Okay, so Im trying to update my phone to the latest through the LG mobile support tool.. It tells me I have an update available.. so I start it, and it gets to the point where it says its downloading software.. but it just sits here.. the loading bar disappeared.. and the time elapsed is stuck at :28 seconds.. anyone know why this is happening?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is what my screen is stuck at.. Is this correct? Is it normal? Ive read a couple other people having the same problem, cant seem to figure out if I need to just wait FOREVER for it to finish, or if something is going wrong
Here is the log file I believe
15:10:52 : Start Date : 2014-04-12 15:10:52
15:10:52 : -------- QM_Version mode ---------
15:10:52 : ***** Check Tool Version *****
15:10:52 : Tool version : 1.7.1.0
15:10:52 : UpgradeDLL version : 2.1.5.3
15:10:52 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
15:10:52 : LGE USB Driver Version :
15:10:52 : Android PDLV Version :
15:10:52 : Android NDLV Version :
15:10:52 : ******************************************
15:10:52 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
15:10:52 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
15:10:52 : SetEmerModeAT()
15:10:52 : _IsConnectedPhone Call
15:11:02 : _IsConnectedPhone(1)
15:11:02 : 0 - NotConnected.
15:11:02 : 1 - Normal connect success
15:11:02 : 2 - Emergency connect success
15:11:02 : *****CheckOS Start********
15:11:02 : Microsoft_Windows7_Home Edition_Service Pack 1
15:11:02 : *****CheckPCSyncPrograms Start*****
15:11:02 : PCSyncPrograms Not Found - OK and ready to upgrade
15:11:02 : Verifying phone connection...
15:11:02 : dwWaitResetTime(40000 ms)
15:11:03 : Phone Mode(1)
15:11:03 : *****GetPhoneType Start*****
15:11:03 : Phone Type : OMAP_IFX
15:11:03 : *****GetPhoneModel Start*****
15:11:03 : *****GetPhoneBinaryVersion Start*****
15:11:04 : Phone Bin Version : V10D_00
15:11:04 : *****Get ESN / IMEI / MEID Start*****
15:11:07 : ESN/IMEI/MEID : ##############
15:11:08 : Check Backup and Restore model
15:11:08 : Skip Backup and Restore - Emergency mode
15:11:08 : Phone type Compare start
15:11:08 : *****Start _GetBatteryLevel*****
15:11:08 : ******************************
15:11:09 : Battery(4)
15:11:12 : *****CheckPCSyncPrograms Start*****
15:11:12 : PCSyncPrograms Not Found - OK and ready to upgrade
15:11:13 : ****************CheckAndDownload********************
15:11:13 : Version : V10E_00
15:11:13 : !!*****OpenURL Start*****!!
15:11:14 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
15:11:14 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
15:11:14 : ==================LJH log1 ====================
15:11:14 : !!*****OpenURL Start*****!!
15:11:15 : !!*****OpenURL Start*****!!
15:11:15 : strURL.IsEmpty()
15:11:15 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
15:11:15 : CLGMobileHttp Class ¼Ò¸ê½ÃÀÛ.
15:11:15 : CLGMobileHttp Class ¼Ò¸ê...
15:11:15 : Page_Error ºÎºÐÀÔ´Ï´Ù
15:11:15 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
15:12:50 : =======Cancel button click : m_nStep(5)
Click to expand...
Click to collapse
Hi bewpy, if you had troubles you could try this way http://forum.xda-developers.com/showthread.php?p=50729855
Cheers. Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted
BajoPrimate said:
Hi bewpy, if you had troubles you could try this way http://forum.xda-developers.com/showthread.php?p=50729855
Cheers. Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted
Click to expand...
Click to collapse
Unfortunately that didnt help , LG mobile tool still freezing when it says it starts downloading. Does the log I sent look normal? or what
Or if someone knows where I can download the most up to date stock KDZ for metropcs
I don't know it.
Did you change your hosts file? If so, you should revert the changes.
BTW, perhaps you may delete your IMEI from the log file, just in case.
Sent from my LG P76020L-EUR-XX unlocked and rooted
BajoPrimate said:
I don't know it.
Did you change your hosts file? If so, you should revert the changes.
BTW, perhaps you may delete your IMEI from the log file, just in case.
Sent from my LG P76020L-EUR-XX unlocked and rooted
Click to expand...
Click to collapse
I just formated recently.. So my hosts file is default :/ .. is there anything I need to install other then my driver for my phone and the LG mobile support tool?
bewpy said:
I just formated recently.. So my hosts file is default :/ .. is there anything I need to install other then my driver for my phone and the LG mobile support tool?
Click to expand...
Click to collapse
Hi bewpy, your battery charge should be at least 40%, you also need a good internet connexion and you could try with a back usb port.
It looks like you're doing things the right way, I don't know what's the mater; you could try in another PC, just in case.
Your IMEI is unique and it should be private,so, you could edit your post and change your IMEI from the atached log file, as this:
15:11:07 : ESN/IMEI/MEID : ##############
BajoPrimate said:
Hi bewpy, your battery charge should be at least 40%, you also need a good internet connexion and you could try with a back usb port.
It looks like you're doing things the right way, I don't know what's the mater; you could try in another PC, just in case.
Your IMEI is unique and it should be private,so, you could edit your post and change your IMEI from the atached log file, as this:
15:11:07 : ESN/IMEI/MEID : ##############
Click to expand...
Click to collapse
Well here let me ask you this.. Should there be a loading bar? Or is the screenshot I post exactly how it should look. Keep in mind.. the time elapsed does not continue, it stays frozen. Should I let this go ? The program never says not responding or anything. And I have really good internet, 60mb download speed. 10 upload. So I dont assume it should take to long, should it? And my battery is always higher then 40% when I do this.. I dont get any battery errors when it checks.
Oh, and I just installed a program called NetBalancer, it allows you to see how much bandwitdh each process is using. And it shows that the LG mobile exe only downloaded 250kb and stopped. It doesnt continue downloading, something stops it. I have no AV enabled, I am behind a router. Do I need to forward any ports? I wouldn't think so, but figured i'd ask.
bewpy said:
Oh, and I just installed a program called NetBalancer, it allows you to see how much bandwitdh each process is using. And it shows that the LG mobile exe only downloaded 250kb and stopped. It doesnt continue downloading, something stops it. I have no AV enabled, I am behind a router. Do I need to forward any ports? I wouldn't think so, but figured i'd ask.
Click to expand...
Click to collapse
Hi bewpy, I've used LG Mobile Support Tool only two times, it was seven months ago, so I don't remember exactly.
The two times I've used the upgrade recovery, entered my IMEI and following the instructions, there was a download bar, in my case it took more than an hour, first downloading and then installing, but I didn't take any log to compare with yours.
I'm sorry.
Cheers. Good luck.
BajoPrimate said:
Hi bewpy, I've used LG Mobile Support Tool only two times, it was seven months ago, so I don't remember exactly.
The two times I've used the upgrade recovery, entered my IMEI and following the instructions, there was a download bar, in my case it took more than an hour, first downloading and then installing, but I didn't take any log to compare with yours.
I'm sorry.
Cheers. Good luck.
Click to expand...
Click to collapse
Do you have any links to the KDZ for p769 JB? or just the most up to date version for metro pcs? I think is v10f or something .. i just want to go back to stock, I hate getting update notifications to update my OS, and it not working.. and every 15 mins having the popup come up telling me to update.. is there a way to turn that off?
I looked at the ROM page, and all the p769 JBs links are broken it seems.. but I ultimately just wanna get rid of the update popup for android OS
bewpy said:
Do you have any links to the KDZ for p769 JB? or just the most up to date version for metro pcs? I think is v10f or something .. i just want to go back to stock, I hate getting update notifications to update my OS, and it not working.. and every 15 mins having the popup come up telling me to update.. is there a way to turn that off?
