Hi All,
I experience a Bluetooth trouble for some weeks: by the past I kept BT always active as it connected automatically upon entering in my cars. I was alerted because I no longer saw the “Connected …” message on the dashboard. I discovered that now, when I activate BT, it starts normally but it stops if it doesn't find any device to connect in the following 2 minutes. I have tried everything I know, even installing some software starting BT and keeping active when the phone is plugged. Nothing to do, it is always the same thing. Fortunately if it finds a device to connect it stays active as long as it is connected.
I have to say that I don't use any battery saver, I don't use the Android option "Energy saving" and I don't use any system program that could be linked to Bluetooth management.
Can anyone help me on this to recover a standard comportment?
BR.
Daniel.
Related
Hi,
I have a VAG (Volkswagen, Skoda, SEAT, Audi,etc..) group's car. It included a built-in bluetooth system. It did well with all my previous phones but with the HTC Titan it does not work as expected. It connects to the mobile and If I do a call just then it works well. Nevertheless, after a while from connection the system gets stuck and does not work. Two minutes later, the connection drops and reconnects after 30 seconds. Then, another two minutes and drops connection, and so on... It seems to be a problem with the agenda as no synchronization is performed and the system seems to lock there... Anyone with such issue and or suggestions/recommendations?. I have tried everything (no sleep mode, screen always on, USB connected for power, full cleanup of the system, no apps installed... ) but nothing happens. I have thought of using a bluetooth sniffer to see what is going on... but did not find one...
Thanks in advance,
Jose
I have a Verizon Samsung Note 2. It is NOT rooted, running stock ROM 4.4.2.
I have been having issues with bluetooth devices having audio cutting in & out issues. Here is the odd thing, it doesn't loose connection & it doesn't happen with everything I connect it to via bluetooth.
I can connect with both my vehicles & no issues.
I have 2 LG headsets & a JUMBLR bluetooth, that the audio with cut in & out after 3-5 minutes of playing. I can restart the device & it will work, but with the same result.
I have a Jabrees bluetooth device that will stream audio just fine, no issues.
I am at a loss as to how to correct this & am looking for some input.
Thx in advanced!!
weave423 said:
I have a Verizon Samsung Note 2. It is NOT rooted, running stock ROM 4.4.2.
I have been having issues with bluetooth devices having audio cutting in & out issues. Here is the odd thing, it doesn't loose connection & it doesn't happen with everything I connect it to via bluetooth.
I can connect with both my vehicles & no issues.
I have 2 LG headsets & a JUMBLR bluetooth, that the audio with cut in & out after 3-5 minutes of playing. I can restart the device & it will work, but with the same result.
I have a Jabrees bluetooth device that will stream audio just fine, no issues.
I am at a loss as to how to correct this & am looking for some input.
Thx in advanced!!
Click to expand...
Click to collapse
I'm not sure if this will help or not, but you might try an app that basically keeps your phone's cpu from dropping down into the lower mhz range when you're not actively using the phone. (I'm guessing you probably lock the screen when playing music).
An app like Wake Lock Power Manager might work, found here: https://play.google.com/store/apps/details?id=eu.thedarken.wl.
I actually stopped using Wake Lock Power Manager and switched to an app called Blank Screen ( here : https://play.google.com/store/apps/details?id=com.mirwanda.blankscreen) . I'm not totally sure... but I think that when you only have the screen go blank with this app... that it allows the cpu to keep performing as if the phone still has the screen on.... which may keep the cpu from dropping down into power saving range. I've never run any tests to confirm this theory, so I could be totally wrong.... However it works though, it seems to help prevent the stuttering problem I was having.
I also try to remember to long press my home button to close all running apps, then go to task manager to clear memory before starting up my music. Using the Blank Screen app and taking these extra steps seems to have solved the stuttering for me. It might not work for you, but won't hurt anything to try.
I will try it.
What other don't understand is why doesn't it do it when I'm streaming through my car & the screen is off?
weave423 said:
I will try it.
What other don't understand is why doesn't it do it when I'm streaming through my car & the screen is off?
Click to expand...
Click to collapse
Yeah... I'm not sure what would cause that either. A quick Google search shows that a lot of other people report having Bluetooth problems with KitKat 4.4.2, so you're not alone with the problems. Maybe the quality of the antennas on the LG headsets & JUMBLR are not as good as the antennas in the car and other device. I also wonder if something is trying to sync or run in the background on the headsets... and maybe it doesn't do this with the car??
