Hi. I have a problem with my lenovo. I updated it by ota but the new sw was terrible so i wanted to back to previous. I backuped but many apps and chinese stuff. So i decided to full format, dalvik, chache, data, system and backup my previous sw everything by cwm. After that my phone olny vibrate. Adb devices doesn't see phone. But if I plug to the usb, pc shows me disc- stupid- but only i can format it (i did not do that), and after installed drivers shows it like Lenovo HS-USB Diagnostics 9006. All day i`m looking for files to flash tool but i cannot find. Stock and cmw not working. Pleas help.
up
http://forum.xda-developers.com/showthread.php?t=2461418
Yoy have cwm, drivers and an english rom there
Sent from my Nexus 4
I have the same
sonymanw said:
Hi. I have a problem with my lenovo. I updated it by ota but the new sw was terrible so i wanted to back to previous. I backuped but many apps and chinese stuff. So i decided to full format, dalvik, chache, data, system and backup my previous sw everything by cwm. After that my phone olny vibrate. Adb devices doesn't see phone. But if I plug to the usb, pc shows me disc- stupid- but only i can format it (i did not do that), and after installed drivers shows it like Lenovo HS-USB Diagnostics 9006. All day i`m looking for files to flash tool but i cannot find. Stock and cmw not working. Pleas help.
Click to expand...
Click to collapse
I think I removed the kernel with cmw and detects me a HS-USB QDLoader 9008 in Windows. Is there a way to connect the phone (with battery or without, eg) with some key (or key combination thereof) that entered the phone in fastboot mode? I do not see anything in adb devices and there is no bootloader - dark screen (battery ok).
wadli said:
I think I removed the kernel with cmw and detects me a HS-USB QDLoader 9008 in Windows. Is there a way to connect the phone (with battery or without, eg) with some key (or key combination thereof) that entered the phone in fastboot mode? I do not see anything in adb devices and there is no bootloader - dark screen (battery ok).
Click to expand...
Click to collapse
hey,
did you solve that?
gimmeluck2 said:
hey,
did you solve that?
Click to expand...
Click to collapse
no, i didn't
Hello. I'm new here. and not native speaker.
I'll try my best for English.
My device got soft bricked after I'm trying to install the new ROM.
Actually I had installed the ROM but It didn't appear anything.
Then I'd try to restore my backup to Its place.
It made my phone brick.
I can't boot into recovery mode, ROM and also FTM mode.
I must have an access to adb, If I want to boot into bootloader.
But I don't have any access to it at all!!.
I had read some post and I hope that DFU can help me.
But I don't know how can I boot into that mode.
And I had try hold volume + and - with and without power button but it still the same.
I had read that the DFU mode will display nothing but have the briefly red led.
I had accident plug the USB to device without battery.
And I got it, The briefly red led light with nothing change in the display (still nothing).
My computer recognizes it as a ZTE technology device. But It's in an unspecified device zone.
I had installed the ZTE USB device (My computer is MS Windows 8.1) and I had also installed it with unsigned driver mode too.
What could I do for getting it to work again?
Have I found the correct DFU mode?
My device is ZTE V817.
With MSM8225Q CPU and MSM7627A board platform specified in default.prop.
Hello Forum,
Since last week I've been searching how to recover Alcatel OT900 (AV 2.3.4) which is now stuck (i assume semi brick) phone after hard reset.
Below is the status of the phone
*FIRST ///PHONE IS NOT DEAD :angel:
* have no recovery but recently rooted (cannot go to recovery mode)
* when going setup (after boot)
error the setup wizard
(process com.jrdcom.jrdsetupwizard) has stopped unexpectedly.
FORCE CLOSE
* OTU upgrade fail (network connection error)
* by pressing vol - & power & home keys computer (Win7) detects
ALCATEL HS-USB QsBLoader 9002 (comm port)
*When OTU loads and tries to connect to the server then the above driver details vanish from the device manager.
* When powering on as normal Computer tries to install driver but soon shows disconnected
* On Fastboot - vibrates only
Tried several tools but no result there any proper solution for this ? I mean through Windows ? Your step wise guide is highly appreciated.