I looked at the ROM page, and all the p769 JBs links are broken it seems.. but I ultimately just wanna get rid of the update popup for android OS
Click to expand...
Click to collapse
Hi bewpy, you could try this for stopping update notifications: http://forum.xda-developers.com/showthread.php?t=2477627
Cheers. Good luck.
Edit: here you go what I've found in Polloos' kdz-directory.tk (P769 V21D JB Wind Mobile)http://kdz-directory.tk/lgl9/p769/p769/canada/
Hmm, I just dont understand why I cant get this LG Mobile Support Tool to work. Here is a video of whats happening..
https://www.youtube.com/watch?v=spHK_ftGFYg
Any idea? It just stops there.. nothing gets downloaded
I don't know.
Did you try with the phone on and in LG software mode?
Cheers. Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted
BajoPrimate said:
I don't know.
Did you try with the phone on and in LG software mode?
Cheers. Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted
Click to expand...
Click to collapse
I couldnt figure out how to get my phone into that.. I did try but couldnt succeed with getting it into S/W mode.. I took battery out, and had it plugged in, pushed volume down and up both, while pushing power button for a few seconds.. Phone doesnt do anything.. having all sorts of trouble .. what am I doing wrong?
Okay, well I got it into S/w Mode, and now LG mobile is telling me only wireless upgrades are support on this phone lol.. So I guess my next question is.. how can I update my phone through OTA if ever time I try and run the update, I get the red triangle while its updating?
bewpy said:
Okay, well I got it into S/w Mode, and now LG mobile is telling me only wireless upgrades are support on this phone lol.. So I guess my next question is.. how can I update my phone through OTA if ever time I try and run the update, I get the red triangle while its updating?
Click to expand...
Click to collapse
1.try to fix your host file (must not add any code like 1.23.4 lgxxx)
2. with my sistuation, i cant run it with win 8 64bit, but when i switch to win 8.1 32 bit, it run well,
good luck, man
Perhaps you could try this (by Duckscreen) http://forum.xda-developers.com/showthread.php?p=51206080
Cheers. Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted
Related
Hello everybody,
Fortunatly, my device is not in "brick" state but I would feel safer if I could have an answer to my question.
I flashed my ROM with the following method (the main purpose was to root my device with the Lelus method) :
http://forum.xda-developers.com/showthread.php?t=2085344
But, the only way I could get the LG Update Tool working was to have my device with Android started and USB mode to set "LG Software". Then, the LG Update Tool restart my device to "S/W Update" screen during its flashing procedure.
However, if I directly start my device on the "S/W Update" mode (by pressing Volume Down button while I plug through USB the device to my computer), the LG Update Tool refuses to see the device.
This issue could eventually happen if Android was not bootable (because of some human mistake, of course; it's my first Android device so I am a noob ).
Is there any known procedure to restore an unbootable L9 P760 device ? (for example, force LG Update Tool to recognize the device even if it was directly on "S/W Update" state)
Thank you for your answers and your time
AW: [Q] Theorical question about L9 P760 unbricking
You must hold vol+ and insert USB for s/w Update.
Try the emergency mode with lg Update Tool.
Thank you for your answer. I am sorry, I made a mistake in my post : when I said "Volume Down", I meant "Volume Up" . When I manually reached the "S/W Update" screen, it was by doing the good action .
Unfortunatly, even with "EMERGENCY" or "CS_EMERGENCY" mode, the result is still the same : the LG Update Tool refuses to perform a flash directly from the "S/W Update" screen. The output text is the following (in both "EMERGENCY" and "CS_EMERGENCY" mode) :
Code:
22:45:12 : [C:\LGMobileUpgrade] Try to delete folder
22:45:12 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
22:45:12 : Start Date : 2013-04-02 22:45:12
22:45:12 : ---------- QM Testmode ---------
22:45:12 : ***** Check Tool Version *****
22:45:12 : Tool version : 1.5.4.8
22:45:12 : UpgradeDLL version : 1.2.6.7
22:45:12 : Current Dir : C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\B2C_Client
22:45:12 : LGE USB Driver Version : 4.9.8.1
22:45:12 : Android PDLV Version :
22:45:12 : Android NDLV Version : 3.8.0.0
22:45:12 : ******************************************
22:45:12 : [C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone] Try to delete folder
22:45:13 : SetEmerModeAT()
22:45:13 : _IsConnectedPhone Call
22:45:24 : _IsConnectedPhone(0)
22:45:24 : 0 - NotConnected.
22:45:24 : 1 - Normal connect success
22:45:24 : 2 - Emergency connect success
22:45:24 : *****CheckOS Start********
22:45:24 : Microsoft_Windows_XP_Professional_Service Pack 2
22:45:24 : *****CheckPCSyncPrograms Start*****
22:45:25 : PCSyncPrograms Not Found - OK and ready to upgrade
22:45:25 : Checking the connection with the cell phone...
22:45:25 : dwWaitResetTime(40000 ms)
22:45:26 : _IsConnectedPhone Call
22:45:35 : _IsConnectedPhone(0)
22:45:35 : 0 - NotConnected.
22:45:35 : 1 - Normal connect success
22:45:35 : 2 - Emergency connect success
22:45:36 : _IsConnectedPhone Call
22:45:45 : _IsConnectedPhone(0)
22:45:45 : 0 - NotConnected.
22:45:45 : 1 - Normal connect success
22:45:45 : 2 - Emergency connect success
22:45:46 : _IsConnectedPhone Call
22:45:55 : _IsConnectedPhone(0)
22:45:55 : 0 - NotConnected.
22:45:55 : 1 - Normal connect success
22:45:55 : 2 - Emergency connect success
22:45:55 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button.
22:46:05 : Check Cancel button active..
I tried to unplug and plug again the phone after 10 seconds (as it is advised in the unbrick totorial to force driver installation) : the result is still the same when I click on "Restart" from the update tool. In addition, I don't understand how it could be a driver issue : there is no unrecognized device on my Windows drivers manager and I am able to perform a flash as long as I start from a booted Android with the right options (the LG Update Tools restarts itself the phone in "S/W Update" and it works : the strange part is that during a more advanced update process step, while the phone is in "S/W Update" mode, my Windows pops up a found new device panel, but even if Windows doesn't find any valid driver, the update process continues and the result is right).
Do you have any other idea about this direct flash through "S/W Update" mode issue ?
Thank you in advance for your answers
S/W update mode in JB is broken.
To solve it you need to fastboot your phone and flash xloader and uboot from ICS.
Thank you for your answer.
Yes, I forgot to mention it : my phone is running under the official V20B ROM (just a little bit modified with your trick :highfive: ) : I though the "S/W Update" mode was at a lower level (and the Android installation didn't affect it).
I saw a post on this fastboot tool but it's a little bit too "hard" to understand for a beginner like me :
http://forum.xda-developers.com/showthread.php?t=2119090
So I think I will check about this solution only if I have to (currrently, this is not the case so I am feeling lazy... :angel: )
The last thing I would like to know is if the solution you said requires some previous manipulations which can only be done from my device while it is bootable (such as memory dumps : I am thinking about PS3 hack scene where you must perform your own NAND dump because it is crypted and unique for your PS3 so nobody else can give it to you if you previously corrupt your NAND and you forget to dump it before) ?
OperationNT said:
Thank you for your answer.
Yes, I forgot to mention it : my phone is running under the official V20B ROM (just a little bit modified with your trick :highfive: ) : I though the "S/W Update" mode was at a lower level (and the Android installation didn't affect it).
