Related
Okay, complete re-write...
For MY guide (The point is, this is not all inclusive, nor does it dictate that its the only way... but if you want help on this thread....)
USE safestrap 3.65 (no exceptions)
USE kitkat 4.4 (no exceptions)
YOU MUST WIPE EVERYTHING - Use the Advanced button, in the wipe menu... Thats what its for... Advanced stuff... Like flashing over STOCK... (Its best to copy all your NEEDED data (Don't just copy everything), PLEASE DO NOT COPY /DATA /ANDROID/ /.SECURE ECT ONLY what YOU recognize
Please make sure ALL APPS work before using apps2sd /mounts2sd. (This means literally testing each app, one by one. In your app drawer. You'd be surprised how much doesn't work when not wiped/flashed properly (And sometimes even when done right)
Boot into recovery
Select "Boot options"
Select "Stock ROM"
Select "Wipe"
Select "Advanced Wipe"
Check mark every single box you see! (I mean it) (I hope you already went through your internal and external sd card and copied your pictures, music, videos, emails, texts, downloads, ect somewhere safe. NOT ON THE PHONE...
"Swipe to Wipe"
Select "Install"
Find and Select your flashable rom .zip
Select Add More Zips
Find and Select your flashable gapps .zip
"Swipe to Confirm Flash"
"Wipe Dalvik Cache"
"Reboot"
I would just like to confirm that flashing "Aviator CM11" on the stock partition does work and boots without problems.
Boot times are incredible compared to using slot 1-4
Enjoy not wasting 6gb of space!
Errors:
Could not install to usb or sdcard -playstore error : Either bug in rom, or you have installed that app, once upon a time on some other rom/same rom. Go to root explorer, and use the search function to find the left over files. (Try searching only one part of the word of the app) Or look in /data/data
Ya, noticed this in a few 4.4 RoMs. Like Avatar etc. I am using latest cm nightly with "ZERO" issues!!! Pretty good feeling. Apparently, imo, some RoMs have not been updated fully. This was an issue for many when using AOKP 4.3. Suggestions are in that thread, old suggestions at this point. But may be helpful!!
XT912 RaZR SpYdEr CDMA
hit ThAnKs if I was helpful!!!
SaschaElble said:
Please note : USE LATEST SAFESTRAP. I believe it was version 6.10 that started allowing proper stock slot flashing for custom roms, but the developer noted that only new versions would work, for example, anything below cm10.1 would NOT WORK. I used Aviator CM11 (4.4 kitkat)
So... I originally maxed out my space when creating a slot for my rom to fit in, which left me about 500mb for my internal sdcard. Using mounts2sd or other internal/external sd swaps gave me trouble one way or another (Camera refused to record to sd, so I would get interrupted during hd recording ect.). So I dived in and just erased all my slots, and installed my rom on the stock slot.
I would just like to confirm that flashing "Aviator CM11" on the stock partition does work and boots without problems.
Boot times are incredible compared to using slot 1-4
I did not wipe system. Only did a davilik/cache/data wipe. Installed Aviator CM11 on top. Rebooted. confirmed it works. Then installed JBX kernel. Which also worked just fine.
Now I have 6gb free on my internal sdcard!!
(The only problem I have is Aviator CM11 related, cannot install certain apps from the app store. "Could not install to sdcard or usb storage" )
Click to expand...
Click to collapse
Cool! I am running KitKat of Gnex as primary and it rocks. But, on primary phone, xt912, using Cm1 Kitkat on Slot 1 (Aviator) with old Jelly bean stock. UGH! So, u r saying u installed kitkat to stock and is all still good??? Why did you not wipe system since u threw out stock?
Also, not very sharp with JBX. Is itdiffcult to install? can u point me in the right direction.
Boot up on kitkat slot1 is sooooooooooooooooooo slowwwwwwwwwwwwwwwwwww. would like to try it as primary. Any help is appreciated.
Gsm razr xt910?
Hey, will this methos work for GSM RAZR XT910?
For all: Flashing a Kexec Rom to stock system works fine whether with latest SS or with BMM! The stock system is working faster than any virtual slots, there's no "disk emulation". I am not sure about one thing: In theory the stock system could use less power than virtual slots - thos of you who ever installed Linux Mint near their Windows installation (Installation from Windows), where a virtual hdd disk image partition is being created. When installation Linux Mint this way the suspend mode is not available as usual. Maybe it works the same way on our phones?
I have been using Mokee on my stock slot for weeks now. Very stable, everything works (except HDMI because of source), and battery is pretty decent. I'm using SS 3.65, flashing to stock is painless, and I believe all Roms posted here are kexec based. I have used gummy, cm, mokee and slim on stock slot. But where can the "Aviator" Roms be found?
Sent from the depths of a twisted mind.
mad_fitter said:
I have been using Mokee on my stock slot for weeks now. Very stable, everything works (except HDMI because of source), and battery is pretty decent. I'm using SS 3.65, flashing to stock is painless, and I believe all Roms posted here are kexec based. I have used gummy, cm, mokee and slim on stock slot. But where can the "Aviator" Roms be found?
Sent from the depths of a twisted mind.
Click to expand...
Click to collapse
There is another forum located here: http://www.droidrzr.com/index.php/forum/156-vzw-droid-razr-roms-xt912/
There are some of the older Blur based ROMs, and the newer Aviator ROMs as well. Aviator has a Gummy, and a CM11 version. They tweak those ROMs with a few things and work well.
