Related
Hi,
I see on MobilePlanet they have 2 types of cradles available for the 8525:
- http://www.mobileplanet.com/p.aspx?i=139718
- http://www.mobileplanet.com/p.aspx?i=143228
Which one is better?
What are any differences.
Thanks,
Alan.
One clearly has an extra battery slot.
aw000002 said:
Hi,
I see on MobilePlanet they have 2 types of cradles available for the 8525:
- http://www.mobileplanet.com/p.aspx?i=139718
- http://www.mobileplanet.com/p.aspx?i=143228
Which one is better?
What are any differences.
Thanks,
Alan.
Click to expand...
Click to collapse
I don't know anything about the second one, but I have the first one right in front of me. Some information:
- detachable USB cable, which means it can't charge the device if not connected to a PC
- does not come with a power supply. It seems the design allowed for a socket for an external power supply, but the hole is blocked with some plastic part. I would think there's probably a "de luxe" version with an external power supply.
- good build quality and finish
- extremely poor fit for the TyTN's shape. Almost looks like it was intended for another device. There is no "guidance" for the TyTN when you put it in, so it's quite difficult to get the USB connector into the socket. And when it's in, the USB connector carries most of the TyTN's weight, as the bottom of the TyTN does not make contact with the cradle. I fear this will wear out the TyTN's USB connector rather quickly...
Personally, I would not buy it again.
Cheers
Daniel
it will be good to see a landscape crade with audio out (3.5mm). Mr Gadget in australia has a nice jasjam cradle in landscape and it comes with a dedicated stylus in the crade - but no audio out.
Beware of the cradle from BoxWave, I just got one.
It comes with a A/C adapter to mini USB for charging and a std USB for sync. You can use one or the other. I got the version that has the spare battery charge bay. I also purchased the Std Battery replacement for the 8525 from them as well.
The Cradle has a Red/Green Charge light and a Blue Power LED. My Blue LED was blindingly bright for a few minutes, then it began to flicker like a candle. now it's pretty much out. The charge lite seemed OK, it charged the Boxwave battery and went from steady red to green.
The boxwave battery was thicker than stock and caused the rear cover to bulge a little. I'm not happy and am returning it.
The Stock battery, if inserted into the cradle charge bay, causes the charge light to blink a fast red, Fail? Even though the battery is charged and new. So I'm returning the cradle as well. Too Bad....
Got the boxwave one myself and must agree don't bother.
I sent them an e-mail asking if it can AC charge and SYNC at the same time.
THey assured me it could.
It can't.
I also can't seem to get that across to their people... they still assure me it can and mine must be defective.
The binking lights are majorly anyoing, way to bright. And it is a pain to get it to fit right.
Just got one of the Expansys models above, the one with the 2nd battery charge bay. It fits the 8525 perfectly and seems very well made. It has seperate mini-usb connectors on the back for A/C adapter and Sync.
It also has seperate A/C and USB indicator Leds on the left side and a BiColor LED on the right for the extra battery bay. I tried a charger on it and it charges both battery and phone, A/C Led is On, the USB is Off. I tried a USB PC sync cable and it syncs and charges both batteries, the USB Led is On and the A/C Led is Off. I plugged both USB and A/C into the base, and it appears to still work normally, the A/C and USB Leds are both ON.
So it looks like it will work as a sync cradle on the PC and still charge batteries with the PC Off.
It came with no instructions or cables/adapters so I don't know if plugging both A/C and Sync in is completely OK.
It is a nice little base but for $42 I would have liked some accys and instructions.
Just wanted to double check.
You are saying both a USB and AC connect at the same time on the Expansys model (ones in first post?)
Wanted to make sure before I wasted more money.
Yes, the version that has the 2nd battery bay is what I have;
http://www.mobileplanet.com/p.aspx?i=143228
This model has two rear mini-usb connectors, and I plugged my Cingular 8525 charger into the cradle's mini-usb port labeled as charge.
I also plugged my PC's USB sync cable into the cradle's sync-mini USB port labeled sync.
The cradle seems OK with this. There were no instructions or warning labels telling me "only one at a time", and it's working.