I saw a post on this fastboot tool but it's a little bit too "hard" to understand for a beginner like me :
http://forum.xda-developers.com/showthread.php?t=2119090
So I think I will check about this solution only if I have to (currrently, this is not the case so I am feeling lazy... :angel: )
The last thing I would like to know is if the solution you said requires some previous manipulations which can only be done from my device while it is bootable (such as memory dumps : I am thinking about PS3 hack scene where you must perform your own NAND dump because it is crypted and unique for your PS3 so nobody else can give it to you if you previously corrupt your NAND and you forget to dump it before) ?
Click to expand...
Click to collapse
Nope, there isn't anything unique about x and u.
Hello Buddy,
I have just one question for you, Have you unlocked bootloader of your L9????
Because the problem you are facing is only result of unlocking bootloader and i also faced the same. If you unlocked the bootloader, then there is no any trick to relock it (Untill Now ....), but still you can flash roms and unbrick soft bricked devices............:good:
AW: [Q] Theorical question about L9 P760 unbricking
Have you tried the original lg update tool? And there the emergency mode.
I had the same problem after downgrade to v10h.
I solved it with the lg update tool, not With the kdz updater.
Hello,
@Lelus : thank you for your answer, I feel safer
@gdjindal : No, I didn't unlocked my bootloader, I just put the last LG update for P760 (JellyBean V20B, French region).
@ramrod : I just used the tool and the method provided in this post :
http://forum.xda-developers.com/showthread.php?t=2085344
I thought KDZ Update loads "LG Update Tools" throught the created "Small HTTP Server" when I click on the "Web update" button. Is there any other tool ?
Thank you for your help
This is the original lg tool. LGMobile Support Tool
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yes kdz loads the update tool, but it can´t detect the phone.
Try the original program, but undo changes in the host file.
i bricked mine to the point of it saying security error. what you do is press power and repeatably press vol up it will get out of the brick loop and go into sw update from there you can use the unbrick guide/flash.
you can also try a hard reset.
power off the phone,
hold volume down and home button
then press / hold the power button.
this helped my wifes phone out of a bootloop.
ramrod said:
Have you tried the original lg update tool? And there the emergency mode.
Click to expand...
Click to collapse
I just tried it and you are right, ramrod : the original LG Update Tool recognize the phone even when it is on "S/W Update" screen from the begining, it can also perfrom fine an update !
So, the "S/W Update" mode is not broken since JB Update, it is just the way to communicate with it which has changed; and current known offline flash method is incompatible with those changes .
To have an offline method which is compatible with the new "S/W Update" mode behavior, it would requires some reverse-engineering on how the "LGUserCSTool.exe" (which is, I think, the final executable which performs the update) is executed (arguments given at its execution, environement variables previously set by its parent process, inter-process communications).
AW: [Q] Theorical question about L9 P760 unbricking
Perhaps,its possible to copy the cp and ap files manually, after download with LG update tool, timely to the extracting process.
One rooting method used this.
I tested on LG G2 Korea Version F320S, F320L, F320K
- Why bootloop?: Some people Update OTA after flash CWM or TWRP so it will be bootloop. Or some strange reasons
- What should we do when we can not flash Stock firmware by FlashTool.1.0.54?
Let do follow this guide:
- Download file:
Flashtool V1.5 --> http://www.fshare.vn/file/TNVQZ9N74T ( tks to GSM Hosting forum )
Crack Flashtool : http://www.fshare.vn/file/TS1SGGVYWT ( tks to GSM hosting Forum )
File .TOT firmware :
F320S ->>> http://www.fshare.vn/file/T3SZR52W6T
F320K ->>> http://www.fshare.vn/file/TZRVMVMPFT
F320L V11c -->>> http://www.fshare.vn/file/TVR9DPAC7T
.dll file F320S/L/K >----- http://www.fshare.vn/file/TKW8J7QPQT
Driver: http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425
- Let do:
Step1: Install Flashtool V1.5. Default install folder C:\LG\LGFlashtool
Copy crack file Megalock.dll to C:\LG\LgFlashtool
Step2: Enter download mode: Turnoff, push vol+ and plug USB cable in
Open Device Manager on your computer and choose COM41 for phone connection:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step3: Open Flashtool, choose .dll and .tot file, then fresh yellow icon like this:
Step4: When Flashtool show Realdy, push USB out for 5secs and plug in again. Flash tool will automatic run
Step5: Wait for finishing:
Read more: http://choimobile.vn/threads/huong-dan-cuu-soft-brick-lg-g2-f320s-l-k.12932/#ixzz2h8Fy9fJB
Suggest you read the rules for XDA no warez allowed, CRACKED SOFTWARE = WAREZ!
fma965 said:
Suggest you read the rules for XDA no warez allowed, CRACKED SOFTWARE = WAREZ!
Click to expand...
Click to collapse
This is extremely useful, please blackout offending list and leave the post alone.
JoeTF said:
This is extremely useful, please blackout offending list and leave the post alone.
Click to expand...
Click to collapse
As a RC i can't do that.
Even though it is cracked, we don't see it as "warez". Almost every device has it cracked, so noone would be able to use it if we wouldn't allow it.
I mean, we also "crack" the bootloader of devices, which would be considered as warez, too, in that case
Cheers
laufersteppenwolf said:
Even though it is cracked, we don't see it as "warez". Almost every device has it cracked, so noone would be able to use it if we wouldn't allow it.
I mean, we also "crack" the bootloader of devices, which would be considered as warez, too, in that case
Cheers
Click to expand...
Click to collapse
hmm i guess, the way it was worded seems like you were cracking software tbh. my bad
fma965 said:
hmm i guess, the way it was worded seems like you were cracking software tbh. my bad
Click to expand...
Click to collapse
oops, may be a bit unluckily worded... the first "we" was meant as the mod staff, and the 2nd "we" as xda in general
laufersteppenwolf said:
oops, may be a bit unluckily worded... the first "we" was meant as the mod staff, and the 2nd "we" as xda in general
Click to expand...
Click to collapse
sorry, yeah i meant the OP not your reply
fma965 said:
sorry, yeah i meant the OP not your reply
Click to expand...
Click to collapse
Good post. Please leave this post coz I am also the lucky guy can get repair my bricked G2 using this usefuly TOT recovery method.
If possible, remind to set back correct version number (F320 L / K / S) in build info. which match with your IMEI#.
dokyson said:
I tested on LG G2 Korea Version F320S, F320L, F320K
- Why bootloop?: Some people Update OTA after flash CWM or TWRP so it will be bootloop. Or some strange reasons
- What should we do when we can not flash Stock firmware by FlashTool.1.0.54?
Let do follow this guide:
- Download file:
Flashtool V1.5 --> http://www.fshare.vn/file/TNVQZ9N74T ( tks to GSM Hosting forum )
Crack Flashtool : http://www.fshare.vn/file/TS1SGGVYWT ( tks to GSM hosting Forum )
File .TOT firmware :
F320S ->>> http://www.fshare.vn/file/T3SZR52W6T
F320K ->>> http://www.fshare.vn/file/TZRVMVMPFT
F320L V11c -->>> http://www.fshare.vn/file/TVR9DPAC7T
.dll file F320S/L/K >----- http://www.fshare.vn/file/TKW8J7QPQT
Driver: http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425
- Let do:
Step1: Install Flashtool V1.5. Default install folder C:\LG\LGFlashtool
Copy crack file Megalock.dll to C:\LG\LgFlashtool
Step2: Enter download mode: Turnoff, push vol+ and plug USB cable in
Open Device Manager on your computer and choose COM41 for phone connection:
Read more: http://choimobile.vn/threads/huong-dan-cuu-soft-brick-lg-g2-f320s-l-k.12932/#ixzz2h8Fy9fJB
Click to expand...
Click to collapse
can't eneter in download mode i am stuck!!! help!!!
can someone give me the files for my D80210a
Stuck
Every time I try to press vol.up and plug in I still load right into twrp
ocarlty said:
Every time I try to press vol.up and plug in I still load right into twrp
Click to expand...
