.3 Stock, and I just simply can't. I don't know what I'm doing wrong. Nothing is working.
1. Dual Wipe
2. Flash 2.3.6 EU
3. Dual Wipe
4. Going to BP Tools - Here phone stuck on Motorola Logo with Costumer Error.
5. I've tried flash only Radio to force flashing GB radio version. Radio flashed on phone screen but after that phone still stucks on Motorola logo with error ( BP tools ofc)
I'm using Fla**** but I noticed that in bat file there's not cdt.bin flash command when I adding it I'm getting error "preflashing validation failur" Maybe this is a problem? What can couse it?
Click to expand...
Click to collapse
first of all you flash ics china again
root it
then restore mmcblk1p18 by terminal or connectbot ( the codes are available )
then flash your GB rom.
it would work.
I did it once.
This is some idea are you sure it works?
I didn't do it becouse everyone said to flash GB first and after booting up GB root and restore that file. I just don't wanna stuck with nothing but if I switch this files again on chinese leak. That error message should disappear and I can flash GB, but if it disappear and my phone still stuck on "M" Im end up with "M"- brick phone... ehh
pok5 said:
This is some idea are you sure it works?
I didn't do it becouse everyone said to flash GB first and after booting up GB root and restore that file. I just don't wanna stuck with nothing but if I switch this files again on chinese leak. That error message should disappear and I can flash GB, but if it disappear and my phone still stuck on "M" Im end up with "M"- brick phone... ehh
Click to expand...
Click to collapse
This is the correct way. If you have any trouble flashing you'll be able to flash chinese ics and try downgrade as many times as needed.
Cheers
Sent from my XT910 using Tapatalk 2
Ok I think I'am brick my phone now I replaced orginal file again and flashed back 2.3.6 and of course stuck on M logo... Of course Im without Customer Error now and I can't flash chinese back... There is something I can do now?
pok5 said:
Ok I think I'am brick my phone now I replaced orginal file again and flashed back 2.3.6 and of course stuck on M logo... Of course Im without Customer Error now and I can't flash chinese back... There is something I can do now?
Click to expand...
Click to collapse
Flash the 2.3.6 T-Mobile, if there are flash failes, delete the showed lines in the xml until the flash is finished. Then install the german ICS leak with moto recovery, then you should get a full working system without root, but better than brick. And be patient a few days to the release of the official ICS, we should get fastboot files, and maybe we will get a new root method tomorrow...
dtrail1 said:
Flash the 2.3.6 T-Mobile, if there are flash failes, delete the showed lines in the xml until the flash is finished. Then install the german ICS leak with moto recovery, then you should get a full working system without root, but better than brick. And be patient a few days to the release of the official ICS, we should get fastboot files, and maybe we will get a new root method tomorrow...
Click to expand...
Click to collapse
I love you! Even T-Mobile GB is booted up and working!
pok5 said:
I love you! Even T-Mobile GB is booted up and working!
Click to expand...
Click to collapse
You got luck, man, really! Now you should be ablr to flash any other gb rom or custom roms..
Gesendet von meinem XT910 mit Tapatalk 2
pok5 said:
I love you! Even T-Mobile GB is booted up and working!
Click to expand...
Click to collapse
GB T-mobile work without ID Error and Bptools login?
bogante said:
GB T-mobile work without ID Error and Bptools login?
Click to expand...
Click to collapse
Yes it worked for me, but I don't reffer to do it becouse it could be only luck. I flashed tmobile GB with Fla**** I rewrote all command. I personally think that deleting storage data command helped to boot up GB becouse when I flashed other roms without it phone never flash radio right after flashing.
Sent from my XT910 using XDA
can someone write the exact instructions on how to restore the android 4.0 GB of Chines leak or nandroid
underface said:
can someone write the exact instructions on how to restore the android 4.0 GB of Chines leak or nandroid
Click to expand...
