this mod is the best for ginger bread
i tried and using this
its not my mod
its developed by redstriker
original thread-http://forum.xda-developers.com/showthread.php?t=2296428
hit thanks if helped
Requirement:
1) Rooted device!
2)CWM for flashing rwoksome engine!
3)Root explorer!!
NOTE:BEFORE DOING ANYTHING YOU MUST HAVE A BACKUP OF YOUR SYSTEM!
Also,if you are using any custom mod please REMOVE it,beacuse there are chances of getting bootloop!!
Procedure:
1) Download the RWOKSOME ENGINE 2 from here
http://www.mediafire.com/?4bo9aovh99727yo
2) Flash this zip through CWM.
3) Now download VIPER!
link:http://www.mediafire.com/?pkbdfsii7ikn26l
4) Extract the correct folder according to your Android version. (Android 2.3 or Android 4.X)
5)Copy all the files inside that folder to your SD Card.
6) Use any Explorer with root access,copy libv4a_xhifi_xx.so(2.3 is gb,4.X is ics) to /system/lib/soundfx/ ,set permission to rw-r-r.
7) Now install ViPER4Android_XHiFi.apk
8) Reboot!
9)Open VIPER.apk>> Enable viper engine,Set your own parameters and ENJOY!!!!!!
Related
Check this out. http://forum.xda-developers.com/showthread.php?t=1908269
***NOTE***
You can flash this zip over any ROM, it will launch Aroma Installer and will allow you to install many tweaks and mods to speed up your ROM and add more functionality. YOU CHOOSE THE TWEAKS/MODS YOU WANT INSTALLS THROUGH A TOUCH SCREEN INTERFACE KNOWN AS AROMA INSTALLER.
Try this on *ANY ROM* for a great increase in speed. Make sure to download the correct version. (READ THE THREAD)
*****FOR THOSE WHO DOWNLOAD BEFORE READING*****
**********BEFORE FLASHING THIS PLEASE*************
- Open the zip of the rom you are running (the .zip file that you flash in recovery)
- Inside this zip, navigate to : META-INF/com/google/android
- Extract the file called "update-binary" and rename it to "update-binary-installer"
- Open Pimp my Rom's zip (i.e : PIMP_MY_ROM-v1.4.1-Universal.zip)
- Inside this zip, navigate to : META-INF/com/google/android and delete "updater-binary-installer"
- Now copy the "update-binary-installer" file you extracted from your rom to Pimp My Rom's zip (still in META-INF/com/google/android)
- Close the zip and flash it, the installation process should now work normally so you can Pimp your Rom !"
atrix4g18 said:
Check this out. http://forum.xda-developers.com/showthread.php?t=1908269
***NOTE***
You can flash this zip over any ROM, it will launch Aroma Installer and will allow you to install many tweaks and mods to speed up your ROM and add more functionality. YOU CHOOSE THE TWEAKS/MODS YOU WANT INSTALLS THROUGH A TOUCH SCREEN INTERFACE KNOWN AS AROMA INSTALLER.
Try this on *ANY ROM* for a great increase in speed. Make sure to download the correct version. (READ THE THREAD)
*****FOR THOSE WHO DOWNLOAD BEFORE READING*****
**********BEFORE FLASHING THIS PLEASE*************
- Open the zip of the rom you are running (the .zip file that you flash in recovery)
- Inside this zip, navigate to : META-INF/com/google/android
- Extract the file called "update-binary" and rename it to "update-binary-installer"
- Open Pimp my Rom's zip (i.e : PIMP_MY_ROM-v1.4.1-Universal.zip)
- Inside this zip, navigate to : META-INF/com/google/android and delete "updater-binary-installer"
- Now copy the "update-binary-installer" file you extracted from your rom to Pimp My Rom's zip (still in META-INF/com/google/android)
- Close the zip and flash it, the installation process should now work normally so you can Pimp your Rom !"
Click to expand...
