[ROM][rk3066] Cant find firmware update file - MTCB Software Development

Hi all,
I have been strolling through google and the universal mcu list, but still nothing.
Model S07
MCU MTCB-JY-V2.47
Android 4.4.4_25032015
Kernel 3.0.36+
rk3066
CPU armv7 1.6GHz (2x)
Memory 1024 MB
If anyone can point me in the right direction I would be thankfull.

Or can the MCu be updated with a higher version?

Metaripley said:
If anyone can point me in the right direction I would be thankfull.
Click to expand...
Click to collapse
I spent days digging then eventually found this when I wasn't really looking:
https://forum.xda-developers.com/t/...are-place-link-with-all.3262491/post-82430255
I don't know how new you are to this but but a few words of caution, from what I've read you do not want to be mixing firmwares for MCUs with different letters to yours. Otherwise you end up with a brick unless you're any good at precision soldering.
As for updating/downgrading, I've also got an MTCB-JY and was on v2.16 from stock.
I've since upgraded to v2.86 then downgraded to a darkleo modified version of v2.59 (https://forum.xda-developers.com/t/mcu-universal-mcu-list.3246386/) because this supposedly has sleep enabled and I'm hoping to find a ROM which utilises this.

Related

[Q] How to ID Gen8/Gen9/Gen10 Archos 101 tablet

OK. I just inherited a Archos 101 tablet with 8GB
How can I tell what Gen it is, so I can update it
Hint: I found that serial # is on the bottom of the prop-up stand, and I KNOW it isn't a Gen 10, because the front camera has what looks like two boxes on it.
I've done this before on other tablets, but this is painful, finding out which "generation" it is.
sigh
I can tell you the following from my status screen
model archos 101 internet tablet
8mb ram
(from s/# label)
product key 1MP5-SM8Y-BUSY-Z5
Board version A101IT-V6
OMAP version ES1.2
Boot version 4.04.000001
firmware 2.4.90 (android 2.2.1)
Resolved: 101 tablet is a Gen8
markbnj said:
OK. I just inherited a Archos 101 tablet with 8GB
How can I tell what Gen it is, so I can update it
Hint: I found that serial # is on the bottom of the prop-up stand, and I KNOW it isn't a Gen 10, because the front camera has what looks like two boxes on it.
I've done this before on other tablets, but this is painful, finding out which "generation" it is.
sigh
I can tell you the following from my status screen
model archos 101 internet tablet
8mb ram
(from s/# label)
product key 1MP5-SM8Y-BUSY-Z5
Board version A101IT-V6
OMAP version ES1.2
Boot version 4.04.000001
firmware 2.4.90 (android 2.2.1)
Click to expand...
Click to collapse
---------------------
Well I answered my own question:
after searching to try and find what firmware 2.4.90 was about, I discovered this thread..
HERE
which confirms it is a GEN8 system.
btw, can anyone tell me the difference between the 2.4.83 software and the 2.4.90 software, and where I could find another copy of the 2.4.90 sw to back up before I do any damage?
cheers...
markbnj said:
---------------------
Well I answered my own question:
after searching to try and find what firmware 2.4.90 was about, I discovered this thread..
HERE
which confirms it is a GEN8 system.
btw, can anyone tell me the difference between the 2.4.83 software and the 2.4.90 software, and where I could find another copy of the 2.4.90 sw to back up before I do any damage?
cheers...
Click to expand...
Click to collapse
2.4.83 might actually be newer than the 2.4.90, because starting with 2.4.80 firmware, Archos stopped with skipping version numbers. First, a firmware version could jump from 2.1.8 to 2.3.28, from 2.4.80 it could only go to 2.4.81 and further.
tablet-guy said:
2.4.83 might actually be newer than the 2.4.90, because starting with 2.4.80 firmware, Archos stopped with skipping version numbers. First, a firmware version could jump from 2.1.8 to 2.3.28, from 2.4.80 it could only go to 2.4.81 and further.
Click to expand...
Click to collapse
OK/ Here's DOY time.
anyone know how I could figure out how I could tell which is newer?
here is a screen shot of the system
I do find it funny, that I haven't found the 2.4.90 software mentioned ANYWHERE else, including the archos website.
sigh..
markbnj said:
OK/ Here's DOY time.
anyone know how I could figure out how I could tell which is newer?
here is a screen shot of the system
I do find it funny, that I haven't found the 2.4.90 software mentioned ANYWHERE else, including the archos website.
sigh..
Click to expand...
Click to collapse
2.4.83 is newer for sure, but I don't know whether 2.4.90 is newer than the 2.4.82; so I just suggest you download the 2.4.83 from Archos website or one of the custom ROMs.

closest rom for my tablet?