I have also installed KitKat Roms on the stock partion, which I started doing to free up room on phone. I also ran into the same issue trying to install one app ("can not install on USB or SD Card") and gplay subsequently gave a refund after going through their support system.
I tried JB Rom on stock partion but the install failed. BUT - I installed it on rom slot 1 and created a backup and the "recovered" that backup on the stock slot and it worked.
The aviator roms on http://www.droidrzr.com/index.php/forum/156-vzw-droid-razr-roms-xt912/ are pretty good. Running the aviator gummy (my current favorite) right now - early Jan version as the camera did not work on later Jan version - might be fixed now - haven't checked in a week.
What is the CORRECT WAY to install any custom ROM on the STOCK SLOT?
For example:
I was using SS 6.15
SLOT: STOCK ---- ROGERS CANADA JB STOCK ROM 4.12
SLOT: 1 ---- SLIMKAT 2.4
RIGHT Now I´ve installed:
SLOT: STOCK ---- SLIMKAT 2.5 RC1 (over the ROGERS CANADA JB STOCK ROM 4.12 )
SLOT: 1 ---- SLIMKAT 2.4
SLOT: STock is not working properly. Camera, browser, quick settings are not working.
SHOULD I enter SS 6.15, WIPE EVERYTHING on SLOT STOCK (DATA, SYSTEM,CACHE,DALVIK,etc) and re - FLASH SlimKAT 2.5 RC1 on SLOT STOCK??
Question here:
I am wanting to flash a custom 4.1.2 Rom on my stockside. Is this possible with SS?
Is it only possible with KK ROms?
Right now I have a modified latest .165 OTA running and nothing on my slots for SS.
Michelangelos said:
What is the CORRECT WAY to install any custom ROM on the STOCK SLOT?
For example:
I was using SS 6.15
SLOT: STOCK ---- ROGERS CANADA JB STOCK ROM 4.12
SLOT: 1 ---- SLIMKAT 2.4
RIGHT Now I´ve installed:
SLOT: STOCK ---- SLIMKAT 2.5 RC1 (over the ROGERS CANADA JB STOCK ROM 4.12 )
SLOT: 1 ---- SLIMKAT 2.4
SLOT: STock is not working properly. Camera, browser, quick settings are not working.
SHOULD I enter SS 6.15, WIPE EVERYTHING on SLOT STOCK (DATA, SYSTEM,CACHE,DALVIK,etc) and re - FLASH SlimKAT 2.5 RC1 on SLOT STOCK??
Click to expand...
Click to collapse
I want to know That too!!
andrewrvincent said:
I have also installed KitKat Roms on the stock partion, which I started doing to free up room on phone. I also ran into the same issue trying to install one app ("can not install on USB or SD Card") and gplay subsequently gave a refund after going through their support system.
Click to expand...
Click to collapse
Using file manager, go to internal storage, go into data/data and delete the offending apps. This is caused by left over files from a previous installation of that app. The hard way, but for sure way, is to wipe EVERYTHING. (internal storage)
The proper way, at least for me, to install on stock slot, is to:
Pull out my external SD card. Goto wipe, click advanced wipe, check everything. Wipe.
Then flash your custom rom, and don't forget your gapps if you use them. Reboot.
islandfever said:
Question here:
I am wanting to flash a custom 4.1.2 Rom on my stockside. Is this possible with SS?
Is it only possible with KK ROms?
Right now I have a modified latest .165 OTA running and nothing on my slots for SS.
Click to expand...
Click to collapse
Yes, for the least amount of possible issues, use SS 1.65, and use a jb+ kexec rom. (4.1.2 should be fine)
andrewrvincent said:
I have also installed KitKat Roms on the stock partion, which I started doing to free up room on phone. I also ran into the same issue trying to install one app ("can not install on USB or SD Card") and gplay subsequently gave a refund after going through their support system.
I tried JB Rom on stock partion but the install failed. BUT - I installed it on rom slot 1 and created a backup and the "recovered" that backup on the stock slot and it worked.
The aviator roms on http://www.droidrzr.com/index.php/forum/156-vzw-droid-razr-roms-xt912/ are pretty good. Running the aviator gummy (my current favorite) right now - early Jan version as the camera did not work on later Jan version - might be fixed now - haven't checked in a week.
Click to expand...
Click to collapse
I would say definitely try wiping everything to resolve the issues. That's always good for all ROM's if you're going from one ROM to a completely different one. About the only time I will dirty flash is if I'm just updating the current system I'm running. Even then I've had minor problems.
Sent from my DROID SPYDER using xda app-developers app
ludeawakening said:
I would say definitely try wiping everything to resolve the issues. That's always good for all ROM's if you're going from one ROM to a completely different one. About the only time I will dirty flash is if I'm just updating the current system I'm running. Even then I've had minor problems.
Sent from my DROID SPYDER using xda app-developers app
Click to expand...
Click to collapse
For example i want to flash slimkat to my stock partition using safestrap 3.65 for umts spyder, to flash it correctly i have only to do a wipe data/cache/dalvik cache? and then flash it over stock 4.1(which i'm currently running)?? or do i have to perform a format system/data/cache also? thanks in advance...
Yes, I would say you're going to have to wipe everything, being that Kit Kat and Jelly Bean are going to have two different types of system data. They will DEFINITELY conflict with each other if you don't do a full wipe.
