Hello I have problem with flash phone, when I try flash it from SPFT v3 and v5 I have error "enable dram failed". Drivers work fine, I have plug my thl w200 without battery, in system appears pre- loader but when I plug cubot without battery system appears only MTK USB VCOM. In Cubot screen is only black, and nothing is appears. Chip is MTK6589T. Can anybody help me?
Sent from my THL W200 using xda app-developers app
I have the same problem. Flash the wrong preloader I think.... because is full bricked nothing show up on the screen.
I tried some tutorials from some sites but not exactly for Cubot One, coz i did't find any so far exactly for Cubot One. Maybe some guys from here will give us some help with this.
Regards
Thanks
Did you tried this rom?
jacus616 said:
Hello I have problem with flash phone, when I try flash it from SPFT v3 and v5 I have error "enable dram failed". Drivers work fine, I have plug my thl w200 without battery, in system appears pre- loader but when I plug cubot without battery system appears only MTK USB VCOM. In Cubot screen is only black, and nothing is appears. Chip is MTK6589T. Can anybody help me?
Sent from my THL W200 using xda app-developers app
Click to expand...
Click to collapse
Did you tried this rom:
www_needrom_com/mobile/cubot-one-turbo/
Change _ with .
The rom seems to work, but i had an issue of black screen with backlight on. So, i connected to PC, and i can view the screen of the device with androidscreencast (code_google_com/p/androidscreencast), but i do not know if my screen has a failure or if the rom has a failure.
New Cubot
It appears to be a new version of cubot one in the market, i found some posts about a blackscreen issues with the stock firmware 0.8, but the phone boots normally, even can recieve calls and connect to internet. Perhaps is a lcm driver issue?
new thread
see my new post http://forum.xda-developers.com/chef-central/android/rom-cubot-one-t2829092/post54419073
Related
I have just received my Iocean X7 Elite and was about to install a new rom. I had successfully rooted the device and then was trying to flash
the recovery with SP Flash Tool.
After the recovery flashed my phone refuses to turn on I believe its somehow bricked but have no idea how this could have happened. I did
format flash i only downloaded the recovery to the device.
In Device Manager when i plug the phone it it either shows up as 'DA USB VCOM Port' or 'MTK USB Port'.
When I try to use SP Tool to flash the stock Rom back onto the device I get an error saying 'BROM ERROR : S_FT_ENABLE_DRAM_FAIL(4032)'
I have no idea what to do next can someone help me.
I have tried what this thread suggests:
bump
same as u..but differ phone model.(N9589)
had a few upgrd...til the recent brick it.
Tried a few version of flash tool and still the same
Joshafc said:
I have just received my Iocean X7 Elite and was about to install a new rom. I had successfully rooted the device and then was trying to flash
the recovery with SP Flash Tool.
After the recovery flashed my phone refuses to turn on I believe its somehow bricked but have no idea how this could have happened. I did
format flash i only downloaded the recovery to the device.
In Device Manager when i plug the phone it it either shows up as 'DA USB VCOM Port' or 'MTK USB Port'.
When I try to use SP Tool to flash the stock Rom back onto the device I get an error saying 'BROM ERROR : S_FT_ENABLE_DRAM_FAIL(4032)'
I have no idea what to do next can someone help me.
I have tried what this thread suggests:
Click to expand...
Click to collapse
Same problem here - tried to install stock firmware and got this error...
these are common problems when flashing MT65xx based phones,
ie : error 4008, 4xxx, 5xxx whatever those codes mean, no explanation after extensive search on google.
once I managed to flash this one phone successfully, but I don't know exactly what I did.
as long as I recall, I tried to delete the whole flashtool folders, re-extract them, let the phone cool down a bit
and oh, try to press volume up, or down button (varies on devices) while connecting to USB, once the flashing progress bar starts, release the button.
In the flashtool option, at the OPTIONS-->DA DOWNLOAD ALL-->, check WITHOUT BATTERY.
and in the option, DA DOWNLOAD ALL--> SPEED, check DO NOT SWITCH SPEED.
try flashing your phone without battery inserted, it works many times for me.