Also I wanted to mention that the charge bay pins are all gold versus the BoxWave which were plain silver. Much nicer quality.
The title says it all. The device refuses to charge or detect my charger. I am not sure what to do or if anything can even be done.
What would the "next step" be?
Is the liight on the charger on?
Is there 12V on the charge plug?
If yes, send it back.
The answer to both of those is yes.
My next question is how much would it cost to get it fixed by Viewsonic (a rough estimate)? I only ask because my warranty is shot due to me flashing Vegan 5b.
I called viewsonic and as it turns out they cannot fix devices that have been flashed.
So, unfortunately I have a brick that will not charge.
If you have any charge left, I would nvflash it and get it back the original firmware and kernel. It's really not difficult to do. Then I'd send it in for warranty repair.
That's a good idea, but my device has enough charge to turn on for only one minute.
Not enough time to reflash the original firmware and kernel. I was unaware that it wouldn't charge until it refused to light up.
Will it run with the plug in?
I tried this and it seems to work. Plug the power supply into the Gtab with it powered off. Hit the right side of the tablet on the edge slightly. This worked for me to get the red light on(I hit mine about three times and the red light came on). Mine only charges while plugged in but I still get a full charge even thought the battery indicator shows 0%. I have used mine all day today without a plug and it sits at 0%
Your idea intrigues me... you tapped it, eh? Well it's worth a good shot, I'm about ready to try incantations!
Okay, so the light on the charger is on. But is it really charging. It could not be charging or have a bad cable or......
You need to find a way to make sure the correct voltage is coming out of the charger plug (the specs are on your
power adapter/charger).
And if you know the charger is actually charging....
I don't know much about the inside -- there are some posts about things like this
from along the way since November. But it might be worth your while to open the case and make sure it's not something as simple as a wire that has come loose.
Also, if it is the charger you can go on the web and Google for MPA-630 power
adapter (it also is used for those digital picture frames) and find a replacement.
Good luck. I wouldn't give up yet!!!
Rev
butchconner said:
Okay, so the light on the charger is on. But is it really charging. It could not be charging or have a bad cable or......
You need to find a way to make sure the correct voltage is coming out of the charger plug (the specs are on your
power adapter/charger).
And if you know the charger is actually charging....
I don't know much about the inside -- there are some posts about things like this
from along the way since November. But it might be worth your while to open the case and make sure it's not something as simple as a wire that has come loose.
Also, if it is the charger you can go on the web and Google for MPA-630 power
adapter (it also is used for those digital picture frames) and find a replacement.
Good luck. I wouldn't give up yet!!!
Rev
Click to expand...
Click to collapse
...I could lick the charger I suppose that would prove to me if the tail end is receiving power from the head.
I am not a man who gives up, but I do lose hope very quick.
You know, in my head I'm going over a list of things that I can do to inject this device with any amount of energy. Just enough to enable me to reflash the stock on...Buying a dock, replacing the battery with a spare fresh one, throwing the whole thing on top of some power lines...
idontknowu2 said:
Will it run with the plug in?
I tried this and it seems to work. Plug the power supply into the Gtab with it powered off. Hit the right side of the tablet on the edge slightly. This worked for me to get the red light on(I hit mine about three times and the red light came on). Mine only charges while plugged in but I still get a full charge even thought the battery indicator shows 0%. I have used mine all day today without a plug and it sits at 0%
Click to expand...
Click to collapse
heh, well I tapped the hell out of that thing... nope (In my heart I didn't think it would work)
I should also say that there is nothing loose, I shake it... and nothing is rattling.
With the DC plugged in, try gently and slowly wiggling the connector left, right, up and down and see if the RED light comes on during the wiggling. If it does then the pin on your DC IN Jack is loose due to failure in the soldering joint holding the DC Jack to the motherboard.
IF you know how to open the Gtablet, you can can resolder the connector. The DC IN Jack even in laptops eventually fail and need to be replaced and/or resoldered. For this reason, I purchased the dock as a backup method to charge the Gtablet.
China computer products are known to be sometimes undersoldered.
Try Googling "loose DC Jack laptop" for more info.
This assumes you power adapter is good.
Hope this helps.
