Related
Is any able to advise me if the Telstra version of the Atrix would have similar issues to the Bell OS, if I decided to load up Motobread, Ginger blur etc etc.
Staunch said:
Is any able to advise me if the Telstra version of the Atrix would have similar issues to the Bell OS, if I decided to load up Motobread, Ginger blur etc etc.
Click to expand...
Click to collapse
I may have missed something but i followed the steps to install gingerblur and well, it bricked my Telstra atrix that I only got yesterday
Luckily i made a backup of the telstra firmware as soon as i got it so its all good. Just got no idea on how to install CF. The telstra atrix i'm assuming is the same as the AT&T atrix because they are both "Motorola Atrix MB860" but i could be missing something
Uh oh, radio's and fingerprint reader aren't working
Oh, and it also wont turn itself off!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
You guys should probably be following instructions for the Bell Atrix. Bell users have been successful at flashing the telstra firmware and then installing grey/ginger blur and so I'd start there.
Hope it helps
DarkRyoushii
PS: OMG Atrix is released in Australia now? I should go find a telstra store and check out the differences, my Atrix that I've had since launch (from AT&T then unlocked) is the only one I've actually used so I'd love to see if the bugs in mine still exist in telstra's hahaha
EDIT: Oh and if u need a briefing. Bootloader Bypass has basically dropped off the radar and turned silent, probably still being worked on in private chats to avoid spam and offtopic posts. 2nd Init works (a different way to install custom ROMs however unable to modify kernel) but there are no ROMs developed yet, probably also being worked on in private chats if you are interested check out the freenode IRC #moto-atrix
All ROMs released as of writing are pseudoROMS that only theme and lightly modify the current OS
Thanks
DarkRyoushii said:
You guys should probably be following instructions for the Bell Atrix. Bell users have been successful at flashing the telstra firmware and then installing grey/ginger blur and so I'd start there.
Hope it helps
DarkRyoushii
Click to expand...
Click to collapse
I had a really bad feeling that that would be the case. Bell users appear to have a limited range of options compaired to the AT&T users. Now it seems that the Telstra users will have even less options than the Bell users.
I have at least managed to load HeLauncher, Pyramid & Fancy widgets tonight and now I've have more of the options that I wanted from the HTC desire sense UI.
Still trying to work out how to get my hands on the widget/live weather wallpaper that has that Super Cool looking windscreen wiper that clears the rain away.... Any ideas on how to get ahold of it?
Thanks again.
limited how? what version is your telstra rom? (wondering if its the same as the one that is already on this site)
as for the windshield wiper, that is from sense....oh i see you found the mock sense thread.
y2whisper said:
limited how? what version is your telstra rom? (wondering if its the same as the one that is already on this site)
as for the windshield wiper, that is from sense....oh i see you found the mock sense thread.
Click to expand...
Click to collapse
My system version is;
Version.4.1.47,MB860.Telstra.en.AU
Thanks for the info, I will start looking for the other one on this site.
So i can guess we can all agree that Telstra's Atrix cannot be flashed with custom ROM's from AT&T. I just tried it again tonight with different roms and all works up, shows "Ginger Blur" or whatever it is and then the red blinking failed boot and it just tries over and over to boot. I'm gonna flash back to OLYEM_U4_1.4.2_SIGNED_USAOLYEMTELSTRA_P029_A020_M005_HWolympus_1g_1FF and just sit and wait till something comes up unless someone's got something they wanna try
they should be able to flash using the gingerblur/greyblur guide by seven2009. you may not be able to deodex with the same instructions but installing should be fine, you would need to flash grey blur and factory reset the device before installing gingerblur.
If that route doesn't work you may need to start by flashing the french rom that is mentioned in that thread first.
makmegs said:
So i can guess we can all agree that Telstra's Atrix cannot be flashed with custom ROM's from AT&T. I just tried it again tonight with different roms and all works up, shows "Ginger Blur" or whatever it is and then the red blinking failed boot and it just tries over and over to boot. I'm gonna flash back to OLYEM_U4_1.4.2_SIGNED_USAOLYEMTELSTRA_P029_A020_M005_HWolympus_1g_1FF and just sit and wait till something comes up unless someone's got something they wanna try
Click to expand...
Click to collapse
You are doing better than me so far, but I must admit that going for custom ROM's has me a bit worried. I flashed my Nokia 5800 and it was better for looks and customisation, but it crashed alot. Then I jail breaked my iSheep (iphone 3G) and that was a little better than stock iOS, but it also crashed alot too.