NOTE : BEWARE, flashing your MTK65xx based phone, sometimes this tool tried to REMOVE YOUR PHONE's IMEI information, so take caution !
I haven't managed how to prevent IMEI removal when flashing those phones, because I'm not a developer.
Hope this helps.
tukulll said:
these are common problems when flashing MT65xx based phones,
ie : error 4008, 4xxx, 5xxx whatever those codes mean, no explanation after extensive search on google.
once I managed to flash this one phone successfully, but I don't know exactly what I did.
as long as I recall, I tried to delete the whole flashtool folders, re-extract them, let the phone cool down a bit
and oh, try to press volume up, or down button (varies on devices) while connecting to USB, once the flashing progress bar starts, release the button.
In the flashtool option, at the OPTIONS-->DA DOWNLOAD ALL-->, check WITHOUT BATTERY.
and in the option, DA DOWNLOAD ALL--> SPEED, check DO NOT SWITCH SPEED.
try flashing your phone without battery inserted, it works many times for me.
NOTE : BEWARE, flashing your MTK65xx based phone, sometimes this tool tried to REMOVE YOUR PHONE's IMEI information, so take caution !
I haven't managed how to prevent IMEI removal when flashing those phones, because I'm not a developer.
Hope this helps.
Click to expand...
Click to collapse
Thank you for your reply, but this doesn't help... ;(
Anyone?
I think I figured out that the error above means you are trying to flash an incorrect ROM. Make sure you are using the right one and also make sure you're using the latest version of sp flash tool.
Once I downloaded a later version of the flash tool it began installing the ROM but then a different error appeared.
So I formatted the nand with the sp flash tool.
Then I flashed the stock ROM again and it worked
Formatting it seemed to make the errors go away even though its advised not to do so.
Sent from my iOCEAN X7 using xda app-developers app
vessk0 said:
Anyone?
Click to expand...
Click to collapse
I fixed this error by completely removing and reinstalling other drivers for mtk vcom loader
anyone heard Iocean will recall all of the x7 elite's? i've had a mail today they should do it, but i don't know if it's true or not.
Schumi_wk said:
anyone heard Iocean will recall all of the x7 elite's? i've had a mail today they should do it, but i don't know if it's true or not.
Click to expand...
Click to collapse
I haven't heard about that. Maybe its a fake email. Did it say what the fault was?
Joshafc said:
I think I figured out that the error above means you are trying to flash an incorrect ROM. Make sure you are using the right one and also make sure you're using the latest version of sp flash tool.
Once I downloaded a later version of the flash tool it began installing the ROM but then a different error appeared.
So I formatted the nand with the sp flash tool.
Then I flashed the stock ROM again and it worked
Formatting it seemed to make the errors go away even though its advised not to do so.
Sent from my iOCEAN X7 using xda app-developers app
Click to expand...
Click to collapse
How to format the nand with sp flash tool, I use the latest version?
And can you point me to good original stock ROM?
Thank you!
lolet said:
I fixed this error by completely removing and reinstalling other drivers for mtk vcom loader
Click to expand...
Click to collapse
I tried reinstalling drivers, also tried other drivers, but this doesn't help...
I've had the same problem with the following installation Sp Tools
SP_Flash_Tool_exe_v3.1316.0.150
Rom: MP_mt89_v9_iocean_ousheng_jb2_20130520-184014_zhongyeqing_PC
http://d-h.st/ESX
Iocean X7 Youth
I don't have the same problem but i flashed the latest version of official rom for iOcean x7 Youth : 03 july 2013 : and wtf no more internal sdcard only the rom stockage. So i can't download anything, i can't use camera .
On the official website, I read that before flashing the 20 may 2013 rom one and the 03 July 2013 one, your baseband version have to be 23/04 or higher( you have to flash the 23/04 official rom first). This is only avalaible for the YOUTH version.
So tomorrow i will try what i said below to see if i have internal sd card again.
noob question::: since the iocean x7 young and turbo are the same phones...only different clock rates...will flashing the firmware for turbo on iocean x7 young work??assuming that the mtk6589T and mtk6589 are the same chipset only different clock rates??
