I recently got my Receiver Speaker(used to listen to the other side caller on call) replaced. Since then GPRS speed seems to be too slow that even light apps like Whatsapp barely works. I'm using Project Doge rom. I was wondering if anything in the Engineering mode would help.
I am not at all familiar with engineering mode settings.
Internet connectivity is fine with WiFi and 3G, but too slow using 2G.
Related
I am on bionix 1.3.1 and have noticed that whenever I turn my wifi on it seems to not allow me data access. My web browser will not connect to a page, market won't load, and any downloads that were in progress will fail. it's as if turning on the wifi is overriding my data connection and blocking it. It says that it's connected in the menu though. Any advice?
Thanks
Edit: I just noticed when looking at my phone stats, that when I turn on my wifi my mobile network state says disconnected, and it connects again when wifi is turned off.
Also, I have an airport extreme and a mac, perhaps that is my problem. I've scoured the internet and found a bunch of info about this problem, but haven't found anything that works yet.
Sent from my SGH-T959 using XDA App
Im sure someone will correct me if Im wrong but if you switch from wifi to 3g while downloading the download usually will fail because you were using only wifi to download the content and when that turned off it doesn't just switch to using 3g you have to manually retry the download using 3g .... when wifi and 3g are on wifi doesn't speed up the 3g instead it does the internet related work and the 3g does the text and phone call related work
that makes sense, thanks. as for the connection problem, it is definitely mac related. my wifi seems to work on other networks. I just need to figure out how to make it work with the airport. It's just weird to me that it says it's connected and shows signal bars, but won't access the internet.
jstein222 said:
that makes sense, thanks. as for the connection problem, it is definitely mac related. my wifi seems to work on other networks. I just need to figure out how to make it work with the airport. It's just weird to me that it says it's connected and shows signal bars, but won't access the internet.
Click to expand...
Click to collapse
so is the new problem that the airport extreme won't give wifi to your phone or that its not working at all
According to my phone I am connected via wifi to my network from the airport, however, the phone cannot access any internet functions when connected. When I disable wifi, it works fine with 3g or edge. It seems to be something with the settings on my airport, not the phone itself.
jstein222 said:
According to my phone I am connected via wifi to my network from the airport, however, the phone cannot access any internet functions when connected. When I disable wifi, it works fine with 3g or edge. It seems to be something with the settings on my airport, not the phone itself.
Click to expand...
Click to collapse
That's surprising maybe this means apple products are biased
I'm having an issue that has been bothering me. I run Etrade Pro with streaming data and charts, and when I leave my home, it does not automatically cut the wifi and switch to LTE or 4g. My app stops and says there is no data. This has happened a lot and I wonder if there are some settings that need to assure that mt cell signal automatically kicks in when Wifi cuts out.
ANother problem is that if I approach an area where there is wifi, the phone connects, and i usually get a data issue again.
I also got the same problem when i stream a video while on wifi and then leave the wifi zone, so I know it is not an Etrade app specific problem,
Any advice would be appreciated. What I am having to do is manually shut off wifi and then restart the app when the 4g kicks in, and I know the phone is designed to handle this for me.
lindenhurst said:
I'm having an issue that has been bothering me. I run Etrade Pro with streaming data and charts, and when I leave my home, it does not automatically cut the wifi and switch to LTE or 4g. My app stops and says there is no data. This has happened a lot and I wonder if there are some settings that need to assure that mt cell signal automatically kicks in when Wifi cuts out.
ANother problem is that if I approach an area where there is wifi, the phone connects, and i usually get a data issue again.
I also got the same problem when i stream a video while on wifi and then leave the wifi zone, so I know it is not an Etrade app specific problem,
Any advice would be appreciated. What I am having to do is manually shut off wifi and then restart the app when the 4g kicks in, and I know the phone is designed to handle this for me.
Click to expand...
Click to collapse
I'm not sure this is something we have control over, I was reading over a white paper qualcomm wrote on the matter: http://www.qualcomm.com/media/documents/files/3g-wifi-seamless-offload.pdf
Our phone is 3GPP R8 however, I'm not sure at&t's network supports dual stack mobile IP, so therefor the handoff between wifi and 3g would have to interrupt data.
WHat bothers me is that I just came from an Iphone4 and the iPhone switched from wifi to cell, and my Etrade App kept running. There may have been a momentary lag, but i didn't have to close the app and start it again.
Let me look into it more when I get home. At work youtube is blocked on the company network so I can't test if a video continues between handover here.
WHen I leave my home and know that I am out of wifi range, I still see the wifi symbol on the home screen but it looks like there are no bars of strength. It's like the thing is still trying to draw data through wifi that is well out of range.
Frustrating.
lindenhurst said:
WHen I leave my home and know that I am out of wifi range, I still see the wifi symbol on the home screen but it looks like there are no bars of strength. It's like the thing is still trying to draw data through wifi that is well out of range.
Frustrating.
Click to expand...
Click to collapse
So if the wifi symbol is on the status bar that means the phone is still connected to the wifi (or at least thinks it is).
I was not able to reproduce your problem with youtube when I was home. I started a video on wifi in my home, and then walked out the front door and down the hall until it lost the connection, the wifi symbol disappeared and it just had to re-buffer a little bit after it switched to LTE then the video continued.
I am facing an unusual issue with my CHD. WiFi works perfectly but when I switch to GPRS, i am not able to access internet.As a result whenever i am outside my home i end up being unable to use any internet based services like whatsapp and navigation. My phone is not rooted. I have upgraded JB4.2.1 feom miceomax sercicw centre.Please Help
Hi
Last week my phone (rooted Motorola RAZR i running the stock T-Mobile UK rom ) developed these problems:
1. WiFi - within a few hours of no use, WiFi indicator goes from blue to grey; which apparently means "not connected to Google services". This apparently means that gmail syncing, etc doesn't work, but other non-Google internet stuff should be fine... but in my case this was not the case, ie all internet connectivity was down.
2. Mobile data - same issue a WiFi; that is no use, indicator blue to grey, no connectivity.
3. Bluetooth - no audio for calls, but music is fine. When i call someone via Bluetooth headset, i can't hear their phone ringing or their voice once they answer.
So it seems that each radio loses partial functionality. I say partial because WiFi and mobile data both still showed me connected, despite not seeming to function at all. The issues occur separately. Each issue can be fixed by turning the relevant service off and on again. I haven't installed any new apps recently (that i can recall).
I don't expect anyone to diagnose the issue(s) (they seem related), but could i would like some advice regarding how to debug the problems, eg tools, logs, etc that might help me see what's going wrong.
TIA.
Colin
Hello
Does anyone know any application or way of discovering if data cuts (3g / 4g) occur in a connection? I want to know if I have a problem with my ISP, although using the mobile as a tethering to navigate is more or less good, when I connect by VPN to work using the mobile data connection disconnections occur continuously (I have tried with the same sim in other mobile and it happens the same) if I use wifi this problem does not occur
Does anyone know any way to see if there are cuts to talk to my ISP?
thanks