{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
File name: A95X_F3_AIR_20191024senk.img
Model: A95X
Variant: F3 Air TV Box 2GB/16GB, 4GB/32GB, 4GB/64GB.
Platform: AMLogic S905x3
System: Android version 9.0
Build number: ampere-userdebug 9 A95X_F3_AIR_M 20191024 test-keys
Note: Use OTA to upgrade to 25th Nov, 2019
Rom Download: img file
Mirror 1
Mirror 2
Flasher software
Amlogic USB Burning Tool v2.1.6
or
Amlogic Burn Card Maker v2.0.2
Hi, I get the following errors after 25 seconds.
please help, Thanks
[14:13:20 415][HUB5-2][Err]--Download file failed, sequence 0
[14:13:20 415][HUB5-2][Err]--usbWriteFile len=4096,ret=-5 error_msg=libusb0-dll:err [_usb_reap_async] reaping request failed, win error: A device attached to the system is not functioning.
[14:13:20 415][HUB5-2][Inf]--Failure : 1, FailureMax : 3
[14:13:20 594][HUB5-2][War]--Reset WorldCup Device Ex
[14:13:30 686][HUB5-2][Inf]--Detect Device remove timeout
[14:13:30 686][HUB5-2][Inf]--Device is connected
[14:13:30 686][HUB5-2][Err]--Download file failed, sequence 0
[14:13:30 686][HUB5-2][Err]--usbWriteFile len=4096,ret=-5 error_msg=libusb0-dll:err [_usb_reap_async] reaping request failed, win error: A device attached to the system is not functioning.
[14:13:30 686][HUB5-2][Inf]--Failure : 2, FailureMax : 3
[14:13:30 865][HUB5-2][War]--Reset WorldCup Device Ex
[14:13:40 954][HUB5-2][Inf]--Detect Device remove timeout
[14:13:40 954][HUB5-2][Inf]--Device is connected
[14:13:40 955][HUB5-2][Err]--Download file failed, sequence 0
[14:13:40 955][HUB5-2][Err]--usbWriteFile len=4096,ret=-5 error_msg=libusb0-dll:err [_usb_reap_async] reaping request failed, win error: A device attached to the system is not functioning.
[14:13:40 955][HUB5-2][Inf]--Failure : 3, FailureMax : 3
[14:13:40 962][HUB5-2][Err]--[0x10103003]Romcode/Initialize DDR/Download buffer/USB transfer error
[14:13:40 963][HUB5-2][Inf]--Close device handle 0x00000810
USB Burning Tool
USB Burning Tool
Disable - Erase bootloader
Did this rom work for someone? any new rom release since this thread?
I'm stuck with my streamer and can't find a normal stock rom
Good Morning!
Do you have the stock rom A95X F3 Slim?
Yes, me to in need for Stock rom A95X F3 Slim... my box has updated on version A95X_F3_SLIM_m-9.0.0-202003091353 and after that update my EON TV app not working(your device is not supported)..
I have tried reseting to scratch system and after fresh start again issue with the apk, tried even an older versions...non are working..
My F3 SLIM notified me of an update today. have you seen yours?
LucasRay30 said:
My F3 SLIM notified me of an update today. have you seen yours?
Click to expand...
Click to collapse
Yes, my F3 Slim updated, it is faster and only one issue, EON mobile apk from market was working ok, but after update it says"This device is not compatible with moblie app" , so i did factory reset of box and still persist problem. So I have download from alternative market EON anroid TV app and istalled( problem is this app need code for verificatin on my provider page account - ok i did this too and it is ok) but why now EON adroid apk from market is not compatible with this updated box...
kronos1 said:
Yes, my F3 Slim updated, it is faster and only one issue, EON mobile apk from market was working ok, but after update it says"This device is not compatible with moblie app" , so i did factory reset of box and still persist problem. So I have download from alternative market EON anroid TV app and istalled( problem is this app need code for verificatin on my provider page account - ok i did this too and it is ok) but why now EON adroid apk from market is not compatible with this updated box...
Click to expand...
Click to collapse
Did you try to download and install the APK from a source other than the Play Store?
https://apkpure.com/br/eon/com.ug.eon.android.tv
LucasRay30 said:
Did you try to download and install the APK from a source other than the Play Store?
https://apkpure.com/br/eon/com.ug.eon.android.tv
Click to expand...
Click to collapse
Yes, and i even tried older versions and no luck..only EON android TV(white icon)apk is working..regular apk from market or any other source is a NO GO
kronos1 said:
Yes, and i even tried older versions and no luck..only EON android TV(white icon)apk is working..regular apk from market or any other source is a NO GO
Click to expand...
Click to collapse
Hi!
i have the same problem!
white icon EON is working, but black dont!
How did you manage to get that Telemach Avtorization code working for your box?
I get error every time!
i have A95 F3 Air box... HBO GO have problem too! Everything else working normaly!
SebiuS79 said:
Hi!
i have the same problem!
white icon EON is working, but black dont!
How did you manage to get that Telemach Avtorization code working for your box?
I get error every time!
i have A95 F3 Air box... HBO GO have problem too! Everything else working normaly!
Click to expand...
Click to collapse
I am starting to think it is because of "update" !! Before update all worked well...For now only stock A95X_F3_SLIM_M-9.0.0-201910281143 version working... after update it screw EON ( did not tried HBO GO )...
