since last update 1.41 everything seems ok apart from when I am disconnected from internet via wifi or data themer crashes,as soon as I reconnect it is fine,anyone else have a similar problem ?
this only applies to any themes made in 1.41,any themes that are made in previous version do not require wifi/data access,can't believe just me having this issue.Have gone down the remove install but issue still persists.
alldroid said:
this only applies to any themes made in 1.41,any themes that are made in previous version do not require wifi/data access,can't believe just me having this issue.Have gone down the remove install but issue still persists.
Click to expand...
Click to collapse
Does it do it with version 1.42 as well?
not tried 1.42 yet will update when I get in from work and let you know
alldroid said:
not tried 1.42 yet will update when I get in from work and let you know
Click to expand...
Click to collapse
Did you try to Re-download your theme ? or try another ?
Just updated and problem seems to have vanished now,thanks to devs for quick solve
Problem not resolved yet.
I updated from 1.41 to 1.42 yesterday but the problem still persists.
Whenever i get disconnected from wifi or mobile data, i get to see an irritating pop-up every 1 minute saying: "The app found information about previous cashed. would you like to send this data to the developer?"
I have send it numerous times but it is still there. Its too much irritating.
I also tried uninstalling the themer app and deleting the my colorscreen folder, then restarted the phone and reinstalled the themer. But the problem is still there.
For additional information: This weird problem has started since addition of stupid "bollywood" category
yeah I just made a post regarding this as I now have the same issue m8,sent bloody loads of reports,and you are correct removing themer completely and reinstall does not work
the only way I have managed to get it working properly is to do a factory reset of the phone.Everything else including numerous deletes and reinstall does not work,I tried this as a last resort.Can someone let us know why themer seems to be holding onto the crash data,which as posted above is so annoying,and I or anyone else shouldn't have to factory reset to correct,Can this issue be looked into please by developers,as it can't just be the two of us having this issue.
Imranhakro said:
Problem not resolved yet.
I updated from 1.41 to 1.42 yesterday but the problem still persists.
Whenever i get disconnected from wifi or mobile data, i get to see an irritating pop-up every 1 minute saying: "The app found information about previous cashed. would you like to send this data to the developer?"
I have send it numerous times but it is still there. Its too much irritating.
I also tried uninstalling the themer app and deleting the my colorscreen folder, then restarted the phone and reinstalled the themer. But the problem is still there.
For additional information: This weird problem has started since addition of stupid "bollywood" category
Click to expand...
Click to collapse
alldroid said:
yeah I just made a post regarding this as I now have the same issue m8,sent bloody loads of reports,and you are correct removing themer completely and reinstall does not work
Click to expand...
Click to collapse
So for both of you, the problem only occurs when you get disconnected from WiFi/mobile data? Does this include going into Airplane mode?
We want to see if we can replicate this on our end.
ThemerSupport said:
So for both of you, the problem only occurs when you get disconnected from WiFi/mobile data? Does this include going into Airplane mode?
We want to see if we can replicate this on our end.
Click to expand...
Click to collapse
Yes, this includes the Airplane mode as well. (Obviously)
Yep as above and guess what factory reset does not solve it same problem this morning even though no errors in themer after reset,and agan plane mode is the same when not connected
Imranhakro said:
Yes, this includes the Airplane mode as well. (Obviously)
Click to expand...
Click to collapse
We're just trying to replicate the problem. There hasn't been anyone else with the same issue, therefore we need as much info as possible. I put my Nexus 5 on Airplane mode every night and haven't experienced the problem, hence asking the question.
ThemerSupport said:
We're just trying to replicate the problem. There hasn't been anyone else with the same issue, therefore we need as much info as possible. I put my Nexus 5 on Airplane mode every night and haven't experienced the problem, hence asking the question.
Click to expand...
Click to collapse
I assume there must be numerous people out there who might be facing the same issue, may be they are following this thread and just waiting for us to reach the resolution of the problem.
I agree with you that the more information will help you to diagnose the problem in better way, and I appreciate your support.
I own stock Samsung Galaxy Note 2 with Android 4.3. I''ll appreciate if "alldroid" and any other who is having the same issue, share their device info here.