PS Same problem as : http://forum.xda-developers.com/showthread.php?t=1597847
But can't access fastboot. I came to know that SP flash tool can address this, but what to use in scatterloading? Since there is no scatter .txt files for factory FW or most of the custom FW. I have tried to create the scatter file from MTKDroid tools. but device not connected. I figure out that device is connected only through comm.port but not as usb device (while booting normal startup and pluging in usb the phone is blank /OFF) Did anybody else having same problem? Any alternate solution?
I solved this problem by downloading Firmware ALCATEL OT-990 OS 2.3 (Gingerbread).rar i am new so i cant post link so i will separate some parts. dfiles . eu/files/qqc5kjy05 and following Instructions.txt from inside that archive. I had EXACTLY same problem. I managed to do first step by removing battery for 2 minutes, then insert it and then do first step right away.
Hello
excuse my English please ,cause i'm french man
I had a tcl m3g chinise rom miui ,root
The phone propose me an update on ota
i accept and and now its impossible to restart my phone
i plug it to my pc and it says unknow device with 5 disk detected
Py pc says that i must formated them to work
i do that and know its horrible
impossible to restart my phone,no drivers work .no recovery mode ,no download mode etc...
can you help me ,please
Hi, I happen to have the same phone and something similar happened to me but with a CM12.1 Moke rom, the phone was working fine but it turned off twice randomly, I connected it to the wallcharger and the PC but nothing happened, the 5 USB units appeared too on my computer so I had to keep the power button pressed for 10 seconds to force a reboot and the system loaded fine, though I went back to another CM12.1 rom. Try doing that, keep the power button pressed for 10 seconds and see if that forces a reboot.
Hi
I've tried to keep the power button pressed but nothing append.
dano33 said:
Hello
excuse my English please ,cause i'm french man
I had a tcl m3g chinise rom miui ,root
The phone propose me an update on ota
i accept and and now its impossible to restart my phone
i plug it to my pc and it says unknow device with 5 disk detected
Py pc says that i must formated them to work
i do that and know its horrible
impossible to restart my phone,no drivers work .no recovery mode ,no download mode etc...
can you help me ,please
Click to expand...
Click to collapse
hello , I also have the same problem . What did you do with your phone ? fix it? and how? help me please ..
- Download the DiskGenius
- connect the phone to a computer via USB (best to use the connector on the rear panel, and even better to use a laptop, there is the battery and if the lights go out, you are protected)
- in the Device Manager (Windows) will be Qualcomm HS-USB QDLoader 9006 (COMx ) - if not, click the + and - volume, along with the power button, the appearance, let go first and then the power and volume buttons. If you do not appear, it means you have not installed drivers Qualcomm (in the cap is, install)
- run DiskGenius (be careful! You get access to all the connected drives, do not remove too much!))
- Delete partitions SBL1 (Right-click to select the recycle symbol ), confirm the removal (Yes) to apply your changes (the first icon in the menu, vaguely reminiscent of the character Commander floppy or Total).
- disconnected and reconnected body to USB, and lo and behold - found new hardware, Windows itself installs the necessary drivers. In Device Manager, we see Qualcomm HS-USB QDLoader 9008 (COMx)
- sewn factory Lewa4.0 using QPST (full instructions in the topic, I will not be added)
- After the firmware disable the body for a long time (5-10-15 seconds) click on the button supply. We see native boot anim Hooray !!! (translated from 4pda.ru)
Original chinese tutorial:
bbs.ydss.cn/thread-524446-1-1 . html (translate it and give it a go)
Good Luck
---------- Post added at 01:29 PM ---------- Previous post was at 01:19 PM ----------
yilmazco said:
hello , I also have the same problem . What did you do with your phone ? fix it? and how? help me please ..
Click to expand...
Click to collapse
Tool:
yadi.sk/d/GvPjkXFli8u9S
yilmazco said:
hello , I also have the same problem . What did you do with your phone ? fix it? and how? help me please ..
Click to expand...
Click to collapse
sorry for the trouble, as you did at the end to fix it?
TCL m3g .qcn file
alberto00 said:
sorry for the trouble, as you did at the end to fix it?
Click to expand...
Click to collapse
Hi,
Accidentally, I wiped all data of TCL m3g and somehow, I managed to bring the phone alive. But it seems like qcn file is totally corrupted and phone networks are no more identified. IMEI, ESN & MEID are all zeroes now.