I am hesitant to play around too much with the Atrix, simply because it's so new, and I was patient enough to wait for the Telstra release (instead of an imported AT&T version). However I found this thread that may shed some light on the topic at hand.
http://forums.whirlpool.net.au/forum-replies.cfm?r=29747620#r29747620
User "LeChuck" has some great knowledge and info about this Telstra firmware.
I am just not adventurous enough at the moment to have a crack at it. All I need to do, is find out how I could hard reset back to stock firmware if I don't like mods, then i'll give it a go. Even since rooted it over the weekend, I've notice3d more little issues each day I play around with things.
Can it be "Un-rooted" (is that an actual term used???) back to standard?
DarkRyoushii said:
You guys should probably be following instructions for the Bell Atrix. Bell users have been successful at flashing the telstra firmware and then installing grey/ginger blur and so I'd start there.
Hope it helps
DarkRyoushii
PS: OMG Atrix is released in Australia now? I should go find a telstra store and check out the differences, my Atrix that I've had since launch (from AT&T then unlocked) is the only one I've actually used so I'd love to see if the bugs in mine still exist in telstra's hahaha
EDIT: Oh and if u need a briefing. Bootloader Bypass has basically dropped off the radar and turned silent, probably still being worked on in private chats to avoid spam and offtopic posts. 2nd Init works (a different way to install custom ROMs however unable to modify kernel) but there are no ROMs developed yet, probably also being worked on in private chats if you are interested check out the freenode IRC #moto-atrix
All ROMs released as of writing are pseudoROMS that only theme and lightly modify the current OS
Click to expand...
Click to collapse
I have a buggy unlocked AT&T Atrix too and have been waiting for it to come out in OZ to flash it with either the Telstra Rom or something else. Can you (or anyone) make a suggestion?
procedure of installing custom rom
procedure of installing custom rom on atrix details are below.
system version: 45.0.20.mb860.telstra.en.au
model number:mb860
android versoin:2.3.4
basband version : N_01.100.00R
Webtop version: WT-1.20-133_23
Kernal version [email protected] #7
APflex version : GAS_Asia_usaolygbautel_p013,a012,m001
build number: 4.5.2A-74_OLE-20
shanitop_you said:
procedure of installing custom rom on atrix details are below.
Click to expand...
Click to collapse
You mean, you would like the procedure of installing a custom ROM on those specs? I would too.
It's mainly the BL unlock process I am not sure about on Telstra Atrix of the same spec. I'm comfortable with the rest.
I have a HTC One AT&T Version Unlocked. My sense version is 5.0 and android version is 4.3. How to update it? I have also haviong issues on activating WiFi hotspot, every time i am enabling that, an error would occur and it says that contach att.com/mywireless or call 611 what to do.?/ I have searched on google and found that, they adviced me to change my at&t phone into google play editio using bootloader process. Is it safe to do?? and if not is there any other process to do. the main thing i am in india now. help me please help me???
I had similar problems with my HTC One at&t version. However, there's a separate section for at&t htc one related issues, you can see there. Also, you might take a look into the links on my signature.
hmm
I have done that also i have posted on htc one forum also bit i dint get any reply there. I want to update its sense to 6.0 and android to 4.4.2 and also wanna usse the wifi hotspot what to do?
You can convert to Developer Edition. You will get Sense 6.0 update ota immediately. You can also flash the at&t sense 6.0 ota via stock recovery. For both the cases you will need s-off. You can follow the tutorial on my signature.
None of the stock roms have tethering unlocked without appropriate service plan,you will need to flash a developer build or international rom that have tethering unlocked.
Daluvgurushine said:
I have a HTC One AT&T Version Unlocked. My sense version is 5.0 and android version is 4.3. How to update it? I have also haviong issues on activating WiFi hotspot, every time i am enabling that, an error would occur and it says that contach att.com/mywireless or call 611 what to do.?/ I have searched on google and found that, they adviced me to change my at&t phone into google play editio using bootloader process. Is it safe to do?? and if not is there any other process to do. the main thing i am in india now. help me please help me???
Click to expand...
Click to collapse
Q&A for [ROM][Galaxy Light T399][ANG6] LightWave V3[Fast]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Will this custom ROM unlock the phone?
I have bought this phone from T-Mobile, but chose the wrong option when buying (not the unlocked one) and now the only way I could find to unlock the phone would be paying for the network unlock code (around $30).
Would anyone know if by flashing this ROM it will unlock the phone to use another carrier's SIM card?
Any other option on how to unlock the phone using another method would also be greatly appreciated.
No, the custom ROM will not unlock the phone
Spuqui said:
I have bought this phone from T-Mobile, but chose the wrong option when buying (not the unlocked one) and now the only way I could find to unlock the phone would be paying for the network unlock code (around $30).