You could try turning off auto sync on the phone to see if this might help. You could also try to Disable (Turn Off) different apps through the "Manage Apps" feature under phone's settings to see if this might help.
Another easy thing to try would be to clear the phone's "Cached Data" to see if this might help-- (I read somewhere on the Internet where someone said this helped them). You can do this by going into phone settings / storage / then touch on Cached Data and clear it.
Also... here's a post where someone says that they had duplicate Google Contacts that were syncing issues/ that ultimately was causing their Bluetooth problems ( http://forum.xda-developers.com/showthread.php?t=2646592&page=2 ). They say that by going into Google Contacts and deleting the duplicates, that it fixed the syncing problem and the Bluetooth issues. (You could do this by going to Google Contacts at https://contacts.google.com, the go to "Find Duplicates," and either merge or delete any duplicate contacts that it shows).
You could also try rebooting the phone into Safe Mode to see if the Bluetooth works better. If so, this may indicate that an app you installed could be causing the Bluetooth problems. To get into Safe Mode, Power off the phone, and then Press the Power button again to turn it back on... but also press the Volume Down button at the boot up splash screen and continue to hold volume down until the phone boots up completely. This should boot it into Safe Mode and you'll see Safe Mode in the bottom left of the screen. If Bluetooth works better in Safe Mode, then you can just reboot the phone and it will go back into Normal mode...then try disabling or uninstalling different apps and see if the Bluetooth works better.
Hey guys - I am a 360 owner with a Note 5. After the update recently the watch's gone bonkers, was wondering if any of you guys have any input or is having the same problems. I am so close to taking this back for warranty but first, let's see if we can troubleshoot this.
The issue is the bluetooth connection - it keeps dropping from the note 5 when ever it goes to sleep. If I unlock my phone, it will report saying the watch is disconnected. Upon opening the Wear app, the phone will try to communicate with the watch. Then it will be connected again. This watch will then stay connected for a while until the Note 5 goes back to sleep. I've been testing all day to see if I can fix this with no luck.
So far - I've factory reset, tried disconnecting and connecting, drained battery and recharge, also rebooted many times for both devices. The watch is draining battery fast trying to look for connection too. Any thoughts?
same for me, i think i fix it but i need more testing just make sure all permissions were provided to the wear app and inside the watch
Hello,
Have any of you had a problem of auto disconnection with the application? I have already restored the factory settings several times and the problem still occurs maybe one of you had such a problem and could advise me how to deal with it, I don't get any notifications, which starts to irritate me
Regards
what device (model and ROM version) and what phone? Without any info about your setup it's very hard to try to help...
Anyway, the most common causes to connection issues are other app that may conflict with Amazfit app or kill it while in the background (check your phone settings) and Bluetooth/WiFi conflict. To test the later, disable all WiFi, put phone in Airplane mode then turn only Bluetooth on and see if connection gets better.
I have Stratos A1619 with PolishROM my phone is Huawei Mate 10 lite, but on any kind of ROM that problem occurs
Put your phone in Airplane mode and turn on only Bluetooth, make sure Amazfit app is open and running, confirm that watch is connected then move watch away from the phone. How far can you go without disconnecting? If it disconnects after just 30-50cm then most probably it's a hardware issue. But I'd recommend that you go entirely stock to test these things, it's hard to pinpoint anything using modified ROM.
Heey, you have options in that place where you can uninstall app, battery saving mode or optimization - sth like that. I have stratos and note9 and i have the same problem. Watch seems like have connection (top options at top left symbol phone with tick that means - connected to phone). But phone is saying disconnected. What helps - turn in airplane mode in watch, wait few seconds and turn airplane mode off.
But as i was saying - check battery optimization options and turn that function off in phone. If you are from Poland then write to me PM - i try to explain this in out native language
Hello I got problem with amazfit stratos 3. I cant pair it with any phone. Its probably becouse I accidentialy factory reset it while airplane mode. It seems like bluetooth is not working after reset becouse still in airplane mode. Now I have no access to settings to turn off airplane mode becouse watch restarted in pairing mode. Is there any option to anyway enter settings in pairing mode? Or what should I do?
malycinek said:
Hello I got problem with amazfit stratos 3. I cant pair it with any phone. Its probably becouse I accidentialy factory reset it while airplane mode. It seems like bluetooth is not working after reset becouse still in airplane mode. Now I have no access to settings to turn off airplane mode becouse watch restarted in pairing mode. Is there any option to anyway enter settings in pairing mode? Or what should I do?