ByByIpad said:
With the DC plugged in, try gently and slowly wiggling the connector left, right, up and down and see if the RED light comes on during the wiggling. If it does then the pin on your DC IN Jack is loose due to failure in the soldering joint holding the DC Jack to the motherboard.
IF you know how to open the Gtablet, you can can resolder the connector. The DC IN Jack even in laptops eventually fail and need to be replaced and/or resoldered. For this reason, I purchased the dock as a backup method to charge the Gtablet.
China computer products are known to be sometimes undersoldered.
Try Googling "loose DC Jack laptop" for more info.
This assumes you power adapter is good.
Hope this helps.
Click to expand...
Click to collapse
I wiggled (very slowly) the connector in very direction possible. The red light still didn't come on and the jack felt a strong as ever.
...Maybe it IS a problem with the adapter itself? however, I still don't think so...
Buy a doc from i2steve here on xda. You will have a sweet new accessory and an alternate charging method. Worth it. At that point you can charge it, flash it and send it in for repair. Or if your lazy like me, just use these doc to charge it and call it good.
Sent from my Chromatic Magic using XDA Premium App
charger
hi i recently loaded a new rom on my g tab after id finished it started up ok but plugged my charger in and behold it did not charge no charge light on, so did a few checks with my multimeter found no supple coming from the power charger.
just thought id reply to your enquiry. so im in the throws of buying a universal charger with the same power requirements. hope this helps. yorkygeorge.
Try going to an Office Depot or a Sears and see if they have a G on display. if so, plug yours in to its power adapter. At least then you can rule out your power supply.
^ nice. Really good idea
If you have a 12V adapter with Cigarette plug lying around the house with the right size plug on the end. Try plugging it into your car ( engine off). The voltage on the adapter is 12V.
Mantara said:
Buy a doc from i2steve here on xda. You will have a sweet new accessory and an alternate charging method. Worth it. At that point you can charge it, flash it and send it in for repair. Or if your lazy like me, just use these doc to charge it and call it good.
Sent from my Chromatic Magic using XDA Premium App
Click to expand...
Click to collapse
I think I'm gonna go this route. It's the only one I can think of right now...
yorkygeorge said:
hi i recently loaded a new rom on my g tab after id finished it started up ok but plugged my charger in and behold it did not charge no charge light on, so did a few checks with my multimeter found no supple coming from the power charger.
just thought id reply to your enquiry. so im in the throws of buying a universal charger with the same power requirements. hope this helps. yorkygeorge.
Click to expand...
Click to collapse
I'll try to get my hands on a multimeter to double check that the problem isn't with the charger (I licked the darn thing and didn't get a shock either).
Hi I want to ask for help. I bought my htc touch pro 2 T 7373 from ebey but only phone with no charger.I bought HTC Power Supply model: TC P300 output: 5V-1A LPS Pin 1+ , Pin 4- .When I put it to charge , phone indicates to charge ,but battery does not charge.Battery is new and I dont think the problem is it.I want to ask you if this charger is compatible with HTC TOUCH PRO 2 T7373.
russslannn said:
Hi I want to ask for help. I bought my htc touch pro 2 T 7373 from ebey but only phone with no charger.I bought HTC Power Supply model: TC P300 output: 5V-1A LPS Pin 1+ , Pin 4- .When I put it to charge , phone indicates to charge ,but battery does not charge.Battery is new and I dont think the problem is it.I want to ask you if this charger is compatible with HTC TOUCH PRO 2 T7373.
Click to expand...
Click to collapse
Just use a miniUSB cable and plug it into your computer. Any USB wall charger should work. I've used iPhone USB chragers with a miniUSB cable, Nikon camera chargers, as well as a Motorola one. You just need to plug it into any USB port either on a wall or on your computer. Leave the device off while it charges overnight.