My provider is different (it is SBB and code is working)
Flash Problem
I cant go past 1%!!!
non of this roms are for A95X F3 Slim...
Download files - Bitdefender Trojan Warning
When selecting the mirror links to download the files Bitdefender warns of a trojan risk as does Malwarebytes.
I updated the A95X F3 SLIM software and now the EON mobile application does not work, previously with the old software the EON app worked ???
How do I install old software back on the A95X F3 box, where can I get it?
The application normally loads from the google play store, but when the application starts it shows this
http://shrani.si/f/G/Ay/28KQ4uze/img20200405191142.jpg
file is damaged and flashing not work
hello guys
I hope someone could help me recover my box,A95x f3 air its been dead for almost 2 months now.
the box is recognized by the computer and usb burning tool,the light turns blue, but the flashing stops at 3% showing this message Romcode/Switch status/Identify/Error result.
I tried different roms ,even asked the vendor for the stock FW,nothing helped, I tried the sd burning card maker method but it didnt help neither because the box doesnt even boot ,no video output.
I have read in some forums that the Uboot might be corrupted,but unfortunately my knowledge about this is very limited.
any help would be appreciated,thank you.
scarface993 said:
hello guys
I hope someone could help me recover my box,A95x f3 air its been dead for almost 2 months now.
the box is recognized by the computer and usb burning tool,the light turns blue, but the flashing stops at 3% showing this message Romcode/Switch status/Identify/Error result.
I tried different roms ,even asked the vendor for the stock FW,nothing helped, I tried the sd burning card maker method but it didnt help neither because the box doesnt even boot ,no video output.
I have read in some forums that the Uboot might be corrupted,but unfortunately my knowledge about this is very limited.
any help would be appreciated,thank you.
Click to expand...
Click to collapse
You have the usb tool? If not find it.. (DO NOT CONNECT THE BOX) start the tool, add the image file and click start.. Now, using a toothpick press the reset button in the a/v port and while still pressing it connect the box to your pc.. it will automatically start rewriting the firmware..
Have fun
Setting.Out said:
You have the usb tool? If not find it.. (DO NOT CONNECT THE BOX) start the tool, add the image file and click start.. Now, using a toothpick press the reset button in the a/v port and while still pressing it connect the box to your pc.. it will automatically start rewriting the firmware..
Have fun
Click to expand...
Click to collapse
thank you but I already tried that,no luck my box is deeply bricked
Related
Hi,
A thread has been created and was deleted.. so, as I tried it out, here are the steps..
Disclaimer : I m not responsible and report what has been working for my case which was as well leading to no data lost, no wipe so far.
Note : Having an alternate recovery (TWRP instead of 3e) would avoid a successfull any future phone update done through the menu. Updates will then have to be pushed with SP_Flash_Tool
Thanks : doogeemobile.com / original xda thread by gramolitero
What could be needed : -> Same tools and steps as the Doogee X5, except the Scatted for MT6735 and recovery.img files.
SP_Flash_Tools and Doogee X5 procedure
TWRP Recovery file, in English
+ Attached Scatter for Mediatek MT6735
- Optional- Doogee X5Pro Rom
Steps :
- Download/Unpack FlashTools, run Flash_tool.exe as an Administrator
- Select "Download Agent" and input MKT_AllInOne_DA.bin
- Select "scatter-Loading" and search MT6735_Android_scatter.txt
- Select "Download Only"
- Uncheck all boxes
- Checkmark and change the path of recovery file to be replaced.
- Make sure the connection is made through USB in the options (See screenshot)
- Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
- Press “Download” button to start and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles in a new window is then displayed.. -> OK
- Finish !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Once this recovery has been done.
- Boot the phone with Power and Vol+ simultaneously.
- Select "Recovery" with VolUp key, validate with VolDown key.
- Plug the phone to the PC, and drop the BETA-SuperSu.v220 on the SD Card
- Install SuperSU then reboot.
The phone is now rooted.. place to Xposed, or any apps through the TWRP recovery.
Regards
Pierrick
hi,
can you please post all files here because i can't download it from that link you posted here ( 01-Android_CDC_Driver.zip, 02-SP Flash Tool+Scatter File.rar, 03-TWRP Recovery for DoogeeX5.rar )
thx
found all files, but when i try instaling su i got error in recovery, my phone have R08 rom and idk if that is problem?
i rooted my phone, only i was using older version super su 2.46 i think, and i changed name to update, after that phone was rooted
finally someone recreate the thread:victory:
can it be an official dev thread of x5/x5pro? following the russian thread is really hard even with gTrans
days ago they released r09 firmware...hv anyone try it?
im still on r08 modded
lucaviend said:
finally someone recreate the thread:victory:
can it be an official dev thread of x5/x5pro? following the russian thread is really hard even with gTrans
days ago they released r09 firmware...hv anyone try it?
im still on r08 modded
Click to expand...
Click to collapse
i have 09 but didn't root again, i don't see any difference from 08
i just tried r09 today...yes i can felt the different from r08
i hope someone can make a cusom rom for this phone
Thanks a lot
i'm on R09 and I'm rooted already - it was easy as a breeze - it's time for LSpeed Optimizer.
TiA
nanotech17 said:
i'm on R09 and I'm rooted already - it was easy as a breeze - it's time for LSpeed Optimizer.