Would anyone know if by flashing this ROM it will unlock the phone to use another carrier's SIM card?
Any other option on how to unlock the phone using another method would also be greatly appreciated.
Click to expand...
Click to collapse
Already found the answer to my own question. I flashed the custom ROM to the locked phone and tried to place a SIM card in it, but still get the Invalid SIM card message and it requests the network unlock code.
I can also say that kitkat metropcs twrp backup works on the Univision variant and it works with a sim card from another country, thanks!!
EDIT: This ROM won't unlock your phone, this is another part of the device that is not dependant on the rom, to unlock you'll need an unlocking box like z3x, or pay for an imei unlock code, mine could be unlocked with 13 dlls from unlockscout, samsungs made in china.
What is the version 4.4 or 4.2?
Dogg_mc said:
What is the version 4.4 or 4.2?
Click to expand...
Click to collapse
4.4.2
Phone is now unlocked and updated to Kit Kat
Indeed, the part of the phone responsible for the network lock is not messed with by the custom ROM or the update to Kit Kat method, but I actually found a way to unlock without a z3x box or having to buy the unlock code online.
The phone I was trying to unlock is a friend's phone, but I have my own phone and it was bought already unlocked, and is the same model. The trick here was to find out that the network code lock was part of the EFS partition. I made a full backup of my phone (unlocked) through TWRP and restored it in my friend's phone. It did unlock. Then it was just a matter of resetting to factory defaults and performing the procedure to update to Kit Kat and it now is unlocked and updated. \o/
Spuqui said:
Indeed, the part of the phone responsible for the network lock is not messed with by the custom ROM or the update to Kit Kat method, but I actually found a way to unlock without a z3x box or having to buy the unlock code online.
The phone I was trying to unlock is a friend's phone, but I have my own phone and it was bought already unlocked, and is the same model. The trick here was to find out that the network code lock was part of the EFS partition. I made a full backup of my phone (unlocked) through TWRP and restored it in my friend's phone. It did unlock. Then it was just a matter of resetting to factory defaults and performing the procedure to update to Kit Kat and it now is unlocked and updated. \o/
Click to expand...
Click to collapse
Heres my question, if the phone is from tmobile how did you get kitkat? Unless you did it with the METRO backup
cm version
Thanks. Looking forward for that CM ROM.
One potentially noob question: cm11 is based on 4.4 while this device is officially still 4.2.2. Would that be OK?
Yes thats why people started making xustom roms
tazmaniondvl said:
Heres my question, if the phone is from tmobile how did you get kitkat? Unless you did it with the METRO backup
Click to expand...
Click to collapse
I read somewhere that someone was trying to download KK update from T-Mobile this could be just a 4.2 update or they could be pushing it. Maybe new lights are shipping with KK as well who knows
---------- Post added at 06:44 AM ---------- Previous post was at 06:41 AM ----------
mehmetneset said:
Thanks. Looking forward for that CM ROM.
One potentially noob question: cm11 is based on 4.4 while this device is officially still 4.2.2. Would that be OK?
Click to expand...
Click to collapse
There are many phones who are stuck on outdated firmware. Gnex, nexus s, htc mytouch 4g/slide all running kit Kat. Many many more examples. The Roms may not be stable due to various reasons (no source, outdated hardware, lack of Dev etc) it is possible
Is there a test that will show if a phone is locked or not. I hosed my efs partition a while back and had to format it, change permissions, and reset to factory default to get my Galaxy Light to boot. Does that mean that my phone is unlocked?
tazmaniondvl said:
Heres my question, if the phone is from tmobile how did you get kitkat? Unless you did it with the METRO backup
Click to expand...
Click to collapse
Yes, I did it with the MetroPCS backup. Tried to flash the kernel of KitKat straight from the T-Mobile system on 4.2.2 but it did not work.
mehmetneset said:
Thanks. Looking forward for that CM ROM.
One potentially noob question: cm11 is based on 4.4 while this device is officially still 4.2.2. Would that be OK?
Click to expand...
Click to collapse
The work I'm doing is based on the metro PCs released kernel source and device files which are 4.4. They have the same everything just different bloat from carrier.
GJSmith3rd said:
Is there a test that will show if a phone is locked or not. I hosed my efs partition a while back and had to format it, change permissions, and reset to factory default to get my Galaxy Light to boot. Does that mean that my phone is unlocked?
Click to expand...
Click to collapse
I believe you are looking for an app that is able to test if the phone is network locked or not. I do not know of such an app. The basic test you can do is try to insert a SIM card from another operator and see if it allows it or displays the message of it being an invalid SIM, asking for the network unlock code. And you don't need to buy another SIM, just borrow a friend's, it will only take a minute...