Problem with charged
I use both ways but no result , phone indicates to charged but battery not charging.Charger is original and consists of two parts: the charger and mini usb cable .When i run it sometimes on the displays show this message : The charging current is not enough for device power consumption.Please shut down unused applications , or switch to AC adapter. And I do not use any applications. I tried to load phone in the off position , indicates that the charger is ON but the battery is not charging .Please help if someone has the same problem
russslannn said:
I use both ways but no result , phone indicates to charged but battery not charging.Charger is original and consists of two parts: the charger and mini usb cable .When i run it sometimes on the displays show this message : The charging current is not enough for device power consumption.Please shut down unused applications , or switch to AC adapter. And I do not use any applications. I tried to load phone in the off position , indicates that the charger is ON but the battery is not charging .Please help if someone has the same problem
Click to expand...
Click to collapse
Try it with a different miniUSB cable. If you don't have one handy, miniUSB cables go for pennies on Amazon or eBay. You can find them in retail stores for about 10 dollars or so as well. If the cable isn't the problem, then it is either a problem with the charge port on the device, or the battery. It's far cheaper to trouble shoot the cable, so let's just start with that.
Sound like the charger is insufficient power, even though it says 1A. Try charging from a computer USB port and see if it charges. HTC don't list TP2 as suitable for this charger.
I am also facing same problem. LED shows charging but phone does not charge. And when I insert charger "USB TO PC" page shows up, Like I have connected the phone to PC.
Please Help...
I just had an issue charging which turned out to be an easy fix.
The led would come on and the icon would show charging but it wasn't increasing the battery %. Then I would get a message about the power not being enough and to plug it into a charger. I tried several chargers and was getting the same thing happening. I blew a few puffs into the charging port which looked clean and it was still happening. I wiggled the cable/plug in the port and occassionally the charging light would go on and off. The charging led even started to go on and off with the phone just sitting still on my table. I feared that my charging port had gone bad so I ordered 2 spare batteries and battery charger from ebay for $10 (works well and battery life good).
While waiting for the ebay purchase to arrive I did some reading up and saw that pins could be bent etc. In my fustration I used a pair of tweezers to gently scrape the charging port pins/contacts (in a straight direction). Then I used an old toothbrush and firmly brushed out the usb port - a whole bunch of lint and stuff come out of the port even though it had previously looked clean.
I plugged in my charger and bingo! My charging issue was gone.
ukexport said:
I just had an issue charging which turned out to be an easy fix.
The led would come on and the icon would show charging but it wasn't increasing the battery %. Then I would get a message about the power not being enough and to plug it into a charger. I tried several chargers and was getting the same thing happening. I blew a few puffs into the charging port which looked clean and it was still happening. I wiggled the cable/plug in the port and occassionally the charging light would go on and off. The charging led even started to go on and off with the phone just sitting still on my table. I feared that my charging port had gone bad so I ordered 2 spare batteries and battery charger from ebay for $10 (works well and battery life good).
While waiting for the ebay purchase to arrive I did some reading up and saw that pins could be bent etc. In my fustration I used a pair of tweezers to gently scrape the charging port pins/contacts (in a straight direction). Then I used an old toothbrush and firmly brushed out the usb port - a whole bunch of lint and stuff come out of the port even though it had previously looked clean.
I plugged in my charger and bingo! My charging issue was gone.
Click to expand...
Click to collapse
That was the biggest problem with MiniUSB was the width and height of those ports. It's a haven for stray dust and dirt. They need to be brushed out every so often, especially when you just drop it in you pocket.
hi buy and it schould work
buy a new charging cable
ukexport said:
I just had an issue charging which turned out to be an easy fix.
The led would come on and the icon would show charging but it wasn't increasing the battery %. Then I would get a message about the power not being enough and to plug it into a charger. I tried several chargers and was getting the same thing happening. I blew a few puffs into the charging port which looked clean and it was still happening. I wiggled the cable/plug in the port and occassionally the charging light would go on and off. The charging led even started to go on and off with the phone just sitting still on my table. I feared that my charging port had gone bad so I ordered 2 spare batteries and battery charger from ebay for $10 (works well and battery life good).
While waiting for the ebay purchase to arrive I did some reading up and saw that pins could be bent etc. In my fustration I used a pair of tweezers to gently scrape the charging port pins/contacts (in a straight direction). Then I used an old toothbrush and firmly brushed out the usb port - a whole bunch of lint and stuff come out of the port even though it had previously looked clean.
I plugged in my charger and bingo! My charging issue was gone.
Click to expand...