Sent from my DROID SPYDER using xda app-developers app
ludeawakening said:
Yes, I would say you're going to have to wipe everything, being that Kit Kat and Jelly Bean are going to have two different types of system data. They will DEFINITELY conflict with each other if you don't do a full wipe.
Sent from my DROID SPYDER using xda app-developers app
Click to expand...
Click to collapse
i installed safestrap, booted into recovery selected advanced wipe, wiped everything except internal sd and external sd, so i wiped my system also, i was running jb 4.1 stock, installed slimkat 2.6 and during the installation my phone screen turned black and then rebooted and got into bootloop. should i flash slim kat over jb stock? wiping only data cache and dalvik? i think that problem occurred when i wiped system, but i dont know... please someone tell me how to correctly flash slimkat to stock slot using safestrap 3.65 for umts Spyder
Steven87 said:
i installed safestrap, booted into recovery selected advanced wipe, wiped everything except internal sd and external sd, so i wiped my system also, i was running jb 4.1 stock, installed slimkat 2.6 and during the installation my phone screen turned black and then rebooted and got into bootloop. should i flash slim kat over jb stock? wiping only data cache and dalvik? i think that problem occurred when i wiped system, but i dont know... please someone tell me how to correctly flash slimkat to stock slot using safestrap 3.65 for umts Spyder
Click to expand...
Click to collapse
I've completely rewritten the first post in this thread. Please go over it, for verbatim instructions.
Helron said:
Cool! I am running KitKat of Gnex as primary and it rocks. But, on primary phone, xt912, using Cm1 Kitkat on Slot 1 (Aviator) with old Jelly bean stock. UGH! So, u r saying u installed kitkat to stock and is all still good??? Why did you not wipe system since u threw out stock?
Also, not very sharp with JBX. Is itdiffcult to install? can u point me in the right direction.
Boot up on kitkat slot1 is sooooooooooooooooooo slowwwwwwwwwwwwwwwwwww. would like to try it as primary. Any help is appreciated.
Click to expand...
Click to collapse
Hey, I rewrote my guide for flashing on stock.
YES!!! Put that bad boy on stock and watch yourself cry out of sheer joy.. as if you got a new phone!
YES!!! Boot time is so much faster for stock slot than any other slot!!
Jbx kernel is easy to install. Google "xt912 jbx xda" and the guide will be there. Just download and go to safestrap and install it. Its a zip like everything else. Also check mark the moto x camera when the options pop up. 1080p almost 100% stock camera. (Only missing steady hand feature)
Just one thing.... Disabling core 1 of the cpu causes the phone to become incredibly more responsive... so not only is core 1 wasting my battery, its also slowing down the damn phone!!! EDIT: Using the built in CPU turner, and setting to performance finally fixed it for me.
if i wipe everything should't that wipe my intenal memory which contains the rom i want to flash?? i was lost at that part, where should i put the rom and gapps before flashing?
I have a 16 gig 8.9" KF that I bought a week or so ago.
I immediately installed safestrap and after rooting the stock ROM and creating a new ROM slot, I restored the backup to ROM slot 1. I then did a bunch of mods including all the GAPPS/HDXPosed module etc. to the ROM slot 1 ROM and everything works perfectly.
I have both the Google Playstore and the Amazon Playstore running side by side and both work perfectly. GMAIL works perfectly and so does Chrome browser. Google voice search works and so does Google maps.
Nova Prime Launcher & live widgets work perfectly, but I hardly ever use that setup as the main reason I bought it was to use as a Kindle reader(to replace a Kindle Paperwhite that I don't really like).
Now that I have it all setup the way I want it, I don't plan on making any more changes at all. At this point, I have been considering doing the same thing I did with my Galaxy Note 3 running safestrap and a Beans ROM.
With the Note, after I had the ROM in the slot running perfectly, I backed it up (and saved a copy of the BU to my Surface tablet) and then went in and deleted the ROM slot and restored the BU to the stock slot so I regained all the space taken by the ROM slot.and have run that way ever since.
Now, I am considering doing the same thing with the KF. Does anybody see any reason why this wouldn't work fine with the Fire the same way it has in my phone??
jmorton10 said:
...I backed it up (and saved a copy of the BU to my Surface tablet) and then went in and deleted the ROM slot and restored the BU to the stock slot so I regained all the space taken by the ROM slot.and have run that way ever since.
Now, I am considering doing the same thing with the KF. Does anybody see any reason why this wouldn't work fine with the Fire the same way it has in my phone??
Click to expand...
Click to collapse
I would like to know the answer to that question as well.
Just to clarify, you are talking about writing over your stock rom with the modified one containing Gapps and Amazon?
I've never had to restore from safestrap, if something happens and you cannot boot to your new stock rom will it let you enter recovery and load a rom from a source not already on the kindle? So, load your backup file from your pc on to your device?
cf9182 said:
Just to clarify, you are talking about writing over your stock rom with the modified one containing Gapps and Amazon?
Click to expand...
Click to collapse
Exactly.
Did that with my safestrapped Note 3 and never had a single problem.
jmorton10 said:
Exactly.
Did that with my safestrapped Note 3 and never had a single problem.
Click to expand...
Click to collapse
Tried it earlier and it sent me in to a boot loop. If/when I get back up and running again I'll probably just do the modifications on my stock to begin with and see how that works out.
one person's failure
jmorton10 said:
I have a 16 gig 8.9" KF that I bought a week or so ago.
