[Q] HTC MOZART CHINA FAKE NEEDED working ROM - Android Q&A, Help & Troubleshooting

Ok so I have a HTC MOZART T8698 with Android 2.2 .
So, it had infinite reboot loop, I managed to enter in the recovery menu which is in Chinese, and I guess I installed a wrong custom rom and now when I press the power button it just show that HTC logo, the screen goes black and the led start to blink repedeatly red.
Also a thing. It recognized it as a MTK6516 phone, it automatically instaled some Yukon ACB driver and other like Mass Storage, now after that custom ROM install, it shows as a Spice Android Phone.
I tried to access the Factory Mode to make a clear flash but I couldn't.
Can anyone help me?

Related

Hero stuck on "HERO" screen after flashing

Hi all,
I'm having trouble. My situation is that my Hero is stuck on the "HERO" screen after I tried to flash the Eugene373's Hero 2.1 Eclair v2.6 ROM. Here's my procedure to flash the phone :
- I performed a Nandroid backup
- then I Flash radio to the 63.18.55.06FU_6.35.07.25 version
- finally I Flash the ROM
Unfortunately, I forgot the wipe's step before flashing the ROM... when I reboot the system, the "HERO" screen stay as long as I keep the phone on. I've connected my phone to my computer and tried many ways to boot in recovery but my computer doesn't recognize my phone (ADB Error: device not found).
After many searches on Internet and some short nights, I tried to power on the phone by pressing "Home" + "End Call" keys and after few seconds keeped them pressed. By doing this, the "White triangle of death" displayed. I pressed one more time "Home" + "End Call". Then I discovered that I can access to the "Android system recovery utility". Three options are available :
- Reboot
- Update from a update.zip on sdcard
- Wipe data
I tried the third one. Nothing new after a reboot... I have done a Nandroid Backup before flashing it. But I can't even boot into a RA's recovery and no Nandroid restore option... Every signed ROM I tried to use to update with this utility lead me to the same message saying that the archive is not signed and the verification process failed.
So finally, the only tool I have access is this recovery utility and nothing with the computer. No logcat, no informations.
If anybody had the same experience or have any clues to find a solution, i really appreciate the help ! ... before giving up on my phone or trying to contact the HTC support...
Thanks guys !
---
Here is some informations about the hardware :
GSM Hero unlocked bought one month ago
Before flash :
ROM : MoDaCo 3.0
Radio : 63.18.55.06JU_6.35.08.29
Recovery on phone : original (untouched)
SPL : ?? (Never touch, so original one)
After flash :
ROM : Eugene373's Hero 2.1 Eclair v2.6
Radio : 63.18.55.06FU_6.35.07.25 (not sure of the version, it was the one suggested for Eclair v2.6)
Did you flash correct Roms??
weird. why dont u guys even read before flashing? EUgene hast done any rom which is compatible for HTC HERO (EURO). Eugene's rom is for HTC DREAM G1. if you did flash htc hero euro with eugene's 2.1 eclair then u must have done a BLUNDER.
at 1st do a nandroid restore.
then go to hero section of xda. download eclair rom made for hero by behnaam or LOX_Dev and correct radio. then flash with these files and let us know. and please please read which section you are going in. Eugene's roms are all posted in Dream section.
Thanks to give me some light ! I didn't know that Eugene's work only concerns HTC Dream... In fact, I used to check android's ROM news on AndroidSPIN's website and the page where I downloaded this ROM doesn't clearly indicate that's only for G1 phone (http://db.androidspin.com/android_developer_display.asp?developerid=57).
My mistake... But now I can't do really much with my phone. I can't find a way to make a Nandroid restore 'cause I haven't access to a recovery by adb. Is there another way to make a restore ?
{Rom}[32b]Eclair Hero 2.1 By Drizzy w/ Help from Barak & Eugene373
see the "[32b]"? that's the g1 version.
Tunedyoko said:
My mistake... But now I can't do really much with my phone. I can't find a way to make a Nandroid restore 'cause I haven't access to a recovery by adb. Is there another way to make a restore ?
Click to expand...
Click to collapse
Have you tried using an HTC RUU to set the phone back to a "stock" image?
Regards,
Dave
had the same problem just now
Was solved when i popped the sd card out (while phone was running), then it showed me the language selection menu.
Thanks for the information. I will never forget this blunder.
I tried to use the RUU_Hero_HTC_WWE_2.73.405.66 but it leads me to an ERROR[170] : USB CONNECTION ERROR
Yeah, as I am stuck on the "Hero" screen, it doesn't boot properly and the computer doesn't recognize the phone by Usb (otherwise I suppose that I could have used the adb shell to reboot on a recovery img)... I begin to think that I am stuck...
Actually the only way for me to interact with the phone is this "Android system recovery utility" screen that can only accept signed packages (I even trid to use a HTC Generic Shipping ROM because they are official signed Roms). Finally do I need to unweld the ROM and change it ?
Finally ! I have found a solution ! I succeed to make a connection through my computer by usb port with the flashboot mode, reboot on custom recovery and restore a nandroid backup. Here's a explanation of my problem with its solution :
Symptoms :
After flashing a phone with an Custom's ROM intended to another phone, you get stuck on the "Hero" screen after reboot.
You can't
make your phone recognized by the computer by usb
use adb to control your phone
But
the screen is on and it can reboot. It stay stuck on "Hero" screen once you power on the phone
when you power on the phone by pressing "Home" + "End Call" keys together and after few seconds keeping them pressed, a "White triangle" screen displayed. By pressing one more time "Home" + "End Call" keys, you arrive to a "Android system recovery utility" with 3 options (Reboot, update, wipe).
Solution :
You can access to a flashboot mode and use the usb port. Switch off your phone and power it by pressing "Back" + "End Call" keys together. You will access to the flashboot usb mode and then use adb to reboot with a proper recovery img to make a nandroid restore (for example RA-hero-v1.5.1 by Amon_RA).
Hope this could help anybody in the futur !
Thanks for all the answers, that gave me informations and motivations to search more on Internet !
Hi,
I have similar problem ... after I flashed the radio for android 2.1 v1.3 and restarted,my HTC is blocked on the HTC and the box image logo and after 3 seconds it shuts down.The only way to power on the phone and get to that image is to reinsert battery.No other buttons work.
Any idea ?