Thanks, that's my little problem in that I don't have access to a micro or mini SIM like the one in this device.
Anyone know where the boot animation is? Or how to change it?
tazmaniondvl said:
Anyone know where the boot animation is? Or how to change it?
Click to expand...
Click to collapse
Here's a thread about it http://forum.xda-developers.com/showthread.php?t=2611682
Greetings XDA Zombies!
Got the T399NUVUANH1 working on my T-Mobile T399. Having issues getting ViPER4Android FX drivers to work. Have BusyBox Pro and seems that it wont install property. The ViPER4 2.3 version says the drivers are installed but actually not working, and the ViPER4 4.x version I keep getting the drivers failed.
Appreciate any help.
Footnote: X Tether works!
Bummer. Think TMO watching XDA and clamping down on whatever loose ends they can bind.
Metropcs GL
Will this work on a galaxy light with Android 4.4.3? Does the build have to be the same?
Hi guys,
One question for my HTC one m7. I had trouble with my phone not being able to update being at&t locked, So I rooted the phone and installed CM12 unofficial Cynogenmod lollipop 5.0.2 and gapps, all that stuff.
I turned the phone on and it works fine but some things are missing. I don't have beats audio anymore, blink feed, Can't remove long google speech/search bar that's just below status bar and things like that.
Any suggestions? and if, please leave a link.
Many thanks
Goran
Rannngo said:
Hi guys,
One question for my HTC one m7. I had trouble with my phone not being able to update being at&t locked, So I rooted the phone and installed CM12 unofficial Cynogenmod lollipop 5.0.2 and gapps, all that stuff.
I turned the phone on and it works fine but some things are missing. I don't have beats audio anymore, blink feed, Can't remove long google speech/search bar that's just below status bar and things like that.
Any suggestions? and if, please leave a link.
Many thanks
Goran
Click to expand...
Click to collapse
If you s-off you can RUU back to Stock
if not flash my Guru reset >> https://www.androidfilehost.com/?fid=23501681358545274
So let's say I s-off and RUU back to stock. Will I then receive updates? at least 4.4 kit kat? Or will I again be at&t bound?
Sorry if it's a stupid question. I'm just a regular cell phone user and I did all o these things on my own. Basically I just want my phone to be free from at&t and to receive or download and install official software/updates.
Thanks
Rannngo said:
So let's say I s-off and RUU back to stock. Will I then receive updates? at least 4.4 kit kat? Or will I again be at&t bound?
Sorry if it's a stupid question. I'm just a regular cell phone user and I did all o these things on my own. Basically I just want my phone to be free from at&t and to receive or download and install official software/updates.
Thanks
Click to expand...
Click to collapse
See my post here for converting to the Developer Edition
http://forum.xda-developers.com/showpost.php?p=58087799&postcount=11
I have stock rom from nandroid backup that i've downloaded. android 4.4.2.
So the question goes like that, AT&T release the OTA 4.4.4 yet?
If so, why can't i see the OTA?
I have stock root does it a problem ? should i remove root? if so how i do that?
I need to make stock bootloader and all that stuff?
Last question, when AT&T will release the android lolipop 5 ?
ben33891471 said:
I have stock rom from nandroid backup that i've downloaded. android 4.4.2.
So the question goes like that, AT&T release the OTA 4.4.4 yet?
If so, why can't i see the OTA?
I have stock root does it a problem ? should i remove root? if so how i do that?
I need to make stock bootloader and all that stuff?
Last question, when AT&T will release the android lolipop 5 ?
Click to expand...
Click to collapse
I hesitate to answer this because so much is already in posts and threads....
1. AT&T has released the 4.4.4 OTA already
2. I don't know why you can't see it. Are you using an AT&T SIM card? Are you logged onto the AT&T network?
3. Root doesn't matter, but a stock recovery is required to actually install the update (but not to download it)
4. Stock bootloader isn't required. I don't know if it needs to be locked or not (probably not - just guessing).
5. Please contact AT&T for the answer to your version 5 update question.
DanGeorges said:
I hesitate to answer this because so much is already in posts and threads....
1. AT&T has released the 4.4.4 OTA already
2. I don't know why you can't see it. Are you using an AT&T SIM card? Are you logged onto the AT&T network?
3. Root doesn't matter, but a stock recovery is required to actually install the update (but not to download it)
4. Stock bootloader isn't required. I don't know if it needs to be locked or not (probably not - just guessing).
5. Please contact AT&T for the answer to your version 5 update question.
Click to expand...
Click to collapse
about 2, i dont think..
about 3, how i flash or whatever it called, the stock recovery?
ben33891471 said:
about 2, i dont think..
about 3, how i flash or whatever it called, the stock recovery?