Micromax A116 (Cant flash Rom)Brick Problem Solved
tukulll said:
these are common problems when flashing MT65xx based phones,
ie : error 4008, 4xxx, 5xxx whatever those codes mean, no explanation after extensive search on google.
once I managed to flash this one phone successfully, but I don't know exactly what I did.
as long as I recall, I tried to delete the whole flashtool folders, re-extract them, let the phone cool down a bit
and oh, try to press volume up, or down button (varies on devices) while connecting to USB, once the flashing progress bar starts, release the button.
In the flashtool option, at the OPTIONS-->DA DOWNLOAD ALL-->, check WITHOUT BATTERY.
and in the option, DA DOWNLOAD ALL--> SPEED, check DO NOT SWITCH SPEED.
try flashing your phone without battery inserted, it works many times for me.
NOTE : BEWARE, flashing your MTK65xx based phone, sometimes this tool tried to REMOVE YOUR PHONE's IMEI information, so take caution !
I haven't managed how to prevent IMEI removal when flashing those phones, because I'm not a developer.
Hope this helps.
Click to expand...
Click to collapse
Thanks a lot. My Micromax a116 was brick. Now its alive.
Here I am with the same problem in a N920e... AND IT'S NOT MINE! :crying:
I'll have to pay it to the owner if I can't solve this:
DaniPhii said:
Here I am with the same problem in a N920e... AND IT'S NOT MINE! :crying:
I'll have to pay it to the owner if I can't solve this:
View attachment 2243401
Click to expand...
Click to collapse
Clearly: Wrong driver. I had also this error. SPflash tool did not readback. I did not flash anything! I fixed this by showing the nonpresent devices in devicemanagement (google for show nonpresent devices for explanation)
Go to com ports, and delete all mediatek drivers except preloader driver. Now start over. It can help if you choose the same usb port where you had success last time.
SP flash tool shows in the statusbar which driver it is using.
mistraller said:
Clearly: Wrong driver. I had also this error. SPflash tool did not readback. I did not flash anything! I fixed this by showing the nonpresent devices in devicemanagement (google for show nonpresent devices for explanation)
Go to com ports, and delete all mediatek drivers except preloader driver. Now start over. It can help if you choose the same usb port where you had success last time.
Click to expand...
Click to collapse
Yes, you got it
SP Flash Tool couldn't find my phone, but now it works
It's exactly a windoze driver problem.
Going to devicemanagement, in LAN-Devices I a had an Alcatel device,
chosing driver by hand and use the mtk usb driver, now Flashtool finds the phone
Thanks a lotttttttt....
shiv.kbh said:
Thanks a lot. My Micromax a116 was brick. Now its alive.
Click to expand...
Click to collapse
Thanks a lot man i unbricked my bolt a58 with this...thanks thanks...
Hello, I dont know if this is the right place to get help. I'm new here, i really need help. Because my Lenovo A369i can't turn on, maybe bricked or something. I will tell what did i exactly do until my phone get like this.
I have ROOTED my Lenovo A369i , no backups and no nothing.
Well the thing is, i found an app named Uninstaller Pro last friday , i downloaded it since i want to remove unnecessary things in my phone. So i tried removing an app, removed success but something popped up and the pop up said things that i dont even understand, something like chinese writing. Then i press Home, i tried to install the App back but i can't then i reboot my phone. ): It stays on the Lenovo LOGO. I do can't anything, i already tried reboot but still the same. I already test to factory reset in my phone Recovery, still the same. So i googled about how to repair my phone, i see this website ~> LenovoA369i Blogspot *GOOGLE IT* / I cant put the website. I followed this website How To Update, I don't know anything i just followed its guide. Then i tried , after doing it nothing happens. Then i can't even reboot, go to Recovery mode.
Can anyone help me with this PROBLEM !! Please help me find a solution.