[Q] HTC Hero [Era G2 Touch] possible serious problem...

Hello, dear xda users. I am kinda new in Android world- i bought HTC phone month ago and i tried to get used for it. My phone is polish version of T-Mobile G2 and its called ERA G2. I rooted it, installed Amon-Ra and tried a lot of custom ROMs. After month of using different kind of Android and HTC ROMs i stayed with RCMix 2.3, because of his speed and 2.1 Sense on it. And now my problem begins:
Today my menu button stoped working in some applications so i decided to reboot device. Everything went fine with getting off, but when phone vibrated and Era initializing screen appeared, nothing happened after that.
-I tried with removing SIM, SD and all other options but still it is frozen. After couple minutes its vibrating again and restarts.
-When i plug charger for turned off phone, charging led is on but at the same time i am turning on phone, led disappears (phone is still plugged to charger).
-I cannot go to recovery by holding Home+Power... nothing happens.
-When i am holding VOL Down and Power this unknown for me HTC/Android window appears but automatically starts some kind of loading, and when its in Simlock and opening FAT32 something it restarts and Era initialization screen is on again.
-Unfortunately i dont have any warranty for this phone and i am from Poland so professional technical support is the worst way of helping for me right now.
I really enjoyed HTC Hero and i want to enjoy it more, so please if you know any way or kind of solution, please reply ; ) [sorry for my english]
Do You have adb set up?
By nothing happends You mean it wont turn on, or it wont run recovery?
Sent from my Hero using XDA App
remove battery and put it back again. This will turn off the phone. Then try Power it up. Do you get into bootloop again?
What about recovery? Replace battery and power up into recovery. 2 things might happen. You can get into your recovery normally and reflash the rom. Or you might get a screen with a phone and a big red exclamation mark. In this case you've lost your recovery and need ruu install.
brat.haneq---> i ment that i cant go to recovery- i have initialization screen and nothing happens.
So, first of all i restarted my phone a lot of times in different combinations (with SIM, without SD etc.). I cannot get to recovery when i am pressing power+home buttons and nothing happens, no exclamation mark like arvan said. I just see blue initialization screen from Era (it says Era G2 Touch)as always. Normally after some seconds it dissapears and normal bootscreen from ROM shows up, but not this time. Any thoughts?
Oh, and what is adb set up? Cheers ; )
So I guess You've really lost the recovery.... And as I said, RUU install will help...
Okay, but how i can install RUU? I tried from PC but Windows doesnt see my device... Any other option?
have you got the drivers? they come with htc sence. what does your pc see instead of hero? there might be some unknown device in the device manager if it's a driver problem.
Install RUU form SDcard (extract ROM.zip from RUU, rename it to HEROIMG.zip and put it to root of SDcard) using HBOOT mode.
There's a guide explaining the steps here http://forum.xda-developers.com/showthread.php?t=714519

[Q] HTC Desire HD Brick~!!