Already did above somewhere m8 galaxy s4 running stock kitkat,it has to be themer related other wise the factory reset would have solved it.The only other solution is that the theme itself held on to the errors prior to remove and delete,but even if it did it is a themer problem imo as once an error log is sent it should be removed frm themers memory
Imranhakro said:
I assume there must be numerous people out there who might be facing the same issue, may be they are following this thread and just waiting for us to reach the resolution of the problem.
I agree with you that the more information will help you to diagnose the problem in better way, and I appreciate your support.
I own stock Samsung Galaxy Note 2 with Android 4.3. I''ll appreciate if "alldroid" and any other who is having the same issue, share their device info here.
Click to expand...
Click to collapse
alldroid said:
Already did above somewhere m8 galaxy s4 running stock kitkat,it has to be themer related other wise the factory reset would have solved it.The only other solution is that the theme itself held on to the errors prior to remove and delete,but even if it did it is a themer problem imo as once an error log is sent it should be removed frm themers memory
Click to expand...
Click to collapse
We'll keep searching to see if more people are reporting this problem. There is a huge update coming up, I'll see if the update is fixing this issue.
still have the issue and I refuse to believe only two of us have this issue,either that or we are the two most unluckiest themer app users in the world
latest update and..........problem solved no longer asks to send crash data when no net connection
No guys, you are not alone, I'm having this issue too anytime I disconnect my device from a wifi or mobile data, even during poor connection even though with the new update this should be fixed. I don't know if this happens in Airplane mode, never used that mode but I'll try and give you feedback.
Inviato dal mio macina caffè usando Tapatalk
see I knew we weren't alone,as above I have changed messed about with,used airplane mode and not had the error since the latest update here.Let us know if the update solves your problem m8
Related
ive searched for things such as "sleep crash", "sleep bug", "screen wont turn on" etc. but can seem to find anything that tells me anything other than turn off wifi (which i tried to no avail). My issue is that when i press the power button for 1 second to turn off my archos 70 screen it will not turn back on. Same thing happens when i let it fall asleep. If i leave it plugged in and not allow it to turn off screen i have no issues. My apologies if i just don't know what words to search for ... i tried. In on the .4 firmware (latest) with no mods. This has happened through the last 3 firmwares from archos. Any ideas?
Have a you tried a full reinitialization (in settings > repair and formatting) and then reinstalling the latest firmware? If you have just been updating the firmware, the problem may have been deeper.
Thats strange... I have a similar issue with my 101: when i leave my tablet asleep for more than 20min, I can't turn it back on without doing a hard reset. Now it only happens when I simply shut off the screen and leave it alone. If I hold the power button and use deep sleep though, it works just fine. When I can't get it started I notice the little power light is on, but the screen stays black... any suggestions??
I have read somewhere in this forums that re-calibrating your screen from Settings might help, but I still didn't tied - if someone try please post results.
Techngro said:
Have a you tried a full reinitialization (in settings > repair and formatting) and then reinstalling the latest firmware? If you have just been updating the firmware, the problem may have been deeper.
Click to expand...
Click to collapse
I will try this and report back. I have been installing firmware over the issue
Sent from my PC36100 using XDA App
nenadr said:
I have read somewhere in this forums that re-calibrating your screen from Settings might help, but I still didn't tied - if someone try please post results.
Click to expand...
Click to collapse
I am try before formatting and report back
Sent from my PC36100 using XDA App
nenadr said:
I have read somewhere in this forums that re-calibrating your screen from Settings might help, but I still didn't tied - if someone try please post results.
Click to expand...
Click to collapse
this worked!!
mallman said:
this worked!!
Click to expand...
Click to collapse
spoke too soon. did not work. it stopped after a few tries
it works again if i recalibrate but wont hold.
Zoidpilot said:
Thats strange... I have a similar issue with my 101: when i leave my tablet asleep for more than 20min, I can't turn it back on without doing a hard reset. Now it only happens when I simply shut off the screen and leave it alone. If I hold the power button and use deep sleep though, it works just fine. When I can't get it started I notice the little power light is on, but the screen stays black... any suggestions??
Click to expand...
Click to collapse
by the way, the deep sleep option also kills mine.
Search softlocker in market, not a perfect solution but fir me work rigth. Reduce the reboots.
Sent from my A101IT using Tapatalk
ramso said:
Search softlocker in market, not a perfect solution but fir me work rigth. Reduce the reboots.
Sent from my A101IT using Tapatalk
Click to expand...