My Phone
Lenovo A369i 4.2.2 OS JB
I forgot the ROW thing, maybe its Lenovo A369i ROW S201 if im not mistaken
Download the firmware first from lenovo. Blogspot, search for the a369i s108, Then download the latest sp flash tool and follow the methods by typing : how to flash lenovo a369i... U can find it here
Sent from my Lenovo A369i using XDA Free mobile app
---------- Post added at 04:12 AM ---------- Previous post was at 03:56 AM ----------
http://forum.xda-developers.com/showthread.php?p=55744573
Sent from my Lenovo A369i using XDA Free mobile app
AnonymousV3 said:
Hello, I dont know if this is the right place to get help. I'm new here, i really need help. Because my Lenovo A369i can't turn on, maybe bricked or something. I will tell what did i exactly do until my phone get like this.
I have ROOTED my Lenovo A369i , no backups and no nothing.
Well the thing is, i found an app named Uninstaller Pro last friday , i downloaded it since i want to remove unnecessary things in my phone. So i tried removing an app, removed success but something popped up and the pop up said things that i dont even understand, something like chinese writing. Then i press Home, i tried to install the App back but i can't then i reboot my phone. ): It stays on the Lenovo LOGO. I do can't anything, i already tried reboot but still the same. I already test to factory reset in my phone Recovery, still the same. So i googled about how to repair my phone, i see this website ~> LenovoA369i Blogspot *GOOGLE IT* / I cant put the website. I followed this website How To Update, I don't know anything i just followed its guide. Then i tried , after doing it nothing happens. Then i can't even reboot, go to Recovery mode.
Can anyone help me with this PROBLEM !! Please help me find a solution.
My Phone
Lenovo A369i 4.2.2 OS JB
I forgot the ROW thing, maybe its Lenovo A369i ROW S201 if im not mistaken
Click to expand...
Click to collapse
Flash stock rom using SP Flash Tool
download the firmware then flash it with sp flash tools.
Im Also Having Same Problem Maybe Even So Terible [sorry for my english]
Before This Happen,I like to modding my lenovo a369i with xposed framework modules and like to changing fonts for my phone,everything works fine until i have change my fonts to some of unsupported fonts that i get it from the internet,then after i reboot its come to bootloop,without thinking anything I go to recovery mode and then i make HARD RESET,and then i think it will okay,until then its still nothing happens,so i search trough the internet looking for the best way and found someway like flashing the stock rom for lenovo a369i and then i download this file: Lenovo A369i_ROW_S110_140108 and start flashing likethey doing,everything works fine,they load the pink-purple bars and go to green and yellow and then its pop out some green circle,i think its done but after that when im going to turn it on,NOTHING HAPPENS OR LIGHTS UP.....:crying: now i dont know what im gonna do,try to flash its back but now its says,BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
i know it become like that because of the driver,its no longer Mediatek VCOM PORT,its become MTK USB PORT (COM5), i also read some threads they post that is the way to fix it by pressing the vol down button or the volume down + power button or vice versa and yes its working and show the MediaTek DA VCOM PORT but sometims its also show Unknown Device,I try to update it with the given lenovo driver but its say that it have been up to date....
PLEASE SOMEONE HELP ME RECOVER THIS :crying:
MAY GOD BLESS THEM THAT HELP ME
THE POOR MAN
MH1368
Brom error!!
mh1368 said:
Before This Happen,I like to modding my lenovo a369i with xposed framework modules and like to changing fonts for my phone,everything works fine until i have change my fonts to some of unsupported fonts that i get it from the internet,then after i reboot its come to bootloop,without thinking anything I go to recovery mode and then i make HARD RESET,and then i think it will okay,until then its still nothing happens,so i search trough the internet looking for the best way and found someway like flashing the stock rom for lenovo a369i and then i download this file: Lenovo A369i_ROW_S110_140108 and start flashing likethey doing,everything works fine,they load the pink-purple bars and go to green and yellow and then its pop out some green circle,i think its done but after that when im going to turn it on,NOTHING HAPPENS OR LIGHTS UP.....:crying: now i dont know what im gonna do,try to flash its back but now its says,BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
i know it become like that because of the driver,its no longer Mediatek VCOM PORT,its become MTK USB PORT (COM5), i also read some threads they post that is the way to fix it by pressing the vol down button or the volume down + power button or vice versa and yes its working and show the MediaTek DA VCOM PORT but sometims its also show Unknown Device,I try to update it with the given lenovo driver but its say that it have been up to date....