Click to collapse
I was facing the same charging problem and was looking for a solution. And i found this forum and read it and did the same thing and my problem is fix.. I can charge my mobile now. Thanks a lot for the great help.
Sarchy Minimum
All of these dumb charges, ie bricks in the wall, use the unused USB pins to communicate how much power they can provide. There are some resistors they put on the D-/D+ to say this is a 700ma charger or whatever. Trouble is that there are limited standards on these resistors so it's more than possible that a phone will charge but not enter high current charging when attached to a new brick in the wall. The cables however are more universal.
so i think i have the most weird droid razr out there. in order for me to charge my droid razr i have to take two wires wrap them around the battery terminals and connect the to a special made charger ( usb or wall charger with a hot and ground wire sticking out). the phone does not say it is charging when i do so but after connected for awhile the phone holds charge just like a regular charger. also when i try pluging a regular charger into the phone to charge it it says its charged a 100% but the phone will not keep charge and eventually cut off. if the phone dies it will only come on witht the special method. if using a regular charger the phone displays and battery with a question mark inside it. i figured that it has something to do with the two connecters on the board that touch the battery connector. not the battery terminals but the two prongs inbetween the terminals. i have not found a actual fix for this problem and the phone is such a good phone its worth doing this to get it to work. if anybody has any ideas on how to permanently fix this so i can go back to using the regular charger i would like to here it but until then the challenge is still unaccepted let me know what you think
Hey, I just got my Z Ultra less than a week ago and I purchased http://www.amazon.com/gp/product/B00JEN5S6A/
I figured it would be easier to use then undoing the charging flap every time.
When I was trying the tip out without being connected to the charger I noticed the magnet was strong but didn't sit in the connector properly..
After looking at some other magnetic chargers online I saw some of them being plugged in upside down so I tried that and it sat in the port better.
When the phone was extremely low on batter (4 percent) I plugged the charger into the tip and put it on upside down. At first the phone restarted so I thought hmm thats weird and unplugged it, I then tried again and made sure it sat in the port snug and my phone turned off and wouldnt turn on again.. After about 15 minutes of the phone charging with no sign of led or charging symbol I found online to try the reset button and it finally turned on. I did some searching online and found out that the port isn't really meant for a magnetic charger but a dock and what I experienced was inverse connection.
So i am wondering if this could have possibly damaged the phone or battery in any way? I dont know if my battery life has been affected or stayed the same as it was the second day of having the phone..
Sorry for the long rant but I would appreciate any input. Thanks
You're not the first one to do a "reverse charging", and I believe that it will or can damage your device. The magnetic connector is made for the Sony DK30 dock, which costs around $30.
http://www.amazon.com/gp/aw/d/B00EC...200_QL40&qid=1404599682&sr=8-1#ref=mp_s_a_1_1
The thing with using accessories like you do, is that it's not a genuine product by Sony, so any damage done by say, a no-name charger like you're using, won't be covered by the warranty. If your Ultra catches fire in the middle of the night and you're using a " fake" charger, well tough luck. Sony won't cover that.
I would use a "fake" charger if the Ultra had a removable battery, in case it got damaged, but it doesn't, so you're really playing with fire right now.
Well to be honest I did not know the charger wasn't made for that until I experienced that. I've ordered the dk30 dock online as the sony store near me did not carry it but was wondering if I should be concerned with what already happened and get my phone swapped as it's still within return policy..?
Haze69 said:
Well to be honest I did not know the charger wasn't made for that until I experienced that. I've ordered the dk30 dock online as the sony store near me did not carry it but was wondering if I should be concerned with what already happened and get my phone swapped as it's still within return policy..?
Click to expand...