Click to collapse
just tried it . i hit the icon to disable sleeping. i pressed the screen button and when i went to turn screen back on it would not wake. Did i use the app wrong?
No, you use the app rigth. The app only disable deepsleep.
Sent from my A101IT using Tapatalk
i had the same problem on my 32, albeit not that frequently. Downloading the FW and reflashing it seems to have made the problem go away.
You know what? Strangely enough after I replied to your post I downloaded the latest fw (2.1.4) and the problem seems to have gone away no special flash no repair I just installed and rebooted and so far no prob... I will keep testing this and post results
Edit* Ok so far so good... no problems. I'm actually surprised I'm getting better response from the device despite everyone's warnings about 2.1.4. But that's another topic. I think its just a bad install of your current FW, but I'm just guessing... My device has had the issue since I got it, I just decided to live with it but like I said the latest update fixed it... So it HAS to be the FW
bbop said:
i had the same problem on my 32, albeit not that frequently. Downloading the FW and reflashing it seems to have made the problem go away.
Click to expand...
Click to collapse
err I'm afraid that I spoke too soo. My device keeps getting stuck and won't awake from sleep. This seems to happen most after switching wifi on or off, specifically whilst the device is playing music.
Zoidpilot said:
You know what? Strangely enough after I replied to your post I downloaded the latest fw (2.1.4) and the problem seems to have gone away no special flash no repair I just installed and rebooted and so far no prob... I will keep testing this and post results
Edit* Ok so far so good... no problems. I'm actually surprised I'm getting better response from the device despite everyone's warnings about 2.1.4. But that's another topic. I think its just a bad install of your current FW, but I'm just guessing... My device has had the issue since I got it, I just decided to live with it but like I said the latest update fixed it... So it HAS to be the FW
Click to expand...
Click to collapse
how are you installing the firmware? maybe im doing it wrong. I let the device update to latest 2.1.4 and then i wiped it via the settings and repair menu in android.
Edit**
like this??:
Step 1: Download the android 2.2 firmware for your archos tablet from here,you might a get a false positive notification from your browser as they are unaware of .AOS format, so ignore that and download it.
Step 2:Go to Menu > Settings > Device Storage & USB connection > USB connection mode of your tablet and set the connection mode to Mobile Media Device (MTP) and now connect your Tablet to pc.
Step 3:Now when the tablet is detected you will see a hard drive icon,double tap and open it and copy and paste the firmware (.AOS) file into the hard drive(make sure you dont copy it in any folder inside it like Music,Videos etc).
Unplug the USB connection and the Archos device will automatically locate the update file and will prompt you for the update,just follow the screen options and you are done,if it does not prompt you for an update then you might have accidentally misplaced the file in one of the folders,just locate the .AOS file from the file manager and and open it to start the update.
No no it wasn't that complicated... It was actually the simplest fix for a difficult problem. My device when I got it was running 2.1.2 out the box... Even then It had the screen problem. When I got the chance I installed 2.1.3 OVER THE AIR. Straight from Archos. Still had the issue though, I figured it would have been fixed but was greatly disappointed... Then I sort of just lived with the problem for awhile... I saw that the 2.1.4 update was released but was wary about downloading it because sooo many people are having issues. Just the other day though, the device cut off on me again and I figured to hell with it... So I downloaded the 2.1.4 OTA as well... no website, no manual install, I just let the device run its course on its own. After the update, it rebooted normally and it's been working great since... Sorry to hear not everyone is so fortunate... I really hope this helps somewhat
My SGS2 stopped vibrating. Tried flashing, un-rooting, restoring stock and factory settings. None of these worked.
I am inclined to think that it is a hardware problem.
Has anyone else been dealing with issue? I read some posts on XDA regarding this matter but they were software related as opposed to hardware. Can anyone post instructions on how to fix it or provide any solutions for this issue?
If its hardware, why not flash stock, remove binary flash count with USB jig, and return for warranty?
Sent from my GT-I9100 using xda
premium
UpInTheAir said:
If its hardware, why not flash stock, remove binary flash count with USB jig, and return for warranty?
Sent from my GT-I9100 using xda
premium
Click to expand...
Click to collapse
Cannot get jig in Palestine. Bought the phone from the UK. Sending it back will be problematic. I will look for a repair shop.