Click to collapse
I have the same problem with the CWM.
when i press the yellow arrow it gives me this error
i press ok and it continues to the step i have to reconnect the phone.
i reconnect it and i get this
i have changed the com number
i don't know what is the problem...
taxexpert said:
I have the same problem with the CWM.
Click to expand...
Click to collapse
Me too. Ever get this figured out?
I think what this boils down to is USB debugging was disabled by the factory reset. I had reset my device to prepare to sell it. When it booted back up I got an OTA offer and, not thinking, I accepted it. However, I still had CWR and root. I think OTA'S require stock recovery to work properly. So, no USB debugging and CWR as the recovery = soft brick. And, since CWR does not have a terminal option, there's no way to enter commands. I'm thinking this is going to be a warranty claim for me.
Will it work to restore a D805?
dokyson said:
I tested on LG G2 Korea Version F320S, F320L, F320K
- Why bootloop?: Some people Update OTA after flash CWM or TWRP so it will be bootloop. Or some strange reasons
- What should we do when we can not flash Stock firmware by FlashTool.1.0.54?
...
Click to expand...
Click to collapse
Hi!
Thank you for this n.n
Will it work to restore a D805? If not, then I better be careful with OTAs, or I better don't use any recovery as I'm not going to
flash any custom ROM till the G2 is done with official updates (2015?).
Thanks again n.n
- L.
I get this problem any help would be appreciated. thanks.
Could someone give another link on file for F320S > LGF320SAT-00-V10e-SKT-KR-JUL-29-20130
Becuse I have tried to download it by link in the topic. It takes me more than 8 hour, but file was corrupted (2.3 GB not 2.5 GB).
Please - I need TOT for F320
Sorry, if I interrupt here. I'm very new to forum.
My LG G2 F320S having Boot Loop after i updated on 4th Jan 2014.
I try to get TOT file for - 320S ->>> Given location But it seems not working. (I meant not downloading. I tried several days).
If anybody having it please please share with me.
Thanks Lot.
LK
Weird issue
Hi All,
tried using flashtool but I get the error that I need to check my phone model or the DLL.
I bought this phone from the Philippines with model number LG D802. I had flashed other roms for this with D802.
But when I was trying a while ago since I got a bootloop issue, the phone's downlaod mode is in korean and says in the phone and flashtool that my phone is running F320K? but it's so weird since I had D802 before even in the IMEI sticker in the back and to think I installed rayglobe ROM, before having the boot loop.
Any help would be appreciated.
THanks!
Hello everyone,
I flashed 24B Lollipop to use TWRP .. Then I rooted it with one clck root and everything was going good.. So I downloaded the Autorec for Lollipop and after using it the phone rebooted and then it got to a black screen
And now I have nothing on my screen .. no normal boot, download mode or recovery mode
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is what I get when i connect the phone to the laptop
can anyone tell me how to fix it ?? because i really love my phone and i'm in panic now
First, it sounds like you used the version of autorec in the Play Store which specifically says it's for 23C only.
The version for 24B you can find in @bender_007 's autorec thread in the General section of the non-Verizon G3 forums. The one there they doesn't say what it's for its for 23C also, then below it is the 24B version.
Download mode works even though you don't see anything on the screen, just take the battery out, put it back in and go through the motions of putting it in Download mode.
It's easiest to root and put TWRP on from 10B anyway.
This'll also fix your trouble.
http://forum.xda-developers.com/showthread.php?p=67945841
http://forum.xda-developers.com/showthread.php?p=68040923
http://forum.xda-developers.com/showpost.php?p=68098895&postcount=1470
First, it sounds like you used the version of autorec in the Play Store which specifically says it's for 23C only.
The version for 24B you can find in @bender_007 's autorec thread in the General section of the non-Verizon G3 forums. The one there they doesn't say what it's for its for 23C also, then below it is the 24B version.
Download mode works even though you don't see anything on the screen, just take the battery out, put it back in and go through the motions of putting it in Download mode.
It's easiest to root and put TWRP on from 10B anyway.
This'll also fix your trouble.
http://forum.xda-developers.com/show...php?p=67945841
http://forum.xda-developers.com/show...php?p=68040923
http://forum.xda-developers.com/show...postcount=1470
Click to expand...
Click to collapse
hello
thanks for your response ♥
i'm trying to flash the 10b tot
i'm getting the same error every time
can u help me to solve this ?
Are you 100% positive you're in download mode? Which says: Firmware upgrade/update ?
This tells us you don't have the vs985 model at all or it can't even get your model info. I've tried to manually inject a model number into "to (985)" and succeded but it still didn't want to flash so I forced the device into 9008 mode.
See if it really shows you the download mode (no blue dots..)
roirraW "edor" ehT said:
First, it sounds like you used the version of autorec in the Play Store which specifically says it's for 23C only.
The version for 24B you can find in @bender_007 's autorec thread in the General section of the non-Verizon G3 forums. The one there they doesn't say what it's for its for 23C also, then below it is the 24B version.
Download mode works even though you don't see anything on the screen, just take the battery out, put it back in and go through the motions of putting it in Download mode.
It's easiest to root and put TWRP on from 10B anyway.
This'll also fix your trouble.
http://forum.xda-developers.com/showthread.php?p=67945841
http://forum.xda-developers.com/showthread.php?p=68040923
http://forum.xda-developers.com/showpost.php?p=68098895&postcount=1470
Click to expand...
Click to collapse
bender_007 said:
Are you 100% positive you're in download mode? Which says: Firmware upgrade/update ?
This tells us you don't have the vs985 model at all or it can't even get your model info. I've tried to manually inject a model number into "to (985)" and succeded but it still didn't want to flash so I forced the device into 9008 mode.
See if it really shows you the download mode (no blue dots..)
Click to expand...
Click to collapse
The screen is all black .. i can't see anything
i don't know if it's Download mode or anything else ..
is there an easier way to force the device to go to 9008 mode ?
i already have BoardDiag installed and the tot extracted ..
so it'll be a lot easier for me to fix it if it's in 9008 mode
Ah wait, see the v35b downgrade tutorial, you're not bricked, you just didn't see the warnings on playstore. Search for "downgrade vs985 35b" and you're safe.
Sent from my SM-G930F using Tapatalk
@ghadeer.m96
@bender_007
Don't force it into QHSUSB_BULK 9008 mode, you shouldn't have to. If you have trouble flashing the TOT the right way you might have trouble recovering from QHSUSB_BULK 9008 mode. You can effectively enough tell it's in Download mode by going through the motions I described and noting that it does show up in Device Manager in the Port section, just as you posted screenshots for. It's true that it can show that in different circumstances, but there's been dozens of others who've done the exact same thing as you and were able to recover.
You followed the three links I gave you and read all the information regarding downgrading using the 10B TOT? You're using the newer .DLL that's extracted from the 35B KDZ?
You can also try flashing the 10B KDZ instead. It might be easier for you, see @annoyingduck 's stickied return to stock thread in the General section for that. TOT is preferred, though.
There's no easier way to force it into QHSUSB_BULK 9008 mode. I tried a few times and failed because the pins are so tiny that I might've been shorting the wrong ones, or what I was using wasn't conductive enough. In the end, it turned out I just needed to use a different PC and/or different LG OEM cable - not sure which one did the trick since I changed both things at the same time.
