Ok guys, here is my big problem, i have an China S4 I9500, i want to install another ROM, but it failed ( block on boot screen )
In my desperate attempt, after several fails of flashing the original ROM back, with Sp Flash Tools, i have finally boot into Recovery CWM and restore a backup of my Note 3 Clone...
after this the phone is officially dead, is not receiving electricity when i plug it in, and also the pc do not recognized the phone anymore...
i think the problem is because i have restore boot.img, system.img and preloader.bin of another Model, in this case my China Note 3 Clone, while the device is S4 I9500 Clone.
can i revive this phone by flashing again original files ? i have a complete backup of the original ROM, but i am not able to Flash it because the phone is DEAD .
HELP Me please Guys, any effort is appreciatted
Related
*Urgent* Bricked S3(gt9300)? Accidentally wiped my s3 (in allianz rom bootloader screen) .* It then vomplrtely wouldn't work, so I used odin to put a stock rom on (via pda)* Success ! working completely fine until it lost power & will only ever get as far as the samsung logo when turned on. Need urgent diy help to get my phone working again,* I have tried a number of how-to's on fixung a bricked s3 via odin with no luck!* the error message is along the lines of no partion available & will fail no longer than 2 seconds into process. no matter what rom ; custom or stock Im unable to fix.* My guess would be that ive deleted whatever software in phone that would recognise a rom. Notes: I am competant in use of android just very good at making mistakes.* The only feature available is the download usb mode. Any help would be appreciated especially if it works, Im sure someone else has had the same problem!
Hello people.
I have KINGZONE SM-N9002 (Clone of Samsung Galaxy Note 3) MTK6582 and today I tried to install this ROM (Android 4.4 KitKat) -> needrom.com/download/am3-kk-v1-0-for-kingzone-sm-n9002 . I did everything, wiped data/cache/ everything I needed to and installed it . Then clicked on Reboot, and what happened is that my phone doesn't reach the menu, it just reboots showing the logo screen every time constantly!!!! I clicked on restore on Recovery mode, but it seems there are no files there. I tried to to reflash my ROM using this -> needrom.com/download/kingzone-sm-n9002-mt6582 but when I do it using Flash Tools, I get the error Invalid scatter file format. Please help! I'm in terrible need of my phone and since it is a clone, I will have to send it back to China and wait ages for it get back. Plus, I'm leaving for Scotland in two weeks time so I'm in desperate need of my phone. I cannot do anything!!! I have Flash Tools and MTK Droid Tools on my PC, so can you suggest anything that can save me????
I finally managed to flash my ROM using SP Flash tools but now my screen shows something like green pixels and it doesn't respond to anything!!!! It's like my display is completely "broken".... Please help!
Hello!
I have a Galaxy Note 3 phone that no longer boots after I tried a hard reset. I maybe stupidly cleared that cache and it froze during the process making me remove that battery. Now it just flashes and goes dead when connected to power or when i try switching on.
The challenge is that I don't know the chip type though its MTK. I also am not sure if its Korean or Chinese clone going by the "fake" label.
I also see this "a3_mb_v1.0." on it and dont know if it has to do with the chip. I have tried flashing with the following roms mt6582 and mt6572 both keep getting the message that the scatter file does not match the chip.
Can anyone help me with link to a rom that works?:crying:
Hello friends,
I have a smartphone Bepa - G900W ( KOT49H.G9008SKSU1AND3 ). My GPS was not working so I wanted to re-record the phone's ROM.
I used the tool SP-Flash-Tool - v.5.1532.00 I created the Read Back ROM0 and over MTK Droid tools ( v.2.5.3 ) I wanted to automatically create a recovery file . When I recorded the phone to a new recovery error occurred BROM ERROR 5007 followed by telephone or light up.
It scared me a lot! So I downloaded a custom ROM ( http://www.needrom.com/download/bepa-g900w/ ). Use the SP - v.5.1408.00 FlashTool upgrade firemwaru went well and the phone running again. The problem is that the IMEI is unknown.
They would have these information to pull data out of ROM0 what did I do? Or should I try to reload ROM?
Thanks for any idea or post! Attention amateur and I apologize for my English .
You will have to send it back or try and flash a stock rom. This is a common issue with devices that use that sub par chip.
Last night i took the oportunity to flash my device with stock rom it, but didn't observed the important info that my device version is with 8 gb storage and the flash firmware was for the version with 16 gb storage. So now my phone is bricked. SP flash tool is still the option to revive it back to life, but i haven't the needed flash files for my version - 8 gb storage. Please help
up
up
Up
Up
hello
here is the stock firmware rom all are looking for i upload it for xda members , my phone WAS BRIKE DEAD,its work and phone start up , charging , recovery , everything ok , but hang on first boot , , ,when you chose language and contrary its hang on welcome logo ......i did flash many times using sp tools , same problem , any have solution
file name : MT6580__Apple__XS_Max__IPhone_XS_Max__6.0__alps-mp-m0.mp1-V2.34_hct6580.weg.c.m_P147
i think its a backup rom , because in recovery i make a root integrity check and find some error apk modification....or i have emmc problem and its not full flashing
you can try maybe its work for others...best luck and please tell us if its work.....
The Link
https://www.4shared.com/s/ftVYZSL78iq