TiA
Click to expand...
Click to collapse
yup the root process is still same as before...
i'v flash L speed and bravia 4
Sooo, im from Canada and it won't work over here cause the Band Frequencies are not selected. I can see the right one I need to select, but they are blacked out. Will rooting the phone unlock those bands so I can choose the right frequency for Canada?
Love the phone, just whish I could use it here
rooting will not change phone's band freq
why is no custom rom for this phone. . .so sad -_-
Hold your horses boys. It's a new phone so it will take some time until there is a custom ROM.
Hopefully someone will port the CyanogenMod to this nice mobile.
Something else, has anyone tried the OTG functions? Can it read a thumb drive properly? I hope it has V4L2 drivers when I receive mine.
Does the twrp recovery actually work. I've flashed it to my phone and it doesn't work. Has anybody got any other links. Also the website where the recovery file is linked is blocked by windows
Worked perfectly, thank you!
If this helps anyone, I had issues getting the drivers installed, I followed this thread here; http://forum.xda-developers.com/showthread.php?t=2180436
It kept appearing and disappearing in Device manager, just click it as soon as it appear and then install the drivers. If it disappears it does not matter at that point
get a good good news veryone...
http://www.gizmochina.com/2015/12/23/oukitel-k6000-cm12-1-rom/
CM12.1 mt6735 link
https://mega.nz/#!GN0lWI7A!M0ZSROTp7c1gAP7B930vRj7m3blh0tF79gpuMff4-pk
edit: my wrong...it's cm12.1
my first read i thought it was cm13 marshmallow LOL
but...it's cool if CM rom can be ported for us
Hi
I need some help, the Doogee SW "SP_Flash_Tools and Doogee X5 procedure" is not available anylonger on thir server.
Anybody an idea how to get it?
Or can somebody upload, please.
Thanks and Merry X-MAS
linolino
~~~
Update I used the Names on the Doogee website to google for files.
-Found suiting USB Drivers
-found flash tool
With the OPs description and cross checking Doogees (non Pro) description
I was able to root - Thanks.
lucaviend said:
get a good good news veryone...
http://www.gizmochina.com/2015/12/23/oukitel-k6000-cm12-1-rom/
CM12.1 mt6735 link
https://mega.nz/#!GN0lWI7A!M0ZSROTp7c1gAP7B930vRj7m3blh0tF79gpuMff4-pk
edit: my wrong...it's cm12.1
my first read i thought it was cm13 marshmallow LOL
but...it's cool if CM rom can be ported for us
Click to expand...
Click to collapse
want to flash a rom of doogee x5 pro from twrp.
does anyone got the zip file to upload[COLOR="Silve[COLOR="Silver"]
---------- Post added at 01:13 AM ---------- Previous post was at 01:05 AM ----------
[/COLOR]i need the zip file to flash doogee x5 pro from twrp recovery
can anyone upload the file please
linolino said:
Hi
I need some help, the Doogee SW "SP_Flash_Tools and Doogee X5 procedure" is not available anylonger on thir server.
Anybody an idea how to get it?
Or can somebody upload, please.
Thanks and Merry X-MAS
linolino
~~~
Update I used the Names on the Doogee website to google for files.
-Found suiting USB Drivers
-found flash tool
With the OPs description and cross checking Doogees (non Pro) description
I was able to root - Thanks.
Click to expand...
Click to collapse
u can check here...doogee x5pro russian forum
http://4pda.ru/forum/index.php?showtopic=699029
use gTrans
reisrm said:
want to flash a rom of doogee x5 pro from twrp.
does anyone got the zip file to upload[COLOR="Silve[COLOR="Silver"]
---------- Post added at 01:13 AM ---------- Previous post was at 01:05 AM ----------
[/COLOR]i need the zip file to flash doogee x5 pro from twrp recovery
can anyone upload the file please
Click to expand...
Click to collapse
what zip? cm12.1?
it's there via mega but i dont if it work for x5pro because it's originally for oukitel k6000 (same processor)
Most of the files are missing/Links broken at doogeemobile.com/blog/doogee-x5-phone-root-guide.
Tanix TX9 Pro S912 Powered Android 7.1.2 Box
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Main Features:
● It runs on the Android 7.1, which is stable to use. You can connect to a world of content and entertainment at home with the box
● Amlogic S912 Octa-core ARM Cortex-A53 64bit CPU. With high-performance CPU known for a fast speed
● Bluetooth 4.1 connectivity. Easy pairing with most Bluetooth-enabled devices
● Support dual band WiFi of 2.4G and 5.8G, with 1000M LAN port
Full product description available on TANIX WEBSITE.
OFFICIAL FIRMWARES FROM TANIX
1/November/2017 Firmware: TX9pro-20171101 .rar
22/December/2017 Firmware: TX9pro-20171222 .img
04/January/2018 Firmware: TANIX_TX9_PRta_20180104.zip
05/February/2018 Firmware (IMG file):
TX9pro-20180205 .img
05/February/2018 Firmware (ZIP file):
TX9PRO-ota-20180205 .zip
Install using official TANIX AmLogic USB Burning Tool located at Tanix Official Website.
Working TWRP with TX9 Pro
Download link: TWRP TX9 Pro
How to Install:
Put zip file on MicroSD card and insert in TF slot in BOX.