See the following for Warning/encouragement when trouble flashing TOT/KDZ, and also regarding not needing to force into QHSUSB_BULK 9008 mode, but my previous three links for more specific regarding downgrading:
http://forum.xda-developers.com/showpost.php?p=68054128&postcount=5
Edit: Whoops, goofed up my post edit earlier. Edit 2: Okay, for some reason (too long a post?) TapaTalk isn't showing the link at all. Got rid of quotes to try to shorten.
roirraW "edor" ehT said:
Don't force it into QHSUSB_BULK 9008 mode, you shouldn't have to. If you have trouble flashing the TOT the right way you might have trouble recovering from QHSUSB_BULK 9008 mode. You can effectively enough tell it's in Download mode by going through the motions I described and noting that it does show up in Device Manager in the Port section, just as you posted screenshots for. It's true that it can show that in different circumstances, but there's been dozens of others who've done the exact same thing as you and were able to recover.
You followed the three links I gave you and read all the information regarding downgrading using the 10B TOT? You're using the newer .DLL that's extracted from the 35B KDZ?
You can also try flashing the 10B KDZ instead. It might be easier for you, see @annoyingduck 's stickied return to stock thread in the General section for that. TOT is preferred, though.
There's no easier way to force it into QHSUSB_BULK 9008 mode. I tried a few times and failed because the pins are so tiny that I might've been shorting the wrong ones, or what I was using wasn't conductive enough. In the end, it turned out I just needed to use a different PC and/or different LG OEM cable - not sure which one did the trick since I changed both things at the same time.
See the following for Warning/encouragement when trouble flashing TOT/KDZ, and also regarding not needing to force into QHSUSB_BULK 9008 mode, but my previous three links for more specific regarding downgrading:
Click to expand...
Click to collapse
i keep trying to flash TOT and keeps showing me the same error although i tried 2 different DLL files .. i tried to flash a KDZ and the flashtool is always stuck at 4%
i'm in a mess
i've tried many drivers .. changed usb port .. changed usb cable
i'm desperate
i don't know what else to try
ghadeer.m96 said:
i keep trying to flash TOT and keeps showing me the same error although i tried 2 different DLL files .. i tried to flash a KDZ and the flashtool is always stuck at 4%
i'm in a mess
i've tried many drivers .. changed usb port .. changed usb cable
i'm desperate
i don't know what else to try
Click to expand...
Click to collapse
Did you follow all the steps including replacing the megalock.dll file?
I had the black screen also and fixed it by flashing the 10B TOT by following this thread exactly, second post down, the TOT method.
http://forum.xda-developers.com/showthread.php?t=2785089
ghadeer.m96 said:
i keep trying to flash TOT and keeps showing me the same error although i tried 2 different DLL files .. i tried to flash a KDZ and the flashtool is always stuck at 4%
i'm in a mess
i've tried many drivers .. changed usb port .. changed usb cable
i'm desperate
i don't know what else to try
Click to expand...
Click to collapse
If what @cory733 said doesn't help, a different PC might be your only option.
You didn't answer specifically, did you definitely try the more recent LG .DLL (different than the megalock) That's extracted from the 35B KDZ?
roirraW "edor" ehT said:
@ghadeer.m96
@bender_007
Don't force it into QHSUSB_BULK 9008 mode, you shouldn't have to. If you have trouble flashing the TOT the right way you might have trouble recovering from QHSUSB_BULK 9008 mode. You can effectively enough tell it's in Download mode by going through the motions I described and noting that it does show up in Device Manager in the Port section, just as you posted screenshots for. It's true that it can show that in different circumstances, but there's been dozens of others who've done the exact same thing as you and were able to recover.
You followed the three links I gave you and read all the information regarding downgrading using the 10B TOT? You're using the newer .DLL that's extracted from the 35B KDZ?
You can also try flashing the 10B KDZ instead. It might be easier for you, see @annoyingduck 's stickied return to stock thread in the General section for that. TOT is preferred, though.
There's no easier way to force it into QHSUSB_BULK 9008 mode. I tried a few times and failed because the pins are so tiny that I might've been shorting the wrong ones, or what I was using wasn't conductive enough. In the end, it turned out I just needed to use a different PC and/or different LG OEM cable - not sure which one did the trick since I changed both things at the same time.
See the following for Warning/encouragement when trouble flashing TOT/KDZ, and also regarding not needing to force into QHSUSB_BULK 9008 mode, but my previous three links for more specific regarding downgrading:
http://forum.xda-developers.com/showpost.php?p=68054128&postcount=5
Edit: Whoops, goofed up my post edit earlier. Edit 2: Okay, for some reason (too long a post?) TapaTalk isn't showing the link at all. Got rid of quotes to try to shorten.
Click to expand...
Click to collapse
i've been going through the motions of putting it into download mode .. and i think i succeeded even though the screen is all black
but it still won't flash
can u link me to the DLL file you're using with your G3 ???
i'm using a DLL file called LGUP8974.dll
and it still gives me the same error
crossdll (unknown) to (vs985)
ghadeer.m96 said:
i've been going through the motions of putting it into download mode .. and i think i succeeded even though the screen is all black
but it still won't flash
can u link me to the DLL file you're using with your G3 ???
i'm using a DLL file called LGUP8974.dll
and it still gives me the same error
crossdll (unknown) to (vs985)
Click to expand...
Click to collapse
Like I said in at least one of the three posts I linked to originally, the .DLL that's from the 35B KDZ is at my Android File Host link that's at the bottom of the first post of @annoyingduck 's stickied return to stock thread in the General section. I also link to his thread in my signature below.
The filename of the .DLL is meaningless - it's named the same or similar no matter how old or new the version is.
roirraW "edor" ehT said:
Like I said in at least one of the three posts I linked to originally, the .DLL that's from the 35B KDZ is at my Android File Host link that's at the bottom of the first post of @annoyingduck 's stickied return to stock thread in the General section. I also link to his thread in my signature below.
The filename of the .DLL is meaningless - it's named the same or similar no matter how old or new the version is.
Click to expand...
Click to collapse
i tried your .DLL and i still get the same error
any ideas ?
ghadeer.m96 said:
i tried your .DLL and i still get the same error
any ideas ?
Click to expand...
Click to collapse
Did you try the ideas I mentioned earlier about flashing the KDZ or using a different PC yet?
roirraW "edor" ehT said:
Did you try the ideas I mentioned earlier about flashing the KDZ or using a different PC yet?
Click to expand...
Click to collapse
do i have to use the 10b KDZ ? or can i flash any other version ?
PS: i'm about to try another PC
ghadeer.m96 said:
do i have to use the 10b KDZ ? or can i flash any other version ?
PS: i'm about to try another PC
Click to expand...
Click to collapse
You can flash whatever KDZ you want, just remember that if you flash the 35B or higher KDZ, you can't flash older than a 35B KDZ without first flashing the 10B TOT.
It's easiest to root and put TWRP on 10B. If you want those things, I suggest flashing the 10B KDZ if you can't get the TOT to work on another PC. Then got can flash a 24B based ROM if that's what you want, or one based on another version.
roirraW "edor" ehT said:
You can flash whatever KDZ you want, just remember that if you flash the 35B or higher KDZ, you can't flash older than a 35B KDZ without first flashing the 10B TOT.
It's easiest to root and put TWRP on 10B. If you want those things, I suggest flashing the 10B KDZ if you can't get the TOT to work on another PC. Then got can flash a 24B based ROM if that's what you want, or one based on another version.
Click to expand...
Click to collapse
i tried the TOT method on a different pc and it still gives the same error
i'll try the KDZ method in a sec
roirraW "edor" ehT said:
You can flash whatever KDZ you want, just remember that if you flash the 35B or higher KDZ, you can't flash older than a 35B KDZ without first flashing the 10B TOT.
It's easiest to root and put TWRP on 10B. If you want those things, I suggest flashing the 10B KDZ if you can't get the TOT to work on another PC. Then got can flash a 24B based ROM if that's what you want, or one based on another version.
Click to expand...
Click to collapse
i've tried the KDZ method as well
and still failing
i'm running out of options
ghadeer.m96 said:
i've tried the KDZ method as well
and still failing
i'm running out of options
Click to expand...