PLEASE SOMEONE HELP ME RECOVER THIS :crying:
MAY GOD BLESS THEM THAT HELP ME
THE POOR MAN
MH1368
Click to expand...
Click to collapse
Hello mh1368,
Sorry to hear about your issue.The S_FT_ENABLE_DRAM_FAIL Occurs when you have used an unsupported scatter loading file...at this point when you click download in sp flash tool, the bootloader is cleared but due to the wrong scatterer loading file the new firmware does not get flashed leaving behind a bricked smartphone:crying:.But no need to worry its just a soft brick:laugh:.We can get your phone back to life through certain steps.Can you tell me your about your build no??
Just flash this
https://drive.google.com/file/d/0B_KxHkaDeA14QWM0QkNUZzRuMHM/edit?usp=sharing
and it will work
I also have this kind of problem in my lenovo a369i but case is that after i flash row_s108 thru SPFT , I cannot turn on my phone anymore and i tried to flash again but SPFT doesn't recognize my phone anymore.. Is there any way to fix this problem??
Any information is a big help.. Thanks In Advance
good I need help, I bought a lenovo s900 and now is supposed to be a Fake S90 +. When trying to change the ROM with another different with smtools, now no lights or display. So if when you connect and disconnect the USB if the PC recognizes it. And I tried several times but nothing putting on a ROM, I always skip the error
BROM_ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)
I think everything is erased completely even preolader please .. If you can help me or pass me the original rom stock it. The processor is leading MT6572.
Greetings hope your help
Xavier
Hi guys,
I just bought two brandnew Cube U27GT S (MTK 8127) tablets and tried to install a custom rom. Unfortunately the tab hard bricked while trying to flash it with SPFT. Now I can´t turn on the tab anymore - all black. I even can´t open the recovery mode and Win 7 doesn´t found the tab anymore, it shows unknown device in the device manager!?
Meanwhile I deinstalled all MTK drivers with usbdeview and installed them again with the help of the second tab. But it has no effect of the damaged one it´s still an unkown device.
Maybe anyone has an idea how to unbrick it? Would be great to get any help! :crying:
No hope anymore?
I have the same problem can only get into recovery, factory reset does seem to do anything still hangs on boot, looks like I need to update via sdcard?
Hi guys:crying::crying::crying:, I need to revive my tablet, try to make it root and then I do not boot, try to flash it and use a ROM Archos-101d-Neon tablet, after that no longer shows signs of life, but flashtool still recognizes it. I need the original ROM of the tablet pixi 3 (10) and to see if I can rescue her. If someone can provide me the ROM or if you can help me solve the problem I would appreciate it. I'm waiting for any help. Greetings.
alvarmat said:
Hi guys:crying::crying::crying:, I need to revive my tablet, try to make it root and then I do not boot, try to flash it and use a ROM Archos-101d-Neon tablet, after that no longer shows signs of life, but flashtool still recognizes it. I need the original ROM of the tablet pixi 3 (10) and to see if I can rescue her. If someone can provide me the ROM or if you can help me solve the problem I would appreciate it. I'm waiting for any help. Greetings.
Click to expand...
Click to collapse
I have the same problem, I readed in other posts you can use oficial program "Mobile Upgrade S 4.5.4" of alcatel to try revive your tablet. In my case it looks like working, downloaded some files but later the program dont reconogize tablet in the step 3/4 and tablet keep in boot loop.
Please someone with stock room upload it to mega or some filehostin
deceiver7 said:
I have the same problem, I readed in other posts you can use oficial program "Mobile Upgrade S 4.5.4" of alcatel to try revive your tablet. In my case it looks like working, downloaded some files but later the program dont reconogize tablet in the step 3/4 and tablet keep in boot loop.