Turn off BOX.
Insert toothpick on reset button and keep pressed.
Connect HDMI and Power adapter.
Keep reset button pressed while boot loading.
Stop pressing when Android recovery shows up.
Select "Apply update from EXT" with the remote.
Browse for the zip and install.
Thank you!!!!
Updated new January 2018 firmware.
Hey,
TWRP boots up but when try to flash it perm says image too big. Anyone got a good img to flash via TWRP or how do i make my own?
Thanks .
d3m3 said:
Hey,
TWRP boots up but when try to flash it perm says image too big. Anyone got a good img to flash via TWRP or how do i make my own?
Thanks .
Click to expand...
Click to collapse
What recovery image did you use?
Hey, thanks for the reply. I used the one attached in the Op post. It boots up just fine. But cant manage to flash it perm.
how to you update via ota ?
where do you go is it an app or ..?
which app (i tried setting/about system/ update) and also the update app but say im up to date and like may 2017 or something ?
duboisbrian said:
how to you update via ota ?
where do you go is it an app or ..?
which app (i tried setting/about system/ update) and also the update app but say im up to date and like may 2017 or something ?
Click to expand...
Click to collapse
Download the AmLogic USB Burning Tool from Tanix Website.
Then follow the same directions from Tanix Website (it's a different board, but same directions).
Be aware this erases everything on it.
thank you
im aware of how to update
that wasnt my question ? my question was how does the box receive ota (over the air) updates
duboisbrian said:
thank you
im aware of how to update
that wasnt my question ? my question was how does the box receive ota (over the air) updates
Click to expand...
Click to collapse
According to TANIX Support, the box doesn't receive OTA updates, you need to update manually.
Has anyone updated firmware via TWRP? I've installed TWRP via booting into andorid recovery but it doesn't seam that TWRP has been installed after installation procedure: it just runs into TWRP and I can't boot into in TWRP in any way other that repeating procedure with pushing reset button with plugging the power cable...
Help
Hi
I've just received my box and made the firmware update but blocked my box. Now i only get a blue light on top. No display. No answer from the reset button trying to reset it connected to tv or connected to pc for the burning tool.
Any sugestion?
This BOX is very good
Tanix TX9 PRO:
Antutu 7.0.2 Score:
49816
CPU: 25718
GPU: 4686
UX: 15362
MEM: 4050
BTW... Xposed worked...
... TWRP 3.1.1.1 worked (https://forum.xda-developers.com/showpost.php?p=74831127&postcount=2)
I changed my TX9 box a bit. Firmware 04.01.2018 ...
Instead of the Tanix Launcher, I installed the ALICE UX Launcher.
I have Xposed installed + Gravity BOX to make the last tasks visible (double click the HOME button) and added a RAM bar. The clock is now in the middle and I have removed the battery icon.
I do not understand why these functions are not delivered directly.
In the ALICE UX launcher you can see and close the recently opened tasks on the left side, but if I press ALT + TAB on my keyboard, will the last tasks still be displayed there, even though they have been terminated via the ALICE UX launcher?!? !
And I also updated the KODI app to 17.6.
I was able to take Xposed + TWRP 3.1.1.1 + ALICE UX from the smaller Tanix Tx3 mini.
zusatzmetall said:
I changed my TX9 box a bit. Firmware 04.01.2018 ...
Instead of the Tanix Launcher, I installed the ALICE UX Launcher.
I have Xposed installed + Gravity BOX to make the last tasks visible (double click the HOME button) and added a RAM bar. The clock is now in the middle and I have removed the battery icon.
I do not understand why these functions are not delivered directly.
In the ALICE UX launcher you can see and close the recently opened tasks on the left side, but if I press ALT + TAB on my keyboard, will the last tasks still be displayed there, even though they have been terminated via the ALICE UX launcher?!? !
And I also updated the KODI app to 17.6.
I was able to take Xposed + TWRP 3.1.1.1 + ALICE UX from the smaller Tanix Tx3 mini.
Click to expand...
Click to collapse
Did you install TWRP permanently? How so?
@Manimecker:
No, i can´t install it permanently. It is just a .zip file.
duboisbrian said:
how to you update via ota ?
where do you go is it an app or ..?
which app (i tried setting/about system/ update) and also the update app but say im up to date and like may 2017 or something ?
Click to expand...
Click to collapse
I upgraded my TX9 to 20180104 this way using the built-in application Update / Backup
Steps:
1. Download the archive with the firmware from
https://www.chinagadgetsreviews.com...-2-stock-firmware-tanix-tx9-pro-tv-box-3.html
2. - if downloaded file has .rar extension 710MB (usually contains 3 files: firmware .zip + recovery.img + factory_update_param.aml) - unpack from it an archive with firmware file (TANIX TX9 PRO ota 20180104.zip)
or
- if downloaded file has .zip extension (TANIX TX9 PRO ota 20180104.zip - 704MB) can be used directly
3. Place the file to TX9 internal memory (root or downloaded files folder - simply any place where you can find the file )
4. Run Update / Backup through the Applications menu.
5. Click Select, wait until box scans all the files with the .zip extension on your device
6. Select the file with the firmware from the list and click update (should be TANIX TX9 PRO ota 20180104.zip)
Next, the machine copies the files and reboots, after the reboot, the system will be updated.