Click to collapse
I'm assuming at this point that you read in full every link I gave you including information regarding using the original LG cable, and what kind of USB ports to use, etc. I don't know what to tell you.
Could you be more specific about what LG Flash Tool 2014 says when you try to flash the KDZ? You read the second post of @annoyingduck 's stickied return to stock thread in the General section regarding things that look like errors in LG Flash Tool 2014 but aren't?
roirraW "edor" ehT said:
You can flash whatever KDZ you want, just remember that if you flash the 35B or higher KDZ, you can't flash older than a 35B KDZ without first flashing the 10B TOT.
It's easiest to root and put TWRP on 10B. If you want those things, I suggest flashing the 10B KDZ if you can't get the TOT to work on another PC. Then got can flash a 24B based ROM if that's what you want, or one based on another version.
Click to expand...
Click to collapse
if it helps at all
here's a log of my KDZ flash attempt
..
01:56:28 : Start Date : 2016-09-05 01:56:28
01:56:28 : ---------- CSE mode ---------
01:56:28 : ***** Check Tool Version *****
01:56:28 : Tool version :
01:56:28 : UpgradeDLL version :
01:56:28 : Current Dir : C:\Users\Visitor\Desktop\LG Flash Tool 2014
01:56:28 : LGE USB Driver Version :
01:56:28 : Android PDLV Version :
01:56:28 : Android NDLV Version :
01:56:28 : ******************************************
01:56:28 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
01:56:28 : RemoveDirectory1 Error(145):C:\ProgramData\LGMOBILEAX\Phone
01:56:28 : *****CheckOS Start********
01:56:28 : Microsoft_Windows8_Professional_
01:56:28 : *****CheckPCSyncPrograms Start*****
01:56:28 : PCSyncPrograms Not Found - OK and ready to upgrade
01:56:28 : SetEmerModeAT()
01:56:29 : Verifying phone connection...
01:56:29 : dwWaitResetTime(40000 ms)
01:56:30 : _IsConnectedPhone Call
01:56:45 : _IsConnectedPhone(1)
01:56:45 : 0 - NotConnected.
01:56:45 : 1 - Normal connect success
01:56:45 : 2 - Emergency connect success
01:56:45 : Phone Mode(1)
01:56:45 : *****GetPhoneType Start*****
01:56:45 : Phone Type : CDMA
01:56:45 : *****Get ESN / IMEI / MEID Start*****
01:56:47 : Skip Backup and Restore - CSE mode.
01:56:47 : Skip Sequential upgrade info check - CSE mode.
01:56:47 : *****CheckPCSyncPrograms Start*****
01:56:47 : PCSyncPrograms Not Found - OK and ready to upgrade
01:56:48 : ****************CheckAndDownload********************
01:56:48 : Version : VS98547A_01
01:56:48 : !!*****OpenURL Start*****!!
01:56:48 : ******Extract Start C:\Users\Visitor\Desktop\LG Flash Tool 2014\VS98547A_01.kdz*****
01:56:48 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
01:56:48 : Check 2G-4G big size kdz file..
01:56:48 : Extract 2G-4G big size kdz file..
01:56:48 : NNNNN WDB FullPath(C:\Users\Visitor\Desktop\LG Flash Tool 2014\VS98547A_01.kdz)
01:56:48 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
01:56:48 : Extract End C:\Users\Visitor\Desktop\LG Flash Tool 2014\VS98547A_01.kdz
01:56:48 : 01 Skip delete kdz 1.1 file...
01:56:49 : ------------------Model.dll Information-------------------
01:56:49 : Filename : LGUP_8974.dll
01:56:49 : Version : 0.3.19.15
01:56:49 : File size : 1587200
01:56:49 : File date : 2016/09/05-01:56:48
01:56:49 : PC Created date: 2016/09/05-01:56:48
01:56:49 : ----------------------------------------------------------
01:56:49 : *****Check LGCM Programs Start*****
01:56:49 : LGCM Programs Not Found - OK and ready to upgrade
01:56:49 : m_pLGCyonUpdate status change.
01:56:50 : *****WorkModelDLL Start*****
01:56:51 : strPhoneBinaryPath(C:\Users\Visitor\Desktop\LG Flash Tool 2014\VS98547A_01.kdz)
01:56:51 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
01:56:51 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
01:56:53 : _DetachDLL Call
01:56:58 : _DetachDLL Call End
01:56:58 : Call fn_StartUpgrade
01:56:58 : Phone mode change -> CSE
01:56:58 : ********* CDMA Model.dll input Parameter *************
01:56:58 : MODEL_EVENT : 32769
01:56:58 : PhoneBinaryPath : C:\Users\Visitor\Desktop\LG Flash Tool 2014\VS98547A_01.kdz
01:56:58 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
01:56:58 : BootWaitTime : 49500
01:56:58 : UsbHighSpeed : FALSE
01:56:58 : PhoneMode : 4
01:56:58 : NewPhoneBinVersion : VS98547A_01
01:56:58 : ClearSI : FALSE
01:56:58 : AuthMark : 0
01:56:58 : ********* CDMA Model.dll input Parameter End*************
01:57:15 : wParam : 20, lParam = 540
01:57:15 : MODEL DLL Event : (20, 540)
01:57:17 : Model File Count = 540
01:57:17 : wParam : 100, lParam = 51
01:57:17 : MODEL DLL Event : (100, 51)
01:57:17 : Step : TYPE_WPARAM_UPGRADE_ERROR
01:57:17 : CleanModelDll() : Free Model.dll
01:57:17 : _DetachDLL Call
01:57:22 : _DetachDLL Call End
01:57:25 : Page_Error ؛خ؛ذہش´د´ظ
01:57:25 : ؟©±â´آ Retry ؛خ؛ذہش´د´ظ
01:57:29 : Page_Error ؛خ؛ذہش´د´ظ
01:57:29 : ؟©±â´آ Retry ؛خ؛ذہش´د´ظ
..
i hope u can tell where the problem is
Phone information:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hardware : MT6580
Model : SM-N9500
Build number : MMB29K.G950FXXU1APFO
Build date UTC : 20170831-103530
Android v : 7.0
Baseband v: MOLY.WR8.W1449.MD.WG.MP.V23.P8, 2016/07/25 16:07
Kernel v : 3.10.0-2828982 ([email protected]) (gcc version 4.8 (GCC) ) #1 SMP Thu Aug 31 18:37:56 CST 2017
Uboot build v : -----
LCD Driver IC : 1-mtk6580_jd9369_v3_dsi_vdo_hsd599_hd1080
Down load
User MtkDroidTools_v253 to get your phone info ------> Download
Use SP Flash Tool v5.1516 -------> Download to Flash new recovery.img
Dowdload TWRP_v3.1.1-0_For_MT6580 for Note 8 mt6580 ----> Download
HOW TO INSTALL:
1. Download recovery
2. Turn off the phone
3. Use Flash Tool v5.1516 and MT6580_Android_scatter.txt chose Download only
4. put capble in to the phone
5. Finish
6. Reboot into recover
Now you can backup and install custom new Rom
7. If you want root use Kingroot
Any one have backup or stock this rom pl post to this toppic.
need you help to flash rom Note8 clone
i am looking for help my to flash rom note8 clone i try to do with your post is not working for me pls i need help
Hi i need help!!!!
i brought a clone (KK concept) has excellent full screen display quality and its a perfect clone. but I tried to flash TWRP and got it bricked, status> Dosent turn on, if I plug in battery dosent show any red light, but if I connect it to computer= I hear connecting...4 seconds...and disconnecting SOUNDS ONLY...can I get a stock rom of this model...in cpu z it shows processor as Quad and mt6595.