I immediately installed safestrap and after rooting the stock ROM and creating a new ROM slot, I restored the backup to ROM slot 1. I then did a bunch of mods including all the GAPPS/HDXPosed module etc. to the ROM slot 1 ROM and everything works perfectly.
Now that I have it all setup the way I want it, I don't plan on making any more changes at all. At this point, I have been considering doing the same thing I did with my Galaxy Note 3 running safestrap and a Beans ROM.
With the Note, after I had the ROM in the slot running perfectly, I backed it up (and saved a copy of the BU to my Surface tablet) and then went in and deleted the ROM slot and restored the BU to the stock slot so I regained all the space taken by the ROM slot.and have run that way ever since.
Now, I am considering doing the same thing with the KF. Does anybody see any reason why this wouldn't work fine with the Fire the same way it has in my phone??
Click to expand...
Click to collapse
I tried what you are talking about. First, I had difficulty getting safestrap to do the backup. it was as if there was not enough space to write the backup. I had to cannibalize the install by deleting apps until I could get the backup to complete. Second, when I tried to install the backup in my stock ROM partition, the install failed. Third, and most importantly, I then mistakenly touched the reboot button....then I had a non-recoverable brick type device.
If I decide to try again I will use safestrap to backup my stock system and install everything from scratch on my stock ROM partition not a ROM slot. Right now I am operating on a new device in a ROM slot because I haven't had the courage to build from scratch on my stock ROM.
toz35com said:
I then mistakenly touched the reboot button....then I had a non-recoverable brick type device.
Click to expand...
Click to collapse
So there is no hope if I did exactly that?
cf9182 said:
So there is no hope if I did exactly that?
Click to expand...
Click to collapse
Too many of the system files and directories were missing to gain root again. I had access with adb but couldn't install the system files and safestrap was gone. I could push a few files, but without root access nothing would push into the system directories. adb "shell" didn't work because of missing libraries.
endless bootloop
Hi all,
I'm not new to Android and flashing ROM's but I've always had Galaxy phones. I just updated my SGS3 to SlimKat last week and love it. My friend has a RAZR MAXX that is giving him problems and I told him we could probably flash a new ROM to it and improve its performance. I've read through a few threads and watched the video's on the top of the general page and see that SafeStrap seems to be the way to put new ROMS on the RAZR. My questions are:
1. Can you use TWRP or another recovery to install ROMS or is SafeStrap the only way?
2. Do you have to keep the stock ROM if you use SafeStrap?
3. Is there a way to reflash the factory ROM if you do replace it using either TWRP or SafeStrap?
Thanks for any help.
Dave
Safestrap is the best recommended way. There is a BBM option but it is incompatible with newer builds and has failed to be updated. I personally use and highly recommend SS
2. You do not. Newest SS 3.65 allows for stock flashing where you cab overwrite stock instead of using the virtual slots.
3. Indeed there is. Matt's Utility is the best way. Completely simplified and includes root and other option. Goes through ap fastboot and works well I have used it to recovery or flash stock many times.
DROID RAZR MAXX CM 11 JBX KERNEL
JakeDHS07 said:
Safestrap is the best recommended way. There is a BBM option but it is incompatible with newer builds and has failed to be updated. I personally use and highly recommend SS
2. You do not. Newest SS 3.65 allows for stock flashing where you cab overwrite stock instead of using the virtual slots.
3. Indeed there is. Matt's Utility is the best way. Completely simplified and includes root and other option. Goes through ap fastboot and works well I have used it to recovery or flash stock many times.
DROID RAZR MAXX CM 11 JBX KERNEL
Click to expand...
Click to collapse
Awesome information and thank you for the response. I appreciate it!
Dave
Not a problem. Its what I do here
DROID RAZR MAXX CM 11 JBX KERNEL
JakeDHS07 said:
Not a problem. Its what I do here
DROID RAZR MAXX CM 11 JBX KERNEL
Click to expand...
Click to collapse
Ok, so I got Root on the RAZR and installed Sidestrap no issues, I also got SlimKat installed in ROM slot 1. That worked fine but none of the apps carried over obviously. So I did a Titanium backup of the apps my friend wanted from the stock rom and tried to install SlimKat in the stock Rom. It worked but it didn't wipe the internal SD card and do a clean flash like I expected it to do. Also once the phone came back I could not see the internal or external SD card on my pc to move all of the backups back over to it. What am I doing wrong here?
1. how can I get the internal memory to show back up when connected to my PC? It worked fine before.
2. how can I do a complete fresh install where it wipes the internal memory card totally?
Thanks for any help, I'm totally lost on this device.
Thanks,
Dave
What I would do. Move ROM zip to SD card as well as any other zips you plan to install. Wipe all on stock slot except SD card and then reinstall this should reset all the data and make the internal visible again as it was hidden through some error and wipe it in the process. Be sure you have a working ROM on the SD card to flash before doing the wipe as you need something to boot to afterward otherwise you will have no OS. Best of luck
DROID RAZR MAXX CM 11 JBX KERNEL
This was my first time rooting an S4. I installed safestrap and installed Hyperdrive rom. My issue is that my internal storage is completely full. It says that misc files is taking up 15gb of space and it's system memory.
KSprec said:
This was my first time rooting an S4. I installed safestrap and installed Hyperdrive rom. My issue is that my internal storage is completely full. It says that misc files is taking up 15gb of space and it's system memory.
Click to expand...