Click to expand...
Click to collapse
I know few people with bluetooth issues on the watch. I've faced some problems to connect the watch to the app.
You can try:
Make sure you don't have the watch still paired in Amazfit app, if so, just unpair it from the app.
Remove the watch from Bluetooth paired devices.
Disable bluetooth on phone, force close Amazfit app and clean cache of the app.
Reboot into Ultra mode:
Code:
adb reboot mcu
and then go back to Smart mode.
Use AeX Amazfit mod app, since I'm using this app, bluetooth connection has improve in my case: https://portal.mi-room.ru/files/aex-amazfit-mod/
If nothing of this works, claim for your warranty.
Thank you, but nothing helped. Ill contact support. If anyone else have any idea how to solve this problem please reply. Btw, checked bluetooth status by adb, it says its off sadly
malycinek said:
Thank you, but nothing helped. Ill contact support. If anyone else have any idea how to solve this problem please reply. Btw, checked bluetooth status by adb, it says its off sadly
Click to expand...
Click to collapse
If you use:
Code:
[COLOR="Blue"]adb shell dumpsys bluetooth_manager[/COLOR]
You will get:
Code:
enabled: false
state: 10
address: D8:80:3C:3B:71:F3
name: Watch
Bluetooth Service not connected
Even if BT is correctly connected so is not 100% trustable.
But yes, it's better to contact them.
If you want to do some other test, you can install PaceOn, which has WiFi/BT toggles and try to enable BT.
Before installing the apk, bypass the QR screen with:
Code:
[COLOR="blue"]adb shell pm hide com.huami.watch.setupwizard[/COLOR]
install the app, and play around with BT toggle.
If you want to launch the QR again:
Code:
[COLOR="blue"]adb shell pm unhide com.huami.watch.setupwizard
adb shell am start -n com.huami.watch.setupwizard/.InitPairQRActivity[/COLOR]
Sadly still nothing. Updated firmware by OTA to 4.2.4.0, no results. Also tried to play with bluetooth. Nothing happend.
If anyone still need information how to pair. It worked somehow, after few days off becouse of battery gone. Battery went to 0, then watch shutdowned. After power on, there is information your watch need alteast 5% battery to pair. If you click on it, pairing QR appears for a moment, then i scanned it before dissapeared and it worked.
Hello all,
Sorry for the offtipic post.
I am new at running and looking to get a sports watch to track my runs along with little smart features like showing notifications and controlling music from my phone.
I have short listed two watches according to my needs. Amazfit stratos 3, price 299 SGD or Garmin Vivoactive 3 element, price 267 SGD.
I need accurate GPS and HR along with less buggy software on watch and app.
Need help in deciding one of these two.
I have same problem.
It can pair only in ultra mode.
What should I do?
try to turn on GPS on the phone. for me was only option it paired.
For some time music controller doesn't work. Has anyone the same problem?
Hello all. I will continue here with my issue.
I have amazfit Stratos 3 (rom version 4.2.8.0)
I used the mobile phone HUAWEI MATE 9. No issue with the pairing in the past.
I bought a new mobile phone, ONE PLUS 9, and the issue started.
I had no issue with the old phone; the watch was always connected only with Bluetooth, without location on. The connection was stable without any problem.
I bought a new mobile phone, moved the APP ZEPP, and paired the watch. It worked, but it was not stable. The connection was dropping. I changed the phone's battery customisation for the app, so the app was always on, but nothing changed. Then I upgraded the firmware to 4.2.8.0.
Long story short, I have an issue with both phones from the firmware upgrade.
I can pair the watch with the old phone, and the connection is stable until the first time that watch loose connection with the phone. Then I cannot pair it anymore, and I need to factory reset the watch to pair it again over and over again. The connection with the new mobile phone does not work anymore.
I mostly used watch for 24/7 notification. And this is getting annoying to me.
What can I do? I appreciate your help.
UPDATE 1: with several attempts, I manage to pair the new phone with Stratos 3. BT and location on. IS location necessary that is on, because it draining my battery. On the previous phone, my location was off and the watch connected without issue.
UPDATE 2: The connection was paired for cca 2-3 hours. But in the last 30 minutes, somehow the connection was lost and I cannot pair it again.