OK. I just inherited a Archos 101 tablet with 8GB
How can I tell what Gen it is, so I can update it
Hint: I found that serial # is on the bottom of the prop-up stand, and I KNOW it isn't a Gen 10, because the front camera has what looks like two boxes on it.
I've done this before on other tablets, but this is painful, finding out which "generation" it is.
sigh
I can tell you the following from my status screen
model archos 101 internet tablet
8mb ram
(from s/# label)
product key 1MP5-SM8Y-BUSY-Z5
Board version A101IT-V6
OMAP version ES1.2
Boot version 4.04.000001
firmware 2.4.90 (android 2.2.1)
Resolved: 101 tablet is a Gen8
markbnj said:
OK. I just inherited a Archos 101 tablet with 8GB
How can I tell what Gen it is, so I can update it
Hint: I found that serial # is on the bottom of the prop-up stand, and I KNOW it isn't a Gen 10, because the front camera has what looks like two boxes on it.
I've done this before on other tablets, but this is painful, finding out which "generation" it is.
sigh
I can tell you the following from my status screen
model archos 101 internet tablet
8mb ram
(from s/# label)
product key 1MP5-SM8Y-BUSY-Z5
Board version A101IT-V6
OMAP version ES1.2
Boot version 4.04.000001
firmware 2.4.90 (android 2.2.1)
Click to expand...
Click to collapse
---------------------
Well I answered my own question:
after searching to try and find what firmware 2.4.90 was about, I discovered this thread..
HERE
which confirms it is a GEN8 system.
btw, can anyone tell me the difference between the 2.4.83 software and the 2.4.90 software, and where I could find another copy of the 2.4.90 sw to back up before I do any damage?
cheers...
markbnj said:
---------------------
Well I answered my own question:
after searching to try and find what firmware 2.4.90 was about, I discovered this thread..
HERE
which confirms it is a GEN8 system.
btw, can anyone tell me the difference between the 2.4.83 software and the 2.4.90 software, and where I could find another copy of the 2.4.90 sw to back up before I do any damage?
cheers...
Click to expand...
Click to collapse
2.4.83 might actually be newer than the 2.4.90, because starting with 2.4.80 firmware, Archos stopped with skipping version numbers. First, a firmware version could jump from 2.1.8 to 2.3.28, from 2.4.80 it could only go to 2.4.81 and further.
tablet-guy said:
2.4.83 might actually be newer than the 2.4.90, because starting with 2.4.80 firmware, Archos stopped with skipping version numbers. First, a firmware version could jump from 2.1.8 to 2.3.28, from 2.4.80 it could only go to 2.4.81 and further.
Click to expand...
Click to collapse
OK/ Here's DOY time.
anyone know how I could figure out how I could tell which is newer?
here is a screen shot of the system
I do find it funny, that I haven't found the 2.4.90 software mentioned ANYWHERE else, including the archos website.
sigh..
markbnj said:
OK/ Here's DOY time.
anyone know how I could figure out how I could tell which is newer?
here is a screen shot of the system
I do find it funny, that I haven't found the 2.4.90 software mentioned ANYWHERE else, including the archos website.
sigh..
Click to expand...
Click to collapse
2.4.83 is newer for sure, but I don't know whether 2.4.90 is newer than the 2.4.82; so I just suggest you download the 2.4.83 from Archos website or one of the custom ROMs.
Related
Hi there,
I've currently got my hands on an Archos A70H2-V3 device that a friend asked me to root.
I've run into a couple of snags though, and I'm hoping someone can help me figure out whats going on.
The device says Archos | 70b Internet Tablet, but in recovery it claims to be Archos A70H2-V3. According to my research it SHOULD be a gen8 device, yet the SDE rom gives me an error 207 (wrong firmware version for this device).
When i google A70H2-V3 i find some mention of it in gen9 kernel source, but that firmware was also a no go. (which firmware btw is only 6.5 meg?)
the 70b is supposed to come with honeycomb, and despite the label on the front that says 70b, it sports Android 2.2
Does anyone have any experience with the A70H2-V3? Is the print on the front wrong and should the b be gone? Does anyone know what SDE i can use to get root and everything running?
Many thanks,
Amber Talamasca
I found the reason why it wasn't working.
the firmware is gen8v2, not compatible with either gen8 or gen9
Hi All,
I have recently purchased this gorgeous looking android mini PC with camera. It is running ICS. Wondering if any one aware of a jellybean upgrade or a custom ROM made for this? Following are the specs:
1 Model No: HD2
2 CPU: ARM Cortex-A8, Boxchip/Allwinner A10
3 GPU Mail-400MP*1
4 OS Android 4.0.4
5 RAM 1GB DDR3
Thanks
Firmware?
Hi!
I have one and it only works for a week!
It really don't works very well (lags, bugs, hangs...) but now is only black screen!
Do you have any idea where to find firmnware?
A greeting!
EDIT:
The firware is in the Veidoo web, I can't test it couse mine is back to Honkong.
Enybox EU 2000 Allwinner A10
EDDIE_MUTANTE said:
Hi!
I have one and it only works for a week!