I have bought this tablet from amazon and it didn’t work right from the box.
model:
Proscan PLT1077G(BT/1G/8GB)
OS:
Android 4.4.2
Processor:
1.3 GHz 8803 CORTEX A8
karnel:
3.4.67
[email protected] #13
build number:
PLT1077G 20141008
custom build version:
1412756465
I’m getting the following error msg repeatedly:
“com.android.systemui has stopped”
I followed some fixes I found online – I flushed the device’s cache and did a hard factory reset, but no luck.
I searched online but couldn’t find a custom ROM for the device (probably because it is a low budget, non-branded product), so I figured my only way out is finding some kind of a generic ROM to replace the current defective OS.
I realize that a rom that isn’t suitable for my device might cause some problems, but at the moment I’ll settle for a poorly working device rather than a not working one.
My question to you is –
Is that a feasible idea? Can anyone recommend me a rom that might work given my device’s specs?
Alternatively, does anyone know a custom rom for the device or have any other course of action I should try?
Thanks and sorry for my English.
hamingway said:
I have bought this tablet from amazon and it didn’t work right from the box.
model:
Proscan PLT1077G(BT/1G/8GB)
OS:
Android 4.4.2
Processor:
1.3 GHz 8803 CORTEX A8
karnel:
3.4.67
[email protected] #13
build number:
PLT1077G 20141008
custom build version:
1412756465
I’m getting the following error msg repeatedly:
“com.android.systemui has stopped”
I followed some fixes I found online – I flushed the device’s cache and did a hard factory reset, but no luck.
I searched online but couldn’t find a custom ROM for the device (probably because it is a low budget, non-branded product), so I figured my only way out is finding some kind of a generic ROM to replace the current defective OS.
I realize that a rom that isn’t suitable for my device might cause some problems, but at the moment I’ll settle for a poorly working device rather than a not working one.
My question to you is –
Is that a feasible idea? Can anyone recommend me a rom that might work given my device’s specs?
Alternatively, does anyone know a custom rom for the device or have any other course of action I should try?
Thanks and sorry for my English.
Click to expand...
Click to collapse
I can't seem to find any custom roms for that device, and I would NOT advise you trying to install one which isn't meant for your particular device. In the past, I've faced that problem too. I ended up fixing it with a full wipe before reinstalling the stock firmware. If you haven't tried that before, I recommend you do.
I have the same Tablet and rooted mine. I could backup my rom.

Can't figure out how to update m8s+ firmware

I have an android box that was bought a couple of years ago, probably sometime in 2015. Similar to the picture attached: <sorry, apparently I can't post any links until I have 10 posts on this forum>
The new kodi doesn't work on it anymore, and I can't figure out how to update the firmware from 4.4.2 to 5.1. Did some search on the internet, but some people say it works, some say it doesn't, and the consensus seems to be that no one knows which file works with which m8s+ box.
So I'm considering buying a new box. Want a decent box that's easy to update unlike the one I'm holding. But before that, I thought I'd ask for some help here, if someone can help me through the process (I'm not exactly a techy).
Thanks a lot. And apologies if this is not posted in the write forum.
PS. Here's my Box's system info: <sorry, apparently I can't post any links until I have 10 posts on this forum>
Same problem
I have the same problem i have an amlogic M8S+ 8 core Mali 450... Quad core A9.
Base version 1
Current version 2.0.20130913
Android version 4.4.2
Build number KOT49H.20151102 testkeys.
I want to update rom to later version... any help or links appreciated.
with a simple search in google...
in
https://androidtvbox.eu/new-firmware-m8s-tv-box-amlogic-s812-20161219-release/
or
http://chinagadgetsreviews.com/down...5-1-1-stock-firmware-acemax-m8s-tv-box-3.html

need help flashing unknown tablet

I would like to install 4..2 or better on a 7*tablet that currently has a locked down version of 4.2.2 on it so I must t side load. It hsa a rk3188 rockchip and I have a copy of an updatefie for the locked down Android version on there. With this info can someone point me in the right direction as to what firmware I should download? Do I need to post contents of build prop? Also can custom Rom be made from update file?
Vyrrus2k9 said:
I would like to install 4..2 or better on a 7*tablet that currently has a locked down version of 4.2.2 on it so I must t side load. It hsa a rk3188 rockchip and I have a copy of an updatefie for the locked down Android version on there. With this info can someone point me in the right direction as to what firmware I should download? Do I need to post contents of build prop? Also can custom Rom be made from update file?
Click to expand...
Click to collapse
I can't help you without enough details.
Sent from my iPhone using Tapatalk
What all do you need to know?I can only get so much info from the tablet. I bought it from a pawn shop because it had a cool clear case and looked sturdy (it's for kids) but when I turned it on it had some crazy version of Android on it. The tablet has no name and pawn shop guy didn't know. I saw an update file, peeped in it, saw buildprop,etc. I just want a basic version of Android on it(jellybean I assume since buildprop says version on there is based on 4.2.2.). If i post buildprop is that enough? Or do I need to post the update file also along with board and chip specs?

[Q] [ROM] [LOS15] Aquos MONO MO-01K

Hey guy, just trying to figure out something a little more advanced than what I usually do. I wasn't really sure where else to post this, so let me give it a shot, here.
Phone: (Aquos) MONO MO-01k
Specs: JP (Complete) / EN (Incomplete)
CPU: Snapdragon 435 (Qualcomm MSM8940)
Basically, I'm trying to read through the guides about how to port Lineage OS 15 to this phone. I get it, it's not a popular phone. However, from my understanding, it's still possible for me to do it, provided I find the CPU download. That's the problem I'm having-- I can't find where to get the download for that specific CPU, as it's just not popular.
Is it simply impossible, since there's no public release of it, or can I somehow extract it from the phone?

Categories

Resources