Can any body provide .qcn file of TCL m3g?
Thanks
Here is the restart Solution
dano33 said:
Hello
excuse my English please ,cause i'm french man
I had a tcl m3g chinise rom miui ,root
The phone propose me an update on ota
i accept and and now its impossible to restart my phone
i plug it to my pc and it says unknow device with 5 disk detected
Py pc says that i must formated them to work
i do that and know its horrible
impossible to restart my phone,no drivers work .no recovery mode ,no download mode etc...
can you help me ,please
Click to expand...
Click to collapse
To restart your device you have to hold the power button + volume down button for 30-45 seconds.
It will restarts automatically...
vivixa said:
Hi,
Accidentally, I wiped all data of TCL m3g and somehow, I managed to bring the phone alive. But it seems like qcn file is totally corrupted and phone networks are no more identified. IMEI, ESN & MEID are all zeroes now.
Can any body provide .qcn file of TCL m3g?
Thanks
Click to expand...
Click to collapse
The same thing for me. I can´t connect to any network. Tried different cards.
Please post the qcn file.
Tcl M3g bricked
I'm also have the same problem . How to go recovery mode?
how to save changes
xamixmix said:
- Download the DiskGenius
- connect the phone to a computer via USB (best to use the connector on the rear panel, and even better to use a laptop, there is the battery and if the lights go out, you are protected)
- in the Device Manager (Windows) will be Qualcomm HS-USB QDLoader 9006 (COMx ) - if not, click the + and - volume, along with the power button, the appearance, let go first and then the power and volume buttons. If you do not appear, it means you have not installed drivers Qualcomm (in the cap is, install)
- run DiskGenius (be careful! You get access to all the connected drives, do not remove too much!))
- Delete partitions SBL1 (Right-click to select the recycle symbol ), confirm the removal (Yes) to apply your changes (the first icon in the menu, vaguely reminiscent of the character Commander floppy or Total).
- disconnected and reconnected body to USB, and lo and behold - found new hardware, Windows itself installs the necessary drivers. In Device Manager, we see Qualcomm HS-USB QDLoader 9008 (COMx)
- sewn factory Lewa4.0 using QPST (full instructions in the topic, I will not be added)
- After the firmware disable the body for a long time (5-10-15 seconds) click on the button supply. We see native boot anim Hooray !!! (translated from 4pda.ru)
Original chinese tutorial:
bbs.ydss.cn/thread-524446-1-1 . html (translate it and give it a go)
Good Luck
---------- Post added at 01:29 PM ---------- Previous post was at 01:19 PM ----------
Tool:
yadi.sk/d/GvPjkXFli8u9S
Click to expand...
Click to collapse
after deleting partition sbl1 how to save the changes diskgenius is asking for licence
My phone is totally bricked after I deleted the partition and saved. Now it is not turning on, no bootloader or recovery or anything. Only the LED light turns on when I connect to charger or USB. Not detected in devise manager either. Please help.
I get my phone bach to life by flashing the emax mini files. But now i didn't get any network. Please post the qcn file for the TCL.
dano33 said:
Hello
excuse my English please ,cause i'm french man
I had a tcl m3g chinise rom miui ,root
The phone propose me an update on ota
i accept and and now its impossible to restart my phone
i plug it to my pc and it says unknow device with 5 disk detected
Py pc says that i must formated them to work
i do that and know its horrible
impossible to restart my phone,no drivers work .no recovery mode ,no download mode etc...
can you help me ,please
Click to expand...
Click to collapse
first you have to download your stock rom
than you can get into download mode by holding volume down button + power button for a while apx 35 to 60 seconds, As soon as getting vibration hold volume up button by holding them both....
Enjoy....
Hello guys, please help!
I have a smartphone lg l65 d285.
rebuilt after hardbirik,but there is a problem phone is switched on only loader.img SD Card
without loader sdcard on your smartphone does not turn on
p.s. I'm sorry for my English writing via translate.google.com
Same for me, i was able to make it boot with a loader.img on the sdcard, but i got stuck on
==============
Download Mode
===============
Loading......
Press the volum up key untill you see the download screen.
I can press it endlessly and it doesnt switch to download mode, so the PC doesnt recognize it in this state.
Its Hard bricked because without the sdcard i got QDloader 9008 on device manager