Click to expand...
Click to collapse
If you're not using an AT&T SIM card or on the AT&T network, you will not be able to receive an update from AT&T. I'm not sure how you thought that might happen.
Please search this XDA forum on how to install a recovery (stock or otherwise). There are LOTS of threads on this. And if you don't know what it is, you probably shouldn't be mucking around with your phone yet. Read as much as possible first - If you don't, you'll be asking how to unbrick your phone.
DanGeorges said:
If you're not using an AT&T SIM card or on the AT&T network, you will not be able to receive an update from AT&T. I'm not sure how you thought that might happen.
Please search this XDA forum on how to install a recovery (stock or otherwise). There are LOTS of threads on this. And if you don't know what it is, you probably shouldn't be mucking around with your phone yet. Read as much as possible first - If you don't, you'll be asking how to unbrick your phone.
Click to expand...
Click to collapse
I'm from Israel so i dont think i connected to AT&T network.. My phone is from at&t but my carrer newtork is Orange(Israel)
So that means i can't update my phone ever?
kinda weird, my brother have m8 but T- Mobile and he is already have recived the OTA 4.44 a long time ago.
ben33891471 said:
I'm from Israel so i dont think i connected to AT&T network.. My phone is from at&t but my carrer newtork is Orange(Israel)
So that means i can't update my phone ever?
kinda weird, my brother have m8 but T- Mobile and he is already have recived the OTA 4.44 a long time ago.
Click to expand...
Click to collapse
OK - here's the scoop:
1. If you've put an Orange SIM card into your unlocked HTC One M8 (AT&T branded), it is an Orange device now. AT&T is just a label on the phone (logo on the lower back of the device).
2. If Orange Israel releases an update, you will most likely get it. Both T-Mobile and AT&T released updates about a month ago, which is why your brother got the update on T-Mobile.
3. You can still update your M8 to version 4.4.4 - but you'll need to ensure you have the proper firmware installed or you'll have problems. Version 4.4.4 has a different data structure than 4.4.2.
Again - read up on the general and Q/A threads on this forum. You can get your device updated to whatever version you want, it's just a matter of reading.
DanGeorges said:
OK - here's the scoop:
1. If you've put an Orange SIM card into your unlocked HTC One M8 (AT&T branded), it is an Orange device now. AT&T is just a label on the phone (logo on the lower back of the device).
2. If Orange Israel releases an update, you will most likely get it. Both T-Mobile and AT&T released updates about a month ago, which is why your brother got the update on T-Mobile.
3. You can still update your M8 to version 4.4.4 - but you'll need to ensure you have the proper firmware installed or you'll have problems. Version 4.4.4 has a different data structure than 4.4.2.
Again - read up on the general and Q/A threads on this forum. You can get your device updated to whatever version you want, it's just a matter of reading.
Click to expand...
Click to collapse
That's such a headache .. I'll just stay with the nandrid backup i guess.. i almost bricked my phone a month ago, but fixed it somehow..
This whole thing is complicated.. was so much easier on the galaxy 4 to flash roms and what not..
ben33891471 said:
That's such a headache .. I'll just stay with the nandrid backup i guess.. i almost bricked my phone a month ago, but fixed it somehow..
This whole thing is complicated.. was so much easier on the galaxy 4 to flash roms and what not..
Click to expand...
Click to collapse
Question - is the ROM on your phone from AT&T or from Orange, or was it flashed from some other source? The ROM is specific to a device, not a carrier, so you SHOULD be able to flash the ROM of your choice, as long as it works with the device (but keep in mind the fact that you will need a ROM for the GSM version of the M8, as opposed to, say, a Verizon or Sprint variant).
If it's from AT&T, you may be able to apply the updates from saved OTA file (not sure how to apply, but it can be done).
DanGeorges said:
Question - is the ROM on your phone from AT&T or from Orange, or was it flashed from some other source? The ROM is specific to a device, not a carrier, so you SHOULD be able to flash the ROM of your choice, as long as it works with the device (but keep in mind the fact that you will need a ROM for the GSM version of the M8, as opposed to, say, a Verizon or Sprint variant).
If it's from AT&T, you may be able to apply the updates from saved OTA file (not sure how to apply, but it can be done).
Click to expand...
Click to collapse
This is a nandroid backup and yes this one is AT&T rom.
I want to flash the ViperOne 3.2.1. i've been with 1.7.1 version but didn't really like it. a lot of bugs..
I want something with lollipop 5. and a STRONG battery , of course a smoothly rom with no bugs.
ben33891471 said:
This is a nandroid backup and yes this one is AT&T rom.