Thanks for the quick reply
That's a "bummer" (bad luck). You could make a jig, but as you said that it would be problematic to return. Hope you can sort it easily. Sorry, can't think of anything of use right now.
Sent from my GT-I9100 using xda premium
hey there,
i got the same problem. no more vibrating at all. not with calls or notifications and not as haptic feedback. it started today (was still working in the morning), though i did not drop the phone or anything.
i am still hoping too find that it's a sw-problem. but all potential solutions i find do not help. so i guess i have to contact samsung.
but before i do that i have to get rid of all "hacking".
could you plz tell me what i have to do?
i have now cm9 20120402 nightly.
but i still have a cwm-recovery-backup of the original touchwiz (gingerbread).
-so first i make a backup of my current rom via cwm and of all my apps via titanium and store everything on my pc.
-i flash my touchwiz-backup
-i get one of those: http://www.amazon.de/s/ref=nb_sb_no...ld-keywords=Samsung+Galaxy+S2+USB+Jig&x=0&y=0 , plug it in, wait til its done and remove it again.
after that, samsung will never know i "messed" with the phone??
or do i have to consider/do something else?
tyvm!!
kws
I have the same issue.
When I was on my stock 2.3.5, I found a workaround:
- go into test mode (dial *#0*#)
- find the vibrate button, when you press it, it shouldn't work like you expect
- go back
- plug in your headphones and push the cable a bit to the left
- test vibrate again - this time it should work
- pull the cable out while vibrating, still pushed to the left, vibrations should stay on
I know it sounds crazy but it seems the hardware part that controls the vibrations is near to the jack port - excessive use of headphones, like it was case, must have damaged it somehow.
However, now I'm on CM9, so no test mode for me, I'm achieving the same effect by bashing the back button, so I get semi-constant vibration. I know, It's ridiculous.
Have the same problem here, I think it's software related because the shut down vibration stopped working when I flashed CM9 ICS, I can't remember if it was working anywhere else though. But now I'm back to 2.3.5 and it's not working at all. Did a Factory Reset, Cleaned Cache before and after the flash. Also used the Jig to reset my counter. Any clues?
I am experiencing the same issue.
Yesterday, I downgraded from 4.0.3 back to 2.3.5 as I was having a lot of problems with ICS. Now, my phone works fine again except for the fact that it does not vibrate anymore. (Which it did fine in 4.0.3 and before in 2.3.5)
I tried the trick Lechium06 mentioned in this thread but that did not work for me.
Anyone else having this issue? More important, anyone have a solution???
Greetinx
Johan
dajomas said:
I am experiencing the same issue.
Yesterday, I downgraded from 4.0.3 back to 2.3.5 as I was having a lot of problems with ICS. Now, my phone works fine again except for the fact that it does not vibrate anymore. (Which it did fine in 4.0.3 and before in 2.3.5)
I tried the trick Lechium06 mentioned in this thread but that did not work for me.
Anyone else having this issue? More important, anyone have a solution???
Greetinx
Johan
Click to expand...
Click to collapse
I saw something similar on CM9 thread, they said it could be a "bad flash", not a corrupted rom but the lack of proper cleanup before and after the flash. But I cleaned up everything before and after and I don't like reconfiguring the whole phone again for nothing.
it happend again.
dont recall what i did or if i did something last time at all. but it worked for over a year now. and now, my sgs2 doesnt vibrate at all, i tried all possible settings, tested with z-device and rebooted. nothing.
apprechiate any hint!
thx!!
kws
AW: [Q] Vibrate function doesn't work anymore, hardware issue
since i had that before, i ruled out a hardware issue. it happend when i played with the system settings. but as i sayed, i tried to reverse everything i did. now after i updated to 0206 and wiped cache and dalvik, still no vibration.
is there anything i could have missed?
is there a possibility to reset all settings to default without deleting all my data?
thx,
kws...
...tapatalking
kweso said:
since i had that before, i ruled out a hardware issue. it happend when i played with the system settings. but as i sayed, i tried to reverse everything i did. now after i updated to 0206 and wiped cache and dalvik, still no vibration.
is there anything i could have missed?
is there a possibility to reset all settings to default without deleting all my data?
thx,
kws...
...tapatalking
Click to expand...
Click to collapse
I assume since your posting in xda developers that you are rooted?
If so, just back up data with titanium backup app and factory reset, setup system and then restore USER apps and data only.