7. After upgrade factory reset is recommended
d3m3 said:
Hey, thanks for the reply. I used the one attached in the Op post. It boots up just fine. But cant manage to flash it perm.
Click to expand...
Click to collapse
Bump!
I always have boot problems. stick with the boot logo.
I have to pull the power cable and start again.
sometimes the system boots up to the launcher and stays there.
maybe it's related to xposed?!?!
does anyone else have these boot problems?
No problems with my box - stock rom 20180104
I bought the A95X F3 after I had lots of fun from the A95X F3 which should be inferior, anyway, I received a bricked the device, and my refund request has been turned down even though I completely shows the TV not booting etc.
Anyways, as a last resort to not throw my $40, I'm trying to revive the device. I have previously re-flashed a ROM I've found for the A95X F3, and it actually worked, I managed to boot and everything, it worked just fine for around 2 weeks and then I noticed that it got stuck. I tried to disconnect and reconnect the power cable to the TV box, and since then nothing happens...I can see some red light, but no boot, nothing.
I tried re-flashing again, but it doesn't seem to work this time. Previously I had an issue which I had to uncheck the erase flash and erase bootloader options, and afterwards it simply worked, but this time even if I'm unchecking this it doesn't seem to work and gets stuck on Download DDR on 1%(which is what happened with the erase flash and bootloader checked).
Even though it's unchecked, I do see the status of "erasing bootloader" in the beginning, so I wonder if that could somehow be the reason for that, but I can't understand why would this happen?
Anyway, kinda lost, would love to get some suggestions on how to fix this if possible.
These are the logs:
[20:25:38 565][HUB1-2][Inf]--------------ERASE BOOTLOADER------------
[20:25:38 565][HUB1-2][Inf]-------------Download DDR.USB-----------
[20:25:38 565][HUB1-2][Inf]--Close device handle 0x00000464
[20:25:38 616][HUB1-2][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#8&1bffc6b3&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000464
[20:25:38 667][HUB1-2][Inf]--3-2-0-0
[20:25:38 667][HUB1-2][Inf]--Control write pll reg1 0xfffa0000:0x000000b1
[20:25:39 169][HUB1-2][Inf]--Control write pll reg1 0xfffa0000:0x00005183
[20:25:39 670][HUB1-2][Inf]--Control write pll reg1 0xfffa0000:0x000000b1
[20:25:40 171][HUB1-2][Inf]--Control write pll reg1 0xfffa0000:0x00005183
[20:25:40 672][HUB1-2][Inf]--Write initial succeed
[20:25:40 672][HUB1-2][Inf]--Upload encrypt at 0xff800228
[20:25:40 672][HUB1-2][Inf]--ulValue = 0x20444142
[20:25:40 672][HUB1-2][Inf]--Read encrypt value succeed
[20:25:50 673][HUB1-2][Err]--Download file failed, sequence 0
[20:25:50 673][HUB1-2][Err]--usbWriteFile len=4096, ret=-116 error_msg=libusb0-dll:err [_usb_reap_async] timeout error
[20:25:50 673][HUB1-2][Inf]--Failure : 1, FailureMax : 3
[20:25:50 673][HUB1-2][War]--[20:26:00 675][HUB1-2][Err]--Download file failed, sequence 0
[20:26:00 675][HUB1-2][Err]--usbWriteFile len=4096, ret=-116 error_msg=libusb0-dll:err [_usb_reap_async] timeout error
[20:26:00 675][HUB1-2][Inf]--Failure : 2, FailureMax : 3
[20:26:00 675][HUB1-2][War]--[20:26:10 676][HUB1-2][Err]--Download file failed, sequence 0
[20:26:10 676][HUB1-2][Err]--usbWriteFile len=4096, ret=-116 error_msg=libusb0-dll:err [_usb_reap_async] timeout error
[20:26:10 676][HUB1-2][Inf]--Failure : 3, FailureMax : 3
[20:26:10 678][HUB1-2][Err]--[0x10103003]Romcode/Initialize DDR/Download buffer/USB transfer error
[20:26:10 678][HUB1-2][Inf]--Close device handle 0x00000464
Click to expand...
Click to collapse
This is what it gets stuck on:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
msacco4 said:
I bought the A95X F3 after I had lots of fun from the A95X F3 which should be inferior, anyway, I received a bricked the device, and my refund request has been turned down even though I completely shows the TV not booting etc.
Anyways, as a last resort to not throw my $40, I'm trying to revive the device. I have previously re-flashed a ROM I've found for the A95X F3, and it actually worked, I managed to boot and everything, it worked just fine for around 2 weeks and then I noticed that it got stuck. I tried to disconnect and reconnect the power cable to the TV box, and since then nothing happens...I can see some red light, but no boot, nothing.
I tried re-flashing again, but it doesn't seem to work this time. Previously I had an issue which I had to uncheck the erase flash and erase bootloader options, and afterwards it simply worked, but this time even if I'm unchecking this it doesn't seem to work and gets stuck on Download DDR on 1%(which is what happened with the erase flash and bootloader checked).
Even though it's unchecked, I do see the status of "erasing bootloader" in the beginning, so I wonder if that could somehow be the reason for that, but I can't understand why would this happen?
Anyway, kinda lost, would love to get some suggestions on how to fix this if possible.
These are the logs:
This is what it gets stuck on:
Click to expand...