Click to collapse
these are the steps I've had followed
1. flash gb from your region
2. root with motofail if the 2.3.6 or zergbrush if 2.3.5
3. restore the p18 file
Code:
adb shell
su
cat /sdcard-ext/mmcblk1p18-go > /dev/block/mmcblk1p18
4. flash gb again
hint1:
1. you'll have to boot under bp tools 'till step 4.
2. rooting is hard becouse you've to reboot it several times and must enter via bp tools. I just forced starting bp tools by holding both vol buttons during the process.
Cheers
I restored my mmcblk1p18 before downgrade but would only advise this if you have sufficient battery or factory cable.
Sent from my XT910 using XDA
what is it mmcblk1p18
---------- Post added at 10:57 PM ---------- Previous post was at 10:42 PM ----------
pedrotorresfilho said:
these are the steps I've had followed
1. flash gb from your region
Click to expand...
Click to collapse
by rsd lite?
in terminal after flashing to 2.3.6 or 2.3.5?
pedrotorresfilho said:
Code:
adb shell
su
cat /sdcard-ext/mmcblk1p18-go > /dev/block/mmcblk1p18
4. flash gb again
Click to expand...
Click to collapse
pedrotorresfilho said:
hint1:
1. you'll have to boot under bp tools 'till step 4.
2. rooting is hard becouse you've to reboot it several times and must enter via bp tools. I just forced starting bp tools by holding both vol buttons during the process.
Click to expand...
Click to collapse
I do not understand this tips
underface said:
what is it mmcblk1p18
Click to expand...
Click to collapse
Its a dev razr partiton bkp folks ate restoring in regular razr to bypass region signature verification. This hack was presented to us by a chinese dev.
Cheers
Sent from my XT910 using Tapatalk 2
where i can get it
after this all operations, i can flash to my first soft and i restore warranty?
thanks for help
i'm big noob
underface said:
where i can get it
after this all operations, i can flash to my first soft and i restore warranty?
thanks for help
i'm big noob
Click to expand...
Click to collapse
Hi, this is not recommended for non experienced users, at least. You can brick your phone trying. Thanks
Sent from my XT910 using Tapatalk 2
Hello
i think i have managed to brick my phone. I have followed this http://forum.xda-developers.com/showthread.php?t=2402943 by the letter to root my phone which worked fine. Then i tried to install CWM and and since then i can't boot up. I always get "encryption unsuccessful" error message.
After googling i found that i need to unlock my bootloader but when i try to get my token i get FAILED (remote: unsupported command)
My display shows when i try to enter fastboot
AP fastboot flash mode (s)
)A.77
eMMC Info Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED Status Code :0
Battery OK
OK to program
Transfer Mode:
USB Connected
Any help please?
dosada said:
Hello
i think i have managed to brick my phone. I have followed this http://forum.xda-developers.com/showthread.php?t=2402943 by the letter to root my phone which worked fine. Then i tried to install CWM and and since then i can't boot up. I always get "encryption unsuccessful" error message.
After googling i found that i need to unlock my bootloader but when i try to get my token i get FAILED (remote: unsupported command)
My display shows when i try to enter fastboot
AP fastboot flash mode (s)
)A.77
eMMC Info Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED Status Code :0
Battery OK
OK to program
Transfer Mode:
USB Connected
Any help please?
Click to expand...
Click to collapse
Come on guys, there must be someone who can help.
I have finally managed to get the drivers installed properly on win 8.1 and rds lite recognizes the phone now. As soon as i try to flash the xml file of SPYDERIRD_U.01.6.7.3-94_SPI-328_04.11.01P_0A.74_AUSTRALIA_OPTUS_CFC_HWp2b_SIGNED.xml i get an errormessage and it stops.
Any one know what to do?
dosada said:
Come on guys, there must be someone who can help.