Sent from my GT-I9300 using xda premium
kweso said:
it happend again.
dont recall what i did or if i did something last time at all. but it worked for over a year now. and now, my sgs2 doesnt vibrate at all, i tried all possible settings, tested with z-device and rebooted. nothing.
apprechiate any hint!
thx!!
kws
Click to expand...
Click to collapse
Did you install another rom?
My vibration for example didn't work with some cm10.1 nightlies
it started in cm10.1 20130203. then i tried wipe cache and dalvik. nothing. then i updated to 0206 (wiped cache and dalvik again) > still nothing. went to bed. got up. everything ok! its vibration again! i am 100% sure, it did not work, when i left it on my desk last night. this morning, i checked for missed calls and it took a moment until i realized: i got haptik feedback back on patternunlock and keystrokes! checked ringtone-vibration: fine as well!
dont ask me how! would still like to know for myself.
thx,
kws
AW: [Q] Vibrate function doesn't work anymore, hardware issue
call me stupid!
suddenly this evening my phone stopped vibrating again. then i realized: quiet hours! i turned off haptik feedback at night.
could slap myself. at least ill find this thread again, next time i screw it again....
nite,
kws...
...tapatalking
Girls can use it again then. Good news for them!
Sent from the little guy
Hi All,
I have A116, which behaving bit weird. 6 months back, while on charging, it started operating on its own, when I removed it from charging, it stopped. While on charging with that particular charger, issue was there. I changed the charger, everything was OK. Recently, on a ugly morning, I answered a call at 5 am and around 6 am I tried to make a call and found that screen is absolutely irresponsive. Sometime later it unlocked on its own, started operating on its own, like opening any random app or web or anything and does some random operation. Tried to power reset the phone half a dozen time no go, removed both SIM and memory card. still the same. This has completely wiped out my phone data (phone book, all SMS, photo, mp3's video's), factory reset in other words (on its own). I was told its battery issue, changed that too. no go. . This is happening not always, it happens for a while and then behaves normal and after 5 minutes old story repeats.
The best part it had wiped out avast anti-virus too....
Any one heard of this..? Any solution without going to service center..?
thanks,
Narendra
chouna said:
Hi All,
I have A116, which behaving bit weird. 6 months back, while on charging, it started operating on its own, when I removed it from charging, it stopped. While on charging with that particular charger, issue was there. I changed the charger, everything was OK. Recently, on a ugly morning, I answered a call at 5 am and around 6 am I tried to make a call and found that screen is absolutely irresponsive. Sometime later it unlocked on its own, started operating on its own, like opening any random app or web or anything and does some random operation. Tried to power reset the phone half a dozen time no go, removed both SIM and memory card. still the same. This has completely wiped out my phone data (phone book, all SMS, photo, mp3's video's), factory reset in other words (on its own). I was told its battery issue, changed that too. no go. . This is happening not always, it happens for a while and then behaves normal and after 5 minutes old story repeats.
The best part it had wiped out avast anti-virus too....
Any one heard of this..? Any solution without going to service center..?
thanks,
Narendra
Click to expand...
Click to collapse
Try with flashing stock rom again.
Sent from my Micromax P650 using XDA Premium 4 mobile app
chouna said:
Hi All,
I have A116, which behaving bit weird. 6 months back, while on charging, it started operating on its own, when I removed it from charging, it stopped. While on charging with that particular charger, issue was there. I changed the charger, everything was OK. Recently, on a ugly morning, I answered a call at 5 am and around 6 am I tried to make a call and found that screen is absolutely irresponsive. Sometime later it unlocked on its own, started operating on its own, like opening any random app or web or anything and does some random operation. Tried to power reset the phone half a dozen time no go, removed both SIM and memory card. still the same. This has completely wiped out my phone data (phone book, all SMS, photo, mp3's video's), factory reset in other words (on its own). I was told its battery issue, changed that too. no go. . This is happening not always, it happens for a while and then behaves normal and after 5 minutes old story repeats.
The best part it had wiped out avast anti-virus too....
Any one heard of this..? Any solution without going to service center..?
thanks,
Narendra
Click to expand...
Click to collapse
Thats a big problem i think you have installed some malicious app with root permission or this is the problem with your TP. I think there might have been a problem while your TP would have been updated.