Please someone with stock room upload it to mega or some filehostin
Click to expand...
Click to collapse
alcatel one touch pixi 3 (10) WI-FI ? or 3G ?
on 3G (9010) a lot of information
very necessary for wi-fi (8079).have on hand?
download this official updater: https://1drv.ms/u/s!AvUqW-s0ZKJvhVoy4gT1Oiynk8Av choose your model (mine was 8079 - made by TCL as stated in the box).
Hello
@calculo. The program doesn't recognize tablet in the step 3/4 and tablet keep in bootloop. I need the Stock Rom to be able to use it with Sp Flash tool. If you could upload it, I would appreciate it.
Problem solved
I found the software I was looking for (root-alcatel-one-touch-pixi-34-official-t3193624 / page258), Use Sp Flash Tool to format and update, then recharge the battery, then recharge the battery connecting a charger directly on the battery output cables and after all that my tablet resurrected. Thanks for everything.
Guys, need help pls. Got one Pixi 3 3G 10 dual sim device (9010X), went to flash it via SP tool, but it seems I bricked it. Possibly with wrong FW. Now tablet is dead, nothing on screen, but on USB connetion, computer play sound wheni iI connect it . SP and AutoUpdater tools won't recognize it. Any hope here? thanks
EDIT: I got it again recognazible by SPFT by removing the battery, It is flashable again, need correct FW, but can't find it anywhere
Guys need help please! ?
My tablet is dead! "Pixi 3 3G 10 device (8970)" nothing on screen, but on USB connetion, computer play sound when i connect it and receive a message "USB device not recognized" . SP won't recognize it. Any hope here? Thanks
Pixi 3 3G 10 device (8970)
After i tried to upgrade firmware with Mobile Upgrade S Gotu2 it didnt even pass second task only said network error my "Pixi 3 3G 10 device (8970) has nothing on screen and i recive message "USB device not recognized on my computer.
I tried with sp flash tool installed the mtk driver on win7 and on win 10 but it doesnt recognize the usb can someone pls post how to properly install drivers for sp flash
Any help is appreciated
caculo said:
download this official updater: choose your model (mine was 8079 - made by TCL as stated in the box).
Click to expand...
Click to collapse
Thank you, Thank you, Thank you ...... This worked for me after 8 hours of trying to fix my hard bricked pixi phone!:good:
Yep, I have managed to brick my pixi 3 (10). I have tried to root my device, but Kingroot failed.
Then I've tried to TWRP (https://forum.xda-developers.com/showpost.php?p=67953659&postcount=1944) and my device went to bootloop it self with garbled screen (while connected on PC i've heard device connected - device disconnected sound constantly)
And finally I've tried with this https://forum.xda-developers.com/showpost.php?p=72854696&postcount=4 and device stopped with bootloop immediately after I've clicked on Yes in dialog "To begin please confirm that your device's battery is fully charged..."
But it has stopped to boot at all, and now when I connect device to my PC I get message "USB device not recognized"...
Is there any hope, or I should use this tablet as a frisbee?
hola quisiera q alguien me alludara a saver si la rom de la tablet pixi 3 10 8080 es el mismo sistema con el 8079
alvarmat said:
Problem solved
I found the software I was looking for (root-alcatel-one-touch-pixi-34-official-t3193624 / page258), Use Sp Flash Tool to format and update, then recharge the battery, then recharge the battery connecting a charger directly on the battery output cables and after all that my tablet resurrected. Thanks for everything.
Click to expand...
Click to collapse
@alvarmat Could you provide more infomation on the battery charging part? I'm trying to unbrick a Pixi 3 8079 that won't charge, but I'm on the fence of doing something like that for fear it may damage the battery and the circuitry. Which charger did you use?
SOLUTION
Maybe it's late but i hope it helps someone
Chain 2 AA batteries in serial, end to end , connect 2 cables on both ends using electrical tape. - end ground to the metal CPU cover and + end touch solder on red wire coming from the battery for a minute and the device should turn on.
There is a guide on YT using voltmeter but I'm guessing like me you don't have one
Don't use the stupid update tool!