Click to collapse
You have the usb tool? If not find it.. (DO NOT CONNECT THE BOX) start the tool, add the image file and click start.. Now, using a toothpick press the reset button in the a/v port and while still pressing it connect the box to your pc.. it will automatically start rewriting the firmware..
Have fun
I found the solution.
msacco4 said:
I bought the A95X F3 after I had lots of fun from the A95X F3 which should be inferior, anyway, I received a bricked the device, and my refund request has been turned down even though I completely shows the TV not booting etc.
Anyways, as a last resort to not throw my $40, I'm trying to revive the device. I have previously re-flashed a ROM I've found for the A95X F3, and it actually worked, I managed to boot and everything, it worked just fine for around 2 weeks and then I noticed that it got stuck. I tried to disconnect and reconnect the power cable to the TV box, and since then nothing happens...I can see some red light, but no boot, nothing.
I tried re-flashing again, but it doesn't seem to work this time. Previously I had an issue which I had to uncheck the erase flash and erase bootloader options, and afterwards it simply worked, but this time even if I'm unchecking this it doesn't seem to work and gets stuck on Download DDR on 1%(which is what happened with the erase flash and bootloader checked).
Even though it's unchecked, I do see the status of "erasing bootloader" in the beginning, so I wonder if that could somehow be the reason for that, but I can't understand why would this happen?
Anyway, kinda lost, would love to get some suggestions on how to fix this if possible.
These are the logs:
This is what it gets stuck on:
Click to expand...
Click to collapse
after 3hrs of head bang I FOUND THE SOLUTION.
use ver 2.1.7.3 usb burning tool.
feed the pasword .bin file under view>password
try temprature range 10-65 .
if range does not work, uncheck the tempurature range check box.
give firmware image path and press start.
then press recovery botton inside audio jack hole, while pressing connect box to PC (using 2.0 usb port of box), AS SOON AS TOOL RECOGNIZES BOX, LEAVE THE RECOVERY BUTTON.
process will start.
this worked for me....... got my box working back.
FILE LINKS ARE GIVEN BELOW
FIRMWARE
A95X F3 rgb
download1127.mediafire.com/as...191017senk.img
USB BURNING TOOL
freaktab.org/693ba67a9b3e3236?download_token=1ddd6134221bf1dd6ec19b855306a54b0473c616ac54524c153793ecc9896938
PASSWORD FILE
forum.freaktab.com/filedata/...2&d=1581683185
@Setting.Out and friends.
I'm using the A95X F3 with another launcher:
1) I can't use widgets (neither with the factory launcher),
2) I can't access the items in the notification bar (neither with the factory launcher).
Any tips, please?
Thank you.
Setting.Out said:
You have the usb tool? If not find it.. (DO NOT CONNECT THE BOX) start the tool, add the image file and click start.. Now, using a toothpick press the reset button in the a/v port and while still pressing it connect the box to your pc.. it will automatically start rewriting the firmware..
Have fun
Click to expand...
Click to collapse
plugging the adapter is not required while flashing?? And I also want to ask whether I should connect a display with it while flashing??
trueAK said:
plugging the adapter is not required while flashing?? And I also want to ask whether I should connect a display with it while flashing??
Click to expand...
Click to collapse
plua is there any specific firmware for version of my box which is 2 GB/16 GB??
karan_rob7 said:
I found the solution.
after 3hrs of head bang I FOUND THE SOLUTION.
use ver 2.1.7.3 usb burning tool.
feed the pasword .bin file under view>password
try temprature range 10-65 .
if range does not work, uncheck the tempurature range check box.
give firmware image path and press start.
then press recovery botton inside audio jack hole, while pressing connect box to PC (using 2.0 usb port of box), AS SOON AS TOOL RECOGNIZES BOX, LEAVE THE RECOVERY BUTTON.
process will start.
this worked for me....... got my box working back.
FILE LINKS ARE GIVEN BELOW
FIRMWARE
A95X F3 rgb
download1127.mediafire.com/as...191017senk.img
USB BURNING TOOL
freaktab.org/693ba67a9b3e3236?download_token=1ddd6134221bf1dd6ec19b855306a54b0473c616ac54524c153793ecc9896938
PASSWORD FILE
forum.freaktab.com/filedata/...2&d=1581683185
Click to expand...
Click to collapse
Can anybody give me link to firmware of a95x f3 air?
Hi everyone i recently bought an X96Q tv box with the allwinner H313 proc. 2GB/16GB rom Android 10.
I am not pleased with its stock rom. to many lags, if i link my G acc and make the updates all the apps stop working or crashes. the netflix app is ancient but its the only thing that is working so i'm searching for something alternative like a LineageOS or anyother. i installed the atv launcher but it still sucks cause of the rom....
i searched everywhere for a h313 compatible rom but with no luck. Is there anyone that could help me?
Thanks in advance
@speedakis your post is fairly new if the purchase is the same send it back. I saw a review comparing that chipset against the H616 saying the latter fixed many of the overheating issues present in the x96. if it's still possible send it back.
unless a dev buys a box and makes it a personal project I don't think we'll see custom roms or a recovery. these aren't popular enough devices to have attracted support.
As attachment there is image with magisk included.