Click to collapse
Is this working well for you on the TP?
edit. no longer relevant
Guys, sadly this doesn't work on the TP I tried it some time back but the TP reboots to moboot shortly after the installation begins.
It's a shame as this gives great improvements in multiple areas (I flashed it on my SGS 2 and it made wonders)
Edit: As of v2.0 it works on he TP, I highly recommend it.
Which one should i download? LDPI, MDPI, HDPI or XHDPI?
alex1301 said:
Which one should i download? LDPI, MDPI, HDPI or XHDPI?
Click to expand...
Click to collapse
I just DL DPI Changer from the market and it says my current setting is MDPI (160).
I hope this helps.
SGY Toolbox for Samsung Galaxy Y GT-S5360
A person named hnkotnis from xda-developers forums has taken this AROMA installer in use for another helpful purpose and that is a toolbox.
This toolbox is filled with neat features that allow you to root/unroot your Galaxy Y, backup and restore your kernel at any time, install bravia engine, reset pattern lock, pin or password and many more.
Features:
Rooting/Unrooting
Root your phone with basic root package. Superuser by ChainsDD, sqlite3, basic busybox, su binary.
Unroot your phone and remove all traces of root, busybox, su binary, etc.
Kernel Tools:
Backup your current kernel and save it as boot.img in root of the SD Card.
Restore kernel from boot.img stored in root of SD Card.
Odinize boot.img (You can flash output file odinized-boot.tar directly from Odin, use PDA and select file)
SwitchSu:
Remove all traces of SuperSU by Chainfire and Install Superuser by ChainsDD.
Remove all traces of Superuser by ChainsDD and install SuperSU by Chainfire.
Choose Root app and install, reboot open new app, then uninstall old app like normal app.
Old app is converted to user app, so no need to use system app uninstall and things.
Adblocking Tools:
Install mother of ad blocking host file by BSDgeek_Jake.
Install AdAway v4.7 Adblocking application.
Remove all modifications of host file & install stock host file.
Miscellaneous Tools:
Pattern Lock Reset (After you use this, enter any wrong pattern to unlock)(PIN, Password may be removed).
Bravia Engine 3 thanks to [email protected]
Kitkat Style Statubar created by hnkotnis. (REQUIRES STOCK/STOCK BASED DEODEXED ROM).
Beats Audio Engine thanks to [email protected]
Adobe Flash Player for all ROMs.
Install bootanimation. Put bootanimation.zip in root of SD Card and use this option.
Installation:
1. Download the zip file to your sdcard
2. Boot into Recovery mode and flash it
3. Now follow the on-screen instructions on what you want to use this toolbox for
4. If you are going to be installing Bravia Engine 3, Kitkat Style Statusbar, Beats Audio or Adobe Flash Installer, you must fix permissions in CWM Recovery before rebooting. When in CWM Recovery, go to advance and choose fix permissions.
Download - http://d-h.st/4bI
please search before posting as this has already been posted in this forum
offical thread
http://forum.xda-developers.com/showthread.php?t=2642331
This tool is already available in the Galaxy Y forum - there is no need to "share" it - its quite obvious you are doing this to either boost your post count or your thanks meter.
Kindly read the forum rules and search before posting.
Official thread is here >>> http://forum.xda-developers.com/showthread.php?t=2642331
Thread closed.
YOU HOLD MYSELF AND XDA FREE FROM ANY LIABILITY. WE ARE NOT RESPONSIBLE FOR YOUR DEVICE. FLASH AT YOUR OWN RISK.
I just modified the files from the previous mod of Topsnakes and uploaded them here. All credit should go to Topsnake. I even copied the instructions.
I messaged Topsnake prior to posting. He no longer has this phone and was O.K. with me posting.
This will enable Native Tether for Build 24.3.7.
Prerequisites:
Droid Maxx/Ultra Rooted w/WP off
or
Bootloader Unlocked
METHOD 1: TWRP INSTALL
1) Download the package below labeled "24.3.7-tether_twrpinstall".