I want to flash the ViperOne 3.2.1. i've been with 1.7.1 version but didn't really like it. a lot of bugs..
I want something with lollipop 5. and a STRONG battery , of course a smoothly rom with no bugs.
Click to expand...
Click to collapse
I flashed Viper 3.2.1, and it worked nicely. Make sure to update your firmware before installing.
I also tried an L version 5 ROM, but didn't like the fact that it didn't work with Xposed modules, which I like and use.
DanGeorges said:
OK - here's the scoop:
1. If you've put an Orange SIM card into your unlocked HTC One M8 (AT&T branded), it is an Orange device now. AT&T is just a label on the phone (logo on the lower back of the device).
2. If Orange Israel releases an update, you will most likely get it. Both T-Mobile and AT&T released updates about a month ago, which is why your brother got the update on T-Mobile.
Click to expand...
Click to collapse
These points are not correct. Yes, the phone is being run on the OP's local network Orange (not AT&T). But the phone will only receive and be able to install an Orange OTA if its on Orange software and Orange CID/MID. If its running AT&T software, it will not receive OTA is most foreign countries. AT&T is the oddball here, as most other variants will still update on other networks. AT&T devices must be connected to the AT&T network to get official OTA.
The way to update the device by official means (when not on AT&T's network) would be the AT&T RUU.
---------- Post added at 10:33 AM ---------- Previous post was at 10:26 AM ----------
ben33891471 said:
That's such a headache ...
Click to expand...
Click to collapse
If you don't want such headaches, don't buy carrier branded US devices for use in other countries. I strongly believe this.
ben33891471 said:
I'll just stay with the nandrid backup i guess.. i almost bricked my phone a month ago, but fixed it somehow..
Click to expand...
Click to collapse
You didn't "almost brick" the device. A brick means that you phone is totally inoperable to the point the screen doesn't even power on; and the only way to recover is by opening the phone and JTAG or replacing the mainboard.
You probably just put the phone in a condition where it would not boot; which is a fairly common issue that crops up for just about anyone modding phones, at one time or another. And how to recover from such conditions is pretty basic info; and something anyone who is modding phones should now how to do.
I'm sorry if any of this seems harsh. But I believe the above to be more FACT than opinion, and for your own good. I agree with the former notions that you (and anyone who want to mod the hone) should always research thoroughly and understand before messing with the phone.
---------- Post added at 10:35 AM ---------- Previous post was at 10:33 AM ----------
ben33891471 said:
Last question, when AT&T will release the android lolipop 5 ?
Click to expand...
Click to collapse
God knows. There is never any firm release date for AT&T (one of the many reasons to avoid US carrier branded devices if you are in another country). They just released 4.4.4 a couple weeks ago. It was delayed for months due to issues implementing Voice Over LTE. Hopefully, the LP update won't suffer the same length of delay.
redpoint73 said:
These points are not correct. Yes, the phone is being run on the OP's local network Orange (not AT&T). But the phone will only receive and be able to install an Orange OTA if its on Orange software and Orange CID/MID. If its running AT&T software, it will not receive OTA is most foreign countries. AT&T is the oddball here, as most other variants will still update on other networks. AT&T devices must be connected to the AT&T network to get official OTA.
The way to update the device by official means (when not on AT&T's network) would be the AT&T RUU.
---------- Post added at 10:33 AM ---------- Previous post was at 10:26 AM ----------
If you don't want such headaches, don't buy carrier branded US devices for use in other countries. I strongly believe this.
You didn't "almost brick" the device. A brick means that you phone is totally inoperable to the point the screen doesn't even power on; and the only way to recover is by opening the phone and JTAG or replacing the mainboard.
You probably just put the phone in a condition where it would not boot; which is a fairly common issue that crops up for just about anyone modding phones, at one time or another. And how to recover from such conditions is pretty basic info; and something anyone who is modding phones should now how to do.
I'm sorry if any of this seems harsh. But I believe the above to be more FACT than opinion, and for your own good. I agree with the former notions that you (and anyone who want to mod the hone) should always research thoroughly and understand before messing with the phone.
Click to expand...
Click to collapse
Correct. I updated my responses - I thought that the OP had an Orange M8 ROM installed.
ben33891471 said:
I want something with lollipop 5. and a STRONG battery , of course a smoothly rom with no bugs.
Click to expand...
Click to collapse
Since there is no LP stock ROM or "official" firmware for AT&T, you won't be able to run Sense LP at this time unless you have s-off (and can then update the firmware by "unofficial" means).
You can however flash a Lollipop GPE or AOSP ROM, but you will still likely need to update to at least Android 4.4.4 to get a firmware and/or hboot that supports the specific ROM.
