Hello guys. Please help me, I just bricked my Samsung S5 clone when I used MTK Partition APK. I clicked on 2GB and then it rebooted. Now its dead and only thing i can do is to get to this menu. Problem is that no option is working or seems to do anything. When i try to power it up, only backlight is visible.
Options are:
Recovery Mode
Fastboot Mode
Normal Mode
And its even upside down ! Please help me.
NEW INFO:
I tried every possible button combination when connecting USB cable to it. It keeps connecting and disconnecting with MTK Preloader USB. I tried SP Flash Tools, MTK Flash Tools and MTK Droid Tools. Nothing seems to work. Please can anybody help me ? I think that telephone itself is not dead and its only software brick. But i cant handle this alone.
Related
Hi Masters,
I just like to inquire if I can still unbrick my clone Note phone. It has same spec as the HDC 5.7 Lord N9588 same box with NeoI brand. The main reason I flashed the ROM is because the accelerometer and GPS is not working so I found this ROM in needrom.com under HDC Lord N9588. as instruction says do not change anything in the setting (includes preloader). It successfully flashed the ROM but after reboot, the display is messed up and showing different color vertical lines. same as in the recovery. I believe that the phone still boots up, only the display messd up as I still can hear a sound every time I press the button and the screen and can hear volume sound when pressed. I still have the original ROM but the problem is it does not connect to SP flash. Last time when I connect to SP flash I can see MTK PReload VCOM USB when connected, now I can only see Preloader VCOM USB and gives errorS_COM PORT OPEN FAIL ERROR (1013) .already tried reinstall usb drivers.I can still access the phone trough adb shell but could not flash using fastboot at it says device not detected.
Thanks for any advice in advance.
Regards,
Ferdie
Hi all,
I have a Star/Bluebo B6000 phone which I believe is based on the MediaTek 6589T.
I followed the procedure here: http://forum.xda-developers.com/showthread.php?t=2206421
to set up a new ROM for the phone.
I seemed to have gotten it all done properly, but the phone only stays connected for about 2 seconds. The SP Flash tool moves into the red progress bar and then just fails.
Luckily, there isn't any software damage on the phone (from the look of it).
I'm trying to put in a new ROM to actually fix a previous issue where my phone remains on but when I press the home button or the power button the screen stays blank. Think a new ROM/fresh start may solve this.
But the core issue is that I am unable to put in a new ROM because the phone doesn't remain connected long enough.
Is there a solution to this? Or is there another way to install ROMS?
Thanks.
There are several things the issue could be.
Try running SP Flash Tools as Admin.
Try a different USB cable.
Try uninstalling current drivers and using PDANet VCOM USB drivers
Try a different PC
Try MTK Flash Tool as opposed to SP Flash Tool.
Make sure the scatter is correct. Create a new scatter with MTK Droid Tools
None of them work.
I've tried 4 different cables. MTK and SP tools.
It seems as though something is wrong with my preloader. When I try to 'restore factory settings' or even try to restart in recovery mode, the phone doesn't do anything. It's almost as though these modes don't exist or are bugged/busted.
EDIT: Yes, it seems to be some kind of preloader issue. When the phone is OFF, I connect the USB (which the computer recognises) and the within 2 seconds the 'disconnect' sound comes up. Within 2 seconds after that the battery charging shows up on the phone.
I say this because when the phone is ON, I am able to transfer files onto the phone and treat the phone as a normal connection. Something within the phone's software is causing SP Tools/MTK Tools/Other drivers not connect to it. I have a feeling I may have a corrupt/broken preloader/recovery system.
Thanks for the help. Please do advise as to what I can do.
Anyone?
Really could use some help.
vika09 said:
Anyone?
Really could use some help.
Click to expand...
Click to collapse
Hi, did you manage to get this sorted?
Could someone tell me how to unbrick sp6820a spreadtrum (minis 7100 ) phone, remeber I press home button and plug usb cable to flsh in reaserchdownload but this time it won't come out in anythings including flash screen.
I've done with backup on backuptools.apk before it is bricked. Fastboot even not working and CWM also for last time where I suppose to use researchdownload as tools.
It is actually been hard bricked.
Thanks.
my lenovo a7000 doesn't turn on, can't go to recovery mode. also my first hardbrick experience. desperate for help.
whenever i use spflashtools to download a fresh stock rom to my phone, it always shows this problem
"BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)"
I've also tried to format it, but the same problem comes up.
Then I saw this vid. It's about fixing any bricked china phone.
"How to Unbrick every MTK China Phone ! Preloader / SP Flashtool Fix [HD]"
(pls search it on youtube if you like. somehow i couldn't post links.)
I don't know, but I think this vid is trying to fix those phones that aren't recognized by the PC. But mine is recognized. It comes up on the Device Manager as a MTK USB Port (COM10) with the battery on. But it keeps on getting disconnected and reconnected again. But this stops when I remove the battery, put the battery back on, click on download on the spflashtools, then connect the USB. The error will appear, but somehow the connection becomes stable.
Also this video talks about META mode. With the battery out, I tried all of the key combinations to enter this mode, without success whatsoever. If you know something, pls. share.
Maervince015 said:
my lenovo a7000 doesn't turn on, can't go to recovery mode. also my first hardbrick experience. desperate for help.
whenever i use spflashtools to download a fresh stock rom to my phone, it always shows this problem
"BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)"
I've also tried to format it, but the same problem comes up.
Then I saw this vid. It's about fixing any bricked china phone.
"How to Unbrick every MTK China Phone ! Preloader / SP Flashtool Fix [HD]"
(pls search it on youtube if you like. somehow i couldn't post links.)
I don't know, but I think this vid is trying to fix those phones that aren't recognized by the PC. But mine is recognized. It comes up on the Device Manager as a MTK USB Port (COM10) with the battery on. But it keeps on getting disconnected and reconnected again. But this stops when I remove the battery, put the battery back on, click on download on the spflashtools, then connect the USB. The error will appear, but somehow the connection becomes stable.
Also this video talks about META mode. With the battery out, I tried all of the key combinations to enter this mode, without success whatsoever. If you know something, pls. share.
Click to expand...
Click to collapse
Hi!
I had the same issue 2 day before!
To fix it I was unable with windows,so I downloaded a spflashtool for linux. I started with sudo (root access) and made the same method with the windows version.Its worked for me! But wait one or two day,maybe somebody will know a solution with windows.
My Lenovo A7000 Does not turn on
While installing the official update marshmallow device switched of and then it does not turn on. If i put in charge then after sometime lenovo screen appears and the it shuts down again,. Cannot go to recovery mode also. The lenovo screen shows TOOL Dl image fail in the left bottom side.
How can i solve this problem Please someone help me:crying::crying::crying:
Hey guys, i am hoping someone can help me.
I have bricked my phone, no recovery, no fastboot, nothing, just vibrations and notification led. So i managed to open up phone and to disconnect battery.
Next thing i installed lattest sp flash tool v5.1952, and i found authentication file on xda. I downloaded 11.0.7.0 global image, and use Android_scatter file from there. I installed both drivers for mediatek preload one and vcom drivers, and rebooted my phone.
So i turned the phone off, by disconnecting battery, pressed start on sp flash tool, connected the phone via usb cable, but nothing is happening. I also tried while phone was on but same thing.. Have anyone have same issues, can somebody help me please?
You will need a authorized mi account if u have can you please help me