2) Reboot Into TWRP recovery and navigate to the file for flashing.
3) Reboot
4) Verify tether works
5) Profit.
METHOD 2: MANUAL INSTALL
1) Download the package below labeled "24.3.7-tether".
2) Download root browser by Jrummy from the play store
3) Navigate to System/Priv-App and rename VZWEntitlementservice.apk to VzwEntitlementservice.apk.bak.
4) Navigate to System and rename the build.prop to build.prop.bak
5) Place the package on the root of your sd card and extract the build.prop file within the folder.
6) Navigate to system and Copy and paste the new file.
7) Set permissions for the file to
Owner: Read/Write
Group: Read
Others: Read
This should show (rw-r--r--)
8) Reboot. Verify tether works
9) Profit.
REVERTING
METHOD 1:
If installed in twrp, download the package below labeled 24.3.7-tether_revert. Flash in Twrp, reboot, verify subscription check re-enabled.
METHOD 2:
If manually installed, simply delete the build.prop you installed, remove the .bak extension from the original build.prop, verify permissions, reboot.
Files
Files
Nice, would you happen to have the modem too?
Will this work on the Droid Mini?
Please install it only if you're willing to take the risk of boot loops.
Requirements :
1. Root access - http://forum.xda-developers.com/showpost.php?p=66693146&postcount=144
2. SuperSu - (PlayStore) https://play.google.com/store/apps/details?id=eu.chainfire.supersu
3. Terminal Emulator - (PlayStore) - https://play.google.com/store/apps/details?id=jackpal.androidterm
4. Xposed install SDK Archive - http://dl-xda.xposed.info/framework/sdk22/arm64/xposed-v80-sdk22-arm64.zip
5. Xposed install Archive - https://www.dropbox.com/s/ussy2r53rj2fu8f/xposed_installer.zip?dl=0
6. XposedInstaller - http://forum.xda-developers.com/showthread.php?t=3034811
7. Root Explorer - https://play.google.com/store/apps/details?id=com.speedsoftware.rootexplorer
8. Stock Flyme OS 5.X.X.X
Next Step :
1. Read this to root your phone and install SuperSU: [Tutorial] http://forum.flymeos.com/forum.php?mod=viewthread&tid=1667 / http://forum.xda-developers.com/showpost.php?p=66693146&postcount=144
2. Install Terminal Eumlator: Terminal Emulator for Android
3. Install XPostedInstaller: Link to XDA
4. Download the xposed_installer + SDK archive:
5. Unpack xposed_installer.zip and put the files on your internal storage + SDK
6. Install root explorer
7. Click on install file from regular explorer/documents
8. Open with root explorer
9. Press on linux script
Please install it only if you're willing to take the risk of boot loops.
Great tutorial and thanks, just wanted to add, that if you are rooted and using Flyme 5 you can use inbuilt Xposed installer in the FlymeTools 5.
Thanks for the tutorial!!
Hi,
Dont forget to enable ADB people, so you can get in when something goes wrong.
As for people without recovery: dont risk it.
EDIT: also enable root access on boot, if anything goes wrong you have root access with adb, otherwise you have to wait until boot_complete which it will never reach.
I have found a version of v4a that works perfectly on the XZ1 and installation in simple.
NOTE! YOU MUST HAVE ROOT ENABLED TO INSTALL THIS!!!
1: Download viper4android from this location http://www.mediafire.com/file/pk567lnqxyujtba/ViPER4Android oreo romprovider.com.zip
2: Using a file manager, navigate to /vendor/etc and rename the audio_effects.conf file by adding .bak to the end after .conf
3: Power off your phone and boot into TWRP
4: Flash the downloaded v4a zip
5: Enjoy
Now we have a custom kernel thanks to @janjan with a root solution including a DRM fix thanks to @sToRm// and as @pergoteborg pointed out we also have Xposed and now we can enjoy custom tuned audio perfection thanks to yours truly.