This device is compatibile with other TV BOXes with Allwinner H616 SOC, for example Tanix TX6s - I have tested this rom with success. Bootloader button is hidden inside AV port.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Device is rooted by default and there is SU binary in rom.
To force device to installing image from img file you need run ADB command:
su
reboot efex
Software to flash image is PHOENIX Suite.
after upgrade storage become only 4.7GB.
Help me please
maras77 said:
As attachment there is image with magisk included.
This device is compatibile with other TV BOXes with Allwinner H616 SOC, for example Tanix TX6s - I have tested this rom with success. Bootloader button is hidden inside AV port.
View attachment 5152035
Device is rooted by default and there is SU binary in rom.
To force device to installing image from img file you need run ADB command:
su
reboot efex
Software to flash image is PHOENIX Suite.
Click to expand...
Click to collapse
I do the su
and
reboot efex,
but after I can't flash on PhoenixSuit because it is not detected on that mode.
What should I do?
EDIT: I've managed with PhoenixUSBPro
The same thing has happened to me, the image works but it does not have root, several attempts by adb if it has a su file, but it is not operational and the entire image is denied access.
Well with the magisk manager application I have got root and adb fastboot NDK module.
Hi, Im a newbie here. I have this TV box x96Q_max_ pro and I want to know how to root this device. TIA.
kiklox said:
Well with the magisk manager application I have got root and adb fastboot NDK module.
Click to expand...
Click to collapse
How to root with the magisk manager?
I recently bought a 4GB/64GB X96Q device. It was delivered with an older ROM that had quite some problems. Netflix for example did not work at all and video playback did suffer from lag and stutter.
After I performed an OTA update the internal storage is only 8 GB and one of the USB ports is no longer functioning. After I complained about these problems and mediation of AliExpress the seller was forced to pay me a 50% refund. In the end I only payed €10,24 for the device.
After I flashed the ROM from the link in this topic the device is working much better. Both Netflix and video playback work fine now. I only use the device as a network/DLNA and Netflix player and do not need the internal storage (8 GB is more than enough) and USB ports. There may be much better devices but in this price range the X96Q offers quite a lot of value for money.
can anybody help me how to do a shortcurt in this motherboard?
Is it able to change the launcher and manage some apps with the custom rom ????
You can use any launcher you like.
I currently use a custom version of the ATV Launcher combined with a custom wallpaper.
jw1982 said:
You can use any launcher you like.
I currently use a custom version of the ATV Launcher combined with a custom wallpaper.
Click to expand...
Click to collapse
Can i get the rom
jw1982 said:
I recently bought a 4GB/64GB X96Q device. It was delivered with an older ROM that had quite some problems. Netflix for example did not work at all and video playback did suffer from lag and stutter.
After I performed an OTA update the internal storage is only 8 GB and one of the USB ports is no longer functioning. After I complained about these problems and mediation of AliExpress the seller was forced to pay me a 50% refund. In the end I only payed €10,24 for the device.
After I flashed the ROM from the link in this topic the device is working much better. Both Netflix and video playback work fine now. I only use the device as a network/DLNA and Netflix player and do not need the internal storage (8 GB is more than enough) and USB ports. There may be much better devices but in this price range the X96Q offers quite a lot of value for money.
Click to expand...
Click to collapse
Good afternoon friend. Sorry for my English, I'm Brazilian ...
I found nothing more than this topic about the X96Q as it is a new box, and I also found the standard rom very weak. Could you ask me a question about the exchange?
Do I execute the command via ADB, disconnect the box and then connect it again to recognize it in Phoenix? It's the first time I've done the process, sorry if it's a lay question.
almeidadpx said:
Good afternoon friend. Sorry for my English, I'm Brazilian ...
I found nothing more than this topic about the X96Q as it is a new box, and I also found the standard rom very weak. Could you ask me a question about the exchange?
Do I execute the command via ADB, disconnect the box and then connect it again to recognize it in Phoenix? It's the first time I've done the process, sorry if it's a lay question.
Click to expand...
Click to collapse
Frol where did you get the rom please??
Shiinooda said:
Frol where did you get the rom please??
Click to expand...
Click to collapse
rom is no comment from maras77
do i need to run adb command or installing directly through the phoenix will run? can you say?
PhoenixSuit_V1.10 works quite easily with this box and the rom provided here. Cable usb type-A to A of course.
mestre01 said:
PhoenixSuit_V1.10 works quite easily with this box and the rom provided here. Cable usb type-A to A of course.
Click to expand...
Click to collapse
Do I use the latest TX6S firmware that is on the Tanix website or does it need to be a specific version?
almeidadpx said:
Do I use the latest TX6S firmware that is on the Tanix website or does it need to be a specific version?
Click to expand...