*Before flashing TWRP*
when I dial *#*#789789#*#* a menu pops up with a list of options one is showing >>' processor hide/show '
if I select hide, in CPUz it shows processor as snapdragon 8xx
if I select show, in CPUz it shows processor as mt6595
can I get the stock rom? if anyone can find out..... its been dead for days... literally I paid 5k for it but its as real as the real deal..
if any one knows pls tell me where can I get rom...no negative coments please..
tammyone said:
i am looking for help my to flash rom note8 clone i try to do with your post is not working for me pls i need help
Click to expand...
Click to collapse
can u post backup of your rom please. it would help a ton for me
hi
get it from here
https://izforum.com/firmware/note-n8-sm-n9500-mt6580-s305_n8_hdp_en/
if any one buys this rom
kindly share with us
Good day, IV eu fortunately been a victim of some meone selling a clone as a genuine Note 8. After paying R6k for the fake, I tried to factory reset the phone and it's where everything went wrong. I eventually had to install a rom. Nothing is working and the screen is blank. Can anybody please help me.
Drivers are installed and pick up the phone in SP tools. It continually gives a Dram error. Please help
Opps
Komersaris said:
Good day, IV eu fortunately been a victim of some meone selling a clone as a genuine Note 8. After paying R6k for the fake, I tried to factory reset the phone and it's where everything went wrong. I eventually had to install a rom. Nothing is working and the screen is blank. Can anybody please help me.
Drivers are installed and pick up the phone in SP tools. It continually gives a Dram error. Please help
Click to expand...
Click to collapse
Have you had any luck with this problem yet?
datt37 said:
Phone information:
Hardware : MT6580
Model : SM-N9500
Build number : MMB29K.G950FXXU1APFO
Build date UTC : 20170831-103530
Android v : 7.0
Baseband v: MOLY.WR8.W1449.MD.WG.MP.V23.P8, 2016/07/25 16:07
Kernel v : 3.10.0-2828982 ([email protected]) (gcc version 4.8 (GCC) ) #1 SMP Thu Aug 31 18:37:56 CST 2017
Uboot build v : -----
LCD Driver IC : 1-mtk6580_jd9369_v3_dsi_vdo_hsd599_hd1080
Down load
User MtkDroidTools_v253 to get your phone info ------> Download
Use SP Flash Tool v5.1516 -------> Download to Flash new recovery.img
Dowdload TWRP_v3.1.1-0_For_MT6580 for Note 8 mt6580 ----> Download
HOW TO INSTALL:
1. Download recovery
2. Turn off the phone
3. Use Flash Tool v5.1516 and MT6580_Android_scatter.txt chose Download only
4. put capble in to the phone
5. Finish
6. Reboot into recover
Now you can backup and install custom new Rom
7. If you want root use Kingroot
Any one have backup or stock this rom pl post to this toppic.
Click to expand...
Click to collapse
Sir can you port a recovery for my mtk6580 Nougat 7.1 version ice phone i555 device? my recovery partition is showing 10mb in Diskinfo but my stock recovery in only 7.15mb. I'm a noob on this. I tried porting and flash many different custom recovery but non of them worked I'm attaching my boot.img, recovery.img, and the scatter file for you to have a look. I'll be really grateful if you do it for me. I was trying to unlock my bootloader with all the method i found on the internet but every time i do so my phone unlocks but when it restarts i go to developer option by tapping 7 times my oem unlocking shows unticked. Can you please help me with that?
datt37 said:
Phone information:
Hardware : MT6580
Model : SM-N9500
Build number : MMB29K.G950FXXU1APFO
Build date UTC : 20170831-103530
Android v : 7.0
Baseband v: MOLY.WR8.W1449.MD.WG.MP.V23.P8, 2016/07/25 16:07
Kernel v : 3.10.0-2828982 ([email protected]) (gcc version 4.8 (GCC) ) #1 SMP Thu Aug 31 18:37:56 CST 2017
Uboot build v : -----
LCD Driver IC : 1-mtk6580_jd9369_v3_dsi_vdo_hsd599_hd1080
Down load
User MtkDroidTools_v253 to get your phone info ------> Download
Use SP Flash Tool v5.1516 -------> Download to Flash new recovery.img
Dowdload TWRP_v3.1.1-0_For_MT6580 for Note 8 mt6580 ----> Download
HOW TO INSTALL:
1. Download recovery
2. Turn off the phone
3. Use Flash Tool v5.1516 and MT6580_Android_scatter.txt chose Download only
4. put capble in to the phone
5. Finish
6. Reboot into recover
Now you can backup and install custom new Rom
7. If you want root use Kingroot
Any one have backup or stock this rom pl post to this toppic.
Click to expand...
Click to collapse
Sir can you port a recovery for my mtk6580 Nougat 7.1 version ice phone i555 device? my recovery partition is showing 10mb in Diskinfo but my stock recovery in only 7.15mb. I'm a noob on this. I tried porting and flash many different custom recovery but non of them worked I'm attaching my boot.img, recovery.img, and the scatter file for you to have a look. I'll be really grateful if you do it for me. I was trying to unlock my bootloader with all the method i found on the internet but every time i do so my phone unlocks but when it restarts i go to developer option by tapping 7 times my oem unlocking shows unticked. Can you please help me with that?
every time i try to flash recovery it gives me an error: PMT changed for the ROM; it must be downloaded. how can i fix it?
---------- Post added at 02:18 PM ---------- Previous post was at 01:22 PM ----------
there is a rom that can be flashed with SPFT?
i'm looking for a i8100_MB_V1.1 Firmware, i can't find anithing about it
---------- Post added at 03:23 PM ---------- Previous post was at 03:21 PM ----------
if anybody can upload his rom it would be very appreciated, even stock, i need my phone to boot up
---------- Post added at 04:13 PM ---------- Previous post was at 03:23 PM ----------
LegendSteve said:
Have you had any luck with this problem yet?
Click to expand...
Click to collapse
same problem here, anybody can help?
Kushal G said:
i brought a clone (KK concept) has excellent full screen display quality and its a perfect clone. but I tried to flash TWRP and got it bricked, status> Dosent turn on, if I plug in battery dosent show any red light, but if I connect it to computer= I hear connecting...4 seconds...and disconnecting SOUNDS ONLY...can I get a stock rom of this model...in cpu z it shows processor as Quad and mt6595.
*Before flashing TWRP*
when I dial *#*#789789#*#* a menu pops up with a list of options one is showing >>' processor hide/show '
if I select hide, in CPUz it shows processor as snapdragon 8xx
if I select show, in CPUz it shows processor as mt6595
can I get the stock rom? if anyone can find out..... its been dead for days... literally I paid 5k for it but its as real as the real deal..
if any one knows pls tell me where can I get rom...no negative coments please..
Click to expand...
Click to collapse
same thing, please help
the only rom that i found is this :
MT6580__samsung__SM-N9500__hero2qltechn__7.0__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55 ( https://www.gsm1x.xyz/2018/07/rom-samsung-sm-n9500-mt6580.html )
but it says "not enough storage". if i remove the userdata thick it flashes but the screen stays gray i'm literally desperate xD
Edit: apparently the gray screen is due to a display driver failure, i need a "ILI9881D-2" compatible rom
Edit2: the phone boots but the screen stays gray. touch works (i hear sound of touches)
i made a thread, please reply https://forum.xda-developers.com/android/help/galaxy-note-8-clone-problem-t3841461
use the attached scatter file, save the attached preloader_hct6580_weg_a_l.bin and recovery.img to the same folder as your rom folder.
I see no scatter file attached :/
Kushal G said:
can u post backup of your rom please. it would help a ton for me
Click to expand...
Click to collapse
Do you still need help or find a way out....???
Any one knows how to update the kernel on this Device ?
does this root method work? i wanted to try but seems like everyone having problems.
Please can this recovery be used for ths clone device?