Solution:-
1. Go to micromax service center and tell them ur problem.
2. Try to flash stock rom again with sp flash tools.
3. If you are already on 4.1 than update to 4.2 else do vice versa.
Important:-TP means Touch Panel
My solution will definately help you :good:
rajneeshk said:
Try with flashing stock rom again.
Sent from my Micromax P650 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi Rakesh, let me try to do this. This is first ever i am trying to do.. hopefully this will fix the issue.
princechandela said:
Thats a big problem i think you have installed some malicious app with root permission or this is the problem with your TP. I think there might have been a problem while your TP would have been updated.
Solution:-
1. Go to micromax service center and tell them ur problem.
2. Try to flash stock rom again with sp flash tools.
3. If you are already on 4.1 than update to 4.2 else do vice versa.
Important:-TP means Touch Panel
My solution will definately help you :good:
Click to expand...
Click to collapse
HI, i just hated to go to their service center. so checking any option. will try to flash the rom..in-between by screen is broken as well.
Can i upgrade the OS too..? please advise.
chouna said:
HI, i just hated to go to their service center. so checking any option. will try to flash the rom..in-between by screen is broken as well.
Can i upgrade the OS too..? please advise.
Click to expand...
Click to collapse
the problem you are reporting is common in most canvas phones with older firmware. update the firmware
---------- Post added at 03:55 PM ---------- Previous post was at 03:20 PM ----------
it's easy. check this out.
http://forum.xda-developers.com/showthread.php?t=2292971
use factory reset to flash the new firmware. (you can root and install recovery if you want)
I faced a similar problem some time back.
I visited the service center in Azadpur(or nearby Azadpur Metro station, do not remember the exact address) and they fixed it in 30 minutes of wait time. Try visiting their service center..I had stock ROM back then though..!!
High Voltage
when u get high voltage in your supply....
it happens like this.......
no need to flash again......
praveenganesan said:
when u get high voltage in your supply....
it happens like this.......
no need to flash again......
Click to expand...
Click to collapse
BhatiaPulkit said:
I faced a similar problem some time back.
I visited the service center in Azadpur(or nearby Azadpur Metro station, do not remember the exact address) and they fixed it in 30 minutes of wait time. Try visiting their service center..I had stock ROM back then though..!!
Click to expand...
Click to collapse
you got the same old stock firmware alright. but it's the newer one. Micromax has updated their stock rom many times since android 4.1
v1 - Android 4.1.2 Initial version. Lots of bugs. You could install Flipboard app and see the entire device bricked.
v2 - Android 4.1.2 Update. Flipboard bug fixed. Yet there was another issue, which caused the touch pad to malfunction while charging. other bugs include the app storage issue. you can't install apps in external sd card and storage space was very small.
v3 - Android 4.2.1. TouchPad issue was fixed. Apps can be installed on external sd card. OTA firmware update support was added but it doesn't work.
v4 - Android 4.2.1 Update - New Camera App. OTA issue was never fixed.
v5 - the newest firmware from micromax which was launched with Micromax A116i. No bugs so far.
Micromax service center must have updated your firmware to Android 4.2.1. version 3
Ur problem was because of charging...
Voltage problem not a software problem...
Use ur own charger without any extension or any external supply...
U will not face any issue like this...
Sent from my Samsung Galaxy S4 Mini GT-I9505 using xda app-developers app
Hi guys,
This is my first post.
I just got a Sony Z2, and yesterday I updated it to latest firmware 17.1.1.A.0.402 using flashtool. After that, everytime when I switch off my phone and turn it on, the message of "...android.process.acore has stopped" appeared.
I tried to flashed the phone again using PC Companion to re-update the same firmware. I though the error message has gone but than it is still there.
I have tried several ways as mentioned in this forum but the problem seem to be there. I don't see any problem/error caused by this error message yet.
Any idea/solution to completely remove the message?
Go into settings > apps > all apps, clear all data for anything relating to contacts then all will be fine, make sure contacts are backed up tho of course
Sent from my D6503 using Tapatalk
I have tried and have not seen the message. Will keep you updated if it has conpletely gone
Sent from my D6503 using XDA Free mobile app
It should do it did for me glad I could help
Sent from my D6503 using Tapatalk
Update: It happened again when I reboot my phone today. Is it possible a firmware bug?
I should wait for the next release, hope Sony will fix this issue.