Click to collapse
I'm in the same boat. Trying to find out if I can install HyperDrive over the Stock ROM without bricking the phone. I'm hoping that will free up a lot of space as I would need to wipe the slot prior to installing. Just a little worried about doing it.
One thing I did do was boot into Stock and remove all apps, updates, and as much stuff as I could. This didn't have any effect on the loss of space. I know that while digging through posts on these forums I saw a lot of outrage when the S4 first came out about all the bloatware that took up a good 6gigs of space on a stock phone.
Also when I did the backup of the Stock ROM onto the SD card, I made sure that I moved it off the SD Card and onto an external Hard Drive for safe keeping and to free up some space on my SD Card. I also deleted the HyperDrive install as well since it is 1.xGigs of space on the SD card.
Sorry I don't have anything really to contribute, but would be interested in hearing if you find a way to free up some space as well.
I run all of my roms in stock slot because of that very reason. I have a stock rooted backup I keep on my computer so it doesn't accidentally get deleted from SD card and to also save space on my external. I haven't had any problems at all with running any tw based custom roms in the stock slot. Just make sure your base is compatible with the roms you flash. HD15 requires mj7 or mk2 just do like normal and flash the modules after the install and before booting into the rom.
Profit and enjoy the extra space [emoji1][emoji106]
Sent from my SCH-I545 using Tapatalk
The best way to do this is to Odin to stock, root, install safestrap, copy System/lib/modules folder to ext SD or comp. Back up stock slot in safe strap recovery. Then wipe stock slot and flash hyperdrive 15 and mk2 or mj7 (according to your build) modules. Reboot then replace system/lib/modules with the one you copied from stock and Fix it's permissions.
---------- Post added at 01:35 AM ---------- Previous post was at 01:27 AM ----------
klabit87 said:
I run all of my roms in stock slot because of that very reason. I have a stock rooted backup I keep on my computer so it doesn't accidentally get deleted from SD card and to also save space on my external. I haven't had any problems at all with running any tw based custom roms in the stock slot. Just make sure your base is compatible with the roms you flash. HD15 requires mj7 or mk2 just do like normal and flash the modules after the install and before boring into the rom.
Something that will save plenty of time would be to backup your slot 1 and wipe your stock slot then restore your hd15 backup of slot 1 and restore it to the stock slot and flash kernel modules for good measure. Delete slot 1.
Profit [emoji1][emoji106]
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Your post confuses me. I tried flashing hyperdrive to stock then modules, and i had no wifi. And this is directly from hashcodes safestrap thread
.*DON'T RESTORE A CUSTOM ROM-SLOT BACKUP TO THE STOCK ROM. THIS WILL MOST LIKELY BRICK YOUR PHONE.
The only way I've had it work is the method I posted above.
Have you successful restored a tw custom rom to stock slot or are you just assuming it will work?
gnubian said:
The best way to do this is to Odin to stock, root, install safestrap, copy System/lib/modules folder to ext SD or comp. Back up stock slot in safe strap recovery. Then wipe stock slot and flash hyperdrive 15 and mk2 or mj7 (according to your build) modules. Reboot then replace system/lib/modules with the one you copied from stock and Fix it's permissions.
---------- Post added at 01:35 AM ---------- Previous post was at 01:27 AM ----------
Your post confuses me. I tried flashing hyperdrive to stock then modules, and i had no wifi. And this is directly from hashcodes safestrap thread
.*DON'T RESTORE A CUSTOM ROM-SLOT BACKUP TO THE STOCK ROM. THIS WILL MOST LIKELY BRICK YOUR PHONE.
The only way I've had it work is the method I posted above.
Have you successful restored a tw custom rom to stock slot or are you just assuming it will work?
Click to expand...
Click to collapse
Ah. Gotcha. I must have just gotten lucky then haha.
I will omit that so nobody runs into that.
I did restore from slot 1 to stock. But what I did was backup slot 1, wipe everything on stock slot, restore backup to stock slot then flash modules.
Like I said though I must have gotten lucky.
But why would you want to copy the files in the lib folder? Isn't that the same as flashing the modules before booting into the rom?
Sent from my SCH-I545 using Tapatalk
klabit87 said:
Ah. Gotcha. I must have just gotten lucky then haha.
I will omit that so nobody runs into that.
I did restore from slot 1 to stock. But what I did was backup slot 1, wipe everything on stock slot, restore backup to stock slot then flash modules.
Like I said though I must have gotten lucky.
But why would you want to copy the files in the lib folder? Isn't that the same as flashing the modules before booting into the rom?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
All I know is that I tried just flashing modules and wifi wouldn't even turn on. When I researched it the solution above is the one I found.
k1mu said:
Here's what you do to recover your Wifi.
First, if you didn't overwrite the stock slot:
1. Boot your stock slot.
2. Copy the two files in /system/lib/modules to your EXTERNAL sdcard.
3. Boot the custom slot.
4. Use your favorite root file manager to mount /system read-write, then copy those files from the external sdcard into /system/lib/modules in your custom slot.
5. Reboot. Wifi should be back.
Second, if you flashed over the stock slot: :crying:
Well, you've written over the factory modules. You'll need to get them back.
A. Find someone with the same device as you that's unmodified and ask them for the contents of /system/lib/modules. Copy them to your /system/lib/modules.
B. Remove Safestrap and install a factory stock ROM. You can now use Safestrap to flash into a different slot and use the directions above.
If you INSIST on flashing over the factory ROM again (i.e. you haven't learned why that's a bad idea), then copy off the files to your external sdcard before you install Safestrap, then go to step 4 above after you finish flashing the custom ROM.
