Hello.
I'd been trying to dial these codes but nothing happens.
##626# or ##626* or ##626
Also ##000000# (default) and wont do anything either.
I was on 4.0.4 but since these codes weren't working, I decided to go back to Stock.
I'm currently on 2.3.5 but these codes doesn't work on this version either.
Those codes are important, because I'm trying to activate it with a new number.
But the carrier says that if they don't get the menu from those codes, they can't.
Before I got back to Stock, I had my PRL for this carrier (Tricom) updated, got signal and everything.
Now I don't have signal but that's not a problem since I can put it again.
I would like to know how to make them work.
Thanks in advance.
Related
Hi,
I am trying to activate the phone and the instructions are to use the ##337812# code. When I enter that on the dial pad the phone does not provide the entry screen, the phone just acts as though it is a phone number to be dialed. Any ideas?
thanks
Where are you getting those instructions from? If you call your carrier they should be able to activate it. The last time i had a phone activated they told me to dial ##000000send and change some stuff. That was on stock, it dont seem to work on energy rom. They still had to do something on there end.
Hey I had same problem with my tp and it was that if you use a non-stock rom the numbers are in a different position.
If you flash to a stock rom then program your phone it will work then you can reflash to whichever rom you prefer.
I just flashed simply honey 5.1 and now i cant recieve calls or even get a data signal. help? i seem to be having the same problem with anything simply honey 3.8+
Back to stock (Odin), and than try reflashing. Looks like bad flash. Unless you had bad luck like me and core files got messed up...
I have Odin'd back and reflashed twice now
My stock works fine, but whenever I flash I lose my data capabilities and I can't receive calls. Is that what it's like when your core files get messed up? If so, how to fix?
No, you have different problem than me than.... my does not connect at all in any rom.
sorry but your problem is beyond my knowledge, I would say that maybe bad download, but it seams you downloaded more that one rom so... sorry
Go to settings, network, mobile, check data, check roaming, then go to network operator, choose provider automatically.
After it finishes, go back and go to access point names and make sure you have the correct apn.
If not, please state the rom, kernel, and modem by going to settings, about.
After I checked Data and roaming and set it to choose automatically it said "registered on network" but when I went to APN it says no items.
I am using:
Firmware
2.3.4
Baseband
T959UVKB5
Kernel
2.6.35.7-I9000XXJVP-CL264642
Bullet-JVP-1.2Ghz-v5.4-voodoo#12
Build number
GINGERBREAD.XXJVR
Go to the Market, search for APN Global, install it and let it install your settings for your carrier. Let me know if you still need help.
Also, what is your carrier and which country? You have an I9000 kernel that's why I'm asking.
Hey, I noticed you folks were mentioning something like what I was having trouble with. My phone shows that I have a 3G or H connection; however, any app that uses data fails to connect. Any ideas on solving this? It seems as though Tomulek may have experience with my issue.
Good for everyone!!
Sorry for my google's traductor english
I mention my case to see if with the help of all I can restore the phone.
After spending hours tinkering with the phone, turn it into a paperweight and reliving me realize I can not find a way to make the phone work properly.
The phone lights up, root access and the latest Cyanogen rom installed with the corresponding recovery.
The problem is that once you put on the sim that puts you never recognized. It asks me the pin and when I try to enter the dialpad to put a sequence to know, for example, if you have a lock on (step I made when the phone had the movistar rom) or simply to know the imei, it is trying to call and not open the menus.
I do not know if discovered and can serve as something that if I go into Settings - About Phone ANRO I have the version 2.3.5, 2.6.35.7 Kernel Version-perf-CL591990root @ dell126 # 1 and build number GINGERBREAD.XWKS3 . What baffles me and maybe come around the problem is that in the field puts Base Band Version Unknown. The same if I go into state gives me no information network, imei, network status, etc..
I tried also to urge a new modem, but not for that.
Has anyone had or has the same problem?
I appreciate your help in trying to help solve the problem.
If you need any additional information, be alert to tell you.
Greetings!
Hello, I am working on my friends phone that got blocked, i managed to change the IMEI but it says no network. I tried many things, even getting into the service mode like here
https://www.youtube.com/watch?v=Pai4BH3AWq8
and tries the unlock codes for the gs5 but no luck.
Do I need to change anything or what do I do?
Thanks,
have ypu fpund a ifx mine is also not wokring
I just got a Galaxy Light for free that I am setting up for a friend, and right after I got it, I flashed it to TWRP, and put in Tiger Lily, then went to CM12. When I popped in her sim (ATT) It didn't do anything, and as far as teh phone was concerned, no sim card existed. I couldn't get into mobile network settings due to the "insert sim card to access network settings" error, except on CM12, where I got the "User does not have permissions to edit APN" message. I did eventually get a few codes to work and got to the basic service menu, where I could verify it was reading a radio. I have tried Tiger Lily, 2 different CM12 builds, and Stock 4.4.2, and it doesn't seem to read the Sim at all. Also, all builds except stock give a blank IMEI when I check it with *#06#. I am thinking it is unlocked, as i don't get a code request, and I swear it was on Boost when I got it, though it could just not be reading the sim. I tried a few other older Sim's, with the same issue, though I don't know if any were tmobile or metro variants.
I am downloading the 4.2.2 firmware now, to retry regionlockaway with the older modem, but, looking to see if anyone has any input on this. Any way to see if it is unlocked or not? I don't want to buy an unlock code if it is already unlocked, plus I can't get to any of the unlock screens.
Most of what I read is so old, that it doesn't apply, so updated info would be awesome. Thanks!
Hic_Svnt_Dracones said:
I just got a Galaxy Light for free that I am setting up for a friend, and right after I got it, I flashed it to TWRP, and put in Tiger Lily, then went to CM12. When I popped in her sim (ATT) It didn't do anything, and as far as teh phone was concerned, no sim card existed. I couldn't get into mobile network settings due to the "insert sim card to access network settings" error, except on CM12, where I got the "User does not have permissions to edit APN" message. I did eventually get a few codes to work and got to the basic service menu, where I could verify it was reading a radio. I have tried Tiger Lily, 2 different CM12 builds, and Stock 4.4.2, and it doesn't seem to read the Sim at all. Also, all builds except stock give a blank IMEI when I check it with *#06#. I am thinking it is unlocked, as i don't get a code request, and I swear it was on Boost when I got it, though it could just not be reading the sim. I tried a few other older Sim's, with the same issue, though I don't know if any were tmobile or metro variants.
I am downloading the 4.2.2 firmware now, to retry regionlockaway with the older modem, but, looking to see if anyone has any input on this. Any way to see if it is unlocked or not? I don't want to buy an unlock code if it is already unlocked, plus I can't get to any of the unlock screens.
Most of what I read is so old, that it doesn't apply, so updated info would be awesome. Thanks!
Click to expand...
Click to collapse
After downgrading to 4.4.2 (T399NUVUANK3_CL2903595_QB2893704_REV00) I did get the sim unlock prompt again. If anyone knows of any software unlocks, would love to know them, else gonna buty an unlock code if I can get a recommendation. Thanks!
For anyone needing the SGH-T399N stock firmware for the Metro edition, here is a link, as it was hard to find. I kept getting T-mobile versions, which will lock you at the boot logo.
https://mega.nz/#F!8og23YwZ!XViwM_6f-Yhom8DKOHXWLQ