Battery and performance are always going to vary from one user to the next. Variables such as how one uses the phones; and especially your local reception will greatly impact battery life. There is never going to be one ROM that has "strong" battery for every user in every situation. Your best bet is to try the ROMs out, and see what works best for your situation.
DanGeorges said:
I flashed Viper 3.2.1, and it worked nicely. Make sure to update your firmware before installing.
I also tried an L version 5 ROM, but didn't like the fact that it didn't work with Xposed modules, which I like and use.
Click to expand...
Click to collapse
Alright , there is a nandroid backup 4.4.4? i think this is the only way i can update my phone, if this possible.
redpoint73 said:
These points are not correct. Yes, the phone is being run on the OP's local network Orange (not AT&T). But the phone will only receive and be able to install an Orange OTA if its on Orange software and Orange CID/MID. If its running AT&T software, it will not receive OTA is most foreign countries. AT&T is the oddball here, as most other variants will still update on other networks. AT&T devices must be connected to the AT&T network to get official OTA.
The way to update the device by official means (when not on AT&T's network) would be the AT&T RUU.
---------- Post added at 10:33 AM ---------- Previous post was at 10:26 AM ----------
If you don't want such headaches, don't buy carrier branded US devices for use in other countries. I strongly believe this.
You didn't "almost brick" the device. A brick means that you phone is totally inoperable to the point the screen doesn't even power on; and the only way to recover is by opening the phone and JTAG or replacing the mainboard.
You probably just put the phone in a condition where it would not boot; which is a fairly common issue that crops up for just about anyone modding phones, at one time or another. And how to recover from such conditions is pretty basic info; and something anyone who is modding phones should now how to do.
I'm sorry if any of this seems harsh. But I believe the above to be more FACT than opinion, and for your own good. I agree with the former notions that you (and anyone who want to mod the hone) should always research thoroughly and understand before messing with the phone.
---------- Post added at 10:35 AM ---------- Previous post was at 10:33 AM ----------
God knows. There is never any firm release date for AT&T (one of the many reasons to avoid US carrier branded devices if you are in another country). They just released 4.4.4 a couple weeks ago. It was delayed for months due to issues implementing Voice Over LTE. Hopefully, the LP update won't suffer the same length of delay.
Click to expand...
Click to collapse
I don't know what RUU means.. There is a simple way to update to 4.4.4 ?
redpoint73 said:
Since there is no LP stock ROM or "official" firmware for AT&T, you won't be able to run Sense LP at this time unless you have s-off (and can then update the firmware by "unofficial" means).
You can however flash a Lollipop GPE or AOSP ROM, but you will still likely need to update to at least Android 4.4.4 to get a firmware and/or hboot that supports the specific ROM.
Battery and performance are always going to vary from one user to the next. Variables such as how one uses the phones; and especially your local reception will greatly impact battery life. There is never going to be one ROM that has "strong" battery for every user in every situation. Your best bet is to try the ROMs out, and see what works best for your situation.
Click to expand...
Click to collapse
ben33891471 said:
I don't know what RUU means.. There is a simple way to update to 4.4.4 ?
Click to expand...
Click to collapse
RUU = ROM update utility. Its an official .exe (Windows PC required) that completely re-images the phone, including stock ROM, stock recovery and all firmware.
If this is the path you choose, its pretty simple:
Download the RUU to your PC.
Backup any personal data, as the phone will be wiped by RUU.
Connect the phone to PC in fastboot mode.
Relock the bootloader with command fastboot oem lock (not required with s-off).
Simply run the RUU .exe, and it will do the rest (you click a few confirmations dialogs, but that is it).
RUU and more detailed instructions at the following link, under "Manual system update instructions": http://www.htc.com/us/support/htc-one-m8-att/news/
As RUU installs stock recovery, you will need to unlock the bootloader again, and flash custom recovery again if you want to root or flash custom ROMs.
redpoint73 said:
RUU = ROM update utility. Its an official .exe (Windows PC required) that completely re-images the phone, including stock ROM, stock recovery and all firmware.
If this is the path you choose, its pretty simple:
Download the RUU to your PC.
Backup any personal data, as the phone will be wiped by RUU.
Connect the phone to PC in fastboot mode.
Relock the bootloader with command fastboot oem lock (not required with s-off).
Simply run the RUU .exe, and it will do the rest (you click a few confirmations dialogs, but that is it).
RUU and more detailed instructions at the following link, under "Manual system update instructions": http://www.htc.com/us/support/htc-one-m8-att/news/
As RUU installs stock recovery, you will need to unlock the bootloader again, and flash custom recovery again if you want to root or flash custom ROMs.
Click to expand...