I was trying to install custom 2.3.5 ROM to my HTC, because my 3G network is not working, as somebody told me that the 3G will live again if I update the ROM to 2.3.5 sense 3.0.
Then, I have installed the Advanced Ace Hack Kit and proceeded the rooting procedures. Everything looks okey and finally I get into the menu for installing the update.zip from SD card.
The outcome is that the phone stays in the "HTC Welcome Screen" forever...I have tried many things, nothing has changed since.
There is one thing I remembered that I did wrong was that I forgot to pull the battery out after the rooting procedure has completed. May be this is the problem.
Any one can I me how to rescue my HTC Desire HD?
go to your recovery menu and factory reset.You got a bootloop
hello...I can't get there....The key combination "Volume Down+power" not working....
lkj-17 said:
hello...I can't get there....The key combination "Volume Down+power" not working....
Click to expand...
Click to collapse
power off the device, then pull the battery. then put the battery back in and volume down+ power should do the trick
Thanks, I have get there...Very good...But after I press reset to factory setting..it goes to the HTC logo again and stay there..............
Please use the Q&A Forum for questions Thanks
Moving to Q&A
If you can get in to recovery. Get a Rom on your sd by selecting: mounting sd storage.
And flash it with recovery.
Send from my BinDroid Desire HD with Tapatalk
Download a different rom (or redownload the same rom) with your pc and then move it over to your SD card. Then boot into recovery (The black screen with orange letters) and do a complete factory reset and wipe the cache partition and then go to install .zip from sd and choose the new rom and BOOM! It should be fixed.
If your phone boots into recovery then it's not bricked really. You can always fix it. And just because it doesn't boot the first time doesn't mean you need to redownload the rom either. But seeing as how you tried it twice and it's still stuck on the bootloop then it probably is the rom.
HTC Desire HD brick
I've got the same problem :/ HTC Desire HD brick -.-
DHD Bricked
I have also bricked my dhd and my volume down button seems to have died on me completely...I could cry.
HTC desire HD bicked after RUU install
Was installed RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed
Now I can't power on device. When I connected it to the PC after one vibration I see in device manager only " HTC Android phone USB device "
Before RUU install my device appeared by cmd : " adb devices".
Also before RUU install taken logcat.

[Q] Alcatel OT-990 - Bricked(?)

I'll tell my story.
STORY
I didn't really need to jailbreak my phone to do advanced stuff or tweaks. I was getting a low storage notificationand considering i didn't installed games, only social networks and daily use apps, i though there was a simple solution to move all them to the SD card. I found a mod that allows exactly that but I did my research and i found that i had to do a lot of things.
1.Root (Alcatel OneTouch 990 / Froyo 2.2.2) - I used PdaNet and SuperOneClick 1.9.5 (latest versions didn´t work, more standard root processes neither)
2.Install Recovery ClockworkMod - I Used ROM Manager and Recovery Manager (The last got the work done)
3. Flash the ROM - I didn't know that install the ROM and flash it were different things so i did next without flashing MY MISTAKE
4. install Ext4All fix - I used the Recovery mode of Clockwork. / it said that now i had "a system with steroids" but all i have is a (i hope not totally) bricked phone
CURRENT STATE
I'd like to think is not unarguably dead. PdaNet still recognizes it when i plug it in the computed.
If i try to turn my phone on, it shows Android logo and after that it goes to a black dark screen forever, but the touch icons are with light (i hadn't waited more than a pair of minutes, actually)
If i try a hard reset going to recovery mode (volume up + power) it shows the Android logo, and after that goes to a black screen but illuminated by the backlight, similar to the one that was shown when the cellphone wasn´t bricked.
¿Any idea? ¿Did i lost it forever?

Black screen after Logo[GFive President G9]

Hello guys, I have run into a serious problem here! Please help me out..
I have a GFive President G9 Android running stock Jelly Bean 4.2.1 (ROOTED). I tried to install a boot animation through ROM Toolbox app, when I rebooted it, it didnt show any boot animation and booted straight to the home screen. So I just went into the ROM ToolBox app and restored the bootanimation backup I had created earlier to get the original GFive boot animation back.
However, when I rebooted, my phone showed the GFive Logo, and after it the screen went dark( The screen is backlit but doesnt display anything). It just stops there and doesnt do anything. Ive tried removing the battery but to no avail. For some reason I CAN'T ACCESS the RECOVERY or the DOWNLOAD MODE, as holding the power button and vol up etc still ends up in the same situation - Black backlit screen after logo. The phone isnt in a reboot loop or anything, it just stops at the black screen for eternity.
THE WORST PART, this phone probably has a damaged USB port, since I was previously able to charge it via the PC, but it wasnt detected in the PC. So I CANNOT CONNECT IT TO THE PC.
So is there anyway I could get this phone back alive? Is a factory reset possible? Please help me experts!! :crying:
P.S Custom TWRP is installed, but I cant access it
So there's no expert in this whole forum who has a solution for this? Because no reply means no one has an answer..
Incase theres no way out of this, please mention that.

Categories

Resources