Regards,
I'm on romaur which is 402 and haven't seen this error since I wiped contacts data so not sure, you still on stock or?
Sent from my D6503 using Tapatalk
Same issue!
tuanph.aus said:
Hi guys,
This is my first post.
I just got a Sony Z2, and yesterday I updated it to latest firmware 17.1.1.A.0.402 using flashtool. After that, everytime when I switch off my phone and turn it on, the message of "...android.process.acore has stopped" appeared.
I tried to flashed the phone again using PC Companion to re-update the same firmware. I though the error message has gone but than it is still there.
I have tried several ways as mentioned in this forum but the problem seem to be there. I don't see any problem/error caused by this error message yet.
Any idea/solution to completely remove the message?
Click to expand...
Click to collapse
I also have the same issue as the OP. It particularly happened after I upgraded to .402 using PC companion.The message will appear always after restarting. My devices has not been rooted. Tried to clear data and cache for contact apps, but after restarting, the message appeared again. I am still lazy to do a re-install because aside from the message appearing only after a restart, there are no other major effect to my Z2's performance. but clearing it will be nice though.
I have the same thing when i touch the phone immediatly when it just restarted, but when i restart and leave it untill screen goes off i don't get the message.
Sent from my Xperia Z2 with the use of Tapatalk
phscyiipfer said:
I also have the same issue as the OP. It particularly happened after I upgraded to .402 using PC companion.The message will appear always after restarting. My devices has not been rooted. Tried to clear data and cache for contact apps, but after restarting, the message appeared again. I am still lazy to do a re-install because aside from the message appearing only after a restart, there are no other major effect to my Z2's performance. but clearing it will be nice though.
Click to expand...
Click to collapse
Mafiatounes said:
I have the same thing when i touch the phone immediatly when it just restarted, but when i restart and leave it untill screen goes off i don't get the message.
Sent from my Xperia Z2 with the use of Tapatalk
Click to expand...
Click to collapse
Hi guys,
Thank you for your info.
I tried to disable contact sync of Viber and I think the message has temporarily gone. Sometimes it still pop up but not as often as before I disabled the contact sync of Viber.
Apparently, this problem is caused by contact synchronisation between Viber, Facebook, Messenger, Whatsapp, etc. Other users, such as Samsung phone users, reported that they have the same issue but when they turned off contact sync of the above-mentioned apps, the error message somehow has gone.
To be honest, I have just recently switched to android from iPhone, and I have been usings iOS for years and never seen any kind of issue/error like this on iOS. However, Sony Z2 is one of the greatest phone I ever owned and I am so happy with it, specially its crazy battery life.
Hope you guys will share your solution here if someone can fix it permanently.
Cheers,
tuanph.aus said:
Hi guys,
This is my first post.
I just got a Sony Z2, and yesterday I updated it to latest firmware 17.1.1.A.0.402 using flashtool. After that, everytime when I switch off my phone and turn it on, the message of "...android.process.acore has stopped" appeared.
I tried to flashed the phone again using PC Companion to re-update the same firmware. I though the error message has gone but than it is still there.
I have tried several ways as mentioned in this forum but the problem seem to be there. I don't see any problem/error caused by this error message yet.
Any idea/solution to completely remove the message?
Click to expand...
Click to collapse
Running any Xposed Mods ?
defsix said:
Running any Xposed Mods ?
Click to expand...
Click to collapse
Nope, running original stock firmware. No jailbreak/root.
Cheers,
Update 13.06.2014: Guys, I have tried and flashed my Z2 with UK .402 and so far so good, I dont see that error message pop-up again after reboot.
Regards,
possible fix
i had this problem, amongst others stopping my phone. i pulled the sim card out, then rebooted the phone. the phone then showed it was updating all apps i let it boot up and it seemed to work. pulled battery and put sim card back in. and all ok so far. i have sent my phone 3 times away to vodafone for this repair, with android.clock stopping, android.phone stopped working and the phone actually crashing on the samsung screen and not even booting up. each time all they do is a factory reset. like duhhhh, i have never thought of that (sarcasm). i am hoping that doing this, will give my phone some sort of permanency in it's repair. i have not rooted the phone, it is stock.