SM_G950 hero2qltezc. device is rooted.
model: SM-G950
device version: 7.0
device CPU: MT6580
Kernel version: 3.10.0.2828982
Thesame baseband with yours also
Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
File name: A95X_F3_AIR_20191024senk.img
Model: A95X
Variant: F3 Air TV Box 2GB/16GB, 4GB/32GB, 4GB/64GB.
Platform: AMLogic S905x3
System: Android version 9.0
Build number: ampere-userdebug 9 A95X_F3_AIR_M 20191024 test-keys
Note: Use OTA to upgrade to 25th Nov, 2019
Rom Download: img file
Mirror 1
Mirror 2
Flasher software
Amlogic USB Burning Tool v2.1.6
or
Amlogic Burn Card Maker v2.0.2
Hi, I get the following errors after 25 seconds.
please help, Thanks
[14:13:20 415][HUB5-2][Err]--Download file failed, sequence 0
[14:13:20 415][HUB5-2][Err]--usbWriteFile len=4096,ret=-5 error_msg=libusb0-dll:err [_usb_reap_async] reaping request failed, win error: A device attached to the system is not functioning.
[14:13:20 415][HUB5-2][Inf]--Failure : 1, FailureMax : 3
[14:13:20 594][HUB5-2][War]--Reset WorldCup Device Ex
[14:13:30 686][HUB5-2][Inf]--Detect Device remove timeout
[14:13:30 686][HUB5-2][Inf]--Device is connected
[14:13:30 686][HUB5-2][Err]--Download file failed, sequence 0
[14:13:30 686][HUB5-2][Err]--usbWriteFile len=4096,ret=-5 error_msg=libusb0-dll:err [_usb_reap_async] reaping request failed, win error: A device attached to the system is not functioning.
[14:13:30 686][HUB5-2][Inf]--Failure : 2, FailureMax : 3
[14:13:30 865][HUB5-2][War]--Reset WorldCup Device Ex
[14:13:40 954][HUB5-2][Inf]--Detect Device remove timeout
[14:13:40 954][HUB5-2][Inf]--Device is connected
[14:13:40 955][HUB5-2][Err]--Download file failed, sequence 0
[14:13:40 955][HUB5-2][Err]--usbWriteFile len=4096,ret=-5 error_msg=libusb0-dll:err [_usb_reap_async] reaping request failed, win error: A device attached to the system is not functioning.
[14:13:40 955][HUB5-2][Inf]--Failure : 3, FailureMax : 3
[14:13:40 962][HUB5-2][Err]--[0x10103003]Romcode/Initialize DDR/Download buffer/USB transfer error
[14:13:40 963][HUB5-2][Inf]--Close device handle 0x00000810
USB Burning Tool
USB Burning Tool
Disable - Erase bootloader
Did this rom work for someone? any new rom release since this thread?
I'm stuck with my streamer and can't find a normal stock rom
Good Morning!
Do you have the stock rom A95X F3 Slim?
Yes, me to in need for Stock rom A95X F3 Slim... my box has updated on version A95X_F3_SLIM_m-9.0.0-202003091353 and after that update my EON TV app not working(your device is not supported)..
I have tried reseting to scratch system and after fresh start again issue with the apk, tried even an older versions...non are working..
My F3 SLIM notified me of an update today. have you seen yours?
LucasRay30 said:
My F3 SLIM notified me of an update today. have you seen yours?
Click to expand...
Click to collapse
Yes, my F3 Slim updated, it is faster and only one issue, EON mobile apk from market was working ok, but after update it says"This device is not compatible with moblie app" , so i did factory reset of box and still persist problem. So I have download from alternative market EON anroid TV app and istalled( problem is this app need code for verificatin on my provider page account - ok i did this too and it is ok) but why now EON adroid apk from market is not compatible with this updated box...
kronos1 said:
Yes, my F3 Slim updated, it is faster and only one issue, EON mobile apk from market was working ok, but after update it says"This device is not compatible with moblie app" , so i did factory reset of box and still persist problem. So I have download from alternative market EON anroid TV app and istalled( problem is this app need code for verificatin on my provider page account - ok i did this too and it is ok) but why now EON adroid apk from market is not compatible with this updated box...
Click to expand...
Click to collapse
Did you try to download and install the APK from a source other than the Play Store?
https://apkpure.com/br/eon/com.ug.eon.android.tv
LucasRay30 said:
Did you try to download and install the APK from a source other than the Play Store?
https://apkpure.com/br/eon/com.ug.eon.android.tv
Click to expand...
Click to collapse
Yes, and i even tried older versions and no luck..only EON android TV(white icon)apk is working..regular apk from market or any other source is a NO GO
kronos1 said:
Yes, and i even tried older versions and no luck..only EON android TV(white icon)apk is working..regular apk from market or any other source is a NO GO
Click to expand...
Click to collapse
Hi!
i have the same problem!
white icon EON is working, but black dont!
How did you manage to get that Telemach Avtorization code working for your box?
I get error every time!
i have A95 F3 Air box... HBO GO have problem too! Everything else working normaly!
SebiuS79 said:
Hi!
i have the same problem!
white icon EON is working, but black dont!
How did you manage to get that Telemach Avtorization code working for your box?
I get error every time!
i have A95 F3 Air box... HBO GO have problem too! Everything else working normaly!
Click to expand...
Click to collapse
I am starting to think it is because of "update" !! Before update all worked well...For now only stock A95X_F3_SLIM_M-9.0.0-201910281143 version working... after update it screw EON ( did not tried HBO GO )...
My provider is different (it is SBB and code is working)
Flash Problem
I cant go past 1%!!!
non of this roms are for A95X F3 Slim...
Download files - Bitdefender Trojan Warning
When selecting the mirror links to download the files Bitdefender warns of a trojan risk as does Malwarebytes.
I updated the A95X F3 SLIM software and now the EON mobile application does not work, previously with the old software the EON app worked ???
How do I install old software back on the A95X F3 box, where can I get it?
The application normally loads from the google play store, but when the application starts it shows this
http://shrani.si/f/G/Ay/28KQ4uze/img20200405191142.jpg
file is damaged and flashing not work
hello guys
I hope someone could help me recover my box,A95x f3 air its been dead for almost 2 months now.
the box is recognized by the computer and usb burning tool,the light turns blue, but the flashing stops at 3% showing this message Romcode/Switch status/Identify/Error result.
I tried different roms ,even asked the vendor for the stock FW,nothing helped, I tried the sd burning card maker method but it didnt help neither because the box doesnt even boot ,no video output.
I have read in some forums that the Uboot might be corrupted,but unfortunately my knowledge about this is very limited.
any help would be appreciated,thank you.
scarface993 said:
hello guys
I hope someone could help me recover my box,A95x f3 air its been dead for almost 2 months now.
the box is recognized by the computer and usb burning tool,the light turns blue, but the flashing stops at 3% showing this message Romcode/Switch status/Identify/Error result.
I tried different roms ,even asked the vendor for the stock FW,nothing helped, I tried the sd burning card maker method but it didnt help neither because the box doesnt even boot ,no video output.
I have read in some forums that the Uboot might be corrupted,but unfortunately my knowledge about this is very limited.
any help would be appreciated,thank you.
Click to expand...
Click to collapse
You have the usb tool? If not find it.. (DO NOT CONNECT THE BOX) start the tool, add the image file and click start.. Now, using a toothpick press the reset button in the a/v port and while still pressing it connect the box to your pc.. it will automatically start rewriting the firmware..
Have fun
Setting.Out said:
You have the usb tool? If not find it.. (DO NOT CONNECT THE BOX) start the tool, add the image file and click start.. Now, using a toothpick press the reset button in the a/v port and while still pressing it connect the box to your pc.. it will automatically start rewriting the firmware..
Have fun
Click to expand...
Click to collapse
thank you but I already tried that,no luck my box is deeply bricked