C. Take apart a factory ROM image and extract the contents of the /system/lib/modules directory onto your external sdcard. Go to step 4 above.
Click to expand...
Click to collapse
Hmm. Well that is good to know for future flashes. I guess I probably wouldn't have been looking for a solution like that unless I had that problem.
Sent from my SCH-I545 using Tapatalk
klabit87 said:
Hmm. Well that is good to know for future flashes. I guess I probably wouldn't have been looking for a solution like that unless I had that problem.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Like you said, you were lucky. Because if the module zip were the same, why would one need to get the unmodified one from a stock rom rather than downloading the one from the safestrap thread? I'm guessing the module zip is meant to work on rom slots and not the stock. Idk how yours worked, but to the OP : flashing to stock slot is not recommended by hash and you won't get any support/help from him as he states in his thread, so proceed at your own risk. But the above method has worked for me and others . Good luck.
gnubian said:
Like you said, you were lucky. Because if the module zip were the same, why would one need to get the unmodified one from a stock rom rather than downloading the one from the safestrap thread? I'm guessing the module zip is meant to work on rom slots and not the stock. Idk how yours worked, but to the OP : flashing to stock slot is not recommended by hash and you won't get any support/help from him as he states in his thread, so proceed at your own risk. But the above method has worked for me and others . Good luck.
Click to expand...
Click to collapse
Yeah. I have the patience to work with it. Plus I been with safestrap since it first came out for the razr so I knew what I was getting into when I unfortunately had to do a warranty claim on my mdk due to a faulty touch screen digitizer.
If I get it screwed up too bad I just start over with Odin.
Sent from my SCH-I545 using Tapatalk
Flashed HyperDrive RLS15 over the stock ROM this morning. Flashed the Modules before reboot and after install. Only issue I had was TouchWiz Home crashing on occasion, but a kindly soul on here told me it looked like it was an issue associated with restoring data. Although I didn't restore data, I also chose to just flash over the Stock ROM and use the installers Wipe/Factory Reset option instead of wiping the ROM slot first. All I had to do was boot into recovery with SafeStrap and Wipe the new ROM, reboot, and good to go.
Oh, and the free space on the device using the flashed Stock ROM is now close to 6Gigs! Oh the Glory! Gonna give everything a few days and if it all remains good to go, I'll delete the RLS14 ROM and maybe try some other ROM's out, now that I have room.
McTerry said:
Flashed HyperDrive RLS15 over the stock ROM this morning. Flashed the Modules before reboot and after install. Only issue I had was TouchWiz Home crashing on occasion, but a kindly soul on here told me it looked like it was an issue associated with restoring data. Although I didn't restore data, I also chose to just flash over the Stock ROM and use the installers Wipe/Factory Reset option instead of wiping the ROM slot first. All I had to do was boot into recovery with SafeStrap and Wipe the new ROM, reboot, and good to go.
Oh, and the free space on the device using the flashed Stock ROM is now close to 6Gigs! Oh the Glory! Gonna give everything a few days and if it all remains good to go, I'll delete the RLS14 ROM and maybe try some other ROM's out, now that I have room.
Click to expand...
Click to collapse
glad you got it figured out. Good luck.
Hi there,
I'm very happy with my BMM however I noticed that I am part of a minority for some reason. Anyone knows why?
Further more, it seems that most tutorials to install nightly releases are mostly done for Safestrap. I really like my BMM and had a look at Safestrap but it does not seems very appealing to me. Should I consider to switch from BMM anyway?
Is Safestrap better than BMM? What good reasons would I have to switch, apart from the fact that its a software that has more spread.
Thanks in advance.
Vonz
vonz33 said:
Hi there,
I'm very happy with my BMM however I noticed that I am part of a minority for some reason. Anyone knows why?
Further more, it seems that most tutorials to install nightly releases are mostly done for Safestrap. I really like my BMM and had a look at Safestrap but it does not seems very appealing to me. Should I consider to switch from BMM anyway?
Is Safestrap better than BMM? What good reasons would I have to switch, apart from the fact that its a software that has more spread.
Thanks in advance.
Vonz
Click to expand...
Click to collapse
Had been on BMM for a very long time while running stock ROM. When I finally decided I wanted KK and options opened up in the custom kernel area to keep hdmi, I finally flashed slimkat and JBX to slot2. After about three days, I switched recoveries to safestrap and didn't look back.
It isn't that I didn't like BMM or to say BMM is a bad recovery or didn't serve it's purpose. The main reasons were that:
1. I ran out of space fast with slot1&2 loaded up, and I couldn't find a way of repartitioning the sd card with BMM. So I would have to go to slot3 to not run into "running out of space" issues since that would not run off the system side of the sd card. Not a big deal except sometimes I need the space.
2. I didn't want two or more ROM's on my phone, I had already had a good setup with SlimKat and JBX so, I didn't use, or even want the stock ROM anymore, but can run into trouble trying to flash them into slot 1 of BMM, while you can flash to slot1 on safestrap with no problems at all.
3. You CAN repartition the sd card with Safestrap so if I did decide I wanted another ROM, I could repartition my sd card to better accomodate my ROM's and apps, and not have to worry about losing space again.
TL : DR I was going to have to make sacrifices or accomodation's to keep BMM around so it is safestrap for me Maybe I am lazy, maybe not, but either way it is right in front of my face with safestrap, with BMM I did some digging, didn't find, lost interest and flashed!