I have finally managed to get the drivers installed properly on win 8.1 and rds lite recognizes the phone now. As soon as i try to flash the xml file of SPYDERIRD_U.01.6.7.3-94_SPI-328_04.11.01P_0A.74_AUSTRALIA_OPTUS_CFC_HWp2b_SIGNED.xml i get an errormessage and it stops.
Any one know what to do?
Click to expand...
Click to collapse
Anyone going to help?
So far i can see the phone in rsd and when i get up to step 6 in the flashing process which means that the firmware i am trying to flash is older then the one on device.
The firmware i have downloaded is the stock optus 4.0.4 but the phone has got already 4.1.2 on it.
COuld anyone be nice enough and help a little?
dosada said:
Anyone going to help?
So far i can see the phone in rsd and when i get up to step 6 in the flashing process which means that the firmware i am trying to flash is older then the one on device.
The firmware i have downloaded is the stock optus 4.0.4 but the phone has got already 4.1.2 on it.
COuld anyone be nice enough and help a little?
Click to expand...
Click to collapse
Why did you tried to flash older firmware?
If you were on JB then you must flash JB Fastboot file.
Sent from my XT910 using xda app-developers app
welder73 said:
Why did you tried to flash older firmware?
If you were on JB then you must flash JB Fastboot file.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
BEcause i am stuck and have no idea what to do anymore. I am without a phone for a week one as my main handset is shipped in for repairs.
Which firmware can i flash over rsd lite onto my device? A link?
Thanks a lot
dosada said:
BEcause i am stuck and have no idea what to do anymore. I am without a phone for a week one as my main handset is shipped in for repairs.
Which firmware can i flash over rsd lite onto my device? A link?
Thanks a lot
Click to expand...
Click to collapse
I don't know where are you from but here http://forum.xda-developers.com/showthread.php?t=2231289 are all JB fastboot files,just find which is for your country and flash it.
Sent from my XT910 using xda app-developers app
welder73 said:
I don't know where are you from but here http://forum.xda-developers.com/showthread.php?t=2231289 are all JB fastboot files,just find which is for your country and flash it.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
I am in Australia and that seems to be the only one missing there
dosada said:
I am in Australia and that seems to be the only one missing there
Click to expand...
Click to collapse
You can flash any european fastboot file,don't worry.
Sent from my XT910 using xda app-developers app
welder73 said:
You can flash any european fastboot file,don't worry.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Hvala brate, sledeci put kad sam u BG castim pice.
dosada said:
Hvala brate, sledeci put kad sam u BG castim pice.
Click to expand...
Click to collapse
Nema na čemu!
Haha,ja gledam nik "dosada",rekoh neko naš a ti napisao Australija,pomislim,onda nije
Sorry for oftopic language
Sent from my XT910 using xda app-developers app
I installed an app to change the boot animation on my Atrix 4g and when I rebooted to see it, all i get is the m logo with dual core technology under it. It is rooted and i didn't flash any new roms or anything. i wiped the cache partition from the recovery menu and also " wipe data/factory reset" but it still doesn't boot up.
its on android 2.3.6 build 4.5.141
please help me :crying:
Do you have recovery software?
Fervi
Just restore the system partition from the backup you SHOULD do before any modification and you will be good to go.
Otherwise, delete the faulty bootanimation and restore the original via adb on recovery and reboot.
There is also a no bootanimation option on build.prop, althrough I'm not sure if it's avaiable on 2.3
Enviado desde mi MB860 usando Tapatalk 2
i don't have any recovery software or backups made.
If you have fastboot option, you can install TWRP (or CWM) and then install other rom (like Motorola Atrix ICS [4.0])
Fervi
ferviverus said:
If you have fastboot option, you can install TWRP (or CWM) and then install other rom (like Motorola Atrix ICS [4.0])
Fervi
Click to expand...