Click to collapse
Well obviously on Tanix website is an "official rom" with no root. The rom in the thread is rooted. With PhoenixSuit_V1.10 you can upgrade the rom without formatting which is a plus.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Home Screen With Apps
^^^NEW Home Screen, Update From Play Store ^^^
Preinstalled Apps
Initial Set Up Screen
Initial Set Up Screen 2
About
New Google Dream X Included
Google Play Protect Certified
Android TV Netflix! (Install Apk From Website)
Aidan's Custom Android TV 9 ROM For MINIX NEO U22-XJ
v8 New Features (25.July.2021)
BASED ON LATEST MI BOX Official Pie Build 3595
Security Patch 5.March.2021
Low Ram False All Roms
Forceencrypt Disabled
Default Volume MAX
New Bootanimation
More Debloating
DPI Set At 320/213
New Welcome (Thanks AcidIce18)
No Remote Pair Screen
More Cleaned & De Bloat
More Tweaks...
v7 New Features (29.April.2021)
BASED ON LATEST MI BOX Official Pie Build 3409
Security Patch 5.January.2021
NEW Mygica ATV495x (maybe more) Version Available
NEW F30UP (maybe more) Version Available
Now Includes App Drawer (Non Tv Apps)
Now Includes File Browser
Now 11 Wi-Fi Versions Available
Cleaned & De Bloat
More Tweaks...
Download
aidansrom.ml
Thanks MINIX for reaching out & sending me a box & remote to play with, as soon as i get the time i will be working on a Android TV rom for this device, Please comment if your interested in testing
Looking forward to the Android TV ROM
Update, Android TV booting, Tried with Mi Box Firmware but this has a freezing issue decoding wmv files, also tried mecool (km1) and MINIX Neo T5 ATV firmware, i will upload some testing versions soon
I did your firmware V4 but power will not turn off control will go up and down volume up and down but will not turn the box on and USB is not working s912 minix neo u9h can you fix USB on your firmware I did flash it but remote will not turn box off
antonio6o6 said:
I did your firmware V4 but power will not turn off control will go up and down volume up and down but will not turn the box on and USB is not working s912 minix neo u9h can you fix USB on your firmware I did flash it but remote will not turn box off
Click to expand...
Click to collapse
someone else reported only the usb c port worked, they used a OTG adaper to use minix USB remote
Testing Version Now Available
Aidan's ROM S922X - Google Drive
drive.google.com
will this work on Beelink GT-King?
The USB flash drive does not work, it can be recognized, but it indicates that the USB flash drive is damaged. But I don't know if it's an isolated case.
szkifen said:
The USB flash drive does not work, it can be recognized, but it indicates that the USB flash drive is damaged. But I don't know if it's an isolated case.
Click to expand...
Click to collapse
I think its broken NTFS, the same fix i tried before didnt seem to work, i still want to convert the stock firmware to android tv, this should result in far fewer bugs but not managed to get it working properly yet
Yo Aidan, I hope you're doing well. I'm considering to buy MINIX NEO U22-XJ and help you with testing. What is the current status for this device and what is the rom based on?
Cheers
p1trson said:
Yo Aidan, I hope you're doing well. I'm considering to buy MINIX NEO U22-XJ and help you with testing. What is the current status for this device and what is the rom based on?
Cheers
Click to expand...
Click to collapse
hi, it is an awesome device and stock firmware is solid and works very well with great video decoding capabilities, my rom is based on the stock firmware and mi box firmware port, means its always posible to return to stock, im learning as i go about all this
Hi Aidan. Does your version actually with on the u22? Also, is it capable of playing hd audio? (Dts-hd, dts-x) or aac 5.1/7.1 correctly?
aidanmacgregor said:
someone else reported only the usb c port worked, they used a OTG adaper to use minix USB remote
Click to expand...
Click to collapse
Yes I know OTG adaper is working I managed to maneuver firmware V7 s912 but still cannot turn on and off. Can you manage to do a little adjustment on your firmware.for The Minix Neo U9h s
sorry still some audio codec issues, but V8 is now available
There is a way to ROOT your firmware, it is only to install apps as if they were from the system, like YouTube and Google TV (or Google play movies in my region)
mekler22 said:
Hi Aidan. Does your version actually with on the u22? Also, is it capable of playing hd audio? (Dts-hd, dts-x) or aac 5.1/7.1 correctly?
Click to expand...
Click to collapse
i suspect there are going to be some audio decode issues, im still learning and is somthing im working on, i dont haveany surround sound to test on either so feedback would be needed
IoriYagami2001 said:
There is a way to ROOT your firmware, it is only to install apps as if they were from the system, like YouTube and Google TV (or Google play movies in my region)
Click to expand...
Click to collapse
i will have a rooting guide available soon
Root Guide Now Available
Hello Aidan;
First thank you for all your work , i successfully update an old Tanix T9( with your other rom).
I own a Odroid N2+ and i would like to test this version on it, but when i want to burn the .img with Etcher, it simply do not work and when i try the Amlogic Burning tool with OTG on the N2+, the device is not recognized.
It would be interesting for me because i currently use Voodik atv version (which works well) but without some codecs its difficult (e.g: Disney+ , 6play).
What can I do to make it testable?
Frodroid said:
Hello Aidan;
First thank you for all your work , i successfully update an old Tanix T9( with your other rom).
I own a Odroid N2+ and i would like to test this version on it, but when i want to burn the .img with Etcher, it simply do not work and when i try the Amlogic Burning tool with OTG on the N2+, the device is not recognized.
It would be interesting for me because i currently use Voodik atv version (which works well) but without some codecs its difficult (e.g: Disney+ , 6play).
What can I do to make it testable?
Click to expand...
Click to collapse
Hmm look like this device uses etcher to flash, i havent seem this before, if you can find some way to unpack the rom you have, take system.PARTITION, product.PARTITION ANd logo.PARTITION From my rom then replace in yours, rickys toolay work, not sure if odrood have a diffrent firmware format