It really don't works very well (lags, bugs, hangs...) but now is only black screen!
Do you have any idea where to find firmnware?
A greeting!
EDIT:
The firware is in the Veidoo web, I can't test it couse mine is back to Honkong.
Click to expand...
Click to collapse
Hi,
i own the same one. Still have no problems with it. The only thing i was wondering about ist an preconfigured Skype Account i can not delete. I tried to reset to factory settings but it did not work. I really would like to delete this Account or better reset the model to have a clean version of android on it. I am still looking for a matching rom. Did you find one?
The firmware you can download here
enybox.com/En/news/class/
can you tell me how you reseted your device. there is a smale hole on the right side for reset but when i push it nothing happens and when i try to install the mentioned firmware it is saying no new firmware necessary.
Would be nice to get some answers.
Good luck so far
Sorry, I have recived one second HD2 and works worst that the first one at last I have my money back and buy one Rikomagic 802IIIS. There is one HD2 dual core that maybe works... to reset you have to download firmware from veidoo and follow the instructions, you will need one microSD greater than 2GB. But I think that Skype kepps the same. Hope you will have more luky that mee!
Hello everyone,
I'm new here
So there is this new tablet I bought : it's a 10.1" IPS ( 1280x800) capacitif with an RK3188 (1.6 GHz) chip, 1 GB of RAM and 16Gb Memory.
It came with a preinstalled 4.2 Android version.
I was just wondering if there is a chance I could upgrade it to 4.4.2 via an official firmware or a ROM.
Thanks in advance.
PS : (I'm new the ROM world).
PS 2 : The name of the tablet is ACCENT Nomade 3G
UP
INJAZ ....? same problem here dude !
anas_nih said:
INJAZ ....? same problem here dude !
Click to expand...
Click to collapse
Same here. I can't find ROMs anywhere for it.
any root for this tablet ?
http://forum.xda-developers.com/showthread.php?t=2310818
Be sure to use the correct kernel for your device. The kernel archive is on the first page.
Myself and others aren't able to get Wi-Fi or Bluetooth working right now, but perhaps you'll be more lucky.
Rom for Accent Nomade10
Please, help me to repair my tablet Accent Nomade10. it's been six weeks what is down. I was unable to find a compatible rom a flasher.
Thank you in advance.
I've got an Android tablet that I cannot download anything to.
Tried a hardset restore a few times that didn't help.
I think something or things got force deleted by mistake.
It's a Chinese generic tablet. I could send it back for refund but cost $50.
The tablet cost $70 so that don't work to well.
Here is what I know about the tablet. I would like to revive it if possible.
I'd try most anthing because it's not any good the way it is.
Some firmware for it might help if I could find it. When I try to download I get a message "Google play is missing from my tablet.
Model-V11
Processor type Quad A-33
Android version 4.4.2
firmware version V2.0
Kernal version 34.39
Buils no. Astor-43 eng 4.4.2ckut 149L
201 50721 test key
Kitkat Android tablet 10 inch
johnsonxxzz said:
I've got an Android tablet that I cannot download anything to.
Tried a hardset restore a few times that didn't help.
I think something or things got force deleted by mistake.
It's a Chinese generic tablet. I could send it back for refund but cost $50.
The tablet cost $70 so that don't work to well.
Here is what I know about the tablet. I would like to revive it if possible.
I'd try most anthing because it's not any good the way it is.
Some firmware for it might help if I could find it. When I try to download I get a message "Google play is missing from my tablet.
Model-V11
Processor type Quad A-33
Android version 4.4.2
firmware version V2.0
Kernal version 34.39
Buils no. Astor-43 eng 4.4.2ckut 149L
201 50721 test key
Kitkat Android tablet 10 inch
Click to expand...
Click to collapse
Maybe you uninstalled google play services by mistake (com.google.android.gms). Go to settings\apps\all and see if its present there. Please post your device manufacturer. Try downloading something using browser or chrome. Hope this helps.
Regards
Hi all,
I have been strolling through google and the universal mcu list, but still nothing.
Model S07
MCU MTCB-JY-V2.47
Android 4.4.4_25032015
Kernel 3.0.36+
rk3066
CPU armv7 1.6GHz (2x)
Memory 1024 MB
If anyone can point me in the right direction I would be thankfull.
Or can the MCu be updated with a higher version?
Metaripley said:
If anyone can point me in the right direction I would be thankfull.
Click to expand...
Click to collapse
I spent days digging then eventually found this when I wasn't really looking:
https://forum.xda-developers.com/t/...are-place-link-with-all.3262491/post-82430255
I don't know how new you are to this but but a few words of caution, from what I've read you do not want to be mixing firmwares for MCUs with different letters to yours. Otherwise you end up with a brick unless you're any good at precision soldering.
As for updating/downgrading, I've also got an MTCB-JY and was on v2.16 from stock.
I've since upgraded to v2.86 then downgraded to a darkleo modified version of v2.59 (https://forum.xda-developers.com/t/mcu-universal-mcu-list.3246386/) because this supposedly has sleep enabled and I'm hoping to find a ROM which utilises this.