Click to collapse
Which ROM do you think the best. I'm thinking about ViperOne 3.2.1 , Android Revolution hd 34.0 or CM 12 .
I really like the design of the CM12 but i heard that the boomsound ain't works, is that true? that's means the quality of the speakers will be very bad?
ben33891471 said:
Which ROM do you think the best. I'm thinking about ViperOne 3.2.1 , Android Revolution hd 34.0 or CM 12 .
I really like the design of the CM12 but i heard that the boomsound ain't works, is that true? that's means the quality of the speakers will be very bad?
Click to expand...
Click to collapse
I don't believe in recommending "best" ROMs. What's best for me, may no be the best for you. Especially since our network requirements are very different. And the choice of ROM is also largely a matter of personal preference and taste. In fact, until recently the XDA rules did not allow posting of "best ROM" threads as the discussions are largely irrelevant, and just resulted in fanboy pissing contests.
You really can't go wrong with any of the mentioned ROMs.
Although be aware that current ARHD is based on Android 5.0. So you need to update to Lollipop firmware or else suffer major bugs (broken WiFi is the most common). For the AT&T version of this phone, you can only update to LP firmware if you have s-off (until a LP is released by AT&T, for you by RUU).
Yes, any features that require Sense framework will not be present on CM12, including Boomsound and dual camera. Whether the sound is "bad" or not, I can't say. I'm not a CM12 user. But remember that Boomsound is just a software enhancement. The high quality of the speakers (for a smartphone) is largely a factor in the sound quality. If you like CM12 design, why not flash it (once on the proper hboot) and see for yourself what you think?
redpoint73 said:
I don't believe in recommending "best" ROMs. What's best for me, may no be the best for you. Especially since our network requirements are very different. And the choice of ROM is also largely a matter of personal preference and taste. In fact, until recently the XDA rules did not allow posting of "best ROM" threads as the discussions are largely irrelevant, and just resulted in fanboy pissing contests.
You really can't go wrong with any of the mentioned ROMs.
Although be aware that current ARHD is based on Android 5.0. So you need to update to Lollipop firmware or else suffer major bugs (broken WiFi is the most common). For the AT&T version of this phone, you can only update to LP firmware if you have s-off (until a LP is released by AT&T, for you by RUU).
Yes, any features that require Sense framework will not be present on CM12, including Boomsound and dual camera. Whether the sound is "bad" or not, I can't say. I'm not a CM12 user. But remember that Boomsound is just a software enhancement. The high quality of the speakers (for a smartphone) is largely a factor in the sound quality. If you like CM12 design, why not flash it (once on the proper hboot) and see for yourself what you think?
Click to expand...
Click to collapse
The RUU file isn't open. I boot into bootloader and type the command but then this says something failed and reboot my device. Then i boot into fastboot again and i saw its says relocked so i guess that's ok.
Fine, tried to plug into my PC while the phone is awake and open, the file can't seems to open, not even when i plug it while im in the bootloader.
did i do something wrong?
ben33891471 said:
The RUU file isn't open. I boot into bootloader and type the command but then this says something failed and reboot my device. Then i boot into fastboot again and i saw its says relocked so i guess that's ok.
Fine, tried to plug into my PC while the phone is awake and open, the file can't seems to open, not even when i plug it while im in the bootloader.
did i do something wrong?
Click to expand...
Click to collapse
Make sure you have HTC drivers installed on your PC. Phone should be connected in in fastboot mode.
If the RUU application doesn't even open, it doesn't sound like an issue with the phone. Even if there was an issue with the phone (wrong RUU , unlocked bootloader, etc.) the RUU would still open and start to run, but it would just give you an error message telling you what was wrong. Maybe just a bad download, try to download again.
redpoint73 said:
Make sure you have HTC drivers installed on your PC. Phone should be connected in in fastboot mode.
If the RUU application doesn't even open, it doesn't sound like an issue with the phone. Even if there was an issue with the phone (wrong RUU , unlocked bootloader, etc.) the RUU would still open and start to run, but it would just give you an error message telling you what was wrong. Maybe just a bad download, try to download again.
Click to expand...
Click to collapse
Bro, i managed to upgrade to 4.4.4 . I flashed ViperOne 3.2.1 at first, didn't like it, so i tried android revolution hd 34.0 and this ROM is amazing, love the design love it!
Have only 2 problems so far, first, the TV app , just got every 1-2 min a message: TV stopped .. so i kinda deleted this, but fine i can live without it.
But the problem that actually do me a troubles, is the screenshot, when i try to take a shot of my screen it's says. couldn't take a screenshot, not remaining space or program does not support..
Sorry about my English if you can't understand what i say..