Vodofone refused to replace the handset even though it had been in so many times for repair. word of advice. steer clear of vodafone. i am cancelling all my contracts with them.
sorry that went off topic, but i want a phone that works and vodafone will not help you in that matter.
tbish said:
i had this problem, amongst others stopping my phone. i pulled the sim card out, then rebooted the phone. the phone then showed it was updating all apps i let it boot up and it seemed to work. pulled battery and put sim card back in. and all ok so far. i have sent my phone 3 times away to vodafone for this repair, with android.clock stopping, android.phone stopped working and the phone actually crashing on the samsung screen and not even booting up. each time all they do is a factory reset. like duhhhh, i have never thought of that (sarcasm). i am hoping that doing this, will give my phone some sort of permanency in it's repair. i have not rooted the phone, it is stock.
Vodofone refused to replace the handset even though it had been in so many times for repair. word of advice. steer clear of vodafone. i am cancelling all my contracts with them.
sorry that went off topic, but i want a phone that works and vodafone will not help you in that matter.
Click to expand...
Click to collapse
Xperia's have unremovable batteries, maybe you should steer clear of Samsungs
Is that a good thing or a bad thing though? Cos sometimes taking a battery out is what could be needed to fix a problem.
But point taken. Perhaps a change of manufacturer would help
Sent from my GT-I9300 using XDA Free mobile app
tbish said:
Is that a good thing or a bad thing though? Cos sometimes taking a battery out is what could be needed to fix a problem.
But point taken. Perhaps a change of manufacturer would help
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
I know people who advocated pulling the battery from devices as the only answer but I've yet to come across a situation on any device which couldn't be handled with >adb reboot or a three finger reset.
There's actually a method on Xperia devices, to disconnect the battery and plug it back. It's called "Hard Reset". Yeah you don't take the battery out in reality, but this method does it in Matrix dimension. So, the consequences are the same.
I'm having issues with my calls ever since I changed my S3 configuration (ROM, kernel, apps, framework…).
On most of them, I get a soft reboot at the start or in the middle of the conversation.
I've tried changing the modem but there were no results.
How can I diagnose the problem?
Thanks.
P.D: You can see my config on my signature
It just happened again. I have read the logs but I can't figure out the problem.
Any help?
Thanks.
eXtremeDevil said:
It just happened again. I have read the logs but I can't figure out the problem.
Any help?
Thanks.
Click to expand...
Click to collapse
If you have overclocked then lower the frequency I had the same issue on another device and doing so resolved it
We'll see if that's the issue. Thanks for the tip, I'll keep you guys informed.
Have you tried changing kernels, it happened to me once from a custom kernel
Well, I'm very happy with my kernel, but if the problem persist I will consider it.
Thanks!
The problem persists. May be that I installed BusyBox from Play Store when I had it already from the ROM & Kernel?
Yeah most likely thats the problem, try flashing your rom again
Sent from my SM-G900F using XDA Free mobile app
I have uninstalled BusyBox, reflashed the ROM and changed the kernel. I'll keep you guys informed.
So far so good, the system was even better (a lot more stable) and no call reboots. But just now I've had the first one. I guess the number of call reboots have decreased (I'm not sure because it is a ramdom thing) and that's good but, again, any way of diagnose the problem?
Thanks!
EDIT
I often lose my APN settings and I had to reboot the device (a soft reboot is valid as well), may that problem be linked to the other?
I've performed a full wipe and started all over again. Let's see if this time everything works well...
Unbelievable. I did every single thing from scratch and the phone was perfect. Today I make my first call after all the mess and configuration and AGAIN, a soft reboot.
I'm 100% out of ideas here. Is there something, ANYTHING I can do to confront the problem? Some kind of log or monitoring action so I can know a litte bit more about this??
Please, I'm REALLY desperate right now…
I've installed the app SIM Card Manager and the phone field was unkwown. I rebooted and my phone showed up correctly. Maybe the app's fault or my SIM is half-broken? Or is it the phone lector?
Tomorrow I'm changing my SIM for a new one and let's see what happens, really out of ideas right now...
I think I found the cause of the problem.
This modification along with the Xposed app StatusbarVolume seems to cause the reboot when I try to change the volume when in a call.
I can't be 100% sure this is the faliure scenario because the bug is a little bit random, but I am 99% sure anyway.
EDIT
Not sure if the cause is the volume unlink, or the Statusbarvolume overlay failing to show up in call if it has never been invoked outside of a call before since the phone startup. May be a mix of the two things.