Click to collapse
and how would I accomplish this?
http://wiki.cyanogenmod.org/w/Template:Recovery_install_fastboot
Remember - There is no guarantee that everything will go fine. You do it at your own risk
Fervi
ferviverus;54222742
Remember - There is no guarantee that everything will go fine. You do it at your own risk
Fervi[/QUOTE said:
whenever i type fastboot devices into command prompt even when it is connected and in fastboot it doesn't work.
Click to expand...
Click to collapse
So I got fastboot and everything working. I think flashing the sbf with rsd lite might work, only problem is that whenever I try to download the sbf files it takes me to some ilivid download manager. Soo anyone know where I can download the actual sbf?
specter187 said:
So I got fastboot and everything working. I think flashing the sbf with rsd lite might work, only problem is that whenever I try to download the sbf files it takes me to some ilivid download manager. Soo anyone know where I can download the actual sbf?
Click to expand...
Click to collapse
http://sbf.droid-developers.org/
Sent from my MB886 CM10.2/4.3.1
i think things just got worse
palmbeach05 said:
[ul]htt://sbfdroid-developers. org/[/url]
Sent from my MB886 CM10.2/4.3.1
Click to expand...
Click to collapse
I tried flashing and now when I put my phone into rsd mode its says: failed to boot 1
PwrReason: PWR_KEY_PRESS
starting fastboot protocol support
and when I try to put it into fastboot my phone comes on says something and it turns off to quickly for me to see what the text says.
and when I just power on without pressing anything it says failed to boot 1 and that same confounded dooming m logo
I feel as though my atrix is unflashable or something.
specter187 said:
I tried flashing and now when I put my phone into rsd mode its says: failed to boot 1
PwrReason: PWR_KEY_PRESS
starting fastboot protocol support
and when I try to put it into fastboot my phone comes on says something and it turns off to quickly for me to see what the text says.
and when I just power on without pressing anything it says failed to boot 1 and that same confounded dooming m logo
I feel as though my atrix is unflashable or something.
Click to expand...
Click to collapse
its actually in a state of i need to be unlocked and searching failed to boot 1 would have brought you to this - http://forum.xda-developers.com/showthread.php?t=1528729
the sbf download link from the forum link you posted doesn't work
A DEAD PAGE 404 ERROR
HIDE THE PIE!!!!
specter187 said:
the sbf download link from the forum link you posted doesn't work
A DEAD PAGE 404 ERROR
HIDE THE PIE!!!!
Click to expand...
Click to collapse
Really? the mini sbf that I'm referring to is not a full sbf. it is a 1 MB file that you should get and do to obtain root.
Where in what you have said in this entire thread did you unlock the bootloader?
palmbeach05 said:
Really? the mini sbf that I'm referring to is not a full sbf. it is a 1 MB file that you should get and do to obtain root.
Where in what you have said in this entire thread did you unlock the bootloader?
Click to expand...
Click to collapse
my bootloader isn't unlocked
specter187 said:
my bootloader isn't unlocked
Click to expand...
Click to collapse
Then I would highly advise that you unlock your bootloader before any more help is given to you. I don't say that in a mean way, I say that in a strong recommendation way. Without that bootloader being unlocked, there is little help we can do to get you back up and running.
palmbeach05 said:
Then I would highly advise that you unlock your bootloader before any more help is given to you. I don't say that in a mean way, I say that in a strong recommendation way. Without that bootloader being unlocked, there is little help we can do to get you back up and running.
Click to expand...
Click to collapse
my bootloader is now unlocked
AVAAAAST YEE!
I HAVE SALVATION! MY PHONE IS ON! I HAVE SEEN THE MOTOBLUR SCREEN.
i am almost afraid now to root it
here goes nothing
specter187 said:
my bootloader is now unlocked
Click to expand...
Click to collapse
delete, wifi on my end didn't post this when I originally did. congrats btw!
Update?
there is an update to upgrade it to 4.5.145 i tried and i got a failed to boot 4 starting rsd protocol support
but i fixed that. So can i not update a phone with unlocked bootloader? or is there some kind of run around?