Click to collapse
i bought a aftermarket magnetic charging cable, plugged reversely and same as yours, couldnt turn on until i pressed the reset button to make the led lit when charging, waited a few hours plugged to the usb sony charger, led turned out normal. just when i thought it was fine again i noticed whenever i turned it off it turned itself on again and boot loop until i pressed the reset button to make it really off, plus, when it hit 15% battery life on the indicator on notification bar, it dropped 2% per second, yes, per second, and phone died. returned it and waiting for replacement.
see if yours has those symptoms, i think reverse charging does damage to the battery or the phone, see the shape of the tips of the charging port different, there may be a reason behind it.
edit: the reason i tried plugging the magnetic cable reversely was while i plugged it in normal direction, it showed its charging while it wasnt, thats y, and it was a cheap aftermarket one, i ended up buying a official dk30 from sony store
Mwinggg said:
i bought a aftermarket magnetic charging cable, plugged reversely and same as yours, couldnt turn on until i pressed the reset button to make the led lit when charging, waited a few hours plugged to the usb sony charger, led turned out normal. just when i thought it was fine again i noticed whenever i turned it off it turned itself on again and boot loop until i pressed the reset button to make it really off, plus, when it hit 15% battery life on the indicator on notification bar, it dropped 2% per second, yes, per second, and phone died. returned it and waiting for replacement.
see if yours has those symptoms, i think reverse charging does damage to the battery or the phone, see the shape of the tips of the charging port different, there may be a reason behind it.
edit: the reason i tried plugging the magnetic cable reversely was while i plugged it in normal direction, it showed its charging while it wasnt, thats y, and it was a cheap aftermarket one, i ended up buying a official dk30 from sony store
Click to expand...
Click to collapse
I have a Magnetic Charger - and I too experienced the shut down when I tried it upside down once.
I'm using a generic charger and haven't experienced any issues for months - just make sure to use it correctly.
This thread has me worried now though haha.
bigystyle84 said:
I have a Magnetic Charger - and I too experienced the shut down when I tried it upside down once.
I'm using a generic charger and haven't experienced any issues for months - just make sure to use it correctly.
This thread has me worried now though haha.
Click to expand...
Click to collapse
Im sure there has been one that the charger was the wrong polarity I think, and another where it was misused, that ended up with near dead batteries
I accidentally connected the charger in reverse, well the port is now dead. The phone thinks it's charging but the charger light never comes on and GSAM shows no increase in charge. At least the USB port still works.
Sent from my C6806_GPe using XDA Premium 4 mobile app
Thank you very much for the warning. After reading this thread I was thinking that Sony should have keyed the connector to only plug in one orientation. I looked at my magnetic charger and that is indeed the case. One opening is round and one is oval, so the round opening will not fit over the oval contact on the phone. I guess the issue is the quality of the magnetic charger cable - a cheap one still may allow contact. The key is that the contacts on the cable are recessed into the housing so that the housing must fit over the posts on the phone before contact is made.
why in the name of all that is holy does the connector even allow for being plugged in the wrong way???
Cheap Chineese knockoffs. JUST DON'T BUY THEM.
Sony should have just gone with induction charging but oh well. As cheap as the GPe is right now, I'll just buy another one.
Sent from my C6806_GPe using XDA Premium 4 mobile app
I just found this thread after plugging in my magnetic adapter in backwards. I have been using it for almost 6 months with no problem, and then this past Friday, I sat down at my desk and grabbed the charger and stuck it on without looking, and the phone shut off. You know the rest, now the magnetic port is done, and the screen will either keep coming back on while charging, or shut off and not come back on unless I force it off with Power + Vol + key. This sucks. I don't think I will get another Sony since it was so easy to kill it. Great big screen though, I will miss it.
ec4912 said:
I just found this thread after plugging in my magnetic adapter in backwards. I have been using it for almost 6 months with no problem, and then this past Friday, I sat down at my desk and grabbed the charger and stuck it on without looking, and the phone shut off. You know the rest, now the magnetic port is done, and the screen will either keep coming back on while charging, or shut off and not come back on unless I force it off with Power + Vol + key. This sucks. I don't think I will get another Sony since it was so easy to kill it. Great big screen though, I will miss it.
Click to expand...
Click to collapse
It wasn't a sony cable though was it? can you blame sony for a defective charger that they don't make?
Sorry about the phone by the way
blueether said:
It wasn't a sony cable though was it? can you blame sony for a defective charger that they don't make?
Sorry about the phone by the way
Click to expand...
