Please help me, my gsmart g134 is bricked. Its not turn on (only continuous short vibrations). When hold volup+vol down and connect to PC qpst said that the phone is in downloading mode. To unbrick it i need 7227t.hex file. Or maybe somebody know the other way to unbrick it?
Related
Hello Everyone,
2 days ago i tried to hard reset my Karbonn A21 android phone. i pressed Power+volume+home button. after that there was an error displayed on the screen saying "ENTRY QPST DOWNLOAD". i quickly searched on the internet but wasnt able to find any successful link. but then my computer asked me to format the device, i thought this will reset my phone but unfortunately i was totally wrong. after the format i tried to start my phone again but nothing happened. i also tried different combinations of keys but nothing happened not even a single pixel lit up lol. then i downloaded cherry mobile flare software and AIO flasher and all the image files and other files required. they didnt work for me. now whenever i connect my phone to the laptop, i get Qualcomm HS-USB QDloader 9008(COM 4) in ports section of my device manager. i tried to flash it in fastboot in AIO flasher. it says flashing but nothing really happens even after 10-15 minutes. all the online forums i searched they say enable debugging mode on ur phone in order to reboot but i dont know how the heck i can do it when my phone doesnt even start up lol. I am left with a dead phone now. can anyone please help me out and solve my problem. and please advise me step by step what to do next in order to get my phone working...please...
Steps to recover
navvie77 said:
Hello Everyone,
2 days ago i tried to hard reset my Karbonn A21 android phone. i pressed Power+volume+home button. after that there was an error displayed on the screen saying "ENTRY QPST DOWNLOAD". i quickly searched on the internet but wasnt able to find any successful link. but then my computer asked me to format the device, i thought this will reset my phone but unfortunately i was totally wrong. after the format i tried to start my phone again but nothing happened. i also tried different combinations of keys but nothing happened not even a single pixel lit up lol. then i downloaded cherry mobile flare software and AIO flasher and all the image files and other files required. they didnt work for me. now whenever i connect my phone to the laptop, i get Qualcomm HS-USB QDloader 9008(COM 4) in ports section of my device manager. i tried to flash it in fastboot in AIO flasher. it says flashing but nothing really happens even after 10-15 minutes. all the online forums i searched they say enable debugging mode on ur phone in order to reboot but i dont know how the heck i can do it when my phone doesnt even start up lol. I am left with a dead phone now. can anyone please help me out and solve my problem. and please advise me step by step what to do next in order to get my phone working...please...
Click to expand...
Click to collapse
First Don't panic
I will provide you with steps to unbrick your device
1. Install AIO Flasher to your PC. Download from here
2. Install PdaNet on PC. Download from here [pdanet.co/bin/PdaNetA4126.exe]
3. Get recovery and flash. (CWM preferred, download and know how to flash from here)
4. PM me to get stock ROM.
and hit thanks if it helps.
Hello everyone,
I bricked my HTC desire HD by flashing a wrong CWM recovery. I did this myslef thats why i know it. Now my phone is all dead it does not boot and the bootloader is dead too. There is no device detected with usb, But when i hold down (vol up+ vol down+ power on) a green light starts blinking and the phone shows up in computer as (qualcom CDMA technonlogies MSM). After installing the drivers it is redable in QPST only. This software identifies it as a phone in "download mode"
I have seen on internet tutorials about flashing Bootloader by QPST, these tutorials are about Karbon mobile, LG, samsung but there is no tutorial about htc.
Is there anyone who can provide me a way to flash bootloader with qpst, or qpst firmware for desire HD. Or if any one can convert the original firmware to (HEX) format so it can be flashed by qpst. i will be very greatfull.
I know that JTAG can fix my problem but there is no one in around here who can do this, so my only option is to flash it with QPST or have its mother board replaced.
Hello guys. Please help me, I just bricked my Samsung S5 clone when I used MTK Partition APK. I clicked on 2GB and then it rebooted. Now its dead and only thing i can do is to get to this menu. Problem is that no option is working or seems to do anything. When i try to power it up, only backlight is visible.
Options are:
Recovery Mode
Fastboot Mode
Normal Mode
And its even upside down ! Please help me.
NEW INFO:
I tried every possible button combination when connecting USB cable to it. It keeps connecting and disconnecting with MTK Preloader USB. I tried SP Flash Tools, MTK Flash Tools and MTK Droid Tools. Nothing seems to work. Please can anybody help me ? I think that telephone itself is not dead and its only software brick. But i cant handle this alone.
Screen black, no Samsung logo or anything. It won't load in to download or recovery mode.
when I connect in to pc it identify it as EMEI without driver.
I saw somewhere that I can revive it via sp flash tool but I need scatter file.
And unbrick stuff is an option too but I didn't find one for my phone
Have any idea how to unbrick it ?
Please. No jtag , I doesn't have one
I have a T9 4GB/64GB TV BOX (RK3328) TV stick, it got bricked. I tried all method to get it boot in maskrom mode but no luck. was flashing firmware its failed.
now my box not turning on.
I used flash tool to flash T9-4_64-RK3328-6255-v9-1228_AndroidTVBox image file. I attached flash log file and board image
I have no ideas, anyone please help!
Same Issue with me. it is dead, if you have found any solution just tell me
I was able to get it in maskrom mode by shorting these point
zee95 said:
I was able to get it in maskrom mode by shorting these pointView attachment 5661685
Click to expand...
Click to collapse
Hi @zee95 , I have the same problem, I bricked it trying to flash it, now it doesn't turn on not even the boot led nor recognized by PC when I plugged it with usb
Can you guide me please with the steps you followed to unbrick, how did you shorten those points. Thanks in advance @zee95
How you are flashing rom ?
The one i used with an incorrect firmware was Factory Tool v 1.46.
After that the box never turned on, nor even the t9 boot screen or the blue front leds. Also unable to been recognized by any flash tool.
I have tried with SD Card with firmware (using Rockchip Create Upgrade Disk) , hit reset button and power on, but nothing.
Also tried shortening with a clip and needle the two points you mentioned in the picture and plug the power cable at the same time but nothing.
Regards
Having same problim
when ever i connect to pc its in maskrom mode and cant exit from it
plz help