Well,I don't think that SS is better because SS takes free space from internal memory for second slot.
In BMM second slot is on webtop partition,so you have your full 8gb available.
Sent from my Razr XT910
welder73 said:
Well,I don't think that SS is better because SS takes free space from internal memory for second slot.
In BMM second slot is on webtop partition,so you have your full 8gb available.
Sent from my Razr XT910
Click to expand...
Click to collapse
Ahh, I agree, and disagree. Yes BMM will put the second slot on top of the webtop partition, but that is only 1.3 gb if I am correct. One ROM and a few bulky apps/games, and slot2 is filled up. You once again get insufficient space toasts, even with another 2 gigs sitting on your card, because your system partition is filled up(slot 2 apps go into the slot2 partition which was webtop.) Sure you can swap back and forth between ROM's for various things but, some people don't want to have to swap between 2 ROM's for all their apps to accommodate a recoveries limitations that doesn't suit them.
And also remember some of that 8 gigs is cache, so we really never get to use it for our own purposes anyways, it is for the system.
Safestrap you can flash to the stock slot, and you can reconfigure the partitions to accomodate any other slots so that you don't get insufficient storage issues. Does it use internal memory, yes it does, but then again, that is the best source for unhindered space, and the phone does have ext. card capabilities so it isn't putting near the burden on us as, say, it would a nexus device.
Just my opinion, and I have nothing against BMM, it was a great recovery! It just doesn't suit my needs anymore.
Draxin said:
Ahh, I agree, and disagree. Yes BMM will put the second slot on top of the webtop partition, but that is only 1.3 gb if I am correct. One ROM and a few bulky apps/games, and slot2 is filled up. You once again get insufficient space toasts, even with another 2 gigs sitting on your card, because your system partition is filled up(slot 2 apps go into the slot2 partition which was webtop.) Sure you can swap back and forth between ROM's for various things but, some people don't want to have to swap between 2 ROM's for all their apps to accommodate a recoveries limitations that doesn't suit them.
And also remember some of that 8 gigs is cache, so we really never get to use it for our own purposes anyways, it is for the system.
Safestrap you can flash to the stock slot, and you can reconfigure the partitions to accomodate any other slots so that you don't get insufficient storage issues. Does it use internal memory, yes it does, but then again, that is the best source for unhindered space, and the phone does have ext. card capabilities so it isn't putting near the burden on us as, say, it would a nexus device.
Just my opinion, and I have nothing against BMM, it was a great recovery! It just doesn't suit my needs anymore.
Click to expand...
Click to collapse
I agree,everyone has different needs,for me it's enough 1.3gb.
But what do you mean by "you can flash to the stock slot",you can do it with BMM also?
Sent from my Razr XT910
welder73 said:
But what do you mean by "you can flash to the stock slot"
Sent from my Razr XT910
Click to expand...
Click to collapse
I guess I didn't complete the comment as I did in the previous post. The stock slot can be flashed in BMM but problems can arise. At least they did for me. It wasn't for a lack of trying but, when I was done and rebooted, I got logo, hijack, and then blank, twice! First time restored stock slot and redownloaded ROM, second time ended up being a firmware reflash.
I am not above saying I did something wrong, I probably did, but heck if I know what it was, I had no problem flashing slot2, and have had zero issues with safestrap. Same download of ROM and Gapps that were used in second flash was used in slot2 BMM and Safestrap. So I am not going to say BMM CAN'T do it, I am just not going to say it can when I couldn't do it successfully.
So I retained from previous comments that SS could help with saving memory? Correct? If so that is definitely interesting. Further more BMM is discontinued development am I right?
I will give SS a go and see what happens (even though the interface is not as schmick as BMM, oh well..!) .
So in order to switch from BMM to SS I shall save my stock ROM that is on slot 1 and my CM10 that is on slot 2, then uninstall BMM from settings/apps menu, then install SS, reboot in SSR and install CM11 from zip file correct?
Cheers.
ttt
vonz33 said:
So I retained from previous comments that SS could help with saving memory? Correct? If so that is definitely interesting. Further more BMM is discontinued development am I right?
I will give SS a go and see what happens (even though the interface is not as schmick as BMM, oh well..!) .
So in order to switch from BMM to SS I shall save my stock ROM that is on slot 1 and my CM10 that is on slot 2, then uninstall BMM from settings/apps menu, then install SS, reboot in SSR and install CM11 from zip file correct?
Cheers.
Click to expand...
Click to collapse
Yes BMM does seem to have discontinued development. Doesn't mean Boot menu manager right now isn't good, just means there probably won't be any more improvement.
As for saving space, no, safestrap doesn't do that. When you install a second slot in BMM it will install it on top of the webtop partition(read and watch your tutorial's on how to do this correctly.) So it isn't taking any extra space yet, the downside to that is that it is limited to 1.3gb. If you don't use alot of apps, or going to be using it strictly for testing ROM's, then it isn't a big deal. Any more slots after that eats into your internal storage.
Safestrap from what I understand, won't install a slot on top of webtop, instead, when you install to slot 1 it will be taking space from your internal storage right off the bat. You can choose from 1gb, 2gb, or 3gb, size for your new slot partition. Same for any more slots you make. The more space you take for one slot partition, the less you leave for any others you would make. From what I understand though, with safestrap, you CAN still remove webtop for stock slot (I haven't needed to yet) so the 1.3 gb is freed up for more storage to stock.