Click to collapse
You're right, it was some cheap Chinese magnetic adapter, and true, I can't blame Sony for that. I guess I have gotten accustomed to buying any cheap microUSB cable or even headphone I can find, and using it on my phone without a second thought. I think that's why all of us who have messed up our phones with these bad magnetic adapters didn't stop to think we were putting our phone at risk. It was just another cheap accessory. I guess I have learned my lesson to be more careful what I stick into my next phone.
Be careful of where you purchase the dock as well; I purchased the DK 30 dock on eBay, and after about a month, started having problems charging. One day, it wouldn't charge on the dock at all.
Saw that the right pin in the dock has one of the plastic surrounds which broke off, which I assume is the culprit of the problem.
So off I went, this time Amazon, to order another dock, which works, using it now to charge my mobile phone.
Sent from my C6806 using XDA Free mobile app
Fire!
I almost killed my phone! Aside from upside-down, I was using an apple 2.4a charger - it burned the side out of the phone, and melted the cable right off the connector - in fact - the melting-off probably saved me - house filled with smoke etc. It did the mad re-start loop thing for about half an hour (my guess - there's a temp sensor in there which was tripping our because of the heat), but to my amazement, even with the side melted to death, the phone now still seems to work OK for me (probably not including the "waterproof" feature anymore).
Was super lucky it didn't burn the house down. What kind of idiot manufacturer doesn't put a polarity bridge on their reversable socket!?!?!?!
cndg said:
I almost killed my phone! Aside from upside-down, I was using an apple 2.4a charger - it burned the side out of the phone, and melted the cable right off the connector - in fact - the melting-off probably saved me - house filled with smoke etc. It did the mad re-start loop thing for about half an hour (my guess - there's a temp sensor in there which was tripping our because of the heat), but to my amazement, even with the side melted to death, the phone now still seems to work OK for me (probably not including the "waterproof" feature anymore).
Was super lucky it didn't burn the house down. What kind of idiot manufacturer doesn't put a polarity bridge on their reversable socket!?!?!?!
Click to expand...
Click to collapse
with an oem version the plug isn't reversible for all accounts I've read
I bought one on eBay allegedly SONY, broken in two-three weeks of use.
Brought another on Amazon, believe it is genuine, still works.
Both were the DK-30 charging dock. The broken one I use to watch YouTube.
Sent from my C6806 using XDA Free mobile app
Just to echo all of the previous posters - had the same issue as well.
My experience played out as follows:
* Got phone - over joyed since recently price reductions for such a high quality product meant approx USD290.
* Realise the flaps are a bit annoying so after 1 week; get magnetic charger. Seems to work at office
* Get another for home. After try two times; connect but not charge. connect in reverse. Phone shuts off immediately.
* PANICK - for next 30 minutes try the little red button, power switch + (combinations). Nothing helps
* eventually just plug into USB port and pray. After another 20 minutes get blinking red LED. But still doesn't boot
* another 20 minutes ago- solid LED; it boots! still at original percentage battery.
* now have strange problem - without anything plugged in; the phone can't boot properly, get repated SONY logo followed by power off and loop. CPU gets hot.
* If plug in USB - get styled battery icon; and when booting... IT WORKS.
* If close to fully charge (>90%) screen keeps on activating now when charging.
* to rub salt in the wound; the original magnetic charger at work doesn't seem to charge anymore (ie magnetic charger port dead).
Since it is a 3 week old phone, have lots of mixed feelings now. It was REALLY great purchase for the price and happy with it at first. but now I feel like I have a damaged product. feel quite upset.
I know buying cheap USB charger was the problem; but for SONY to have something so critical and vulnerable makes me wary as well. Initlally happy with phone (came from Galaxy Note camp) but now just wary of the phones.
coastalmikey said:
I accidentally connected the charger in reverse, well the port is now dead. The phone thinks it's charging but the charger light never comes on and GSAM shows no increase in charge. At least the USB port still works.
Sent from my C6806_GPe using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I am facing the same problem. My magnetic charging port is now dead ( charging led lights up but the doesn't charged the battery. battery level goes down ). I have changed the magnetic charging port, but still behaves the same. Do you think changing the charging flex will make it work ? because if the magnetic charging port is damaged from motherboard itself, then there is no point changing the flex...
Appreciate your reply.
Thanks !