As welder and I had discussed prior, it completely depends on your needs. If you don't have alot of apps, and want to dual boot a stock ROM and a custom one... BMM will do you fine. If you have a lot of apps or games and want to dual boot both ROMS with both of them loaded up, then safestrap is the way to go. Some ROM's play well with one recovery but not the other, there are also work arounds in some cases.
Any of your backups from one will not work with the other
Draxin said:
Yes BMM does seem to have discontinued development. Doesn't mean Boot menu manager right now isn't good, just means there probably won't be any more improvement.
As for saving space, no, safestrap doesn't do that. When you install a second slot in BMM it will install it on top of the webtop partition(read and watch your tutorial's on how to do this correctly.) So it isn't taking any extra space yet, the downside to that is that it is limited to 1.3gb. If you don't use alot of apps, or going to be using it strictly for testing ROM's, then it isn't a big deal. Any more slots after that eats into your internal storage.
Safestrap from what I understand, won't install a slot on top of webtop, instead, when you install to slot 1 it will be taking space from your internal storage right off the bat. You can choose from 1gb, 2gb, or 3gb, size for your new slot partition. Same for any more slots you make. The more space you take for one slot partition, the less you leave for any others you would make. From what I understand though, with safestrap, you CAN still remove webtop for stock slot (I haven't needed to yet) so the 1.3 gb is freed up for more storage to stock.
As welder and I had discussed prior, it completely depends on your needs. If you don't have alot of apps, and want to dual boot a stock ROM and a custom one... BMM will do you fine. If you have a lot of apps or games and want to dual boot both ROMS with both of them loaded up, then safestrap is the way to go. Some ROM's play well with one recovery but not the other, there are also work arounds in some cases.
Any of your backups from one will not work with the other
Click to expand...
Click to collapse
Thanks for your reply, Draxin.
Which one are you using? I take it you are using BMM. You are talking about a tutorial.... this is A thing I could not find. Let me know if there is one, and if so where I can get it from.
My main concern is that I wanted to give a shot to CM11 and it seems that the install is not 100% reliable, even with the BMM workaround. So maybe I shall wait for a release candidate to occur.
I have 80 user apps apparently under CM10 according to Titanium Backup, is that a lot?
Also you talk about this webtop thing... After some research it appears that a webtop is a desktop integrated in a web browser. What does it have to do with android platform more exactly?
I mostly have 2 used slots, Official Moto ROM on slot 1 (just in case but never use it) and CM10 on slot 2 as it was advised on a youtube video. If I have to test a kexec ROM I usually backup my CM10 and try it out on slot 2, to avoid munching all the space on side storage.
So what do you recommend for us at this stage?
Thanks in advance.
Vz
vonz33 said:
Thanks for your reply, Draxin.
Which one are you using? I take it you are using BMM. You are talking about a tutorial.... this is A thing I could not find. Let me know if there is one, and if so where I can get it from.
My main concern is that I wanted to give a shot to CM11 and it seems that the install is not 100% reliable, even with the BMM workaround. So maybe I shall wait for a release candidate to occur.
I have 80 user apps apparently under CM10 according to Titanium Backup, is that a lot?
Also you talk about this webtop thing... After some research it appears that a webtop is a desktop integrated in a web browser. What does it have to do with android platform more exactly?
I mostly have 2 used slots, Official Moto ROM on slot 1 (just in case but never use it) and CM10 on slot 2 as it was advised on a youtube video. If I have to test a kexec ROM I usually backup my CM10 and try it out on slot 2, to avoid munching all the space on side storage.
So what do you recommend for us at this stage?
Thanks in advance.
Vz
Click to expand...
Click to collapse
I am using safestrap now, I had been using BMM for a while til I started flashing custom ROM's. After that safestrap suited MY needs better
BMM tutorials: http://forum.xda-developers.com/showthread.php?t=2325764
CM11 requires safestrap 3.65 http://forum.xda-developers.com/showthread.php?t=1391900
If you really want to try out CM11, and then it doesn't live up to your expectations, you can always go back to BMM and restore the backups you saved to where you are right now. SlimKat I know for a fact will install with BMM. You just have to make sure to completely uninstall whatever recovery you had previously, before adding a new one
It doesn't matter so much how many apps you have, as, how much space they take up. If you are just taking a ROM for a test run, you don't need all your apps, especially if you are dual booting, if you are going to use slot 2 as a daily driver, and they are bulky apps, that is when you get concerned.
Webtop, basically allows you to explore your phone as if it were a desktop computer, bluetooth keyboard, and the phone's touchscreen will act as a laptop touch pad, or you can run a bluetooth mouse, and using a typical tv with hdmi in as a moniter. Motorola thought it would be a bigger hit than it turned out to be. It really is a neat idea, turning your phone into a handheld desktop but, it has plenty of limitations. For most people, if they even know what it is, it's just taking up space.
What do I recommend? Well, it completely depends on what you are looking to do. Like I said before bro, you can save what you have with BMM, uninstall it and try out safestrap. If you don't like it, uninstall safestrap and go back to BMM and reinstall your backups, no harm, no foul. If you really like safestrap, then dump your BMM backups as they are just taking up space at that point. With titanium backup, as long as you saved your apps and modified data, call logs, wifi, and sms, really all you cost yourself in the switch, is time setting everything back up.
If I helped, hit the thanks.
Cool bro.
Will try ST to see what happens. Thanks again you're a true gentleman.